The owner marked missing tiles around him in a 64-chunk surface strate with RenderDistanceChunks=768. Cause: the desired-set vertical clamp used the player's small window (bClampViewToStrate on, ViewDistanceUp/Down=5, margin 3), so at chunk Z=0 only [-5..3] was ever requested; the rest of his strate was never asked for. Second cause: with MaxClipLevel=3 and a two-level sheet span the outer ring is level 5, while the marching-cubes loop stopped at 3, leaving level 4 empty.
The band now follows the player's whole strate plus margin ([-66..3] in the pinned case) and keeps the small window only when there are no strate bounds (inter-strate gap), so the hidden-rock column the clamp exists to avoid does not return. Bridge shells are emitted up to the level below the sheet ring, filling level 4.
Pinned case desired tiles per level, before -> after: l0 343->343, l1 218->218, l2 129->178, l3 80->178, l4 0->178, l5 4801->9586; total 5,571 -> 10,681 (+91.7%). New focused fixture VoxelForgeVerticalStrateReachTest fails before and passes after. Stress repro passes (140.089 m, 4 holds, 0 full stops); strate crossing passes (0 holds, 0 floor overlap).
⚠️ Cost not established: the post-fix perf sample was incomplete and showed a 55.7 s p50 queue wait, which may be the fixture's extreme settings (768 render distance -> 9,586 sheet tiles) or a real backlog. Measure in the owner's world before merging.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
The owner could not do speed runs: the gate stopped the whole pawn whenever streaming fell behind. Measured at 6000 cm/s on 0dd45ca: one 18.9 ms hold followed by terminal non-resume, 4.522 m of a 120 m route. The gate now cancels only downward motion into unresolved ground, keeps horizontal velocity and player control, ignores air and out-of-layout tiles, and requests a blocking support tile at high priority. voxel.CollisionGate (default 1) disables the safeguard for stress runs; it is snapshotted at start-up.
After: stress run PASS -- 4 holds, 1.881924 s total, full_stops=0, 139.947 m of 120 m. Strate crossing PASS with pending_floor_overlap=0 and the lower strate reached. Static perf sanity PASS. Verification budget kept small on purpose (no suite, no exports): the owner's complaint was that a one-line request triggered a thousand tests.
Known, NOT fixed here: the surface-fall repro fails as surface_ground_timeout -- the pawn now lands, but on top of the authored (0,0) entry at Z=799.5 cm instead of dropping to its floor at -150 cm. The gate has released by then; this looks like the entry opening being capped, i.e. the owner's 'surface generation is bugged'. Next round.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
The round was stopped when Windows began refusing to start processes for it (0xC0000142) under memory pressure, before any after-change test run. Treat as a draft: the baseline run happened, the verification did not.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
The owner fell through a surface-only world and hovered in mid-air: log showed 'ready=1 predicted_wait=1' for 50 s. Two causes, both fixed: (1) engaging the gate zeroes velocity, so the predicted-support probe never re-ran and the gate kept waiting on the tile remembered from when the pawn was still moving -- the prediction is now re-derived every tick from the pawn's current pose; (2) a tile the streamer never requests (out of layout, or outside the desired set) could never become ready, so the wait was unbounded -- such tiles are now logged and treated as nonblocking, and any wait is bounded to 2 s with a warning.
Repro added to the harness (surface-fall scenario): before, the pawn stops at Z=1315.9 with collision_gate_prediction_deadlock; after, it reaches the ground in 2.25 s at Z=-45.6. Strate crossing still protected: 145.49 s route, max gate wait 0.109 s (limit 10 s). Perf S/M/S/M 24.265/54.262 and 23.947/53.057 s, within repeat noise. Owner and canonical geometry unchanged (44E7C813 / 94B47A1C).
Known red, pre-existing and unrelated: VoxelForge.Composer.ParameterRoll still reports false box verdicts in the owner's current single-strate surface layout (5 violations, identical in the baseline). Next round.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
The harness's first full suite run showed 16 of 44 tests failing. Two were real defects in the owner's world:
1. ParameterRoll: the tile classifier could certify a box AllAir while the final field is solid there (3 false proofs found, e.g. density -2.092319 at (-192,16,-224)). Cause: the box diagnostic narrowed 'tail reach' to 'air reach', so the swept tunnel FLOOR -- which writes solid -- did not count as reaching the box. A false AllAir skips meshing, i.e. missing floor in game. The classifier now uses the same reach predicate as the final writer (swept chain, floor band, relief, room-mouth envelope) and propagates it through Mixed refinement nodes. Re-run: 1,288,143 lattice samples, 0 violations.
2. VerticalShaftEquivalence: LedgeSpacing and LedgeDepth were missing from the production TLS cache key, so a shaft could reuse stale ledge parameters. Both are now in the key.
The other 14: broken fixtures (missing staged corpus assets, a sampler leaking the shaft TLS marker between queries, stale candidate IDs, a window entirely inside the common tail) or stale expectations after this week's owner decisions (no authored tunnel floor, slope in degrees, rooms owning their interior). No test was deleted or weakened into vacuity; retired legacy comparisons stay as telemetry and the current stack is asserted instead. PassageLandsInOpenSpace now requires a real player-capsule fit in the final density at each authored landing (14/14, worst gradient 0.115723).
Suite: 42 tests green in one run, the two long op-stack sweeps green in serialized filtered runs (the 1800 s launch guard); a harness timeout-recording bug was fixed. Bounded probe exports unchanged (canonical 94B47A1C, owner 44E7C813). ⚠️ Harness perf scenario moved 50.74 s -> 53.58 s worker (+5.6%): the wider reach predicate skips fewer boxes. Measure on the game path and decide before merging.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Tools/VoxelForgeTest.ps1 runs scenarios (canonical, owner, probe, perf, tests, parity) with the known-good flag sets, isolated user/config dirs, serialized launches, an owner-process guard, and a compact result.json + summary.txt instead of 300 MB logs that Codex has to stream. Answers the owner's question 'can the commandlet reflect in-game behaviour': -gameconfig=1 makes the commandlet use the authored settings, and the parity scenario compares per-tile geometry hashes between the commandlet export and the game's streaming path. Parity PASS: 64 commandlet tiles vs 810 game records, no differing tile.
First run of the tests scenario: 44 tests, 28 pass, 16 fail (8 composer, 6 op-stack equivalence, PassageLandsInOpenSpace, StrateParamBlendCoverage). Triage is the next round: stale expectations from the floor removal and the degrees change, versus real defects, especially the legacy-vs-op-stack equivalence ones.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Fr0zkaandClaude Opus 5