The flagged SW demo's ramp (57 carves + 107 support pillars, visibly ribbed) becomes one cubic-Bezier
sweep: closest point by 17-point seed plus 5 Newton steps, a cubic floor profile, a rounded 2.6 m bore,
and a hard floor cap applied after unions and relief that only adds support where the field is air.
Optional resolved cavern-graph records (one room, one edge) enter canonical identity only when present;
their bounds extend World::isTileShapeFree. Reachability passes (L43 control fails), headroom 2.8 m,
floor ripple 1.8 mm (L45 ramp control fails at 17.9 mm), shape limits met; demo off: owner hashes
identical to L45. fast/medium/full PASS. Research R13 (read-only): continuous SDF sweeps along curves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016dhxM43dnWvUu2B5Ph1iG1
Stamp vocabulary v2; the flagged SW demo opens through a side-facing portal and a bent ramp (max 14 deg,
two landings) into a 17 x 15 m chamber with a rock dais. New reachability audit: a capsule surface search
from walkable ground near the arrival mouth to the chamber floor (66 samples, 0 blocked/unsupported); the
buried L43 layout fails it. Demo off: owner hashes identical to L44. fast/medium/full PASS (Clang+GCC).
Research R12 (read-only): composite cavern-graph generator design and slices.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016dhxM43dnWvUu2B5Ph1iG1
Stamp vocabulary v1 (carve ellipsoid/arch, fill pillar/dais) with smooth CSG and seeded relief; the
director resolves records (stable ID, strate, micrometre position, conservative bounds) from
hash(seed, strate, ID) with up to 512 candidates and rejects any that touch a passage mouth, walk corridor,
content face or ceiling/bedrock band; a stamp BVH skips tiles outside all bounds. No requests: canonical
JSON and owner hashes unchanged. --landmark-chamber-demo adds a SW chamber (buried; see review).
fast/medium/full PASS on clean builds. Research R10 (read-only): ore/resource channel design.
Review also records a pre-existing W1/W12 determinism mismatch at a non-spawn camera (L37+, not S14).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016dhxM43dnWvUu2B5Ph1iG1
ResolvedLayoutSnapshotV3::finalize maps each strate's generator and interface once into capability
records (FI gradient air-gap, surface/FI landing support, passage-anchor columns, SW-to-TN floor);
ApplyResolvedStrateBoundaryBand and passage composition read those instead of generator kinds. Derived
records stay out of canonical JSON, so layout identity is unchanged. Owner hashes identical to L41;
fast/medium/full PASS on clean Clang and GCC builds; cost within noise.
Research R9 (read-only): player-visible roadmap refresh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016dhxM43dnWvUu2B5Ph1iG1
SurfaceWorld, FloatingIslands and legacy evaluators sit behind one immutable densityAt adapter held in
a variant (no virtual call per sample); BindResolvedStratumFields builds a sorted strate table at world
setup, so DensityAt, native SW/FI sampling and ClassifyBoxDetailed no longer ask the strate manager per
sample. No arithmetic change: owner hashes identical to L37/L39 at W1/W12. Cost vs L39: FI -0.66%,
SW -1.31% (noise). verify fast/medium/full PASS (full re-run alone: 407 gates).
Research R7: disk cache design for UE5/Windows/multiplayer and a zlib probe (about 1/3 size, 0.1 ms/tile).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016dhxM43dnWvUu2B5Ph1iG1
ShapeWorldInternal.h kept an extra ')' after a diagnostic edit was restored post-build, so the L37
commit did not compile; the fixed build reproduces L37's verified owner-world hashes exactly.
Unreal (uncompiled here): SetHardTransitionFallbackForAssembly is const over a mutable runtime flag
(the adapter calls it through a const manager); the legacy fallback clears the flag; VoxelStrateManager
includes <cmath> for std::llround. Adds research R2 (read-only Unreal compile/behaviour review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016dhxM43dnWvUu2B5Ph1iG1
The passage mouth fade multiplied the signed carve distance by zero, which turned native rock into an
open surface (the reason earlier rounds stamped walk pads at mouths); it now blends between the
uncarved field and the full signed carve. The FI style-0 route followed a lifted grade envelope over
the crater (the "bridge"); it now runs on the rim and follows the native surface. New built-shape and
crease audits with thresholds frozen before the fix (L36 and box controls fail). 24/24 passage rows,
30/30 determinism, 16/16 invariants, 18/18 interface/ring. Unreal: one recipe setter (uncompiled).
Research R1 (read-only, web): ranked proposals for natural walkable mouths, floor-limited carve first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016dhxM43dnWvUu2B5Ph1iG1
The walk tread was built per segment as a one-sided density clamp, so its crossing with the native
field moved at segment joins (L35: 2.25-2.48 cm washboard). Treads now overlap up to 2 m as bounded
signed-distance slabs (0.06 cm residual). The FI mouth's crater detail and tread met without a smooth
join; v23 filters the local field, drops thin isolated solids and smooth-unions the tread with the
terrain. New floor ripple and mouth fragment/crease audits with L35 as failing controls. 24/24
passage rows, 30/30 determinism, 16/16 invariants, LOD0-8 rings; cost within noise.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
The shared passage carve took the minimum of piecewise-linear capsules (scallops at joins) and added
wall relief on regular 8 m / 4 m octaves, which read as evenly spaced ribs. Interior sweep joins are
now Catmull-Rom smoothed and the relief uses irregular rotated 43/29/19 m scales; the natural wobble
remains. New axial ripple audit (0.125 m radius samples, 0.5-8 m periods): beaded control and L34
geometry fail, all 24 passage rows pass. FI mouth tread apron tapered. 30/30 determinism, 16/16
invariants, ring audits LOD0-8 pass; cost within noise.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Route planning for an upper SurfaceWorld failed on long candidate chords over steep relief; chords
are now capped to the arrival/departure radii on an 8 m centre grid with an origin-proximity cost
(21.5 m walk, about 4 deg). The departure passage starts at the SW ground and tunnels down through rock.
FI -> SW -> TN fixture: all 4 styles pass every passage audit on both compilers. FloorProfileBlend
now checks endpoint height/tangent seams (step and tangent-step negative controls detected). Owner
world hashes unchanged; 30/30 determinism; cost within noise.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Band faces now use signed distance to the displaced solid intervals, continuous across bands, so
MC interpolates the interface instead of terracing at density levels. The Gradient amplitude is
restored to width/8 (about 4 m peak-to-peak at 16 m). Ring/terrace audit at LOD0-8 on the FI floor and SW
ceiling passes; negative controls: L30 (rings) and L31 (flat) both fail. Hole/interface audits,
16 passage rows and 24/24 determinism pass. Evaluator 20. Cost vs L31 SW +1.9%, FI +1.5%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
On the real FloatingIslands recipe, column caps sit inside anchor-island rock and native bedrock;
the old check sampled the route foot. The audit now samples each planned cap against the native
field (negative control: a cap moved into air is detected). The audit runner records requested vs
actual recipe and exits on mismatch. All 16 passage rows (4 styles x 2 recipes x 2 compilers) pass.
The readable shader uses a smooth tint. Interim: FI Gradient displacement capped at width/256
(flat floor, no contour rings); restoring real undulation is L32. Evaluator 19.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
The Gradient interface left native solid density in the air-side gap and snapped the face to
voxel levels (concentric ring steps on the FI floor). The owner Gradient path now writes signed
distance both sides; match error RMS 0.36 -> 0.11 m. Band and fade-tile culling cut transition
cost: whole view vs L24 SW +2.7%, FI +0.2%. Evaluator 16. Deterministic across compilers and
workers; interface and passage audits pass. Found: on the real FloatingIslands recipe, the
rock-column connected-ends audit fails (all styles); earlier matrices ran SurfaceWorld twice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
EVoxelStrateTransition from the upper strate shapes the bedrock(N)/ceiling(N+1) interface in the
shared composition layer: Hard flat; Gradient = smooth 2D hash surface (16 m owner width, about 4 m
measured undulation); Interleaved = 3D domain-warped fingered overlap within the width. Each band
keeps >= 2 Core voxels solid; faces return to the seam near passage mouths. Interface audit over
512 m: 0 hole columns for all modes; wider-than-declared and too-thin controls rejected. All passage,
route, proof and validator audits pass; deterministic Clang = GCC. Evaluator 15. Cost +4% SW,
+1.3% FI vs L28. Open: ring-like artifact on the FI floor capture; transition look unverified.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
GenerateMesh scopes passage queries to the tile's sample bounds with a feature AABB BVH plus
per-passage segment BVHs; L9 proof boxes use a passage-bound BVH. Whole view vs L24: FI ~0%, SW
+3.7% (reviewer interleaved). All hashes equal L27; all passage/route/proof audits pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Unsupported passage runs > 12.5 m become a solid relief-bearing column (ceiling/island to
ground, flared base) with the helix inside, for every recipe; FI anchor uses the same path.
All 4 styles x both recipes: 0/0/0, 0 open-air, naturalness pass; no-long-bridge audit (L26
fails it). Deterministic, Clang = GCC. Look approved; cost +35% SW / +19% FI blocks merge (L28).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
All 4 styles x both recipes pass capsule, open-air and naturalness audits, and full-view hashes are
deterministic. But the SW passage crosses 355 m of open SurfaceWorld sky as a ~2 km fragmented rock
ramp, which is not natural. L27 replaces long bridges with a shared ceiling-to-ground rock column.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Fixes the L24 ribbon (owner request). NOT merged: the open-air support gate leaves ~4,000 unsupported
samples on every SurfaceWorld-recipe passage style (TN -> SW), a walkability regression. L26 fixes that
on this branch. See Linux25/REPORT.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Core plans inter-strate passages from each upper strate's FStratePassageConfig for every
generator: Straight / Worm (the new natural default: meander, variable radius, rough walls) /
Spiral / Cascading. A naturalness audit (no >8 m flat runs, >=0.20 m wall relief) fails on L23's
smooth tube. FloatingIslands selects Spiral, with a deterministic unique anchor island (ordinal 2)
joined to the bedrock floor by a rock root. The SW arrival no longer stamps flat shelves.
Capsule audits 0 blocked / 0 unsupported / 0 grade failures, all styles. Full-view hashes
deterministic W1/W8/W12, Clang = GCC (reviewer re-run). Evaluator 10, FI geometry 5.
KNOWN: the FI helix renders as a spiral ribbon in open air around the pillar instead of a tunnel
enclosed in rock; fix next round. Unreal edits uncompiled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
After L22 the FI -> SW passage no longer connected the strates (legacy owner-voxel coordinates,
lower end 23 m above SW), and Core never carved passages through the bands. Now the director
plans passages from the resolved layout (PlanResolvedLayoutPassagesV1; deterministic hash of
seed/strates/connection; placement disk from PassageConfig, 8-24 m around (0,0)); shared
composition applies generator field -> bands -> bounded passage carve and support shelf, opening
the bands only along the tunnel. Mouths bind to the strate routes. Capsule audit: 0 blocked /
0 unsupported (325,962 samples FI, 284,319 TunnelNetwork), negative controls detected; all 8
generator kinds exercised. SW away from the passage is bit-identical. Layout V3, evaluator 9.
Open: look not yet natural (stepped tube in FI void, terraced SW arrival); SW-as-upper route
planning fails; Unreal adapter uncompiled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
StrateLayoutChunkSizeMeters (world setting, default 8 m; owner decision) is resolved once in
the director/adapter and standalone loader; every generator reads the resolved width (no
CHUNK_SIZE / Core-tile inference). Every strate gets solid ceiling and bedrock bands from its
BoundarySealThickness in the shared composition path (diggable by default); faces come from the
shared boundary path. Owner world: FloatingIslands +8..-120 m (128 m, now with a bedrock floor),
SurfaceWorld -120..-632 m (unchanged; full-detail and exact-query hashes equal L21); the 60 m gap is
gone. The strict layout validator passes on the real world, with 0 endpoint dispatch
disagreements. Spawn/benchmark camera derived from route.front. Ledges under the islands gone
(reviewer capture). Evaluator 7, recipe schema 2, layout snapshot 2, FI geometry 4.
Open: SW cap profiles exceed the ceiling band (owner call); transitions still Hard; Unreal
setting/manager/adapter edits uncompiled here.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Core ResolvedLayoutSnapshotV1 (canonical JSON, stable identity): per strate stable ID, generator,
recipe, interior bounds in metres, ceiling/bedrock bands as Core really applies them, transition
mode/width, dispatch provenance. Validator: compat mode reports today's deviations; strict mode
enforces ceiling -> content -> bedrock -> next ceiling (owner rule), two separate bands, nominal
contiguity, interpenetration only within the declared EVoxelStrateTransition width; 7 negative
controls rejected. Findings: SW built at -120..-632 m although the params say -60 m; a 60 m unowned
gap filled by analytic FI fallback; no active bedrock bands; transitions ignored by Core.
All L19 hashes unchanged (28 + 14 crossing runs). The Unreal adapter exports resolved_layout
(uncompiled here).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
FI geometry v3 drops the all-XY lower boundary seal that created false floors (3.5/8 m); the
ceiling comes from the shared VF_ApplyUpperBoundarySeal and AppendStratumBoundaryCeilings path
for every generator, at each strate's own configured upper boundary (owner: every strate has a
ceiling). Far-LOD ceiling continuity: 0 gaps at LOD4-8. SurfaceWorld bit-identical to L14
(14 configs + 24 m crossing); FI deterministic (28-row matrix); route parity and proofs pass.
Unreal: FI geometryVersion 2->3 and the shared upper-seal helper extracted (UBT compile needed on
the owner PC). Open: small ceiling holes; lower-stratum LOD ring steps seen through the FI void.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Region pages fell back to the legacy GetDensityAt evaluator while the base shape used the Core
manifest field, so a tile's density (and sometimes mesh) depended on streaming history. Pages
are now bound to their world's base FStandaloneShapeWorld evaluator before publication; density,
lattice, detail, classification and solid queries all delegate to it. WorldAssemblyEvaluatorVersion
5 -> 6. Route-parity audit: fails on L12 (5/5); after the fix 0 mismatches over 87 tile pairs
(base/page, base/native-only, edited, two histories), 56 exact-query pairs, 2.3M page samples,
4 seeds/recipes. Page-tile proof audit: 1,274 blocks, 0 violations. The spawn and island worlds
are unchanged; crossing output changed as intended. Reviewer interleaved spawn: +1.1% (noise).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Analytic region pages now retain the immutable shared manifest, so LOD1 page tiles get the L9
uniform-block proofs (71.7 -> 5.6 ms per tile). Reviewer W12 no-hash: 24 m crossing 0.898 ->
0.166 s; Luna: 1 km 5.89 -> 1.25 s. Spawn unchanged; all L1/FloatingIslands hashes and the 24 m
crossing hash unchanged (W1/W12).
KNOWN BUG (pre-existing, measured here): the same tile key yields different density from the base
shape (manifest field) than from a region page (legacy field), sometimes different mesh too, so
output depends on streaming history. To be fixed in L13.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Crash: crossing tiles were coalesced into one huge rectangle, and BuildSpatialBins tried to
resize to ~4.3e17 bytes (std::bad_alloc; the L7 32 m failure had the same cause). Analytic
regions now skip unread dense bins and compile in world-aligned 128-voxel pages, published
together; out-of-range keys error before allocation. 24 m, 32 m and 1 km crossings pass
(1 km: 72 pages, peak RSS 700 MiB).
Spawn: World::isTileShapeFree proves LOD0 SurfaceWorld tiles that never read the cave shape;
those start before shape compile, and all others wait. Reviewer W12 no-hash: near ring 0.337 ->
0.159 s, whole view +2.1%. All SurfaceWorld/FloatingIslands hashes unchanged (W1/W8/W12, both
compilers, forced-overlap run). Unreal VoxelWorld.cpp adapter changed but NOT built here.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Step-2 (LOD1) tiles of native SurfaceWorld now prove 8-cell blocks uniform from exact heightfield
column extrema over the padded block (cells + normal halo) and skip their density fill; features,
edits, mixed strata and Unknown verdicts still fill. LOD1 samples 42,875 -> 2,063 per tile.
Audit: 80,502 skipped blocks (3 seeds) + 9,216 island blocks force-filled, 0 violations. All
SurfaceWorld and FloatingIslands hashes unchanged at W1/W8/W12, Clang off and GCC default.
Reviewer interleaved W12, no hashing: whole view 1.439 -> 1.409 s. L8 phase probes removed;
--profile-lod-work and --audit-uniform-block-proofs are opt-in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CSFYgsdW8ejZSyiMf4qRSX
Island-only worker context replaced by a shared worker-local candidate domain
(WorldAssemblyFeatureTileListV1 / ScopedWorldAssemblyFeatureQueriesV1) serving
SurfaceWorld, FloatingIslands and far-shell queries; a per-domain cost hint keeps the
full scan on small plans. Content placement prepares the same queries and skips proven
air: owner island cell p95 7.07 -> 0.24 ms; populated fixture 572 exact placements,
3.27 s -> 29 ms. Full/candidate hashes equal with dropped-feature controls on both
families; S1 default W1/W8/W16 hashes reproduced; Core-off and M2 fixtures pass.
Default contract for future families in ARCHITECTURE 8.23. Run on gpt-6.1-sol medium.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
AVoxelWorld::CoreVoxelSizeCm (default 25, 32 voxels/tile) flows through plan, field,
mesher, content, water, atmosphere, edits and collision. Staged-owner BuildHost passes at
20 cm (SurfaceWorld + islands, W1/W8/W16, anchors, BP edits, collision) with a fixed-25cm
negative control; default-size hashes match round 4; Core off stays legacy 12.5 cm.
Reusable BuildWorldAssemblyFeatureTileListV1; wired into FloatingIslands only so far.
256-island stress: tile p95 112.5 -> 2.0 ms, 0 mismatches, dropped-feature control fails.
Content placement measured (no populated cells): island ground search 7.25 ms/cell vs
legacy 0.29 ms -- open. Outside-review evaluation in Round5/REPORT.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Islands read as separate (91.89% open sky at mid-height), underside cavity closed,
rim teeth were capture shading. Island manifest import + BuildHost proof passed on the
pre-cache tree; M1 SurfaceWorld and M2 V1/V2 gates passed.
Known open: final XY-column cache compiled in the owner build but is unverified;
island LOD0 p95 ~155 ms misses the 133 ms sprint deadline (legacy ~43 ms); the island
manifest only fits the BuildHost fixture layout (owner's world: Core init fails,
empty world) -> round 4 builds plans inside Unreal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Luna, M1 round 4 (resumed after the night stop):
- Cliff: sub-voxel audit (29,929 half-voxel XY columns, min run 3.75 voxels, 0 subvoxel runs;
old taper control exposes 20,963) and a root-line shelf at the two-voxel minimum.
- Horizon slab = aliased LOD8 cap ceiling. The first fix hid the ceiling at LOD8 (challenged:
enclosed, interior-lit strates); now the LOD8 cap is rebuilt deterministically from the
native heightfield, skirts preserved; looking up and out shows the cap present.
- Routes: review manifest with 33 stable-ID route points + capsule/support constraints; capsule
sweep 0 blocked samples / 0 unsupported centres, negative control detected.
- Server path: World::densityAt answers without render meshes. Physics cooking not available
standalone.
- Hashes (evaluator + 2,226-tile stream) identical at W1/W8/W16. LOD8: 4.446 s for 529 tiles,
14.25 M field calls, 165 unknown tiles.
- Captures at 60 fps cap + vsync (owner's GPU coil whine). One cliff probe crossed the ~8 GB
guard (7.69 GiB) and was stopped before capturing.
My review: cap view matches legacy closely, no slab; native cliff is a clean attached ledge
(cleaner than legacy); a few small spikes on the ridge top.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Luna, M1 repair round: the rectangular raised block and the broken cliff shared one cause,
a type-2 solid AABB in the generated plan; it is now a tapered, terrain-following shelf, and
a negative-control audit catches the old box behaviour; seam classification check passes.
Bound audit 298 boxes / 8,046 samples, 0 misses. Evaluator and 120-tile density/mesh/payload/
topology hashes identical at W1/W8/W16. Cave regression: walkability 5,642/5,642, 64/64 tiles.
Legacy mismatch unchanged (0 biome mismatches, 18.14% signs).
Speed (matched workloads): 120-tile full detail 0.089 s native vs 0.625 s legacy; 529-tile
clipmap 3.858 s vs 11.687 s -- 2.29 s above the ~1.57 s aim; LOD8 dominates (165 unknown
tiles, 13.27 M field calls, 10.88 M column-cache misses).
My capture review: coast matches legacy closely; surface clean but a dark flat slab on the far
horizon; cliff shelf renders as a stack of thin plates with back faces showing (sub-voxel
shelf thickness suspected).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Luna, M1 round 1 of 4 (plan in Standalone/ASSEMBLER_M1_REPORT.md):
- Versioned fixed-scale world manifest (the shipped plan format) and the Core block
contract: point evaluation, interval-or-unknown, influence bound, detail envelope, channels.
- Interval audit: 256 boxes / 6,912 samples, 0 missed, 0 unknown; a deliberately false bound
is detected (negative control).
- Native Heightfield2D with biome input: 4,096-point hash fae2721c052aec5c identical at
W1/W8/W16; point queries 2.059 ms vs 62.115 ms legacy -- but NOT a match yet (mean density
error 274 voxels, 2,261 sign mismatches vs the legacy surface). 45 mesh-free Core queries
match direct evaluation exactly. Existing cave world unchanged (walkability, 64/64 tiles).
- Open: collision readiness, a valid full-view timing (viewer captures were occluded/empty;
top-down height maps are the only usable pair).
Also carries the design doc's owner decisions (fixed water; player edits unrestricted, route
law for automatic changes only) and three plugin files + BuildHost scripts that earlier round
commits had missed (also fixed on unreal/core-integration as 2574b56).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Luna, round 5 goal 1 only (stopped by owner decision before the SurfaceWorld port):
- Worm and Cascading passages now pass walkability; the wide floor stays clipped while the
narrow route core stays open.
- Hidden third failure found and fixed: long VerticalShafts diagonal legs were dropped from
Core's spatial bins by a 100,000-bin safety cutoff (invisible to density queries);
conservative bins restore them (18,570/18,570).
- All 15 saved probes pass a walkability-only gate; build-time walkability gate added.
NOT re-verified before the stop: W1/W8/W16 hashes, BuildHost UBT/actor run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Luna, integration round 3, from the owner's four in-game screenshots:
- Capsule rings at the opening and the shaft continuing through the cave room were Core
world defects: the synthetic bore is removed and the opening gets a finite origin room
and floor (solid below). New world version, W1/W8/W16 identical: density
a8bcb72d41092503, mesh 90f29ba15e24579f, payload 82c6b489e7bb7fd7, topology
7b99448a1f844f2c.
- B-side landing and surface: headless coverage found no missing tiles or LOD-transition
gaps (960 / 640 fine tiles compiled after travel); best explained by Core's missing
SurfaceWorld representation. Null-RHI cannot rule out a presentation-only issue.
- Core mode GetBiomeAtWorldLocation now answers (e.g. Biome_Surface_Plain); biome
terrain itself is not generated yet (proposal: native Core SurfaceWorld evaluator).
Owner checked the Step29 viewer himself: the surface strate type is absent there too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Luna: near skirts were CPU-only by implementation gap, not correctness. Ported with
near-resolution refinement and overflow fallback; near-probe preparation split out so
the skirt kernels no longer inline the near field (first attempt: two fxc /O3 compiles
ran 10.5 h and were stopped). Shape compile proven identical at W1/W8/W16.
-SkipCpuDetailBand retired (154/640 skirt audit failures, +174 ms planning).
Audits: hashes W1/W8/W16, walk 5,642/5,642, whole-near 960 tiles + 640 skirt faces
0 sign/topology diffs (one 0.001 cm vertex-key delta), far/thin 0 diffs, both
survivals pass with 2,074 candidates at 7.00 / 7.02 GiB (was ~6.2), ten captures pass.
My runs outside the sandbox (Step28.exe). NOTE the machine was ~25% slower than last
night for every build (step 27 CPU full machine 0.97-1.02 s at night, 1.22-1.29 s now):
0xFF00: CPU 1.337 / 1.291 / 1.295 s; GPU miss 1.337 s;
GPU cached 1.663 / 1.424 / 1.617 s (GPU tiles 1,427 / 2,072 / 1,222)
0xFFFF: CPU 1.221 / 1.231 / 1.236 s (step 27 same session 1.285 / 1.222 s)
GPU cached 1.582 / 1.550 / 1.416, 1.635 / 1.441 / 1.470 / 1.445 s
(GPU tiles vary 593-2,074; timestamps up to ~470 ms)
=> GPU route now slower than the CPU route measured alongside it. Step 27 GPU control
was not clean (both exes load the same precompiled .cso files).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Luna: normal completion path reads the raw vertex count before residency; an
over-cap count or failed readback falls back to CPU meshing. Max seen 18,153 of
19,456 vertices at (2,-9,-4,lod1) -- 1,303 headroom for this seed only.
Consumer map: 320 GPU near, 640 CPU near (skirted), 1,114 GPU far, 152 CPU far.
Exceptions are exported separately from roughness. Opt-in -SkipCpuDetailBand skips
CPU roughness for GPU-owned near visuals (lazy exact reconstruction on query).
Runner gains -AffinityMask (default 0xFF00) and -NormalPriority.
My runs outside the sandbox (Step27.exe, marker removed first):
half machine (0xFF00, BelowNormal), interleaved:
CPU 1.374 / 1.285 / 1.296 s
GPU miss 1.330 s; cached 1.151 / 1.143 / 1.129 s (1,434 GPU tiles)
GPU cached + -SkipCpuDetailBand 1.316 / 1.303 / 1.307 s -- SLOWER: detail apply
331 -> 297 ms, but intervals+signs 112 -> 286 ms (the plan), shape 557 -> 692 ms
full machine (0xFFFF, Normal), interleaved:
CPU 1.004 / 1.015 / 0.974 s
GPU cached 0.931 / 0.930 / 0.925 s -- first sub-second launches
Audits (Luna): hashes w1/w8, walk 5,642/5,642, near (skip) / far 0 sign/topology
diffs vs CPU and WARP, auto + cold survival pass, ten captures pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Luna: shape_compile profiled (8 workers, detail band ~323 ms of ~545 ms over 9.39M
candidates; roughness dominates). Exact vertical roughness endpoint reuse in
ShapeWorldInternal.h, hashes unchanged: ~548-577 -> ~535-548 ms. Overlapping
pipeline/pool with shape or streaming made things slower, so it stays serial (pool
precompile now 4-20 ms). Export starts before the first CPU frame. Marker-miss stall
reproduced and gated differently; the forced-cold survival audit now hits
DXGI 0x887A0005 (device removed) on a timestamp query and is NOT passing. Auto
survival passes (6.16 GB). The vertex count at InitialClipmapReady counts CPU
batches only (GPU-resident tiles excluded) -- confirmed counting, not missing geometry.
My runs outside the sandbox (Step25.exe, marker removed first, interleaved, -Timeline):
CPU 1.329 / 1.295 / 1.318 s
GPU cached 1.152 / 1.170 / 1.137 s, all 1,434 GPU tiles (timestamps 292 / 260 / 356 ms,
max dispatch 19.0 / 15.9 / 75.2 ms)
GPU marker miss 2.015 s -- REGRESSION vs step 24's 1.336 s. CPU had all 2,226 tiles by
~1.3 s, but near_all_tiles_ready waited for the post-view shader warmup
(queue 1,025 ms, finished 1,955 ms; handoff cpu_started=1434 takeover=0).
Audits: hashes w1/w8, walk 5,642/5,642, near 960 / far 1,114 0 diffs vs CPU and
WARP, thin 353, ten captures 2+2 edge pixels as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
ApplyDetailBand claims eight adjacent columns per batch, keeping each column's scalar
order: shape stage ~586 -> ~566 ms in Luna's profile. Hashes w1/w8 identical.
My runs outside the sandbox (Step20.exe, marker removed first, interleaved):
CPU 1.319 / 1.287 / 1.288 s
GPU 1.320 (marker miss, 0 GPU tiles) / 1.244 / 1.215 / 1.219 s (match, ~1,400 GPU)
Shape compile 549-570 ms in both modes. The 669-821 ms gap in cached runs is still
there: export starts only after [ChunkCrossingWork] reports the ~840 CPU tiles
(LOD0-2) finished, so GPU export waits behind CPU meshing on the shared workers.
Slowest GPU tile 1.7 / 18.4 / 27.3 ms in runs b/c/d.
Audits: hashes, walk 5,642/5,642, near 960 / far 1,114 0 diffs vs CPU and WARP,
thin 353, survival 6.14 GB, ten captures as step 18. Far vertex-distance diagnostic:
247 bound failures (max 64.56 cm), unchanged since step 16.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Near LOD0/1 (detail band, relief, root refinement, normals) now evaluated and
meshed on the GPU. 960 near tiles: zero sign/topology differences vs CPU and
WARP, vertex max 0.0049 mm (was 15 cm); far survival audit passes; CPU hashes
44/44 unchanged. Far connector-panel outlier (64.56 cm, LOD8) remains a
tessellation difference, and remote captures show missing far geometry on GPU.
Cold readiness (viewer clock, my interleaved runs): CPU 2.51/2.49/2.40 s,
GPU 5.05/2.68/2.80 s. The ~2.1 s Present stall hit only the first GPU launch.
Viewer spends ~1.13 s before shape compile starts (startup checks), which is
the gap between the 0.95 s benchmark and ~2.4 s on-screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Whole far field on the RX 7900 XTX: 112 ms total (connector rings 61 ms). Cold hybrid 2.303 s vs
all-CPU 2.314 s (within noise): the far field is no longer on the wall-clock critical path.
0 sign/topology differences vs CPU and WARP incl. 127,401 protected and 353 thin-feature cells;
repeat GPU runs identical; far survival passes on GPU meshes; CPU hashes unchanged.
Open: CPU/GPU vertex distance mean 1.15 mm but max 64.56 cm, 247 tiles over the quantisation bound.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Up to 32 tiles per deferred command list, one polled event per batch, no per-tile waits; CPU
upload/enqueue 723 -> 46 ms. GPU far meshes pass far survival (7,200 strata boundaries, 10,976
connectors, 0 missing/holes). But hybrid cold 4.36 s vs CPU 2.29 s: whole-tile GPU timestamps sum to
646 ms (0.58 ms/tile; step 3's 0.03 ms covered part of the work only), divergent per-thread shape
loops; CPU far-input export 1.6 worker-s. CPU 44/44 hashes unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
1,114 of 1,266 far tiles meshed on the GPU; vs CPU and vs WARP: 0 sign/topology differences,
including the protected/thin exception audit; max symmetric vertex distance 0.125 cm; repeat RX runs
identical; GPU field+mesh 0.029 ms/tile average. Strata survival 7,200/7,200, but connector survival
fails (GPU lacks the connector repair panels). Hybrid cold clipmap 5.74 s vs CPU 2.23 s: dispatch and
readback overhead, not compute (~33 ms of GPU work in total).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Seven LOD2-8 tiles: RX 7900 XTX field+meshing 0.335 ms vs CPU generateTile 15.81 ms; repeat runs
bit-identical; CPU W1/W8 44/44 hashes unchanged. Not yet a real gain: rock/air signs still come from
CPU masks for every sample. Viewer does not draw GPU tiles yet; no whole-view timing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- Relief per wavelength band compared with the owner field; the 4-8 and 8-16 voxel bands were lost.
Restored within the partition-of-unity blend; max detail gradient 0.545 (limit 0.55).
- New owner-band gate: fails all six views on de14f00, passes all six now.
- W1/W8 44/44; path hash both directions; routes 5642/5642; stair-distance, ring, thin-sheet,
coarse-panel, far-survival audits pass; bad-shell control fails.
- Cold 1.127 s vs 1.108 s (within spread); nearest-tile readiness 12.20 vs 12.16 ms.
Caveats: the 143-ray GridStair normal audit is at 62.2% vs its 60% limit (was 76.9%); in the tunnel
capture the floor shows a regular dimple pattern, and the passage shaft close-up is still smooth.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- Stairs: cave, floor, strata and passage relief were effectively summed in overlaps (owner ray
~0.94 voxel of displacement); now partition-of-unity weights: -0.288 voxel there, max detail
gradient 0.323 voxel/voxel. High-detail patch scan 133 -> 0; exact midpoint edge roots kept
(removing them: 7,993 bad roots, 46 patches).
- Fins: exposed skirt triangle scan 1,776 -> 0; thin sheets 0; coarse off-surface panels 0.
- Path hash both directions equal; W1/W8 equal; routes 5642/5642; passage detail ratio 0.850;
far survival passes, bad-shell fails; 30-crossing flight: nearest tile 15.1 ms median, 124 ms max.
Caveats seen in the captures: the owner-ray wall has visibly less relief than before; the fin
before/after captures do not show the fins (evidence is the scan only). Cold StreamFullClipmap
0.758 s vs 0.741 s (+17 ms, Luna's interleaved run). Owner to judge: bin\VoxelForgeLookCheck4.exe.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Not verified as a whole. In the tree when Luna's session ended ("model at capacity"):
- fins: LOD seam skirts could hang into tunnel air; skirt triangles are now clipped against the solid
half-space and carry a per-face mask so a host can hide skirts between same-LOD neighbours.
- choppy LOD0 stairs: marching cubes' linear edge interpolation misplaced vertices where the relief
bends within one cell; edge crossings corrected with the exact field (82 patches, midpoint-edge
errors 18,818 -> 3,288); normal halo now ignores the +-4.125 fallback samples.
- an explicit unclamped Core distance query for audits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- Core compiles exact-tile analytic slabs for entering tiles; a Z-column sampler reuses the coherent
noise context along each tile column; the viewer keeps residents and prioritises nearby tiles.
- 30-crossing straight flight: nearest tile ready 15.8 ms median / 27.6 ms max; full crossing wall
121 ms peak; worker CPU per crossing 545 ms median, 834 ms max.
- W1/W8 hashes equal; routes 5642/5642; look, passage, stair, thin-sheet, coarse-panel and far
audits pass; bad-shell control fails; path-hash audit kept.
Cold whole view, measured by me interleaved (busy machine): 1.242 s vs 1.255 s for 3b37d57, parity.
Still open from the owner (LOD0): fins along a strata seam, choppy stair facets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
From the owner's fly-through ("very impressive, in some cases slightly better than the original"):
- Streaming: Core compiles world-aligned fine-detail pages for tiles entering the view and releases
them when they leave; the viewer keeps resident tiles. One chunk crossing: 144 new tiles, 1,822
kept (was a full rebuild). A tile built as a late page hashes identically (density, mesh, payload,
topology) to the same tile from an initial build.
- LOD>=1 fins: off-surface planar connector panels are now checked against the source surface and
projected onto it; coarse audit 0 off-surface panels; far survival passes, bad-shell still fails.
- LOD0 stair patches: 2,630 sign-changing edges had one endpoint at the fixed +-4.125 fallback
(carve surfaces were excluded from distance storage); distances now completed analytically, 462
packed signs corrected; the audit now fails on any sign edge missing either endpoint (0 of 952,997).
- W1/W8 hashes equal; routes 5642/5642; look, passage and far audits pass.
Verified by me, interleaved (8 workers, cold): 1.014 s vs 1.008 s for aeeedaa, no regression.
Open: a chunk crossing still costs ~1.2 s of page compilation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Fr0zkaandClaude Opus 5.5