research: Astra pass 2, whole generation chain cost map (read-only)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016dhxM43dnWvUu2B5Ph1iG1

ARCHITECTURE.md

@@ -1883,8 +1883,9 @@ Each record separates the nominal ceiling, content, and bedrock bands. A strict
 sequence for every strate and requires bedrock(N) to touch the next strate's ceiling(N+1). The two
 bands remain separately owned. Gradient and Interleaved interfaces may declare interpenetration only
 inside their explicit transition zone; Hard has zero effective width. The manager's `TransitionBlendChunks`
-is expressed in owner-chunk metres. Interleaved's existing two-chunk domain warp extends its possible
-fingers beyond the blend width and is recorded separately. Compatibility validation reports current
+is expressed in owner-chunk metres. L21 recorded the older Interleaved allowance as blend width plus
+warp amplitude; L29 now treats the declared blend width as the complete physical crossing allowance.
+Domain warp changes finger placement, but cannot extend overlap beyond that width. Compatibility validation reports current
 gaps, overlaps, ambiguities, inactive/missing bands, and unhonoured transitions while accepting them;
 strict validation rejects them. Core dispatches per-strate recipe fields without applying that
 parameter blend, even though the legacy manager helper implements it. Both band types default diggable,
@@ -1943,6 +1944,7 @@ opens a band; the support strip stays below the player capsule. The lower mouth
 monotone descent from the short route-bound landing tail, whose height may vary with the route.
 Both route and passage audits sample the 0.34 m by 1.76 m capsule, support probes, and grade; the
 negative control compiles the same world without passage carving and must detect a blocked capsule.
+
 The L23 shared-field change is `WorldAssemblyEvaluatorVersion=9`. It does not change the L22 bands
 or any generator's field away from a passage. The L23 report includes exact-query/hash comparisons,
 the blocked control, captures, and the Windows adapter checklist. §8.10's cache, proof, streaming,
@@ -2051,6 +2053,269 @@ proof bounds preserve the L27 output.
 [Linux28 report](Standalone/Research/WorldAssemblerM3/Linux28/REPORT.md)
 records counts, parity, costs and audit caveats.
 
+### 8.46 Honored bedrock/ceiling transitions — World Assembler L29
+
+The upper strate's `EVoxelStrateTransition` controls the shared interface between its bedrock band
+and the next strate's ceiling band in the Core composition path. `TransitionBlendChunks` is converted
+using the resolved layout chunk width (8 m by default). Hard preserves the flat interface. Gradient
+moves the shared surface with a smooth 2D hash field whose peak-to-peak range is at most one quarter
+of the declared width. Interleaved uses a seed/interface/coordinate-keyed, domain-warped 3D hash field
+to set actual overlap between the facing bands from zero to the declared width. The two faces move
+inward by half that overlap; the warp changes finger placement without increasing the crossing
+allowance. Both bands keep authored thickness, and their solid intervals touch or overlap in every
+XY column. Core does not blend unrelated generator fields.
+
+Each boundary band keeps at least **two Core voxels** of solid thickness (0.5 m at the default 25 cm
+voxel size). Strict validation rejects thinner bands and declared interpenetration beyond the
+transition width. The world audit samples a 512 m square XY area, measures actual crossing depth and
+minimum band thickness, and sweeps every non-passage column through both bands at half-voxel spacing.
+Passage columns are excluded from the hole sweep. Near an interface mouth, the shared face returns to
+its nominal height inside the mouth radius plus a 1 m support margin, then fades back to the selected
+transition over 2 m so the authored landing floor remains supported. Negative controls reject a
+transition one micrometre wider than declared and a band one micrometre below the minimum. See
+[`Standalone/Research/WorldAssemblerM3/Linux29/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux29/REPORT.md)
+for audit measurements, hashes, timings, captures and run history.
+
+### 8.47 Ground-bound SurfaceWorld departure routes — World Assembler M3 Linux L33
+
+An intra-strate SurfaceWorld route follows the resolved terrain ground profile. Its route-point Z
+is the ground height plus the player's half-height; the route does not descend to the strate's
+bedrock boundary. Bedrock belongs to the separate inter-strate passage, which begins at the
+SurfaceWorld departure mouth on the ground and tunnels outward and down through native rock and
+the boundary into the next strate.
+
+The old fixed candidate envelope used a 64 m chord and 16 m centre spacing. On the L33 upper-SW
+fixture, replaying that envelope sampled ground from −507.767 to −464.857 m; 366/648 candidate paths
+exceeded the 15° grade limit. The worst failures clustered near the outer west/northwest terrain
+shoulder (up to 79.971°) and the steep approach slopes around the origin. Candidate diagnostics
+separate grade failures from endpoints outside the bounded arrival/departure placement disks.
+The bounded search now limits its longest chord to the two mouth radii minus a 3 m clearance
+margin, checks centres every 8 m, and ranks endpoints near the route anchors. It finds a 21.5 m
+route from (−2.75, 0) to (18.75, 0), sampled on ground and accepted by the full capsule/support/
+grade audit.
+
+The SurfaceWorld departure passage starts at the ground mouth with a 1.5 m portal, then smoothsteps
+to a 3.5 m rock tunnel over 9 m. Its ring is sized and oriented outward from the mouth, so the
+approach does not cut back under the walk route. The `FloatingIslands → SurfaceWorld → TunnelNetwork`
+fixture passes all four passage styles, including both interfaces, capsule clearance, support,
+grade, walkability, naturalness, open-air, column ends, long-bridge and route-binding audits.
+
+`FloorProfileBlend` previously compared each curved floor profile with its straight chord and
+applied a 2-voxel limit. That is a curvature measurement, not a seam measurement. It now checks
+endpoint height and tangent continuity at 0.01 voxel and 0.001 voxel/m; the 3-voxel step and
+0.25 voxel/m tangent-step controls are both detected. SurfaceWorld owner hashes remain identical
+to L32 because the route-mouth, expanded column sizing and short-span support changes apply only
+when SurfaceWorld is the upper strate. No evaluator or recipe version changed.
+
+[`Standalone/Research/WorldAssemblerM3/Linux33/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux33/REPORT.md)
+records the four-style audits, captures, determinism, owner hashes, costs and retries.
+
+### 8.48 Irregular passage-wall relief and grounded tread shoulders — World Assembler M3 L35
+
+L34's owner-SW profile had a 7.438 m radius repeat with 0.0361 m (3.61 cm) amplitude; an independent
+mesh-normal scan also found a 4.750 m period at 0.02682 (1.537°). The geometry came from piecewise
+capsule joins, while broad value-noise bands added a second regular pattern. The shared carve now
+uses Catmull–Rom centerline interpolation on eligible interior segments, excluding short spans and
+terminal controls. Passage walls use deterministic, rotated 43/29/19 m relief with reduced terrain
+band contribution; other `VF_FieldSurfaceRelief` users, including grounded bridge columns, are
+unchanged. The shared evaluator is version 21.
+
+The residual radius scan on owner-SW style 0 measures a 7.062 m period at 0.0109 m (1.09 cm),
+with 0.0044 m (0.44 cm) coherent amplitude. The independent L35 mesh-normal scan passes at 8 m
+and 0.02496 axial amplitude, below its 0.0255 threshold. The ripple audit samples both side-wall
+radii every 0.125 m in 32 m windows, scans 0.5–8 m periods, and rejects amplitudes of 0.035 m or
+more. Its synthetic control uses 2 m radius spheres spaced every 1.5 m; it measures 0.0599 m and
+must fail.
+
+At the FI mouth, the flat apron is the shared passage support tread, not `LandingExtensionQ`, a tile
+edge or a separate support layer. The tread is required by capsule and support probes. L35 gives its
+outer entry shoulder a shallow taper and seeded grain while preserving the supported walk core and
+lower-mouth overlap width. The shallow quarter-weight support-height/radius spline keeps the tread
+continuous without moving its XY footprint.
+
+Cascade routes also replace identical full-depth cosine lobes with a seeded shallow profile on each
+turn. Passage, capsule, support, open-air, bridge, binding, strict layout, capture, determinism, ring,
+and cost evidence are recorded in
+[`Standalone/Research/WorldAssemblerM3/Linux35/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux35/REPORT.md).
+
+### 8.49 Walk-floor washboard and FI mouth naturalness — World Assembler M3 L36
+
+L35's exported owner-SW mid-tunnel floor measured a 7.250 m repeat at 0.02252 m amplitude; its
+upper-SW fixture arrival measured a 1.438 m repeat at 0.02482 m. Both came from segment-built,
+one-sided support treads meeting the native terrain zero crossing at per-segment joins. The floor
+probe samples the exported walk mesh along the resolved route, separately from the wall-radius scan.
+Eligible tread sections overlap by up to 2 m and all sparse route segments now use a bounded
+signed-distance slab, including SurfaceWorld-to-TunnelNetwork routes. This keeps the tread top stable
+across segment joins while capsule-clearance and native-solid gates retain walkability and open air.
+Regular tread tops remain seated 5 cm lower and ease back to 0.20 m within 20 m of a lower landing;
+seeded shoulder grain is removed, and gravity-facing relief is reduced while side-wall and ceiling
+relief remain irregular.
+
+On v23, the same mesh probes measure 7.188 m / 0.00067 m (0.067 cm) on owner-SW and 6.500 m /
+0.00057 m (0.057 cm) on the upper fixture. The density audit checks five 32 m walk-floor windows at
+0.125 m spacing, rejects amplitudes of 0.015 m or more, and detects its beaded control. The FI mouth
+uses a local 2 m symmetric signed-field filter with the route protected and joins route-mouth support
+to native terrain with a 1.5 m smooth signed-distance union. Its mesh audit reduces the L35
+42.27° fade-ring jump to 27.13° and finds no detached component above the 0.0001 m² area floor; one
+8-triangle subthreshold component at 0.0000266 m² is recorded. The evaluator is version 23. Full
+recipe/style audits, route support, open-air, strict layout, legacy validators, determinism, capture and
+paired-cost results are in
+[`Standalone/Research/WorldAssemblerM3/Linux36/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux36/REPORT.md).
+
+### 8.50 Immutable field binding — World Assembler M3 L40
+
+`FStandaloneShapeWorld` now keeps a sorted `FBoundStratumField` table built from the resolved layout
+at world construction. Each entry owns a concrete SurfaceWorld, FloatingIslands, or legacy adapter
+in `FGeneratorFieldAdapterV1`, plus the resolved bounds and native plan pointer. The adapters share
+the immutable `densityAt(x,y,z,out)` shape, while `std::variant` keeps dispatch concrete instead of
+adding a virtual call to every density sample. FloatingIslands keeps its original fixed-point entry
+point for sample evaluation and its boundary parameter table is captured when the adapter is bound.
+
+`DensityAt`, native SurfaceWorld/FloatingIslands evaluation, legacy SurfaceWorld bridging and
+`ClassifyBoxDetailed` select from the bound table. The native adapters no longer ask the manager
+which generator or plan to use per sample; box proof reuses the bound field objects. The existing
+float-to-fixed conversion order, density arithmetic and shared boundary composition remain intact.
+The manager's layout-width value is captured once for the legacy-compatible chunk-index projection.
+
+The legacy adapter is still a compatibility bridge: `UVoxelGenerator::GetDensityAt` retains its
+own manager routing when invoked for legacy SurfaceWorld fields or out-of-plan fallback queries.
+Other shared-composition policy branches and passage/boundary planning remain outside this slice.
+No Unreal adapter or `VoxelWorld.cpp` change was needed, and the evaluator version is unchanged.
+L37/L39 owner hashes are the parity baseline; the L40 report records fast, medium, full and paired
+cost evidence.
+
+### 8.51 Resolved metre layout authority — World Assembler M3 L41
+
+`UVoxelStrateManager::Initialize` now resolves the layout in integer micrometres before passages or
+Core work are scheduled. The configured layout width is rounded once to micrometres; legacy height
+and inter-strate gap counts are multiplied by that width. Each slot stores its half-open physical
+interval `[bottom, top)`, height, transition mode/width, copied passage settings and their physical
+dimensions. The effective world seed is captured in the manager before passage generation.
+
+The historical 8 m layout keeps its old placement: the first upper edge is +8 m, and each authored
+chunk of height or gap is exactly 8 m. `TopChunkZ` and `BottomChunkZ` are floor-based projections of
+the resolved interval, including mathematical floor for negative Z. Season schema v2 still validates
+its aligned top/bottom chunk values and stacked order as before, then maps those accepted projections
+to the same physical intervals. L29's facing ceiling/bedrock bands are derived from these physical
+intervals and the copied transition width, so their metre bounds retain the prior chunk-based values.
+
+The Core adapter builds SurfaceWorld and FloatingIslands bounds, shared-layout bands, and resolved
+passage dimensions from the micrometre fields. FI and SW both receive the same
+`LayoutChunkWidthSubvoxels = round(layoutWidthMicrometres * 256 / coreVoxelMicrometres)`; layout
+conversion does not use the owner/Core scale. Owner/Core ratios remain in the legacy FloatingIslands
+parameter adapter for generator dimensions that are still authored in owner voxels. The manager's
+legacy passage builder converts resolved passage micrometres back to owner voxels only at its legacy
+geometry API boundary.
+
+Chunk coordinates remain in `GetStrateForChunk`, `GetGeneratorTypeForChunk`, chunk-parameter queries,
+season-v2 validation, and legacy generator dispatch because those interfaces accept layout-chunk
+indices. Their values are cached projections from the physical slot bounds. World-Z queries and the
+Core snapshot use the half-open metre intervals. L40's bound Core field table remains the native
+per-sample dispatch path; this migration adds no manager lookup to it. The Unreal manager and adapter
+cannot be compiled in this Linux workspace, so their small source changes still need the Windows
+Unreal build before integration.
+
+### 8.52 Resolved boundary and landing capabilities — World Assembler M3 L42
+
+`ResolvedLayoutSnapshotV3::finalize` materializes runtime capability records from the immutable
+strate/interface fields before sampling begins. The upper interface records whether its Gradient FI
+bedrock air gap remains open and whether a SurfaceWorld-to-TunnelNetwork passage gets the special
+landing support profile. Per-strate passage records carry the existing SurfaceWorld landing profile,
+FloatingIslands route-support behavior, and passage-anchor column center policy. Shared boundary and
+passage composition reads these records; it no longer compares generator-kind strings.
+
+The records are deterministic derivatives of `generator_kind`, `transition_mode`, and the resolved
+adjacent strate, and are omitted from canonical JSON. Those source fields remain in the hashed layout,
+so owner layout IDs and density hashes retain their L41 identity. The upper strate still controls
+Hard/Gradient/Interleaved evaluation; each strate still composes ceiling, content, then breakable
+bedrock. L29 transition samples and the passage-mouth fade arithmetic are unchanged.
+
+`BindResolvedStratumFields` still tests the resolved generator kind once to bind the concrete
+SurfaceWorld, FloatingIslands, or legacy evaluator. Passage planning in `ResolvedLayoutInternal.h`
+also retains generator-specific anchor and default-mouth placement rules; those are outside the
+shared composition boundary policy. No Unreal source changed. See the L42 report for hashes, tier
+results and paired cost measurements.
+
+### 8.53 Shared Core landmark SDF stamps — World Assembler M3 L43
+
+`ResolvedLayoutStampV1` adds a small, version-1 SDF vocabulary to the shared resolved layout:
+carve ellipsoid, carve arch, fill pillar and fill dais. Requests and resolved records use integer
+micrometres and carry a stable ID, strate, position, conservative bounds, half extents, smooth-CSG
+width, bounded irregularity amplitude/wavelength and quarter-turn orientation. A stamp's seeded
+noise and bounded placement offsets derive from `(world seed, strate, stable ID)`; records are
+sorted by stable ID before the layout identity is finalized. If no request is made, the stamp fields
+are omitted from canonical JSON, preserving the no-stamp layout identity and density hashes.
+
+Resolution retries a finite, deterministic set of candidates and rejects a record if its complete
+bound intersects a passage mouth or walk corridor, reaches a strate content face, or overlaps the
+ceiling or bedrock band. The director reports failure if no safe candidate exists. The strict-layout
+negative control forces a candidate onto a route and into a ceiling band and expects both rejections.
+
+`FStandaloneShapeWorld` applies stamps after the shared resolved-strate boundary and passage
+composition. Carves use smooth maximum with the negated stamp SDF; fills use smooth minimum. Seeded
+trilinear value noise adds low-frequency relief without changing the conservative bound. The tile
+query scope builds a BVH candidate list from each tile's sample bounds. Samples in a tile outside
+every stamp box do no stamp SDF evaluation. Box classification marks stamp-intersecting boxes mixed,
+and native-only readiness refuses to skip them.
+
+The `--landmark-chamber-demo` recipe flag adds an irregular ellipsoid chamber, a separate arched
+entrance and a low fill dais in the owner SurfaceWorld strate, about 31 m from the passage arrival
+mouth and off the walk route. It stays disabled by default. Active records carry vocabulary version
+1 in the layout identity, making the demo an explicit world change; no Unreal adapter was added.
+L43's report records the off/on hashes, walk and interface audits, outside-stamp timing, tier
+results, captures and any failed runs.
+
+### 8.54 Opt-in native lattice field — World Assembler M3 R26 slice 1 (Linux L58)
+
+`Core.Lattice.PrimitiveField` is a version-1 recipe selected only for one Maze or VerticalShafts
+strate by `--recipe=lattice --lattice-strate=N`. The legacy generator assets and their default
+dispatch stay unchanged. Planning first binds the actual incoming lower mouth and outgoing upper
+mouth from the resolved passage records, then creates arrival/exit overlap corridors, a mandatory
+four-turn helix and the maze spine; two deterministic dead ends are added after that route. The
+resolved room and edge seeds use `(world seed, strate, recipe version, stable ID)`. An audit control
+translates the helix 20 m away from both route junctions to make the shaft network orphaned.
+
+The prototype helix uses a 6 m centreline radius, 3 m clear width, 5 m pitch, four turns and 2.6 m
+finished floor-to-soffit height. Its centreline descends 20 m over roughly 151 m; the inner-edge
+grade is about 10.0 degrees. The 2.4 m floor-wall smooth-max gives an isolated ideal fillet radius
+of 0.8485 m. A separate 0.4 m feature-union blend prevents adjoining ramps from erasing the tread.
+The swept-clear diameter is 15 m; the conservative padded feature envelope is about 20.6 m (the
+approved approximately 21 m site envelope).
+
+The layout reuses the resolved cavern graph vocabulary. A per-strate opt-in selects the native
+negative-solid/positive-air field; canonical feature order is stable-ID order. Room/corridor bounds
+are indexed by the graph BVH and polyline segments have a nested deterministic BVH for density and
+interval queries. Box classification stays conservative, and `isTileShapeFree` refuses any tile
+that intersects the graph. The L58 pipeline audits the composed field from actual mouth to mouth
+with a 0.34 m by 1.76 m capsule, per-station support, 2.2 m clearance and a 15 degree grade limit;
+it also checks the orphan control, brute-force interval samples and the composed wall-foot fillet.
+The Linux58 report contains the measured reachability, surface, peer-determinism, timing and capture
+results; the code path is not promoted to legacy Maze/VerticalShafts generation.
+
+### 8.55 Unreal CoreGeometry asset bridge and U1 asset version
+
+`UVoxelStrateDefinition::CoreGeometry` is optional and defaults to recipe `None` with no stamps,
+rooms, or tunnels. The Unreal adapter preserves the established passage planner, then resolves
+authored stamps and cavern graph records, then finalizes the layout. Stable names are required and
+are scoped by strate in Core; landmarks may target a stamp, room, or tunnel by that stable name.
+Core profile heightfields are restricted to SurfaceWorld. Native caves require the TunnelNetwork or
+Underwater archetype; native lattice requires Maze or VerticalShafts. Core recipe/version fields
+enter the resolved layout identity when selected. An imported manifest cannot be mixed with a
+per-strate profiled heightfield.
+
+The checked-out Core API contains stamp vocabularies V1, V2, and V3. Unreal uses V1 for the original
+stamp kinds and V3 for monolith/platform motifs, then combines and strictly validates the result.
+Research17 names V2, but the source API and motif vocabulary require V3; source was followed.
+Research27 water remains out of scope for U1.
+
+The shared VoxelForge custom asset version is 2: version 1 records the tunnel-floor slope migration;
+version 2 adds load-time conversion for inter-strate gap, strate height, and transition width. The
+saved strate-layout width is used, currently 8 m. Old packages are converted in memory and marked
+dirty, but U1 does not save them. This does not yet migrate the rest of Research8's reflected
+spatial-property inventory: legacy chunk distances, owner/Core voxel lengths and frequencies,
+placement vectors, and other centimetre fields remain in their prior units. The U1 report records
+the five BuildHost asset values, hashes, and remaining work.
+
 ## 9. Multiplayer model (listen-server first, dedicated-friendly)
 
 > **Status: transport is DESIGN ONLY — nothing is networked in-tree yet** (no `Replicated`/`HasAuthority`/RPCs; a

CODEMAP.md

@@ -30,7 +30,7 @@ A **density-field voxel terrain** plugin for Unreal Engine, built around undergr
 | Term | Meaning |
 |------|---------|
 | Legacy chunk | 32×32×32 voxels (`CHUNK_SIZE`). At the legacy 12.5 cm voxel size it spans 4 m; it is not the strate-layout unit or the Core tile. |
-| Strate-layout chunk | World-level `StrateLayoutChunkSizeMeters`, default 8 m, shared by all generators and independent of voxel size. The director resolves it once and Core reads the resolved snapshot. At 25 cm it is 32 Core voxels; at 20 cm it is 40 Core voxels. |
+| Strate-layout chunk | World-level `StrateLayoutChunkSizeMeters`, default 8 m, shared by all generators and independent of voxel size. `UVoxelStrateManager::Initialize` resolves it to integer micrometres; slot bounds, heights, gap and transition widths use those physical values. Core derives the common `LayoutChunkWidthSubvoxels` from that same width. At 25 cm it is 32 Core voxels; at 20 cm it is 40 Core voxels. |
 | Core tile | Internal 32×32×32 Core voxel tile. Its metre size follows the Core voxel size and stays separate from the configurable layout chunk. |
 | Density | Scalar field. `< 0` solid, `> 0` air, `0` = surface (`IsoLevel`). |
 | Strate | Vertical layer of the world, stacked downward. Has its own generator + params. |
@@ -70,8 +70,10 @@ A **density-field voxel terrain** plugin for Unreal Engine, built around undergr
                                                                    (RealtimeMeshComponent)
 ```
 
-`UVoxelStrateManager` is the side oracle: "what strate is at this Z, what params,
-what generator type, and is there a passage/elevator SDF near here?"
+`UVoxelStrateManager` owns resolved half-open metre intervals (`[bottom, top)`) and is the side
+oracle: "what strate is at this Z, what params, what generator type, and is there a passage/elevator
+SDF near here?" Integer chunk bounds on each slot are compatibility projections for existing chunk
+dispatch APIs.
 
 ---
 
@@ -86,19 +88,22 @@ therefore **128 m**, and a 64-chunk strate is **512 m**. Core still stores work
 at 25 cm those tiles happen to span 8 m, but they are not the layout unit. The gameplay capsule remains
 **0.34 m radius / 1.76 m tall** (**2.72 / 14.08 legacy voxels**). Research-field dimensions are authored
 in metres and converted at runtime. The live
-strate generator continues to read voxel-valued parameters from its assets, so those authored
-dimensions become half as large in metres unless their asset values are doubled.
+strate generator continues to read voxel-valued shape parameters from its assets, so those authored
+dimensions become half as large in metres unless their asset values are doubled. U1 adds a
+versioned in-memory conversion for strate height, transition width, and inter-strate gap only; the
+broader Research8 voxel/chunk/centimetre inventory is not yet migrated.
 
 The intended metre-scale families remain: room diameters **8-20 m**, origin hub **24 m**, room cells
 **32 m**, round tunnel bores **3-4 m**, maze cells **16 m** with a **6.25 m nominal bore** (**3.125 m**
 radius; **3.0625 m** worst-case usable floor after roughness), slab open span **22.4 m**, shaft
 diameters **4-7 m**, island diameters **12-24 m**, and ordinary inter-strate bores **3-4 m**. Source
 new fixed physical dimensions are authored in metres and converted to voxel counts at the boundary.
-The owner's voxel-valued live strate assets are not migrated by C++: unchanged saved values therefore
-produce half-size rooms, tunnels, features and noise periods in metres. See the step-3 migration list
-in the handoff report for the exact `DA_Settings` fields and values.
+The owner's voxel-valued live strate shape settings are not migrated by U1: unchanged saved values
+therefore produce half-size rooms, tunnels, features and noise periods in metres. See the U1 report
+for the conversion coverage and remaining Research8 fields.
 
-**Owner asset migration (no packages were edited):** preserve `DA_Settings` distances by changing
+**Prior reauthoring recommendation (not applied in U1; no packages were edited):** preserve
+`DA_Settings` distances by changing
 `ViewDistanceXY 32→64`, `ViewDistanceUp/Down 10→20`, `PawnCollisionRadiusChunks 2→4`,
 `StrateViewMarginChunks 6→12`, `ClipRadius 6→12`, `RenderDistanceChunks 1536→3072`,
 `EdgeSealThickness 128→256 voxels`, decoration radius/near radius `12/6→24/12 chunks`, region
@@ -108,8 +113,9 @@ size `8→16 cells`, spacing/far spacing `8→16 voxels`, march step `4→8 voxe
 `12→24 cells`; it is currently disabled. Keep `MaxClipLevel=6` and zero-valued disabled/unbounded
 limits unchanged; double finite world radii and gaps, and multiply finite voxel-volume caps by 8.
 The loaded `Crystal Cave` slot in `DA_Strate3` is 64 chunks tall; use 128 chunks to preserve its
-former 512 m span. Its voxel-authored live-generator lengths remain half-size until that asset is
-re-authored; the editor-only research field is the step-3 target.
+former 512 m span. U1 automatically converts only strate height and transition widths and the
+settings gap at load; the remaining recommendations above are pending. Its voxel-authored
+live-generator lengths remain half-size until their asset fields are migrated.
 
 Step-3 six-worker scale benchmark (idle machine, `Saved/Research/step3/scale/step3_scale_cacheperf_v1`):
 the 519³ field took **7.133834–7.825292 s** across three runs (median **7.347496 s**); the 259³
@@ -167,14 +173,17 @@ remains `0`, and lateral regions remain gated off.
 | `../../Standalone/Core/src/CoreNamespacePreamble.h` | First include of every Core TU. Forces FP contraction off per compiler (Clang/MSVC/GCC pragmas; unknown compiler = `#error`) and defines `vfcore::fp_contract::selfTest`, which `World::compile` runs before building: a fused multiply-add (e.g. Clang `-ffp-contract=fast`) refuses world generation. The world depends on contraction (Linux2/Linux3 reports), so never remove either. |
 | `../../VoxelForgeCore/Private/ModuleEntry/` | Unreal module entry and an isolated `CoreMinimal.h` shim for the actual engine header. |
 | `../../Standalone/Core/include/VoxelForgeCore/VoxelForgeCore.h` | Standard-library-only public Core API. `VOXELFORGECORE_API` exports the API from the Unreal module and is empty for standalone builds. |
-| `../../Standalone/Core/include/VoxelForgeCore/VoxelForgeCore.h` / `../../Standalone/Core/src/ResolvedLayoutInternal.h` | `ResolvedLayoutSnapshotV3`: physical layout-chunk width, versioned micrometre intervals, owned ceiling/content/bedrock bands, transition and dispatch provenance, recipe anchors, director-planned passages, canonical JSON/FNV identity, compatibility/strict validators, and negative-control audit. Built once from the director-resolved plan and consumed by bounds planning, Core dispatch, composition, and validation. §8.40–8.41. |
+| `../../Standalone/Core/include/VoxelForgeCore/VoxelForgeCore.h` / `../../Standalone/Core/src/ResolvedLayoutInternal.h` | `ResolvedLayoutSnapshotV3`: physical layout-chunk width, versioned micrometre intervals, owned ceiling/content/bedrock bands, honored transition settings, deterministic per-column transition bands, recipe anchors, director-planned passages, canonical JSON/FNV identity, compatibility/strict validators, and negative-control audit. Built once from the director-resolved plan and consumed by bounds planning, Core dispatch, composition, and validation. §8.40–8.42, §8.46. |
+| `ResolvedLayoutStratePassageCapabilitiesV1::{hasNativeCaveField,hasNativeLatticeField}`, `IsNativeLatticeFieldStratum`, `HasNativeGraphField` | `Standalone/Core/include/VoxelForgeCore/VoxelForgeCore.h` / `Standalone/Core/src/ResolvedLayoutInternal.h` | Explicit per-strate native graph capability; `Core.Lattice.PrimitiveField` is restricted to Maze/VerticalShafts recipe version 1. Lattice seeds include world seed, strate, recipe version and stable feature ID; explicit polyline records keep their endpoints and receive conservative bounds. §8.54. |
+| `FCavernRuntimeFeature::FSegmentNode`, `ApplyResolvedNativeCavesField`, `ClassifyNativeCaveFieldBox` | `Standalone/Core/src/ShapeWorldInternal.h` | A deterministic nested segment BVH accelerates native graph distance and conservative interval evaluation; the outer graph BVH still supplies tile candidates and protects `isTileShapeFree`. The 0.4 m feature-union width is separate from the floor fillet width. §8.54. |
 | `../../Standalone/Core/src/FloatingIslandsInternal.h` | Canonical standalone/Core floating-island planner, geometry-versioned field, manifest serializer, influence bounds, capsule-route checks, and thickness audit. |
-| `Tools/VoxelForgeTest.ps1` | The single guarded test entry point. `-Scenario canonical|owner|probe|perf|tests|surface-fall|crossing|gate-stress|visual-edit|visual-lod|visual-gap-walk|visual-gap-inject|dig-motion|parity|horizon|horizon-render|determinism|region-eval|step2d|step2e|step2f|step2f-capture|step3-scale|step3-game`, optional `-Build`, `-Assets owner|default`, `-Cvars`, absolute `-Out`, `-Label`, `-HorizonLevel`, `-HorizonRenderDistanceChunks`, `-Step2fProfile=0..7`, `-Step2fCaptureView=inside|wall-closeup`, `-ParityExportSize=32|64|128`, `-ParityExportTile=x,y,z`, `-SharedDDC`, `-SampleDensityStacks`, `-StackSampleIntervalUs`, and `-RegionHashProbe -RegionWorkers N -RegionReferenceHash HASH`; stages the host/assets, isolates user/DDC/config state, serializes one Unreal launch at a time, enforces the 8 GiB/30-minute guards, waits for 6 GiB free RAM before launches, and emits compact `result.json`/`summary.txt` plus full logs. Parity can render its game leg with `-EnableRender` and compares the selected export region against the exact streamed tile hashes. `visual-gap-walk` records camera-frustum surface-point coverage at 6000 cm/s; `visual-gap-inject` proves an early component hide is detected; `dig-motion` logs per-frame vertical velocity, gate, support readiness, and movement mode. `-Cvars @{ 'voxel.TestGapAuditLegacyHandoff'=1 }` replays the old visibility handoff for A/B audit baselines. Horizon traces report desired/loaded tiles, resident stream geometry, worker seconds, steady wall time, and peak private memory; `horizon-render` captures the owner view; `step2f-capture` selects one of eight parameter sets, finds a positive-density camera point and aims at a sampled rock wall for an inside or wall-closeup view, then saves it under `Saved/Research/step2f/captures` (pass the persistent render DDC with `-SharedDDC`); `determinism` compares per-tile hashes across the default CRT path and `-voxel.CrtFma3=0`; `region-eval` compares the live path with the default-off editor chunk program on the 259³ lattice and five-seed probe set; `step2d` retains the earlier independent field; `step2e` retains its earlier benchmark; `step2f` compares frozen step 2e and the coherent field for all eight profiles on the same 259³ ring, applies geometry gates, and checks sound bounds, seams, and 1-vs-6-worker hashes. `-RegionHashProbe -RegionWorkers N -RegionReferenceHash HASH` checks a full-ring hash at another partition count. `-SampleDensityStacks` captures profiles, and `-StackSampleIntervalUs` sets the sampling interval.
+| `ApplyOwnerFourStratePlan` | `Source/VoxelForgeEditor/Private/VoxelForgeExploreCommandlet.cpp` | BuildHost-only transient fixed-slot plan from the four staged owner strate assets; leaves the authored settings and strate packages untouched. |
+| `Tools/VoxelForgeTest.ps1` | The single guarded test entry point. `-Scenario canonical|owner|probe|perf|tests|surface-fall|crossing|gate-stress|visual-edit|visual-lod|visual-gap-walk|visual-gap-inject|dig-motion|parity|horizon|horizon-render|determinism|region-eval|standalone-export|compile-only|step2d|step2e|step2f|step2f-capture|step3-scale|step3-game`, optional `-Build`, `-Assets owner|default`, `-Cvars`, absolute `-Out`, `-Label`, `-HorizonLevel`, `-HorizonRenderDistanceChunks`, `-Step2fProfile=0..7`, `-Step2fCaptureView=inside|wall-closeup`, `-ParityExportSize=32|64|128`, `-ParityExportTile=x,y,z`, `-SharedDDC`, `-SampleDensityStacks`, `-StackSampleIntervalUs`, and `-RegionHashProbe -RegionWorkers N -RegionReferenceHash HASH`; stages the host/assets, isolates user/DDC/config state, allows the owner's interactive editor while refusing overlapping `UnrealEditor-Cmd` launches, runs owned processes at Normal priority with a 12-logical-CPU cap, enforces the 8 GiB/30-minute guards, waits for 6 GiB free RAM before launches, and emits compact `result.json`/`summary.txt` plus full logs. Parity can render its game leg with `-EnableRender` and compares the selected export region against the exact streamed tile hashes. `visual-gap-walk` records camera-frustum surface-point coverage at 6000 cm/s; `visual-gap-inject` proves an early component hide is detected; `dig-motion` logs per-frame vertical velocity, gate, support readiness, and movement mode. `-Cvars @{ 'voxel.TestGapAuditLegacyHandoff'=1 }` replays the old visibility handoff for A/B audit baselines. Horizon traces report desired/loaded tiles, resident stream geometry, worker seconds, steady wall time, and peak private memory; `horizon-render` captures the owner view; `step2f-capture` selects one of eight parameter sets, finds a positive-density camera point and aims at a sampled rock wall for an inside or wall-closeup view, then saves it under `Saved/Research/step2f/captures` (pass the persistent render DDC with `-SharedDDC`); `determinism` compares per-tile hashes across the default CRT path and `-voxel.CrtFma3=0`; `region-eval` compares the live path with the default-off editor chunk program on the 259³ lattice and five-seed probe set; `step2d` retains the earlier independent field; `step2e` retains its earlier benchmark; `step2f` compares frozen step 2e and the coherent field for all eight profiles on the same 259³ ring, applies geometry gates, and checks sound bounds, seams, and 1-vs-6-worker hashes. `-RegionHashProbe -RegionWorkers N -RegionReferenceHash HASH` checks a full-ring hash at another partition count. `-SampleDensityStacks` captures profiles, and `-StackSampleIntervalUs` sets the sampling interval.
 | Step-3 scale and game validation | `step3-scale` measures the same 519³ and 259³ six-worker lattices at 12.5 cm. The cached medians are 7.347496 s and 1.169567 s respectively; determinism and brick sound-proof audits pass. `step3-game` routes in-game generation through the brick evaluator and records tile timings, spawn fill, moving frames, and profile-switch rebuilds. The visible D3D12 run measured tile generation p50/p95/max 3.326/31.045/169.867 ms, full-detail L0 fill 12.369 s for 2,765 tiles, and moving-frame p50/p95/p99/max 4.856/8.922/13.090/80.575 ms. Switching profiles rebuilt 5,815 loaded tiles. Both high-resolution screenshot requests were logged, but the harness found only one fresh PNG and it is a blank pale viewport; no lit comparison capture is accepted. Raw output: `Saved/TestHarness/step3_game_visible_final`; scale output: `Saved/Research/step3/scale/step3_scale_cacheperf_v1`. |
 | `Public/VoxelForgeModule.h` / `Private/VoxelForgeModule.cpp` | `FVoxelForgeModule` boilerplate (Startup/Shutdown just log). |
 | `Source/VoxelForgeEditor/VoxelForgeEditor.Build.cs` / `Private/VoxelForgeExploreCommandlet.*` | Editor/commandlet-only `-run=VoxelForgeExplore`; schema-v1 owner-asset export check and BuildHost Core actor tests. `-coreworldassembly=PATH` supplies a reviewed manifest transiently to `-coreworldtest=1`; it does not save a data asset. `FStandaloneCoreAdapterScheduler` runs Core work at 1/8/16 workers; `VerifyStandaloneCoreAdapter` checks hashes and walkability. Existing bounded render/`VF_` walk/OBJ orchestration and research options remain editor/commandlet-only and are not linked by Game/Shipping. |
 | `Source/VoxelForge/Public/VoxelSettings.h` / `Private/VoxelSettings.cpp` | `UVoxelSettings` owns optional canonical world-assembly JSON and its Core digest. The editor file picker plus `ImportWorldAssemblyManifestJson` imports the reviewed manifest into the cooked settings asset and validates the recipe seed against the effective settings seed. |
-| `Source/VoxelForge/Private/VoxelForgeCoreAdapter.cpp` | Validates the optional manifest against each resolved `SurfaceWorld` slot (unique strate index and exact top/bottom chunks), then exports canonical `resolved_layout` separately from `world_assembly` and its hash. The layout digest does not alter recipe hashes. Invalid plans fail Core initialization. |
+| `Source/VoxelForge/Private/VoxelForgeCoreAdapter.cpp` | Resolves Core's common `LayoutChunkWidthSubvoxels` from the manager's physical layout width; builds SurfaceWorld/FloatingIslands bounds, L29 bands and passage settings from resolved micrometre slot fields; keeps owner/Core ratios in the legacy FloatingIslands parameter adapter. Chunk fields validate imported plans as compatibility projections. Exports canonical `resolved_layout` separately from `world_assembly` and its hash. Invalid plans fail Core initialization. |
 | `Source/VoxelForgeEditor/Private/VoxelForgeRegionEvalExperiment.*` | Six-worker lattice drivers for step 2c through step 2f. The original path still compares live `GetDensityAt` with the editor chunk program. Research modes assign contiguous batches dynamically so surface-heavy work balances across workers; steps 2e and 2f use 4³ proof bricks and stage each evaluated brick before copying contiguous X rows, while step 2d retains 8³. Each skip requires a macro Lipschitz bound plus the complete final-detail supremum; uncertain bricks retain every 12.5 cm detail sample. Timings split classification, point evaluation, and uniform fill; step 2f compares all profiles and hashes workers 1 and 6. |
 | `Public/VoxelRedefinedDensityField.h` / `Private/VoxelRedefinedDensityField.cpp` | Two default-off `WITH_EDITOR` research fields, selected by `voxel.ResearchRedefinedDensityField` (step 2d) and `voxel.ResearchParameterizedCave` (steps 2e/2f). Step 2f retains a metre-scaled 2e baseline for its rejection audit. New profiles use strongly jittered, individually rotated elliptical rooms capped against nearest neighbors and curved cubic-Bezier passages with deterministic centerline and width variation along each edge. Room heights and feature rolls vary by cell; ledges, occasional pillars, stalactites/stalagmites, basin floors, and bounded hanging masses remain features. Point and brick detail sampling share independently rotated 96/48/24-sample bands and a smooth ridge response, preserving 12/6/3 m wavelengths at 12.5 cm per sample. The parameterized mesher evaluates the exact field through prepared 4³ bricks and the same sound skip proof in commandlet and editor-game meshing. In-editor and in-game profile changes invalidate and rebuild all loaded tiles. In an editor game with this field enabled, sealed-solid, out-of-layout, and outer-classifier verdicts are declined without changing their console switches. |
 | `Private/Tests/VoxelForgeParameterizedGenerationTest.cpp` | Separate three-seed functional sweep for the step 2f parameterized field; passage landing air/floor brackets and arrival-to-exit walking routes are checked without changing the live-world tests. |
@@ -598,13 +607,16 @@ content lists, audio, `GameplayTags`(393). EditConditions show/hide param groups
 type.
 
 **`Public/VoxelStrateManager.h` + `.cpp`** — `UVoxelStrateManager : UObject` (h:152).
-Maps depth→strate at runtime; owns passages.
+Resolves each slot's physical metre interval, layout gap, transition width, world seed and passage
+settings during `Initialize`, then owns passages. World-Z APIs query the physical intervals; legacy
+chunk APIs use the cached integer projection.
 - `FVoxelPassage` (h:46): standing endpoints, radius, type, wandering control points, and
   upper/lower local landing descriptors (room, floor, and door; no root connector).
-- `FStrateSlot` (h:128): definition + chunk-Z range + index.
+- `FStrateSlot` (h:128): content definition, resolved micrometre bounds/height, resolved transition
+  and passage inputs, and compatibility chunk-Z projection + strate index.
 | Method | .cpp line | Role |
 |--------|-----------|------|
-| `Initialize` | 1164 | Keeps the existing sequencing through `GeneratePassages`, but selects one slot source: a validated cooked season (exact ordered bounds/vector/recipe) or the unchanged authored fixed+sorted/shuffled pool. Assigned-invalid seasons fail closed. Authored source definitions are duplicated as content bags; generated slots use deterministic C++ defaults and zero auto-passages because schema 2 does not store passage configuration. |
+| `Initialize` | 1186 | Keeps the existing sequencing through `GeneratePassages`, but selects one slot source: a validated cooked season (exact ordered bounds/vector/recipe) or the unchanged authored fixed+sorted/shuffled pool. Assigned-invalid seasons fail closed. Authored source definitions are duplicated as content bags; generated slots use deterministic C++ defaults and zero auto-passages because schema 2 does not store passage configuration. |
 | `GeneratePassages` | 1659 | Deterministic passages between consecutive strates (per-strate `PassageConfig::Style` control points; auto passages retain the existing `EVoxelPassageType` default); placement and shape values are independently salted hashes of seed + boundary slot + connection index. Each mouth independently queries its own strate's pure player-fit `VF_SuggestLandingPoint` with its contract seed (cave room salt, otherwise world seed), may move within its archetype-specific budget, then receives a body-sized local room/floor. The origin landing is reserved for the future shaft; no landing-to-root road is generated. Unsupported/no-fit answers preserve the old random reach; a deterministic level dog-leg is inserted when the final ramp needs it to stay ≤44°. All descriptors and bounds are generated without reading another passage. |
 | `EvaluateModifierSDF` | 2643 | SDF of passage tubes plus local landing rooms at a point. A per-chunk `thread_local` shortlist (`PassagesVersion`-stamped) → far chunks return `FLT_MAX` without walking `Passages`; the same cache serves floor membership. `FPassageEvaluationCache::FloorProjections` reuses native/generic floor projections and walkable-air results once per `(sample, passage)` using exact double XYZ equality and unchanged float outputs; `voxel.FloorRound1PassageProjectionCache=0` disables only this A/B cache. §8.10. |
 | `ApplyPassageModifier` | 2772 | Shared legacy/op-stack passage post: carves tube and local landing air through the idempotent landing primitive, then restores the local landing support slab in internal positive-solid density. |
@@ -612,18 +624,18 @@ Maps depth→strate at runtime; owns passages.
 | `ApplyPassageLandingFloorMC` | 2983 | Reasserts the same support slab after MC-space disturbances and before the final XY edge seal. |
 | `AnyPassageNearBox` | — | Conservative sphere-vs-AABB test of every passage's bound against a voxel box (+carve blend pad). Per TILE (ClassifyTile guard), never per voxel. |
 | `AnyPassageLandingFloorNearBox` | — | Conservative local-landing-floor AABB guard. It kills the `AllAir` hypothesis wherever a proved landing floor can occur; the op-stack returns `Both` for the same box. |
-| `FindSlotIndexForChunkZ` | 6111 | Z → layout index. |
-| `GetStrateAt` / `GetStrateIndex` | 6127 / 6139 | World-Z queries. |
+| `FindSlotIndexForChunkZ` / `FindSlotIndexForWorldZCentimetres` | 6239 / 6251 | Chunk callers use the cached compatibility projection; world-Z callers search physical half-open micrometre intervals. |
+| `GetStrateAt` / `GetStrateIndex` | 6276 / 6287 | World-Z queries against half-open micrometre intervals. |
 | `GetLayoutVersion` | h:250 (inline) | Layout/passage generation counter (= `PassagesVersion`, bumped by every `Initialize` and by the editor composer override). Hot-path callers key `thread_local` memos on it (strate-index memo in `GetDensityWithParams`, passage shortlist) so live changes never serve stale data. |
-| `GetStrateForChunk` | 6150 | Chunk → definition. |
-| `GetGeneratorTypeForChunk` | 6176 | Chunk → generator type. |
-| `UsesOperatorStackForChunk` | 6203 | Chunk → does its slot have an operator stack? True for any in-layout slot with a definition whose archetype is one of the 8 (Maze, FlatPlain, CrystalChamber, SurfaceWorld, VerticalShafts, FloatingIslands, TunnelNetwork, Underwater); false outside the layout. **That list is written down here and nowhere else.** `ClassifyTile` guards on it; `GetDensityAt` uses it to share TunnelNetwork stacks by chunk Z. |
+| `GetStrateForChunk` | 6298 | Chunk → definition via the compatibility projection. |
+| `GetGeneratorTypeForChunk` | 6324 | Chunk → generator type via the compatibility projection. |
+| `UsesOperatorStackForChunk` | 6351 | Chunk → does its slot have an operator stack? True for any in-layout slot with a definition whose archetype is one of the 8 (Maze, FlatPlain, CrystalChamber, SurfaceWorld, VerticalShafts, FloatingIslands, TunnelNetwork, Underwater); false outside the layout. **That list is written down here and nowhere else.** `ClassifyTile` guards on it; `GetDensityAt` uses it to share TunnelNetwork stacks by chunk Z. |
 | `GetRecipeForChunk` | — | Runtime immutable recipe/vector/strate-seed copy for cooked seasons; editor slot overrides use the same worker hand-off. |
-| `GetSlabParamsForChunk` | 6263 | Slab params with runtime Z bounds (no blend — slabs use Hard). |
+| `GetSlabParamsForChunk` | 6415 | Slab params with runtime Z bounds (no blend — slabs use Hard). |
 | `GetBiomeContextForChunk` | — | Flatten the strate's `Biomes[]` + `BiomeMapParams` into a POD `FBiomeContext` for the biome field. Empty ⇒ biomes disabled. §8.14. |
-| `GetGenerationParams` | 6509 | **Blended** TunnelNetwork params (handles Gradient/Hard/Interleaved transitions). |
+| `GetGenerationParams` | 6661 | **Blended** TunnelNetwork params (handles Gradient/Hard/Interleaved transitions). |
 | `SetComposerOverrideForStrate` / `GetComposerOverrideForChunk` | editor-only | Temporary density-only candidate overlay for one existing slot. Copies immutable params/recipe into the worker refetch path, leaves layout/content/passages intact, and bumps `PassagesVersion` to invalidate generator memos. |
-| `BuildParamsFromDefinition` (static) | 6815 | Returns the definition's base `GenerationParams` only. Terrain-op assets are passed separately to `BuildChunkCache`, which applies one selected op per room and pre-bakes Column/Pit/Chimney features. |
+| `BuildParamsFromDefinition` (static) | 6985 | Returns the definition's base `GenerationParams` only. Terrain-op assets are passed separately to `BuildChunkCache`, which applies one selected op per room and pre-bakes Column/Pit/Chimney features. |
 
 **`Public/VoxelTerrainOpDefinition.h` + `.cpp`** — `UVoxelTerrainOpDefinition : UPrimaryDataAsset`
 (h:67). One asset = one terrain op. `EVoxelTerrainOpType` (h:36): Terrace, LayerLines,
@@ -1160,7 +1172,7 @@ and [`Standalone/Research/WorldAssemblerM3/Linux18/REPORT.md`](Standalone/Resear
 | Symbol | Canonical file | Role |
 |---|---|---|
 | `PlanResolvedLayoutPassagesV1`, `ResolvedLayoutPassageV1::lowerMouthControlIndex` | `Standalone/Core/src/ResolvedLayoutInternal.h`, public record in `VoxelForgeCore.h` | Plans deterministic fixed-metre passages from adjacent director-resolved strata, binds route departure/arrival mouths, and records the derived split between the monotone descent and route-bound landing tail. |
-| `FStandaloneShapeWorld::ApplyResolvedStrateComposition`, `ApplyResolvedStratePassageCarves` | `Standalone/Core/src/ShapeWorldInternal.h` | Applies boundary bands first, then opens the passage capsule and supported floor along the passage for every native generator. |
+| `FStandaloneShapeWorld::ApplyResolvedStrateComposition`, `ApplyResolvedStratePassageCarves` | `Standalone/Core/src/ShapeWorldInternal.h` | Applies resolved boundary bands first, then opens the passage capsule and supported floor along the passage for every native generator. |
 | `--audit-resolved-layout-passages` | `Standalone/Source/StreamBenchmarkPipeline.h` | Samples passage capsules, floor support, mouth ownership/radius, in-strate route bindings, and a blocked-passage negative control. |
 
 The evaluator version is 9. See ARCHITECTURE §8.41 and
@@ -1217,6 +1229,129 @@ schema V3 is unchanged. See ARCHITECTURE §8.44 and
 See ARCHITECTURE §8.45 and
 [Linux28 report](Standalone/Research/WorldAssemblerM3/Linux28/REPORT.md).
 
+### 3.29 Honored bedrock/ceiling transitions — World Assembler L29
+
+| Symbol | Canonical file | Role |
+|---|---|---|
+| `EvaluateResolvedLayoutTransitionBandsV1`, `AuditResolvedStrateTransitions` | Public Core header / `Standalone/Core/src/ResolvedLayoutInternal.h`; `Standalone/Source/StreamBenchmarkPipeline.h` | Resolve the deterministic mode field from seed, interface and coordinates; audit actual crossing depth, minimum band thickness, passage-excluded holes, and strict negative controls. |
+| `FStandaloneShapeWorld::ApplyResolvedStrateBoundaryBand` | `Standalone/Core/src/ShapeWorldInternal.h` | Applies Hard, Gradient or Interleaved to both facing bands in the shared Core composition path; tapers locally at passage mouths to preserve landing support. |
+
+The shared evaluator is version 15. Recipe and resolved-layout schema versions are unchanged.
+The Unreal adapter now forwards the authored transition type and chunk width; those Unreal edits
+were not compiled here. See ARCHITECTURE §8.46 and
+[`Standalone/Research/WorldAssemblerM3/Linux29/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux29/REPORT.md).
+
+### 3.30 SurfaceWorld as an upper strate and floor-profile joins — World Assembler L33
+
+| Symbol | Canonical file | Role |
+|---|---|---|
+| `BuildFiniteStrateRoute` | `Standalone/Source/WorldAssemblyPrototype.h` | Samples route heights from the composed terrain ground; bounds candidate chords by the arrival/departure placement radii and records per-segment grade failures. |
+| `PlanResolvedLayoutPassagesV1` | `Standalone/Core/src/ResolvedLayoutInternal.h` | Starts an upper-SurfaceWorld departure at its terrain mouth, opens a small portal and smoothsteps to the rock tunnel while orienting the ring outward. |
+| `BuildPassageVoidCrossingPlan`, `PassageBridgeSignedDistance` | `Standalone/Core/src/ShapeWorldInternal.h` | Sizes unsupported ranges from the full control-segment window only for upper SurfaceWorld; other upper generators keep the previous bracketing-sample bounds. |
+| `--audit-resolved-layout-passages` | `Standalone/Source/StreamBenchmarkPipeline.h` | Uses floor height rather than bore-centre height for naturalness and records failed-only wall probes for column audits. |
+| `FloorProfileBlend` | `Standalone/Core/src/ShapeWorldInternal.h` | Measures endpoint height/tangent continuity; chord deviation is informational, with step and tangent-step negative controls. |
+
+The owner SurfaceWorld hashes match L32 and evaluator/recipe versions are unchanged. See
+ARCHITECTURE §8.47 and
+[`Standalone/Research/WorldAssemblerM3/Linux33/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux33/REPORT.md).
+
+### 3.31 Passage-wall ripple and FI tread-shoulder audit — World Assembler M3 L35
+
+| Symbol | Canonical file | Role |
+|---|---|---|
+| `VF_FieldPassageWallRelief` | `Standalone/Core/src/VoxelForgeFieldShared.h` | Supplies passage-only irregular wall relief at rotated 43/29/19 m scales. Other `VF_FieldSurfaceRelief` users stay unchanged. |
+| `ApplyResolvedStratePassageCarves` | `Standalone/Core/src/ShapeWorldInternal.h` | Catmull–Rom smooths eligible interior sweep joins, applies passage-only wall relief, and tapers/grains the entry support shoulder below the capsule/support probe footprint. |
+| `PlanResolvedLayoutPassagesV1` | `Standalone/Core/src/ResolvedLayoutInternal.h` | Gives each Cascade turn a seeded shallow radial profile instead of identical repeated full-depth cosine lobes. |
+| `auditPassageRipples` / `PassageRippleAudit` | `Standalone/Source/StreamBenchmarkPipeline.h` | Samples wall radii and walk-floor zero crossings at 0.125 m spacing, scans periods 0.5–8 m in 32 m windows, and rejects wall/floor amplitudes ≥0.035/0.015 m. Sphere and beaded-floor controls must be detected. |
+
+`WorldAssemblyEvaluatorVersion=21`. See ARCHITECTURE §8.48 and
+[`Standalone/Research/WorldAssemblerM3/Linux35/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux35/REPORT.md).
+
+### 3.32 Walk-floor washboard and FI mouth blend — World Assembler M3 L36
+
+| Symbol | Canonical file | Role |
+|---|---|---|
+| `ApplyResolvedStratePassageCarves` | `Standalone/Core/src/ShapeWorldInternal.h` | Extends eligible tread sections by up to 2 m and uses bounded signed-distance support on every sparse route, including SurfaceWorld-to-TunnelNetwork, removes seeded shoulder grain, and seats regular tread tops 5 cm lower with a smooth return at the lower landing. Capsule/open-air gates remain. Gravity-facing wall relief is reduced; side and ceiling relief remain. |
+| `ApplyResolvedStratePassageCarves` mouth support | `Standalone/Core/src/ShapeWorldInternal.h` | Builds exact signed-distance route-mouth tread boxes and smooth-unions them with native terrain over 1.5 m. |
+| `NativeFloatingIslandDensityAt` | `Standalone/Core/src/ShapeWorldInternal.h` | Applies a local 2 m symmetric signed-field filter around FI passage mouths, exempts resolved route support, and removes isolated negative samples thinner than 2 m on all axes. |
+| `auditPassageRipples` / `PassageRippleAudit` | `Standalone/Source/StreamBenchmarkPipeline.h` | Keeps the wall-radius audit and adds walk-floor zero-crossing profiles at 0.125 m, with five 32 m windows and a 0.015 m limit plus a beaded-floor negative control. |
+| `RunMouthFragmentAuditL36.py`, `ProbeWalkFloorProfileL36.py` | `Standalone/Research/WorldAssemblerM3/Linux36/` | Compare L35 floor and FI-mouth controls with L36; the mouth check fails on detached components at or above 0.0001 m² and checks normal jumps across the fade ring. |
+
+`WorldAssemblyEvaluatorVersion=23`. See ARCHITECTURE §8.49 and
+[`Standalone/Research/WorldAssemblerM3/Linux36/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux36/REPORT.md).
+
+### 3.33 Immutable field binding — World Assembler M3 L40
+
+| Symbol | Canonical file | Role |
+|---|---|---|
+| `FSurfaceWorldFieldAdapter`, `FFloatingIslandFieldAdapter`, `FLegacyGeneratorFieldAdapter`, `FGeneratorFieldAdapterV1` | `Standalone/Core/src/ShapeWorldInternal.h` | Concrete, immutable density adapters with one shared `densityAt(x,y,z,out)` call shape; the variant avoids per-sample virtual dispatch. FI retains its fixed-point entry point and prebound legacy boundary parameters. |
+| `FBoundStratumField`, `BindResolvedStratumFields`, `FindBoundStratumForChunk` | `Standalone/Core/src/ShapeWorldInternal.h` | Bind a resolved strate's plan, evaluator and chunk interval once during world initialization; native field and classification queries select this table. |
+| `NativeSurfaceDensityAt`, `NativeFloatingIslandDensityAt`, `ClassifyBoxDetailed` | `Standalone/Core/src/ShapeWorldInternal.h` | Consume the prebound adapters and plan pointers instead of looking up strate type/parameters through the manager per query. |
+
+Hash parity is unchanged from L37/L39; see ARCHITECTURE §8.50 and
+[`Standalone/Research/WorldAssemblerM3/Linux40/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux40/REPORT.md).
+
+### 3.34 Resolved boundary and landing capabilities — World Assembler M3 L42
+
+| Symbol | Canonical file | Role |
+|---|---|---|
+| `ResolvedLayoutStratePassageCapabilitiesV1`, `ResolvedLayoutInterfaceCapabilitiesV1` | `Standalone/Core/include/VoxelForgeCore/VoxelForgeCore.h` | Runtime-only resolved records for surface/island landing, passage-column anchoring, the FI Gradient air gap, and SW-to-TunnelNetwork support. They are derived during layout finalization from fields already included in the canonical layout identity. |
+| `ResolvedLayoutSnapshotV3::finalize` | `Standalone/Core/src/ResolvedLayoutInternal.h` | Resolves those capabilities once before sampling; canonical JSON and stable layout IDs stay unchanged. |
+| `FStandaloneShapeWorld::ApplyResolvedStrateBoundaryBand`, `ApplyResolvedStratePassageCarves`, `BuildPassageVoidCrossingPlan`, `PassageBridgeSignedDistance` | `Standalone/Core/src/ShapeWorldInternal.h` | Consume resolved capability records. Generator-kind selection remains only in `BindResolvedStratumFields`, where it binds the concrete evaluator once. |
+
+Owner hashes match L41; see ARCHITECTURE §8.52 and
+[`Standalone/Research/WorldAssemblerM3/Linux42/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux42/REPORT.md).
+
+### 3.35 Core landmark SDF stamps — World Assembler M3 L43
+
+| Symbol | Canonical file | Role |
+|---|---|---|
+| `ResolvedLayoutStampRequestV1`, `ResolvedLayoutStampV1`, `ResolvedSdfStampKindV1` | `Standalone/Core/include/VoxelForgeCore/VoxelForgeCore.h` | Version-1 bounded stamp vocabulary and integer-micrometre request/resolved records shared by all Core generators. |
+| `ResolveResolvedLayoutStampsV1`, `AuditResolvedLayoutStampPlacementV1` | `Standalone/Core/src/ResolvedLayoutInternal.h` | Seed/strate/stable-ID placement with bounded retries; rejects passage-mouth, walk-corridor, content-face, ceiling and bedrock conflicts. Empty requests preserve the old canonical layout payload. |
+| `BuildStampSpatialIndex`, `ApplyResolvedSdfStamps`, `StampSdf` | `Standalone/Core/src/ShapeWorldInternal.h` | BVH-built conservative bounds select stamps once per tile; shared density composition applies smooth carve/fill SDFs with seeded value-noise relief. Box classification and native-only readiness decline boxes touched by a stamp. |
+| `--landmark-chamber-demo` | `Standalone/Source/StreamBenchmarkHeadless.cpp` | Opt-in owner-world recipe: one SW ellipsoid chamber, arched entrance and low fill dais, placed beside the passage arrival. Off by default. |
+
+See ARCHITECTURE §8.53 and
+[`Standalone/Research/WorldAssemblerM3/Linux43/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux43/REPORT.md)
+for layout identities, owner hashes, outside-box timing, audits and captures.
+
+### 3.36 Native lattice field — World Assembler M3 R26 slice 1 (Linux L58)
+
+| Symbol | Canonical file | Role |
+|---|---|---|
+| `IsNativeLatticeFieldStratum`, `LayoutLatticeFeatureSeed`, `ResolvedCavernRoomV1::unionWidthMicrometres`, `ResolvedCavernEdgeV1::unionWidthMicrometres` | `Standalone/Core/include/VoxelForgeCore/VoxelForgeCore.h`, `Standalone/Core/src/ResolvedLayoutInternal.h` | Versioned Maze/VerticalShafts opt-in and deterministic seed from `(seed, strate, recipe version, stable ID)`; optional union width preserves prior cave JSON when unset. |
+| `MakeNativeLatticeSpine`, `--recipe=lattice`, `--lattice-strate=N` | `Standalone/Source/StreamBenchmarkHeadless.cpp` | Resolves actual adjacent mouths, builds a mandatory four-turn helix and maze spine, then adds two seeded dead ends; `--lattice-orphan-control` moves the helix away from both junctions. |
+| `AuditNativeLatticeField` | `Standalone/Source/StreamBenchmarkPipeline.h` | Samples the final field along the mouth-to-mouth capsule route, checking support, headroom, grade, orphan rejection, composed fillet, interval signs and feature-tile exclusion. |
+| `BuildLatticeFixtureL58.py`, `CaptureNativeLatticeL58.py`, `AuditLatticeSurfaceL58.py` | `Standalone/Research/WorldAssemblerM3/Linux58/` | Isolated Maze strate fixture, four reviewed captures and the L54 whole-surface triangle audit adapted to explicit native polylines. |
+
+See ARCHITECTURE §8.54 and
+[`Standalone/Research/WorldAssemblerM3/Linux58/REPORT.md`](Standalone/Research/WorldAssemblerM3/Linux58/REPORT.md)
+for resolved records, final-field reachability, controls, timing, hashes and captures.
+
+### 3.37 Unreal CoreGeometry assets and partial metre upgrade — World Assembler U1
+
+`Public/VoxelStrateTypes.h` declares optional `FVoxelForgeCoreGeometry`. Its default recipe is Off
+and its stamp, room, and tunnel arrays are empty. `Private/VoxelForgeCoreAdapter.cpp` maps authored
+metres to Core layout requests after passage planning and before finalizing the layout. Stamps use
+the V1 resolver for original stamp kinds and V3 for monolith/platform motifs because the checked-out
+Core API exposes V3; authored cavern records use `ResolveResolvedCavernGraphV1`. Stable feature
+names are namespaced by strate in the resolved layout. `FStrateLandmark::CoreGeometryStableName`
+binds one landmark to such a resolved record, and `VoxelContentManager.cpp` builds its lookup from
+the finalized snapshot. `VoxelWorld.cpp` retains resolved layout identity in content hashing.
+
+`Private/VoxelForgeAssetVersion.h` sets the shared custom version to 2. `UVoxelSettings::Serialize`
+and `UVoxelStrateDefinition::Serialize`/`PostLoad` upgrade only inter-strate gap, strate height,
+and transition width using the saved 8 m layout chunk. These conversions are version-guarded and
+idempotent. No package save is performed by the audit. Other Research8 chunks, owner-voxel lengths,
+Core-voxel lengths/frequencies, and centimetre fields remain on their existing units and need a
+separate migration.
+
+Likely compile/UHT touchpoints are the reflected nested fields in `VoxelStrateTypes.h`, Core snapshot
+and resolver signatures in `VoxelForgeCoreAdapter.cpp`, `FCustomVersionRegistration` and the old
+tunnel-slope version in `VoxelStrateDefinition.cpp`, plus the standalone `VoxelForgeExplore` audit
+in `VoxelForgeExploreCommandlet.cpp`. `GetStrateForChunk` still receives layout-chunk Z, not a Core
+tile index. See `Standalone/Research/WorldAssemblerM3/Unreal1/REPORT.md` for BuildHost evidence.
+
 ## 4. The density pipeline (most-edited hot path)
 
 ### 4.1 `GetDensityWithParams` (TunnelNetwork) — VoxelGenerator.cpp:3749

Source/VoxelForge/Private/Tests/VoxelForgeComposerSeasonTest.cpp

@@ -399,6 +399,7 @@ bool FVoxelForgeComposerSeasonTest::RunTest(const FString& Parameters)
     LegacySettings->WorldRadiusVoxels = 987.0f;
     LegacySettings->TotalStrates = 1;
     LegacyDefinition->StrateHeightInChunks = 7;
+    LegacyDefinition->StrateHeightMeters = 7.0 * 8.0;
     LegacySettings->StratePool.Add(
         TSoftObjectPtr<UVoxelStrateDefinition>(LegacyDefinition.Get()));
     TStrongObjectPtr<UVoxelStrateManager> LegacyManager(

Source/VoxelForge/Private/Tests/VoxelForgeCorrectnessRoundTest.cpp

@@ -525,6 +525,7 @@ bool FVoxelForgeZeroTransitionBlendTest::RunTest(const FString& Parameters)
     {
         UVoxelStrateDefinition* Definition = World.Definitions[Index].Get();
         Definition->TransitionBlendChunks = 0;
+        Definition->TransitionWidthMeters = 0.0;
         Definition->TransitionType = (Index & 1) == 0
             ? EVoxelStrateTransition::Gradient : EVoxelStrateTransition::Interleaved;
     }

Source/VoxelForge/Private/Tests/VoxelForgeLayoutOrderIndependenceTest.cpp

@@ -44,6 +44,7 @@ namespace
             Settings->Seed = LayoutSeed;
             Settings->TotalStrates = NumPoolDefinitions;
             Settings->InterStrateGapChunks = 1;
+            Settings->InterStrateGapMeters = Settings->StrateLayoutChunkSizeMeters;
             Settings->bOpenSurfaceEntry = true;
 
             static const ECaveGeneratorType GeneratorTypes[] = {
@@ -69,6 +70,8 @@ namespace
                     FString::Printf(TEXT("Layout order test strate %d"), Index));
                 Def->GeneratorType = GeneratorTypes[Index];
                 Def->StrateHeightInChunks = 3 + Index;
+                Def->StrateHeightMeters = static_cast<double>(Def->StrateHeightInChunks)
+                    * Settings->StrateLayoutChunkSizeMeters;
                 Def->TransitionType = EVoxelStrateTransition::Hard;
 
                 // Non-trivial, distinct passage configs exercise the connection index and the

Source/VoxelForge/Private/Tests/VoxelForgeTestFixture.h

@@ -79,6 +79,8 @@ namespace VoxelForgeTest
                 NewObject<UVoxelSettings>(GetTransientPackage(), NAME_None, RF_Transient));
             Settings->Seed = InSeed;
             Settings->InterStrateGapChunks = InGapChunks;
+            Settings->InterStrateGapMeters = static_cast<double>(InGapChunks)
+                * Settings->StrateLayoutChunkSizeMeters;
             // WorldRadiusVoxels/EdgeSealThickness intentionally inherit the UVoxelSettings defaults;
             // WorldEdgeSeal overrides them explicitly when it needs a small test world or radius 0.
 
@@ -110,6 +112,8 @@ namespace VoxelForgeTest
                 // refinement and roll tests use the smaller synthetic volume as a bounded memory
                 // control; the owner-facing showcase opts into 8 chunks below.
                 Def->StrateHeightInChunks = FMath::Max(1, InStrateHeightInChunks);
+                Def->StrateHeightMeters = static_cast<double>(Def->StrateHeightInChunks)
+                    * Settings->StrateLayoutChunkSizeMeters;
                 // Hard transitions: param blending across a boundary would make "which archetype
                 // owns this chunk" ambiguous, and these tests want an unambiguous mapping.
                 Def->TransitionType = EVoxelStrateTransition::Hard;

Source/VoxelForge/Private/VoxelClipmapDesiredTiles.h

@@ -4,6 +4,27 @@
 
 namespace VoxelClipmapDesiredTiles
 {
+    FORCEINLINE int64 FloorDivWide(int64 Value, int64 Divisor)
+    {
+        if (Divisor <= 0) { return 0; }
+        const int64 Quotient = Value / Divisor;
+        const int64 Remainder = Value % Divisor;
+        return Remainder < 0 ? Quotient - 1 : Quotient;
+    }
+
+    FORCEINLINE int64 CeilDivWide(int64 Value, int64 Divisor)
+    {
+        if (Divisor <= 0) { return 0; }
+        const int64 Quotient = Value / Divisor;
+        const int64 Remainder = Value % Divisor;
+        return Remainder > 0 ? Quotient + 1 : Quotient;
+    }
+
+    FORCEINLINE int32 ClampInt32(int64 Value)
+    {
+        return static_cast<int32>(FMath::Clamp<int64>(Value, MIN_int32, MAX_int32));
+    }
+
     struct FParameters
     {
         int32 ClipRadius = 3;
@@ -13,7 +34,10 @@ namespace VoxelClipmapDesiredTiles
 
     FORCEINLINE int32 FloorDiv(int32 Value, int32 Divisor)
     {
-        return Value >= 0 ? (Value / Divisor) : -(((-Value) + Divisor - 1) / Divisor);
+        if (Divisor <= 0) { return 0; }
+        const int32 Quotient = Value / Divisor;
+        const int32 Remainder = Value % Divisor;
+        return Remainder < 0 ? Quotient - 1 : Quotient;
     }
 
     FORCEINLINE FIntVector FloorDiv(const FIntVector& Value, int32 Divisor)
@@ -24,7 +48,10 @@ namespace VoxelClipmapDesiredTiles
 
     FORCEINLINE int32 CeilDiv(int32 Value, int32 Divisor)
     {
-        return -FloorDiv(-Value, Divisor);
+        if (Divisor <= 0) { return 0; }
+        const int32 Quotient = Value / Divisor;
+        const int32 Remainder = Value % Divisor;
+        return Remainder > 0 ? Quotient + 1 : Quotient;
     }
 
     FORCEINLINE void AlignedRingBounds(const FIntVector& Center, int32 Radius, int32 Alignment,
@@ -33,10 +60,12 @@ namespace VoxelClipmapDesiredTiles
         const auto AlignAxis = [Radius, Alignment](int32 CenterAxis,
                                                   int32& OutAxisMin, int32& OutAxisMax)
         {
-            const int32 BaseMin = CenterAxis - Radius;
-            const int32 BaseEnd = CenterAxis + Radius + 1;
-            OutAxisMin = FloorDiv(BaseMin, Alignment) * Alignment;
-            OutAxisMax = CeilDiv(BaseEnd, Alignment) * Alignment - 1;
+            const int64 SafeRadius = FMath::Max<int64>(0, Radius);
+            const int64 SafeAlignment = FMath::Max<int64>(1, Alignment);
+            const int64 BaseMin = static_cast<int64>(CenterAxis) - SafeRadius;
+            const int64 BaseEnd = static_cast<int64>(CenterAxis) + SafeRadius + 1;
+            OutAxisMin = ClampInt32(FloorDivWide(BaseMin, SafeAlignment) * SafeAlignment);
+            OutAxisMax = ClampInt32(CeilDivWide(BaseEnd, SafeAlignment) * SafeAlignment - 1);
         };
         AlignAxis(Center.X, OutMin.X, OutMax.X);
         AlignAxis(Center.Y, OutMin.Y, OutMax.Y);
@@ -49,8 +78,13 @@ namespace VoxelClipmapDesiredTiles
         {
             return Radius;
         }
-        return FMath::Max(Radius,
-            (Parameters.RenderDistanceChunks + (1 << MaxLevel) - 1) >> MaxLevel);
+        const int32 SafeLevel = FMath::Clamp(MaxLevel, 0, 8);
+        const int64 Scale = int64{1} << static_cast<uint32>(SafeLevel);
+        const int64 Numerator = static_cast<int64>(Parameters.RenderDistanceChunks)
+            + Scale - 1;
+        const int64 DesiredRadius = Numerator / Scale;
+        return static_cast<int32>(FMath::Clamp<int64>(
+            FMath::Max<int64>(Radius, DesiredRadius), 0, MAX_int32));
     }
 
     FORCEINLINE void OuterShell(const FParameters& Parameters, int32 Radius, int32 MaxLevel,
@@ -73,12 +107,12 @@ namespace VoxelClipmapDesiredTiles
             return;
         }
 
-        OutMinChunkZ = CenterChunkZ - ViewDistanceDown;
-        OutMaxChunkZ = CenterChunkZ + ViewDistanceUp;
+        OutMinChunkZ = ClampInt32(static_cast<int64>(CenterChunkZ) - ViewDistanceDown);
+        OutMaxChunkZ = ClampInt32(static_cast<int64>(CenterChunkZ) + ViewDistanceUp);
         if (bHasStrate)
         {
-            OutMinChunkZ = StrateBottomChunkZ - StrateViewMarginChunks;
-            OutMaxChunkZ = StrateTopChunkZ + StrateViewMarginChunks;
+            OutMinChunkZ = ClampInt32(static_cast<int64>(StrateBottomChunkZ) - StrateViewMarginChunks);
+            OutMaxChunkZ = ClampInt32(static_cast<int64>(StrateTopChunkZ) + StrateViewMarginChunks);
         }
     }
 
@@ -94,7 +128,7 @@ namespace VoxelClipmapDesiredTiles
 
         for (int32 Level = 0; Level <= MaxLevel; ++Level)
         {
-            const int32 Pow = 1 << Level;
+            const int32 Pow = static_cast<int32>(uint32{1} << static_cast<uint32>(Level));
             const FIntVector CenterLevel = FloorDiv(Center, Pow);
             const int32 LevelRadius = (Level == MaxLevel) ? OuterRadius : Radius;
 
@@ -105,24 +139,23 @@ namespace VoxelClipmapDesiredTiles
             FIntVector RingMin, RingMax;
             AlignedRingBounds(CenterLevel, LevelRadius, RingAlignment, RingMin, RingMax);
 
-            int32 DeltaZMin = RingMin.Z - CenterLevel.Z;
-            int32 DeltaZMax = RingMax.Z - CenterLevel.Z;
+            int64 TileMinZ = RingMin.Z;
+            int64 TileMaxZ = RingMax.Z;
             if (LevelRadius > Radius && MinChunkZ != MIN_int32)
             {
-                DeltaZMin = FMath::Max(DeltaZMin, FloorDiv(MinChunkZ, Pow) - CenterLevel.Z);
-                DeltaZMax = FMath::Min(DeltaZMax, FloorDiv(MaxChunkZ, Pow) - CenterLevel.Z);
+                TileMinZ = FMath::Max<int64>(TileMinZ, FloorDiv(MinChunkZ, Pow));
+                TileMaxZ = FMath::Min<int64>(TileMaxZ, FloorDiv(MaxChunkZ, Pow));
             }
 
-            for (int32 DeltaZ = DeltaZMin; DeltaZ <= DeltaZMax; ++DeltaZ)
-            for (int32 DeltaY = RingMin.Y - CenterLevel.Y;
-                 DeltaY <= RingMax.Y - CenterLevel.Y; ++DeltaY)
-            for (int32 DeltaX = RingMin.X - CenterLevel.X;
-                 DeltaX <= RingMax.X - CenterLevel.X; ++DeltaX)
+            for (int64 Z = TileMinZ; Z <= TileMaxZ; ++Z)
+            for (int64 Y = RingMin.Y; Y <= RingMax.Y; ++Y)
+            for (int64 X = RingMin.X; X <= RingMax.X; ++X)
             {
-                const FIntVector Tile = CenterLevel + FIntVector(DeltaX, DeltaY, DeltaZ);
-                const int32 TileMinZ = Tile.Z << Level;
-                const int32 TileMaxZ = ((Tile.Z + 1) << Level) - 1;
-                if (TileMaxZ < MinChunkZ || TileMinZ > MaxChunkZ)
+                const FIntVector Tile(static_cast<int32>(X), static_cast<int32>(Y),
+                                      static_cast<int32>(Z));
+                const int64 TileBottomChunkZ = static_cast<int64>(Tile.Z) * Pow;
+                const int64 TileTopChunkZ = (static_cast<int64>(Tile.Z) + 1) * Pow - 1;
+                if (TileTopChunkZ < MinChunkZ || TileBottomChunkZ > MaxChunkZ)
                 {
                     continue;
                 }
@@ -130,12 +163,12 @@ namespace VoxelClipmapDesiredTiles
                 if (Level > 0)
                 {
                     const bool bCovered =
-                        (2 * Tile.X >= PreviousRingMin.X)
-                        && (2 * Tile.X + 1 <= PreviousRingMax.X)
-                        && (2 * Tile.Y >= PreviousRingMin.Y)
-                        && (2 * Tile.Y + 1 <= PreviousRingMax.Y)
-                        && (2 * Tile.Z >= PreviousRingMin.Z)
-                        && (2 * Tile.Z + 1 <= PreviousRingMax.Z);
+                        (2 * static_cast<int64>(Tile.X) >= PreviousRingMin.X)
+                        && (2 * static_cast<int64>(Tile.X) + 1 <= PreviousRingMax.X)
+                        && (2 * static_cast<int64>(Tile.Y) >= PreviousRingMin.Y)
+                        && (2 * static_cast<int64>(Tile.Y) + 1 <= PreviousRingMax.Y)
+                        && (2 * static_cast<int64>(Tile.Z) >= PreviousRingMin.Z)
+                        && (2 * static_cast<int64>(Tile.Z) + 1 <= PreviousRingMax.Z);
                     if (bCovered)
                     {
                         continue;

Source/VoxelForge/Private/VoxelContentManager.cpp

@@ -18,6 +18,7 @@
 #include "Materials/MaterialInterface.h"
 #include "Tasks/Task.h"
 #include "HAL/PlatformProcess.h"
+#include "Misc/Crc.h"
 #include "ProfilingDebugging/CpuProfilerTrace.h"   // Unreal Insights scopes
 #include <VoxelForgeCore/VoxelForgeCore.h>
 #include <cmath>
@@ -240,10 +241,10 @@ static std::vector<VoxelForgeCore::WorldAssemblyFeatureQueryV1> VF_ContentFeatur
 {
     using namespace VoxelForgeCore;
     constexpr double Q = WorldAssemblySubvoxelsPerVoxel;
-    const std::array<int64,3> Min{static_cast<int64>(std::floor(MinX*Q)),
-        static_cast<int64>(std::floor(MinY*Q)),static_cast<int64>(std::floor(MinZ*Q))};
-    const std::array<int64,3> Max{static_cast<int64>(std::ceil(MaxX*Q)),
-        static_cast<int64>(std::ceil(MaxY*Q)),static_cast<int64>(std::ceil(MaxZ*Q))};
+    const std::array<std::int64_t,3> Min{static_cast<std::int64_t>(std::floor(MinX*Q)),
+        static_cast<std::int64_t>(std::floor(MinY*Q)),static_cast<std::int64_t>(std::floor(MinZ*Q))};
+    const std::array<std::int64_t,3> Max{static_cast<std::int64_t>(std::ceil(MaxX*Q)),
+        static_cast<std::int64_t>(std::ceil(MaxY*Q)),static_cast<std::int64_t>(std::ceil(MaxZ*Q))};
     std::vector<WorldAssemblyFeatureQueryV1> Queries;
     if (Surface)
         if (const auto* Plan = Surface->FindPlan(StrateIndex))
@@ -322,11 +323,54 @@ void UVoxelContentManager::Initialize(AActor* InOwner, UVoxelStrateManager* InSt
     Seed = InSeed;
     NativeSurfaceSnapshot.Reset();
     NativeFloatingIslandSnapshot.Reset();
+    CoreGeometryAnchors.Reset();
 
     if (Settings)
     {
         FString ManifestJson, ManifestHash, ManifestError;
         const AVoxelWorld* VoxelWorld = Cast<AVoxelWorld>(Owner.Get());
+        FString ResolvedLayoutJson, ResolvedLayoutIdentity;
+        if (VoxelWorld != nullptr
+            && VoxelWorld->GetVoxelForgeCoreResolvedLayout(ResolvedLayoutJson, ResolvedLayoutIdentity))
+        {
+            FTCHARToUTF8 Utf8Layout(*ResolvedLayoutJson);
+            std::string LayoutError;
+            const std::optional<VoxelForgeCore::ResolvedLayoutSnapshotV3> ResolvedLayout =
+                VoxelForgeCore::ResolvedLayoutSnapshotV3::FromJson(
+                    std::string_view(Utf8Layout.Get(), static_cast<std::size_t>(Utf8Layout.Length())), LayoutError);
+            if (ResolvedLayout)
+            {
+                const auto AddAnchor = [this](const std::string& StableId, int32 StrateIndex,
+                    const std::array<std::int64_t, 3>& PositionMicrometres)
+                {
+                    const FVector PositionCm(
+                        static_cast<double>(PositionMicrometres[0]) / 10000.0,
+                        static_cast<double>(PositionMicrometres[1]) / 10000.0,
+                        static_cast<double>(PositionMicrometres[2]) / 10000.0);
+                    const FString FullName = UTF8_TO_TCHAR(StableId.c_str());
+                    FResolvedCoreGeometryAnchor Anchor{ StrateIndex, PositionCm };
+                    CoreGeometryAnchors.Add(FullName, Anchor);
+                    const int32 Marker = FullName.Find(TEXT("/core/"), ESearchCase::CaseSensitive, ESearchDir::FromEnd);
+                    if (Marker != INDEX_NONE)
+                    {
+                        const FString ShortName = FullName.Mid(Marker + 6);
+                        if (!ShortName.IsEmpty()) CoreGeometryAnchors.Add(ShortName, Anchor);
+                    }
+                };
+                for (const VoxelForgeCore::ResolvedLayoutStampV1& Stamp : ResolvedLayout->stamps)
+                    AddAnchor(Stamp.stableId, Stamp.strateIndex, Stamp.positionMicrometres);
+                for (const VoxelForgeCore::ResolvedCavernRoomV1& Room : ResolvedLayout->cavernRooms)
+                    AddAnchor(Room.stableId, Room.strateIndex, Room.centerMicrometres);
+                for (const VoxelForgeCore::ResolvedCavernEdgeV1& Edge : ResolvedLayout->cavernEdges)
+                    if (!Edge.polylineMicrometres.empty())
+                        AddAnchor(Edge.stableId, Edge.strateIndex, Edge.polylineMicrometres.front());
+            }
+            else
+            {
+                UE_LOG(LogTemp, Warning, TEXT("[VoxelContentManager] Could not read resolved Core geometry anchors: %s"),
+                    UTF8_TO_TCHAR(LayoutError.c_str()));
+            }
+        }
         const bool bHasRuntimeAssembly = VoxelWorld != nullptr
             && VoxelWorld->GetVoxelForgeCoreWorldAssembly(ManifestJson, ManifestHash);
         if (!bHasRuntimeAssembly)
@@ -559,9 +603,13 @@ int32 UVoxelContentManager::RegionSize() const
 // truncation, a negative-coord cell is queued under one region but routed back to another → its march
 // result is dropped → blank chunk. Truncation == floor for A>=0 and for R==1, which is exactly why only
 // NEGATIVE coordinates at R>=2 were affected. R (region size) is always > 0 here.
-static FORCEINLINE int32 FloorDivPos(int32 A, int32 R)
+static FORCEINLINE int32 FloorDivPos(int64 A, int32 R)
 {
-    return (A >= 0) ? (A / R) : -(((-A) + R - 1) / R);
+    if (R <= 0) { return 0; }
+    const int64 Quotient = A / R;
+    const int64 Remainder = A % R;
+    return static_cast<int32>(FMath::Clamp<int64>(
+        Remainder < 0 ? Quotient - 1 : Quotient, MIN_int32, MAX_int32));
 }
 
 static FORCEINLINE FIntPoint CellToRegion(const FIntPoint& Cell, int32 R)
@@ -573,10 +621,10 @@ static FORCEINLINE FIntPoint CellToRegion(const FIntPoint& Cell, int32 R)
 static FORCEINLINE bool IsRegionDesired(const FIntPoint& Region, const FIntPoint& PlayerCell,
                                         int32 FarR, int32 R)
 {
-    const int32 MinX = FloorDivPos(PlayerCell.X - FarR, R);
-    const int32 MaxX = FloorDivPos(PlayerCell.X + FarR, R);
-    const int32 MinY = FloorDivPos(PlayerCell.Y - FarR, R);
-    const int32 MaxY = FloorDivPos(PlayerCell.Y + FarR, R);
+    const int32 MinX = FloorDivPos(static_cast<int64>(PlayerCell.X) - FarR, R);
+    const int32 MaxX = FloorDivPos(static_cast<int64>(PlayerCell.X) + FarR, R);
+    const int32 MinY = FloorDivPos(static_cast<int64>(PlayerCell.Y) - FarR, R);
+    const int32 MaxY = FloorDivPos(static_cast<int64>(PlayerCell.Y) + FarR, R);
     return Region.X >= MinX && Region.X <= MaxX && Region.Y >= MinY && Region.Y <= MaxY;
 }
 
@@ -1038,8 +1086,19 @@ bool UVoxelContentManager::MeasurePlacementCostForValidation(
                 OutAudit.MaximumDensityResidual=FMath::Max(OutAudit.MaximumDensityResidual,
                     FMath::Abs(static_cast<double>(Density)));
                 ++OutAudit.AnchorChecks;
-                if (FMath::Abs(Density)>0.25f)
-                { OutError=TEXT("Populated fixture is not anchored on the canonical field."); return false; }
+                // Core content crossings use the same finite-step column refinement as runtime
+                // placement. Allow at most half a Core voxel of field residual in this audit.
+                // Les croisements de contenu Core gardent le raffinement discret du runtime;
+                // l'audit tolere au plus un demi-voxel Core de residu de champ.
+                if (FMath::Abs(Density)>0.5f)
+                {
+                    OutError=FString::Printf(
+                        TEXT("Populated fixture is not anchored on the canonical field: residual=%.4f core_vox=(%.3f,%.3f,%.3f) local_cm=(%.2f,%.2f,%.2f)."),
+                        Density, Local.X/CurrentCtx.VoxelSizeCm,
+                        Local.Y/CurrentCtx.VoxelSizeCm, Local.Z/CurrentCtx.VoxelSizeCm,
+                        Local.X, Local.Y, Local.Z);
+                    return false;
+                }
             }
         }
         if (!Spawns.IsEmpty())
@@ -1102,17 +1161,22 @@ void UVoxelContentManager::RebuildDesiredCells(FDecoGrid& G, const FIntPoint& Pl
     const int32 R    = RegionSize();
 
     // Desired regions = every region whose footprint touches the radius-FarR cell box around the player.
-    const FIntPoint RMin(FloorDivPos(PlayerCell.X - FarR, R),
-                         FloorDivPos(PlayerCell.Y - FarR, R));
-    const FIntPoint RMax(FloorDivPos(PlayerCell.X + FarR, R),
-                         FloorDivPos(PlayerCell.Y + FarR, R));
+    const FIntPoint RMin(FloorDivPos(static_cast<int64>(PlayerCell.X) - FarR, R),
+                         FloorDivPos(static_cast<int64>(PlayerCell.Y) - FarR, R));
+    const FIntPoint RMax(FloorDivPos(static_cast<int64>(PlayerCell.X) + FarR, R),
+                         FloorDivPos(static_cast<int64>(PlayerCell.Y) + FarR, R));
 
     TSet<FIntPoint> DesiredRegions;
-    DesiredRegions.Reserve((RMax.X - RMin.X + 1) * (RMax.Y - RMin.Y + 1));
-    for (int32 ry = RMin.Y; ry <= RMax.Y; ++ry)
-    for (int32 rx = RMin.X; rx <= RMax.X; ++rx)
+    constexpr int64 MaxRegionReserve = 4096;
+    const int64 WidthX = static_cast<int64>(RMax.X) - RMin.X + 1;
+    const int64 WidthY = static_cast<int64>(RMax.Y) - RMin.Y + 1;
+    const int64 ReserveCount = WidthY > 0 && WidthX > MaxRegionReserve / WidthY
+        ? MaxRegionReserve : FMath::Max<int64>(0, WidthX * WidthY);
+    DesiredRegions.Reserve(static_cast<int32>(ReserveCount));
+    for (int64 ry = RMin.Y; ry <= RMax.Y; ++ry)
+    for (int64 rx = RMin.X; rx <= RMax.X; ++rx)
     {
-        DesiredRegions.Add(FIntPoint(rx, ry));
+        DesiredRegions.Add(FIntPoint(static_cast<int32>(rx), static_cast<int32>(ry)));
     }
 
     // Unload loaded regions no longer desired (plain DestroyComponent — no per-instance removal).
@@ -1464,8 +1528,15 @@ void UVoxelContentManager::BuildCellSpawns(const UVoxelGenerator* Gen, const FTr
                 const uint32 CH = VoxelHash::Mix(H ^ (0x00C0FFEEu + (uint32)ci * 0x9E3779B1u));
                 if (VoxelHash::ToFloat01(CH) > Comp.Probability) continue;
 
-                const int32 Span  = FMath::Max(0, Comp.CountMax - Comp.CountMin);
-                const int32 Count = Comp.CountMin + (int32)(VoxelHash::ToFloat01(VoxelHash::Mix(CH ^ 0x1234u)) * (float)(Span + 1));
+                const int64 Span = FMath::Max<int64>(0,
+                    static_cast<int64>(Comp.CountMax) - Comp.CountMin);
+                const uint64 CountRange = static_cast<uint64>(Span) + 1u;
+                const float CountOffset = VoxelHash::ToFloat01(
+                    VoxelHash::Mix(CH ^ 0x1234u)) * static_cast<float>(CountRange);
+                const int64 CountWide = static_cast<int64>(Comp.CountMin)
+                    + static_cast<int64>(CountOffset);
+                const int32 Count = static_cast<int32>(FMath::Clamp<int64>(
+                    CountWide, MIN_int32, MAX_int32));
                 for (int32 ii = 0; ii < Count; ++ii)
                 {
                     if (CompBudget <= 0) break;
@@ -1514,8 +1585,15 @@ void UVoxelContentManager::BuildCellSpawns(const UVoxelGenerator* Gen, const FTr
                         const uint32 SH = VoxelHash::Mix(IH ^ (0x0000544Bu + (uint32)si * 0x27D4EB2Fu));
                         if (VoxelHash::ToFloat01(SH) > Sub.Probability) continue;
 
-                        const int32 SubSpan  = FMath::Max(0, Sub.CountMax - Sub.CountMin);
-                        const int32 SubCount = Sub.CountMin + (int32)(VoxelHash::ToFloat01(VoxelHash::Mix(SH ^ 0x1234u)) * (float)(SubSpan + 1));
+                        const int64 SubSpan = FMath::Max<int64>(0,
+                            static_cast<int64>(Sub.CountMax) - Sub.CountMin);
+                        const uint64 SubCountRange = static_cast<uint64>(SubSpan) + 1u;
+                        const float SubCountOffset = VoxelHash::ToFloat01(
+                            VoxelHash::Mix(SH ^ 0x1234u)) * static_cast<float>(SubCountRange);
+                        const int64 SubCountWide = static_cast<int64>(Sub.CountMin)
+                            + static_cast<int64>(SubCountOffset);
+                        const int32 SubCount = static_cast<int32>(FMath::Clamp<int64>(
+                            SubCountWide, MIN_int32, MAX_int32));
                         for (int32 sj = 0; sj < SubCount; ++sj)
                         {
                             if (CompBudget <= 0) break;
@@ -2374,6 +2452,28 @@ void UVoxelContentManager::UpdateLandmarks(const FVector& PlayerWorldPos)
         const float ExclWorld    = FMath::Max(0.0f, L.ExclusionRadiusChunks) * ChunkWorld;
         if (ExclWorld > 0.0f) bAnyExclusion = true;
 
+        if (!L.CoreGeometryStableName.IsEmpty())
+        {
+            const FResolvedCoreGeometryAnchor* Anchor = CoreGeometryAnchors.Find(L.CoreGeometryStableName);
+            if (Anchor == nullptr || Anchor->StrateIndex != StrateIndex) continue;
+            const uint32 StableNameHash = FCrc::StrCrc32(*L.CoreGeometryStableName);
+            const uint32 H = DecoHash(static_cast<int32>(StableNameHash), StrateIndex,
+                0, 0, 0, EntryIdx, LocalSeed, 0xC04E6E0u);
+            if (VoxelHash::ToFloat01(H) > L.SpawnProbability) continue;
+            const float LocalX = static_cast<float>(Anchor->LocalPositionCm.X);
+            const float LocalY = static_cast<float>(Anchor->LocalPositionCm.Y);
+            const float dx = LocalX - LocalPlayer.X, dy = LocalY - LocalPlayer.Y;
+            const float DistSq = dx * dx + dy * dy;
+            if (DistSq <= GatherWorld * GatherWorld)
+            {
+                // A Core-bound landmark is one stable candidate, independent of the hash lattice.
+                // Un landmark lie a Core reste un candidat stable, independant de la grille de hachage.
+                Cands.Add({ FIntVector(EntryIdx, 0, EntryIdx), EntryIdx, H, LocalX, LocalY,
+                    ExclWorld, L.Priority, DistSq <= RadiusWorld * RadiusWorld });
+            }
+            continue;
+        }
+
         if (L.AnchorMode == ELandmarkAnchor::HashLattice)
         {
             const float SpacingChunks = FMath::Max(1.0f, L.SpacingChunks);

Source/VoxelForge/Private/VoxelDensityVolume.cpp

@@ -155,9 +155,11 @@ int32 UVoxelDensityVolume::NumLevels() const
 
 FORCEINLINE int32 UVoxelDensityVolume::FloorDiv(int32 A, int32 B)
 {
-    // True floor division (B > 0). FMath::DivideAndRoundDown truncates toward zero for negatives —
-    // a footgun the content manager hit too (see FloorDivPos there). Cells span the origin, so floor.
-    return (A >= 0) ? (A / B) : -(((-A) + B - 1) / B);
+    // True floor division (B > 0). Remainder adjustment handles INT_MIN without negating it.
+    if (B <= 0) { return 0; }
+    const int32 Quotient = A / B;
+    const int32 Remainder = A % B;
+    return Remainder < 0 ? Quotient - 1 : Quotient;
 }
 
 FORCEINLINE uint8 UVoxelDensityVolume::Quantize(float MCDensity)
@@ -180,7 +182,8 @@ void UVoxelDensityVolume::EnsureAllocated()
     for (int32 L = 0; L < N; ++L)
     {
         FClipLevel& Lv = Levels[L];
-        Lv.Step = 1 << L;
+        Lv.Step = static_cast<int32>(uint32{1}
+            << static_cast<uint32>(FMath::Clamp(L, 0, 8)));
         Lv.OriginCells = FIntVector(INT32_MAX, INT32_MAX, INT32_MAX);
         Lv.bHasData = false;
         Lv.Density.SetNumZeroed(Count);   // start all-air (0)
@@ -632,7 +635,8 @@ void UVoxelDensityVolume::ProcessOneFill(const FPendingFill& F)
     if (!Gen) return;
     if (bShuttingDown.load(std::memory_order_relaxed) || bFillThreadStop.load(std::memory_order_relaxed)) return;
 
-    const int32 Step = 1 << F.Level;
+    const int32 Step = static_cast<int32>(uint32{1}
+        << static_cast<uint32>(FMath::Clamp(F.Level, 0, 8)));
     FFillResult R;
     R.Level = F.Level;
     R.Epoch = F.Epoch;

Source/VoxelForge/Private/VoxelForgeAssetVersion.h

@@ -0,0 +1,12 @@
+#pragma once
+
+#include "CoreMinimal.h"
+
+// Shared custom package version for idempotent VoxelForge asset migrations.
+// Version de package partagee pour les migrations VoxelForge idempotentes.
+namespace VoxelForgeAssetVersion
+{
+    inline const FGuid GUID(0xA76D5E31, 0x4B2C4F9A, 0xB8C1D204, 0x6E9F7738);
+    inline constexpr int32 TunnelFloorSlopeDegrees = 1;
+    inline constexpr int32 MetreAuthoringV1 = 2;
+}

Source/VoxelForge/Private/VoxelRedefinedDensityField.cpp

@@ -2590,8 +2590,8 @@ static float EvaluateInternal(const UVoxelGenerator& Generator,
     {
         EnsurePlan(Generator);
     }
-    const bool bChunkResolved = Context != nullptr && Context->bChunkResolved
-        || ParameterizedContext != nullptr && ParameterizedContext->bChunkResolved;
+    const bool bChunkResolved = (Context != nullptr && Context->bChunkResolved)
+        || (ParameterizedContext != nullptr && ParameterizedContext->bChunkResolved);
     const FIntVector Chunk = Context != nullptr && Context->bChunkResolved
         ? Context->Chunk
         : ParameterizedContext != nullptr && ParameterizedContext->bChunkResolved

Source/VoxelForge/Private/VoxelSeasonManifest.cpp

@@ -1958,10 +1958,11 @@ namespace VoxelSeasonCompositionPrivate
     }
 
     void CopyDefinitionParams(const UVoxelStrateDefinition& Definition,
-                              FVoxelSeasonFixedStrate& OutFixed)
+                              double LayoutChunkMeters, FVoxelSeasonFixedStrate& OutFixed)
     {
         OutFixed = FVoxelSeasonFixedStrate();
-        OutFixed.HeightInChunks = Definition.StrateHeightInChunks;
+        OutFixed.HeightInChunks = FMath::Max(1, FMath::RoundToInt(
+            Definition.StrateHeightMeters / FMath::Max(0.001, LayoutChunkMeters)));
         OutFixed.Archetype = Definition.GeneratorType;
         OutFixed.SourceDefinitionPath = Definition.GetPathName();
         OutFixed.bUsesRecipe = false;
@@ -1999,7 +2000,9 @@ namespace VoxelSeasonCompositionPrivate
                 return false;
             }
             FVoxelSeasonFixedStrate Fixed;
-            CopyDefinitionParams(*Definition, Fixed);
+            const double LayoutChunkMeters = Settings.WorldSettings != nullptr
+                ? Settings.WorldSettings->StrateLayoutChunkSizeMeters : 8.0;
+            CopyDefinitionParams(*Definition, LayoutChunkMeters, Fixed);
             Fixed.Seed = SeasonSeed;
             if (Fixed.SourceDefinitionPath.IsEmpty())
             {
@@ -2974,7 +2977,9 @@ FVoxelSeasonManifest VF_ComposeSeason(int32 SeasonSeed, const UVoxelSettings* Wo
     if (WorldSettings != nullptr)
     {
         Settings.SelectedStrateCount = WorldSettings->TotalStrates;
-        Settings.InterStrateGapChunks = WorldSettings->InterStrateGapChunks;
+        Settings.InterStrateGapChunks = FMath::Max(0, FMath::RoundToInt(
+            WorldSettings->InterStrateGapMeters * 1000000.0
+                / FMath::Max(1.0, static_cast<double>(WorldSettings->StrateLayoutChunkSizeMeters) * 1000000.0)));
         Settings.OriginSpineRadius = WorldSettings->OriginSpineRadius;
         Settings.WorldRadiusVoxels = WorldSettings->WorldRadiusVoxels;
         Settings.SeasonNumber = WorldSettings->CurrentSeason;

Source/VoxelForge/Private/VoxelSettings.cpp

@@ -1,5 +1,7 @@
 #include "VoxelSettings.h"
 
+#include "VoxelForgeAssetVersion.h"
+#include "VoxelStrateDefinition.h"
 #include "VoxelSeasonAsset.h"
 
 #if WITH_EDITOR
@@ -9,6 +11,74 @@
 #include <VoxelForgeCore/VoxelForgeCore.h>
 #include <string>
 
+void UVoxelSettings::Serialize(FArchive& Ar)
+{
+    Ar.UsingCustomVersion(VoxelForgeAssetVersion::GUID);
+    Super::Serialize(Ar);
+    if (Ar.IsLoading() && Ar.CustomVer(VoxelForgeAssetVersion::GUID)
+        < VoxelForgeAssetVersion::MetreAuthoringV1)
+    {
+        const double LayoutChunkMeters = FMath::IsFinite(StrateLayoutChunkSizeMeters)
+            ? FMath::Max(0.001, static_cast<double>(StrateLayoutChunkSizeMeters)) : 8.0;
+        InterStrateGapMeters = static_cast<double>(FMath::Max(0, InterStrateGapChunks))
+            * LayoutChunkMeters;
+        UE_LOG(LogTemp, Display,
+            TEXT("[VoxelForgeAssetUpgrade] type=Settings asset=%s gap_chunks=%d gap_m=%.6f layout_chunk_m=%.6f"),
+            *GetPathName(), InterStrateGapChunks, InterStrateGapMeters, LayoutChunkMeters);
+    }
+}
+
+void UVoxelSettings::PostLoad()
+{
+    Super::PostLoad();
+    if (GetLinkerCustomVersion(VoxelForgeAssetVersion::GUID)
+        >= VoxelForgeAssetVersion::MetreAuthoringV1)
+    {
+        return;
+    }
+
+    // Resolve the legacy count against this settings asset's saved physical layout width.
+    // Convertit les anciens comptes avec la largeur physique sauvegardee dans ces reglages.
+    const double LayoutChunkMeters = FMath::IsFinite(StrateLayoutChunkSizeMeters)
+        ? FMath::Max(0.001, static_cast<double>(StrateLayoutChunkSizeMeters)) : 8.0;
+    InterStrateGapMeters = static_cast<double>(FMath::Max(0, InterStrateGapChunks))
+        * LayoutChunkMeters;
+
+    TSet<UVoxelStrateDefinition*> Migrated;
+    const auto MigrateStrate = [this, LayoutChunkMeters, &Migrated](
+        const TSoftObjectPtr<UVoxelStrateDefinition>& SoftDefinition)
+    {
+        UVoxelStrateDefinition* Definition = SoftDefinition.LoadSynchronous();
+        if (Definition == nullptr || Migrated.Contains(Definition)
+            || Definition->GetLinkerCustomVersion(VoxelForgeAssetVersion::GUID)
+                >= VoxelForgeAssetVersion::MetreAuthoringV1)
+        {
+            return;
+        }
+        Migrated.Add(Definition);
+        const int32 OldHeightChunks = Definition->StrateHeightInChunks;
+        const int32 OldTransitionChunks = Definition->TransitionBlendChunks;
+        Definition->StrateHeightMeters = static_cast<double>(FMath::Max(1, OldHeightChunks))
+            * LayoutChunkMeters;
+        Definition->TransitionWidthMeters = static_cast<double>(FMath::Max(0, OldTransitionChunks))
+            * LayoutChunkMeters;
+        Definition->MarkPackageDirty();
+        UE_LOG(LogTemp, Display,
+            TEXT("[VoxelForgeAssetUpgrade] type=Strate asset=%s height_chunks=%d height_m=%.6f transition_chunks=%d transition_m=%.6f effective_layout_chunk_m=%.6f"),
+            *Definition->GetPathName(), OldHeightChunks, Definition->StrateHeightMeters,
+            OldTransitionChunks, Definition->TransitionWidthMeters, LayoutChunkMeters);
+    };
+    for (const TSoftObjectPtr<UVoxelStrateDefinition>& Definition : StratePool)
+    {
+        MigrateStrate(Definition);
+    }
+    for (const TPair<int32, TSoftObjectPtr<UVoxelStrateDefinition>>& Definition : FixedStrates)
+    {
+        MigrateStrate(Definition.Value);
+    }
+    MarkPackageDirty();
+}
+
 int32 UVoxelSettings::GetEffectiveWorldSeed() const
 {
     if (!Season.IsNull())

Source/VoxelForge/Private/VoxelStartupTrace.cpp

@@ -297,7 +297,11 @@ void RecordTile(const FTileSample& Sample)
              "\"submitted_t_s\":%s,\"worker_start_t_s\":%s,\"worker_end_t_s\":%s,\"worker_thread_id\":%u,"
              "\"verdict\":%d,\"proof\":%d,\"empty\":%d,\"vertices\":%d,\"triangles\":%d,\"geometry_bytes\":%llu,"
              "\"request_to_apply_s\":%s,\"queue_wait_s\":%s,\"worker_queue_s\":%s,\"result_queue_s\":%s,\"worker_task_s\":%s,"
-             "\"generation_s\":%s,\"classify_s\":%s,\"mesh_s\":%s,\"stream_s\":%s,\"apply_s\":%s"),
+             "\"generation_s\":%s,"
+#if PLATFORM_LINUX
+             "\"core_generate_s\":%s,\"mesh_copy_s\":%s,\"rmc_stream_build_s\":%s,"
+#endif
+             "\"classify_s\":%s,\"mesh_s\":%s,\"stream_s\":%s,\"apply_s\":%s"),
         Sample.TileX, Sample.TileY, Sample.TileZ,
         Sample.Level, Sample.WorkPriority,
         static_cast<unsigned long long>(Sample.RequestOrdinal),
@@ -312,8 +316,12 @@ void RecordTile(const FTileSample& Sample)
         static_cast<unsigned long long>(Sample.GeometryBytes),
         *Number(Sample.RequestToApplySeconds), *Number(Sample.QueueWaitSeconds),
         *Number(Sample.WorkerQueueSeconds), *Number(Sample.ResultQueueSeconds),
-        *Number(Sample.WorkerTaskSeconds),
-        *Number(Sample.GenerationSeconds), *Number(Sample.ClassifySeconds),
+        *Number(Sample.WorkerTaskSeconds), *Number(Sample.GenerationSeconds),
+#if PLATFORM_LINUX
+        *Number(Sample.CoreGenerateSeconds), *Number(Sample.MeshCopySeconds),
+        *Number(Sample.StreamBuildSeconds),
+#endif
+        *Number(Sample.ClassifySeconds),
         *Number(Sample.MeshSeconds), *Number(Sample.StreamSeconds), *Number(Sample.ApplySeconds)));
 }
 

Source/VoxelForge/Private/VoxelStrateDefinition.cpp

@@ -1,20 +1,17 @@
 // Serialized strate-definition migrations.
 
 #include "VoxelStrateDefinition.h"
+#include "VoxelForgeAssetVersion.h"
 
 #include "Serialization/CustomVersion.h"
 #include "VoxelPassageGeometry.h"
 
 namespace
 {
-    // The field name is retained for package compatibility, but version 1 changes its meaning
-    // from a raw tangent/gradient to authored degrees. This GUID is local to the plugin.
-    const FGuid GVoxelForgeStrateSerializationVersion(
-        0xA76D5E31, 0x4B2C4F9A, 0xB8C1D204, 0x6E9F7738);
-    constexpr int32 GVoxelForgeStrateGentleSlopeDegreesVersion = 1;
+    constexpr int32 GVoxelForgeStrateGentleSlopeDegreesVersion = VoxelForgeAssetVersion::TunnelFloorSlopeDegrees;
     FCustomVersionRegistration GVoxelForgeStrateSerializationRegistration(
-        GVoxelForgeStrateSerializationVersion,
-        GVoxelForgeStrateGentleSlopeDegreesVersion,
+        VoxelForgeAssetVersion::GUID,
+        VoxelForgeAssetVersion::MetreAuthoringV1,
         TEXT("VoxelForgeStrateSerialization"));
 
     float LegacyGradientToDegrees(float LegacyGradient)
@@ -58,6 +55,31 @@ namespace
     }
 }
 
+void UVoxelStrateDefinition::Serialize(FArchive& Ar)
+{
+    Ar.UsingCustomVersion(VoxelForgeAssetVersion::GUID);
+    Super::Serialize(Ar);
+
+    if (Ar.IsLoading() && Ar.CustomVer(VoxelForgeAssetVersion::GUID)
+        < VoxelForgeAssetVersion::MetreAuthoringV1)
+    {
+        // A stand-alone strate has no owning settings object during Serialize. Convert using the
+        // current 8 m layout default here; UVoxelSettings corrects referenced old strates using
+        // their saved effective width during its own load upgrade.
+        // Une strate seule n'a pas ses reglages proprietaires ici; UVoxelSettings corrige ensuite
+        // les references avec leur largeur physique sauvegardee.
+        constexpr double LegacyDefaultLayoutChunkMeters = 8.0;
+        StrateHeightMeters = static_cast<double>(FMath::Max(1, StrateHeightInChunks))
+            * LegacyDefaultLayoutChunkMeters;
+        TransitionWidthMeters = static_cast<double>(FMath::Max(0, TransitionBlendChunks))
+            * LegacyDefaultLayoutChunkMeters;
+        UE_LOG(LogTemp, Display,
+            TEXT("[VoxelForgeAssetUpgrade] type=Strate asset=%s height_chunks=%d height_m=%.6f transition_chunks=%d transition_m=%.6f fallback_layout_chunk_m=%.6f"),
+            *GetPathName(), StrateHeightInChunks, StrateHeightMeters,
+            TransitionBlendChunks, TransitionWidthMeters, LegacyDefaultLayoutChunkMeters);
+    }
+}
+
 void UVoxelStrateDefinition::PostLoad()
 {
     Super::PostLoad();
@@ -67,7 +89,7 @@ void UVoxelStrateDefinition::PostLoad()
     // is normalized to the ignored compatibility default before any runtime copy is made.
     GenerationParams.bTunnelFloorEnabled = true;
 
-    if (GetLinkerCustomVersion(GVoxelForgeStrateSerializationVersion)
+    if (GetLinkerCustomVersion(VoxelForgeAssetVersion::GUID)
         >= GVoxelForgeStrateGentleSlopeDegreesVersion)
     {
         return;

Source/VoxelForge/Private/VoxelStrateManager.cpp

@@ -13,6 +13,7 @@
 #include "VoxelTerrainOpDefinition.h"  // For UVoxelTerrainOpDefinition::ApplyTo
 #include "VoxelBiomeDefinition.h"  // For UVoxelBiomeDefinition (biome context flatten)
 #include "HAL/IConsoleManager.h"
+#include <cmath>  // std::llround
 #include "Misc/CommandLine.h"
 #include "Misc/Crc.h"
 #include "Misc/Parse.h"
@@ -24,6 +25,27 @@ namespace
 {
     std::atomic<uint64> GNextStrateManagerLifetimeId { 0 };
 
+    int64 VF_OwnerVoxelsToMicrometres(double OwnerVoxels)
+    {
+        return static_cast<int64>(std::llround(
+            OwnerVoxels * static_cast<double>(VOXEL_SIZE) * 10000.0));
+    }
+
+    float VF_ResolvedWorldMicrometresToOwnerVoxels(int64 WorldMicrometres)
+    {
+        return static_cast<float>(static_cast<double>(WorldMicrometres)
+            / (static_cast<double>(VOXEL_SIZE) * 10000.0));
+    }
+
+    int64 VF_FloorDivide64(int64 Numerator, int64 Denominator)
+    {
+        if (Denominator <= 0) return 0;
+        int64 Quotient = Numerator / Denominator;
+        const int64 Remainder = Numerator % Denominator;
+        if (Remainder < 0) --Quotient;
+        return Quotient;
+    }
+
     // Exact A/B switch for the repeated passage-floor projection item.  The other field-
     // preserving rewrites in this round are deliberately unconditional; this switch isolates
     // the projection reuse without changing any density arithmetic.
@@ -1233,7 +1255,8 @@ bool UVoxelStrateManager::Initialize(UVoxelSettings* Settings, int32 WorldSeed)
         ? SeasonManifest.Strates.Num() : Settings->TotalStrates;
     const int32 LayoutGapChunks = bUseSeason
         ? SeasonManifest.InterStrateGapChunks
-        : FMath::Max(0, Settings->InterStrateGapChunks);
+        : FMath::Max(0, FMath::RoundToInt(static_cast<double>(Settings->InterStrateGapMeters)
+            * 1000000.0 / std::max<uint32>(1, StrateLayoutChunkSizeMicrometres)));
 
     //=========================================================================
     // STEP 1: Build shuffled pool (seed-based randomization)
@@ -1300,8 +1323,11 @@ bool UVoxelStrateManager::Initialize(UVoxelSettings* Settings, int32 WorldSeed)
         }
     }
 
-    // Current Z position (in chunks). Starts at 0 and goes downward (negative).
-    int32 CurrentTopZ = 0;
+    // Resolve the stack in physical integer micrometres first. The historical chunk indices are
+    // projected from these half-open bounds only after each slot is complete.
+    int64 CurrentTopWorldMicrometres = StrateLayoutChunkSizeMicrometres;
+    const int64 ResolvedGapMicrometres = static_cast<int64>(LayoutGapChunks)
+        * StrateLayoutChunkSizeMicrometres;
 
     for (int32 i = 0; i < TotalStrates; i++)
     {
@@ -1344,7 +1370,8 @@ bool UVoxelStrateManager::Initialize(UVoxelSettings* Settings, int32 WorldSeed)
             }
 
             Slot.Definition->GeneratorType = SeasonStrate.Archetype;
-            Slot.Definition->StrateHeightInChunks = SeasonStrate.HeightInChunks;
+            Slot.Definition->StrateHeightMeters = static_cast<double>(SeasonStrate.HeightInChunks)
+                * StrateLayoutChunkSizeMicrometres / 1000000.0;
             Slot.Definition->GenerationParams = SeasonStrate.Params.TunnelNetworkParams;
             Slot.Definition->SlabParams = SeasonStrate.Params.SlabParams;
             Slot.Definition->MazeParams = SeasonStrate.Params.MazeParams;
@@ -1356,16 +1383,28 @@ bool UVoxelStrateManager::Initialize(UVoxelSettings* Settings, int32 WorldSeed)
             const int32 LayoutChunkVoxels=FMath::RoundToInt(StrateLayoutChunkWidthVoxels);
             Slot.TopChunkZ = SeasonStrate.TopWorldZ / LayoutChunkVoxels - 1;
             Slot.BottomChunkZ = SeasonStrate.BottomWorldZ / LayoutChunkVoxels;
+            Slot.TopWorldMicrometres = (static_cast<int64>(Slot.TopChunkZ) + 1)
+                * StrateLayoutChunkSizeMicrometres;
+            Slot.BottomWorldMicrometres = static_cast<int64>(Slot.BottomChunkZ)
+                * StrateLayoutChunkSizeMicrometres;
+            Slot.HeightMicrometres = Slot.TopWorldMicrometres - Slot.BottomWorldMicrometres;
+            const int64 ExpectedTopChunk = VF_FloorDivide64(
+                CurrentTopWorldMicrometres, StrateLayoutChunkSizeMicrometres) - 1;
+            const int64 ExpectedBottomChunk = ExpectedTopChunk - (Slot.HeightInChunks - 1);
             if (SeasonStrate.TopWorldZ % LayoutChunkVoxels != 0
                 || SeasonStrate.BottomWorldZ % LayoutChunkVoxels != 0
-                || Slot.TopChunkZ != CurrentTopZ
-                || Slot.BottomChunkZ != CurrentTopZ - (Slot.HeightInChunks - 1))
+                || Slot.TopChunkZ != ExpectedTopChunk
+                || Slot.BottomChunkZ != ExpectedBottomChunk
+                || Slot.TopWorldMicrometres != CurrentTopWorldMicrometres
+                || Slot.HeightMicrometres != static_cast<int64>(Slot.HeightInChunks)
+                    * StrateLayoutChunkSizeMicrometres)
             {
                 UE_LOG(LogTemp, Error,
                     TEXT("[StrateManager] Season slot %d bounds do not describe the declared stacked layout."), i);
                 RestorePreviousLayout();
                 return false;
             }
+            CurrentTopWorldMicrometres = Slot.BottomWorldMicrometres - ResolvedGapMicrometres;
             SeasonStrates.Add(SeasonStrate);
         }
         else
@@ -1388,15 +1427,54 @@ bool UVoxelStrateManager::Initialize(UVoxelSettings* Settings, int32 WorldSeed)
                 continue;
             }
 
-            // Compute Z range from definition's height
-            Slot.HeightInChunks = Slot.Definition->StrateHeightInChunks;
-            Slot.TopChunkZ = CurrentTopZ;
-            Slot.BottomChunkZ = CurrentTopZ - (Slot.HeightInChunks - 1);
+            // Resolve the authored chunk height into an exact physical interval.
+            Slot.HeightInChunks = FMath::Max(1, FMath::RoundToInt(
+                Slot.Definition->StrateHeightMeters * 1000000.0
+                    / std::max<uint32>(1, StrateLayoutChunkSizeMicrometres)));
+            Slot.TopWorldMicrometres = CurrentTopWorldMicrometres;
+            Slot.HeightMicrometres = static_cast<int64>(Slot.HeightInChunks)
+                * StrateLayoutChunkSizeMicrometres;
+            Slot.BottomWorldMicrometres = Slot.TopWorldMicrometres - Slot.HeightMicrometres;
+            Slot.TopChunkZ = static_cast<int32>(VF_FloorDivide64(
+                Slot.TopWorldMicrometres, StrateLayoutChunkSizeMicrometres) - 1);
+            Slot.BottomChunkZ = static_cast<int32>(VF_FloorDivide64(
+                Slot.BottomWorldMicrometres, StrateLayoutChunkSizeMicrometres));
+            CurrentTopWorldMicrometres = Slot.BottomWorldMicrometres - ResolvedGapMicrometres;
         }
 
-        // Move the cursor down for the next strate, leaving a solid-bedrock gap of
-        // InterStrateGapChunks chunks between this strate and the next.
-        CurrentTopZ = Slot.BottomChunkZ - 1 - LayoutGapChunks;
+        Slot.ResolvedTransitionType = Slot.Definition->TransitionType;
+        Slot.ResolvedTransitionBlendChunks = FMath::Max(0, FMath::RoundToInt(
+            Slot.Definition->TransitionWidthMeters * 1000000.0
+                / std::max<uint32>(1, StrateLayoutChunkSizeMicrometres)));
+        Slot.TransitionWidthMicrometres = static_cast<int64>(Slot.ResolvedTransitionBlendChunks)
+            * StrateLayoutChunkSizeMicrometres;
+        Slot.ResolvedPassageConfig = Slot.Definition->PassageConfig;
+        Slot.PassageMouthRadiusMicrometres = VF_OwnerVoxelsToMicrometres(
+            Slot.ResolvedPassageConfig.MouthRadius);
+        Slot.PassageMidRadiusMicrometres = VF_OwnerVoxelsToMicrometres(
+            Slot.ResolvedPassageConfig.MidRadius);
+        Slot.PassageReachMinimumMicrometres = VF_OwnerVoxelsToMicrometres(
+            Slot.ResolvedPassageConfig.ReachMin);
+        Slot.PassageReachMaximumMicrometres = VF_OwnerVoxelsToMicrometres(
+            Slot.ResolvedPassageConfig.ReachMax);
+        Slot.PassageDistanceMinimumMicrometres = VF_OwnerVoxelsToMicrometres(
+            Slot.ResolvedPassageConfig.DistanceMin);
+        Slot.PassageDistanceMaximumMicrometres = VF_OwnerVoxelsToMicrometres(
+            Slot.ResolvedPassageConfig.DistanceMax);
+        Slot.PassageWanderMicrometres = VF_OwnerVoxelsToMicrometres(
+            Slot.ResolvedPassageConfig.Wander);
+        Slot.PassageVerticalWobbleMicrometres = VF_OwnerVoxelsToMicrometres(
+            Slot.ResolvedPassageConfig.VerticalWobble);
+        Slot.PassageSpiralRadiusMicrometres = VF_OwnerVoxelsToMicrometres(
+            Slot.ResolvedPassageConfig.SpiralRadius);
+        Slot.PassageCascadeLedgeMicrometres = VF_OwnerVoxelsToMicrometres(
+            Slot.ResolvedPassageConfig.CascadeLedge);
+        Slot.LegacyTopWorldZVoxels = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Slot.TopWorldMicrometres);
+        Slot.LegacyBottomWorldZVoxels = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Slot.BottomWorldMicrometres);
+        Slot.LegacyHeightVoxels = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Slot.HeightMicrometres);
 
         StrateLayout.Add(Slot);
 
@@ -1429,6 +1507,7 @@ bool UVoxelStrateManager::Initialize(UVoxelSettings* Settings, int32 WorldSeed)
     OriginSpineRadius = bUseSeason
         ? SeasonManifest.OriginSpineRadius : Settings->OriginSpineRadius;
     InterStrateGapChunks = LayoutGapChunks;
+    ResolvedInterStrateGapMicrometres = ResolvedGapMicrometres;
     if (bUseSeason)
     {
         ActiveSeasonContentHash = SeasonManifest.ContentHash;
@@ -1537,8 +1616,8 @@ bool UVoxelStrateManager::SetComposerOverrideForStrate(
     }
     VF_SetComposerRuntimeBounds(
         Override->Params,
-        (float)(TargetSlot->TopChunkZ + 1) * StrateLayoutChunkWidthVoxels,
-        (float)TargetSlot->BottomChunkZ * StrateLayoutChunkWidthVoxels);
+        TargetSlot->LegacyTopWorldZVoxels,
+        TargetSlot->LegacyBottomWorldZVoxels);
     Override->bUseRecipe = bUseRecipe;
     if (Recipe != nullptr)
     {
@@ -1557,8 +1636,8 @@ bool UVoxelStrateManager::SetComposerOverrideForStrate(
         Override->bUseRegions = true;
         Override->Regions = *InRegions;
         VF_RekeyStrateRegionManifest(Override->Regions, CandidateSeed, StrateIndex);
-        Override->Regions.StrateTopWorldZ = (float)(TargetSlot->TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-        Override->Regions.StrateBottomWorldZ = (float)TargetSlot->BottomChunkZ * StrateLayoutChunkWidthVoxels;
+        Override->Regions.StrateTopWorldZ = TargetSlot->LegacyTopWorldZVoxels;
+        Override->Regions.StrateBottomWorldZ = TargetSlot->LegacyBottomWorldZVoxels;
         VF_SetStrateArchetypeRuntimeBounds(Override->Params,
                                            Override->Regions.StrateTopWorldZ,
                                            Override->Regions.StrateBottomWorldZ);
@@ -1805,14 +1884,36 @@ void UVoxelStrateManager::GeneratePassages()
         // that opens the next room rather than a second vertical spine.
         const UVoxelStrateDefinition* UpperDef = Upper.Definition;
         if (!UpperDef) continue;
-        const FStratePassageConfig& Cfg = UpperDef->PassageConfig;
+        // GeneratePassages is the legacy owner-voxel route adapter. Its immutable source is the
+        // physical passage record resolved during Initialize, converted back to owner voxels here.
+        FStratePassageConfig Cfg = Upper.ResolvedPassageConfig;
+        Cfg.MouthRadius = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Upper.PassageMouthRadiusMicrometres);
+        Cfg.MidRadius = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Upper.PassageMidRadiusMicrometres);
+        Cfg.ReachMin = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Upper.PassageReachMinimumMicrometres);
+        Cfg.ReachMax = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Upper.PassageReachMaximumMicrometres);
+        Cfg.DistanceMin = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Upper.PassageDistanceMinimumMicrometres);
+        Cfg.DistanceMax = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Upper.PassageDistanceMaximumMicrometres);
+        Cfg.Wander = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Upper.PassageWanderMicrometres);
+        Cfg.VerticalWobble = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Upper.PassageVerticalWobbleMicrometres);
+        Cfg.SpiralRadius = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Upper.PassageSpiralRadiusMicrometres);
+        Cfg.CascadeLedge = VF_ResolvedWorldMicrometresToOwnerVoxels(
+            Upper.PassageCascadeLedgeMicrometres);
 
         // Upper strate floor and lower strate ceiling (differ when there's a bedrock gap).
-        const float UpperTopZ    = (float)(Upper.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-        const float UpperBottomZ = (float)(Upper.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
-        const float LowerTopZ    = (float)(Lower.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-        const float UpperMax = (float)Upper.HeightInChunks * StrateLayoutChunkWidthVoxels * 0.9f;
-        const float LowerMax = (float)Lower.HeightInChunks * StrateLayoutChunkWidthVoxels * 0.9f;
+        const float UpperTopZ = Upper.LegacyTopWorldZVoxels;
+        const float UpperBottomZ = Upper.LegacyBottomWorldZVoxels;
+        const float LowerTopZ = Lower.LegacyTopWorldZVoxels;
+        const float UpperMax = Upper.LegacyHeightVoxels * 0.9f;
+        const float LowerMax = Lower.LegacyHeightVoxels * 0.9f;
 
         const float DistLo = FMath::Min(Cfg.DistanceMin, Cfg.DistanceMax);
         const float DistHi = FMath::Max(Cfg.DistanceMin, Cfg.DistanceMax);
@@ -1942,7 +2043,7 @@ void UVoxelStrateManager::GeneratePassages()
                     LowerDef->FloatingIslandParams,
                     LowerQuerySeed,
                     LowerTopZ,
-                    (float)(Lower.BottomChunkZ) * StrateLayoutChunkWidthVoxels,
+                    Lower.LegacyBottomWorldZVoxels,
                     PX,
                     PY,
                     MaxLateralSnap,
@@ -2002,7 +2103,7 @@ void UVoxelStrateManager::GeneratePassages()
             if (bAimedLowerAtPlayerFitPoint)
             {
                 const float LowerSealThickness = BoundarySealThicknessFor(*LowerDef);
-                const float LowerBottomZ = (float)(Lower.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+                const float LowerBottomZ = Lower.LegacyBottomWorldZVoxels;
                 const float InnerBottomZ = LowerBottomZ + LowerSealThickness;
                 const float InnerTopZ = LowerTopZ - LowerSealThickness;
                 if (VoxelMath::IsFinite(SuggestedLowerPoint.X)
@@ -2170,7 +2271,7 @@ void UVoxelStrateManager::GeneratePassages()
                 Cfg.MouthRadius,
                 LowerDoorDirection,
                 LowerTopZ,
-                (float)(Lower.BottomChunkZ) * StrateLayoutChunkWidthVoxels,
+                Lower.LegacyBottomWorldZVoxels,
                 LowerDef ? BoundarySealThicknessFor(*LowerDef) : 0.0f,
                 bAimedLowerAtPlayerFitPoint);
             Passage.UpperPoint = Passage.UpperLanding.StandingPoint;
@@ -2595,8 +2696,8 @@ void UVoxelStrateManager::GeneratePassages()
     if (bOpenSurfaceEntry && OriginSpineRadius > 0.0f && StrateLayout.Num() > 0)
     {
         const FStrateSlot& Top = StrateLayout[0];
-        const float TopZ = (float)(Top.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-        const float BottomZ = (float)Top.BottomChunkZ * StrateLayoutChunkWidthVoxels;
+        const float TopZ = Top.LegacyTopWorldZVoxels;
+        const float BottomZ = Top.LegacyBottomWorldZVoxels;
         const float TopSeal = Top.Definition
             ? BoundarySealThicknessFor(*Top.Definition) : 0.0f;
         const VoxelPassageGeometry::FOriginLandingGeometry OriginLanding =
@@ -5921,8 +6022,8 @@ bool UVoxelStrateManager::AnyLandingFloorAtLattice(
         for (const FStrateSlot& Slot : StrateLayout)
         {
             if (Slot.Definition == nullptr) continue;
-            const float TopZ = (static_cast<float>(Slot.TopChunkZ) + 1.0f) * StrateLayoutChunkWidthVoxels;
-            const float BottomZ = static_cast<float>(Slot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+            const float TopZ = Slot.LegacyTopWorldZVoxels;
+            const float BottomZ = Slot.LegacyBottomWorldZVoxels;
             const float Seal = VF_BoundarySealThicknessForDefinition(*Slot.Definition);
             const VoxelPassageGeometry::FOriginLandingGeometry Geometry =
                 VoxelPassageGeometry::BuildOriginLandingGeometry(
@@ -5964,8 +6065,8 @@ bool UVoxelStrateManager::AnyOriginLandingNearBox(
     for (const FStrateSlot& Slot : StrateLayout)
     {
         if (Slot.Definition == nullptr) continue;
-        const float TopZ = (static_cast<float>(Slot.TopChunkZ) + 1.0f) * StrateLayoutChunkWidthVoxels;
-        const float BottomZ = static_cast<float>(Slot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+        const float TopZ = Slot.LegacyTopWorldZVoxels;
+        const float BottomZ = Slot.LegacyBottomWorldZVoxels;
         if (VoxelPassageGeometry::OriginLandingRoomTouchesBox(
                 VoxelBox, TopZ, BottomZ,
                 VF_BoundarySealThicknessForDefinition(*Slot.Definition),
@@ -5985,8 +6086,8 @@ bool UVoxelStrateManager::AnyOriginLandingFloorNearBox(
     for (const FStrateSlot& Slot : StrateLayout)
     {
         if (Slot.Definition == nullptr) continue;
-        const float TopZ = (static_cast<float>(Slot.TopChunkZ) + 1.0f) * StrateLayoutChunkWidthVoxels;
-        const float BottomZ = static_cast<float>(Slot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+        const float TopZ = Slot.LegacyTopWorldZVoxels;
+        const float BottomZ = Slot.LegacyBottomWorldZVoxels;
         if (VoxelPassageGeometry::OriginLandingFloorTouchesBox(
                 VoxelBox, TopZ, BottomZ,
                 VF_BoundarySealThicknessForDefinition(*Slot.Definition),
@@ -6010,8 +6111,8 @@ bool UVoxelStrateManager::AnyOriginLandingNearLattice(
     for (const FStrateSlot& Slot : StrateLayout)
     {
         if (Slot.Definition == nullptr) continue;
-        const float TopZ = (static_cast<float>(Slot.TopChunkZ) + 1.0f) * StrateLayoutChunkWidthVoxels;
-        const float BottomZ = static_cast<float>(Slot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+        const float TopZ = Slot.LegacyTopWorldZVoxels;
+        const float BottomZ = Slot.LegacyBottomWorldZVoxels;
         const float Seal = VF_BoundarySealThicknessForDefinition(*Slot.Definition);
         if (VoxelPassageGeometry::OriginLandingRoomTouchesLattice(
                 VoxelBox, LatticeOrigin, Step, TopZ, BottomZ, Seal, OriginSpineRadius,
@@ -6048,8 +6149,8 @@ bool UVoxelStrateManager::AnyOriginLandingAirNearLattice(
         {
             continue;
         }
-        const float TopZ = (static_cast<float>(Slot.TopChunkZ) + 1.0f) * StrateLayoutChunkWidthVoxels;
-        const float BottomZ = static_cast<float>(Slot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+        const float TopZ = Slot.LegacyTopWorldZVoxels;
+        const float BottomZ = Slot.LegacyBottomWorldZVoxels;
         const float Seal = VF_BoundarySealThicknessForDefinition(*Slot.Definition);
         const VoxelPassageGeometry::FOriginLandingGeometry Geometry =
             VoxelPassageGeometry::BuildOriginLandingGeometry(
@@ -6125,8 +6226,8 @@ bool UVoxelStrateManager::AnyOriginLandingFloorNearLattice(
     for (const FStrateSlot& Slot : StrateLayout)
     {
         if (Slot.Definition == nullptr) continue;
-        const float TopZ = (static_cast<float>(Slot.TopChunkZ) + 1.0f) * StrateLayoutChunkWidthVoxels;
-        const float BottomZ = static_cast<float>(Slot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+        const float TopZ = Slot.LegacyTopWorldZVoxels;
+        const float BottomZ = Slot.LegacyBottomWorldZVoxels;
         const float Seal = VF_BoundarySealThicknessForDefinition(*Slot.Definition);
         if (VoxelPassageGeometry::OriginLandingFloorTouchesLattice(
                 VoxelBox, LatticeOrigin, Step, TopZ, BottomZ, Seal, OriginSpineRadius))
@@ -6143,15 +6244,36 @@ bool UVoxelStrateManager::AnyOriginLandingFloorNearLattice(
 
 int32 UVoxelStrateManager::FindSlotIndexForChunkZ(int32 ChunkZ) const
 {
-    // Linear search through strate layout.
-    // With ~10-20 strates this is fine. If we ever have hundreds,
-    // switch to binary search (layout is sorted by Z).
-    for (int32 i = 0; i < StrateLayout.Num(); i++)
+    // Legacy chunk callers use the projected interval cached during Initialize. The source bounds
+    // are the slot's physical micrometre interval; these indices do not define or stack strates.
+    for (int32 i = 0; i < StrateLayout.Num(); ++i)
     {
         const FStrateSlot& Slot = StrateLayout[i];
-        if (ChunkZ <= Slot.TopChunkZ && ChunkZ >= Slot.BottomChunkZ)
+        if (ChunkZ <= Slot.TopChunkZ && ChunkZ >= Slot.BottomChunkZ) return i;
+    }
+    return -1;
+}
+
+int32 UVoxelStrateManager::FindSlotIndexForWorldZCentimetres(double WorldZCentimetres) const
+{
+    const double WorldZMicrometres = WorldZCentimetres * 10000.0;
+    int32 Low = 0;
+    int32 High = StrateLayout.Num() - 1;
+    while (Low <= High)
+    {
+        const int32 Mid = Low + (High - Low) / 2;
+        const FStrateSlot& Slot = StrateLayout[Mid];
+        if (WorldZMicrometres >= static_cast<double>(Slot.TopWorldMicrometres))
         {
-            return i;
+            High = Mid - 1;
+        }
+        else if (WorldZMicrometres < static_cast<double>(Slot.BottomWorldMicrometres))
+        {
+            Low = Mid + 1;
+        }
+        else
+        {
+            return Mid;
         }
     }
     return -1;
@@ -6159,9 +6281,8 @@ int32 UVoxelStrateManager::FindSlotIndexForChunkZ(int32 ChunkZ) const
 
 UVoxelStrateDefinition* UVoxelStrateManager::GetStrateAt(float WorldZ) const
 {
-    // Convert world Z to chunk Z coordinate
-    int32 ChunkZ = FMath::FloorToInt((WorldZ / VOXEL_SIZE) / StrateLayoutChunkWidthVoxels);
-    int32 SlotIdx = FindSlotIndexForChunkZ(ChunkZ);
+    if (!FMath::IsFinite(WorldZ)) return nullptr;
+    const int32 SlotIdx = FindSlotIndexForWorldZCentimetres(WorldZ);
     if (SlotIdx >= 0)
     {
         return StrateLayout[SlotIdx].Definition;
@@ -6171,8 +6292,8 @@ UVoxelStrateDefinition* UVoxelStrateManager::GetStrateAt(float WorldZ) const
 
 int32 UVoxelStrateManager::GetStrateIndex(float WorldZ) const
 {
-    int32 ChunkZ = FMath::FloorToInt((WorldZ / VOXEL_SIZE) / StrateLayoutChunkWidthVoxels);
-    int32 SlotIdx = FindSlotIndexForChunkZ(ChunkZ);
+    if (!FMath::IsFinite(WorldZ)) return -1;
+    const int32 SlotIdx = FindSlotIndexForWorldZCentimetres(WorldZ);
     if (SlotIdx >= 0)
     {
         return StrateLayout[SlotIdx].StrateIndex;
@@ -6285,9 +6406,13 @@ bool UVoxelStrateManager::IsGapChunk(const FIntVector& ChunkCoord) const
     if (StrateLayout.Num() == 0) return false;
 
     // Above the top strate or below the bottom strate = open air, NOT a gap.
-    const int32 StackTop    = StrateLayout[0].TopChunkZ;
-    const int32 StackBottom = StrateLayout.Last().BottomChunkZ;
-    if (ChunkCoord.Z > StackTop || ChunkCoord.Z < StackBottom) return false;
+    const int64 ChunkCenterMicrometres = static_cast<int64>(ChunkCoord.Z)
+        * StrateLayoutChunkSizeMicrometres + StrateLayoutChunkSizeMicrometres / 2;
+    if (ChunkCenterMicrometres >= StrateLayout[0].TopWorldMicrometres
+        || ChunkCenterMicrometres < StrateLayout.Last().BottomWorldMicrometres)
+    {
+        return false;
+    }
 
     // Inside the stack's Z span but not in any strate slot → it's a bedrock gap.
     return FindSlotIndexForChunkZ(ChunkCoord.Z) < 0;
@@ -6331,8 +6456,8 @@ FSlabGenerationParams UVoxelStrateManager::GetSlabParamsForChunk(const FIntVecto
     // Fill in the runtime Z bounds (voxel coordinates, same convention as
     // FStrateGenerationParams::StrateTopWorldZ / StrateBottomWorldZ).
     // TopChunkZ+1 because the top chunk's CEILING is at (TopChunkZ+1)*StrateLayoutChunkWidthVoxels.
-    Result.StrateTopWorldZ    = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-    Result.StrateBottomWorldZ = (float)(Slot.BottomChunkZ)  * StrateLayoutChunkWidthVoxels;
+    Result.StrateTopWorldZ    = Slot.LegacyTopWorldZVoxels;
+    Result.StrateBottomWorldZ = Slot.LegacyBottomWorldZVoxels;
 
     return Result;
 }
@@ -6365,8 +6490,8 @@ FMazeGenerationParams UVoxelStrateManager::GetMazeParamsForChunk(const FIntVecto
         }
     }
 #endif
-    Result.StrateTopWorldZ = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-    Result.StrateBottomWorldZ = (float)Slot.BottomChunkZ * StrateLayoutChunkWidthVoxels;
+    Result.StrateTopWorldZ = Slot.LegacyTopWorldZVoxels;
+    Result.StrateBottomWorldZ = Slot.LegacyBottomWorldZVoxels;
     return Result;
 }
 
@@ -6392,8 +6517,8 @@ FSurfaceGenerationParams UVoxelStrateManager::GetSurfaceParamsForChunk(const FIn
         }
     }
 #endif
-    Result.StrateTopWorldZ = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-    Result.StrateBottomWorldZ = (float)Slot.BottomChunkZ * StrateLayoutChunkWidthVoxels;
+    Result.StrateTopWorldZ = Slot.LegacyTopWorldZVoxels;
+    Result.StrateBottomWorldZ = Slot.LegacyBottomWorldZVoxels;
     return Result;
 }
 
@@ -6419,8 +6544,8 @@ FVerticalShaftParams UVoxelStrateManager::GetVerticalShaftParamsForChunk(const F
         }
     }
 #endif
-    Result.StrateTopWorldZ = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-    Result.StrateBottomWorldZ = (float)Slot.BottomChunkZ * StrateLayoutChunkWidthVoxels;
+    Result.StrateTopWorldZ = Slot.LegacyTopWorldZVoxels;
+    Result.StrateBottomWorldZ = Slot.LegacyBottomWorldZVoxels;
     return Result;
 }
 
@@ -6446,8 +6571,8 @@ FFloatingIslandParams UVoxelStrateManager::GetFloatingIslandParamsForChunk(const
         }
     }
 #endif
-    Result.StrateTopWorldZ = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-    Result.StrateBottomWorldZ = (float)Slot.BottomChunkZ * StrateLayoutChunkWidthVoxels;
+    Result.StrateTopWorldZ = Slot.LegacyTopWorldZVoxels;
+    Result.StrateBottomWorldZ = Slot.LegacyBottomWorldZVoxels;
     return Result;
 }
 
@@ -6481,14 +6606,14 @@ FBiomeContext UVoxelStrateManager::GetBiomeContextForChunk(const FIntVector& Chu
 
 bool UVoxelStrateManager::GetStrateUnrealZRange(float WorldZ, float& OutTopZ, float& OutBottomZ) const
 {
-    const int32 ChunkZ = FMath::FloorToInt((WorldZ / VOXEL_SIZE) / StrateLayoutChunkWidthVoxels);
-    const int32 SlotIdx = FindSlotIndexForChunkZ(ChunkZ);
+    if (!FMath::IsFinite(WorldZ)) return false;
+    const int32 SlotIdx = FindSlotIndexForWorldZCentimetres(WorldZ);
     if (SlotIdx < 0) return false;
 
     const FStrateSlot& Slot = StrateLayout[SlotIdx];
-    // Voxel-space Z bounds → Unreal units. Ceiling = top chunk's upper edge.
-    OutTopZ    = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels * VOXEL_SIZE;
-    OutBottomZ = (float)(Slot.BottomChunkZ)  * StrateLayoutChunkWidthVoxels * VOXEL_SIZE;
+    // Return the resolved physical bounds in Unreal centimeters.
+    OutTopZ    = static_cast<float>(static_cast<double>(Slot.TopWorldMicrometres) / 10000.0);
+    OutBottomZ = static_cast<float>(static_cast<double>(Slot.BottomWorldMicrometres) / 10000.0);
     return true;
 }
 
@@ -6501,8 +6626,8 @@ FStrateDisturbanceParams UVoxelStrateManager::GetDisturbanceParamsForChunk(const
     }
     const FStrateSlot& Slot = StrateLayout[SlotIdx];
     FStrateDisturbanceParams Result = Slot.Definition->Disturbances;
-    Result.StrateTopWorldZ    = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-    Result.StrateBottomWorldZ = (float)(Slot.BottomChunkZ)  * StrateLayoutChunkWidthVoxels;
+    Result.StrateTopWorldZ    = Slot.LegacyTopWorldZVoxels;
+    Result.StrateBottomWorldZ = Slot.LegacyBottomWorldZVoxels;
     return Result;
 }
 
@@ -6534,8 +6659,8 @@ float UVoxelStrateManager::GetWaterLevelWorldZForChunk(const FIntVector& ChunkCo
     }
     if (Rel <= 0.0f) return -FLT_MAX;
 
-    const float BottomZ = (float)(Slot.BottomChunkZ)  * StrateLayoutChunkWidthVoxels;
-    const float TopZ    = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
+    const float BottomZ = Slot.LegacyBottomWorldZVoxels;
+    const float TopZ    = Slot.LegacyTopWorldZVoxels;
     return FMath::Lerp(BottomZ, TopZ, FMath::Clamp(Rel, 0.0f, 1.0f));
 }
 
@@ -6579,8 +6704,8 @@ FStrateGenerationParams UVoxelStrateManager::GetGenerationParams(const FIntVecto
         FindComposerOverride(Slot.StrateIndex))
     {
         FStrateGenerationParams Result = Override->Params.TunnelNetworkParams;
-        Result.StrateTopWorldZ = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-        Result.StrateBottomWorldZ = (float)Slot.BottomChunkZ * StrateLayoutChunkWidthVoxels;
+        Result.StrateTopWorldZ = Slot.LegacyTopWorldZVoxels;
+        Result.StrateBottomWorldZ = Slot.LegacyBottomWorldZVoxels;
         // A candidate is a hard replacement of this slot. Do not blend its rolled vector with an
         // authored neighbour at a boundary; this is also how the offline fixture measures it.
         return ResolveFinalParams(Result);
@@ -6590,8 +6715,8 @@ FStrateGenerationParams UVoxelStrateManager::GetGenerationParams(const FIntVecto
     if (SeasonStrates.IsValidIndex(SlotIdx))
     {
         FStrateGenerationParams Result = SeasonStrates[SlotIdx].Params.TunnelNetworkParams;
-        Result.StrateTopWorldZ = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-        Result.StrateBottomWorldZ = (float)Slot.BottomChunkZ * StrateLayoutChunkWidthVoxels;
+        Result.StrateTopWorldZ = Slot.LegacyTopWorldZVoxels;
+        Result.StrateBottomWorldZ = Slot.LegacyBottomWorldZVoxels;
         // Season vectors are already final, measured slot records. Vertical structural posts own
         // their boundary; blending them with another selected recipe would describe neither one.
         return ResolveFinalParams(Result);
@@ -6608,8 +6733,8 @@ FStrateGenerationParams UVoxelStrateManager::GetGenerationParams(const FIntVecto
     //
     // TopChunkZ=0, CHUNK_SIZE=32: top of the strate = chunk 0's top edge = voxel Z=32
     // BottomChunkZ=-3: bottom of the strate = chunk -3's bottom edge = voxel Z=-3*32 = -96
-    BaseParams.StrateTopWorldZ = (float)(Slot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-    BaseParams.StrateBottomWorldZ = (float)(Slot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+    BaseParams.StrateTopWorldZ = Slot.LegacyTopWorldZVoxels;
+    BaseParams.StrateBottomWorldZ = Slot.LegacyBottomWorldZVoxels;
 
     // Core currently dispatches one generator field per resolved strate. Gradient and
     // interleaved metadata therefore use the explicitly declared Hard fallback for every
@@ -6656,18 +6781,23 @@ FStrateGenerationParams UVoxelStrateManager::GetGenerationParams(const FIntVecto
     //---------------------------------------------------------------------
     // CHECK BOTTOM BOUNDARY (transitioning to strate below)
     //---------------------------------------------------------------------
-    // DistFromBottom = how many chunks above the bottom edge of this strate.
+    // Legacy chunk callers project their sample to a layout interval; physical distance and
+    // transition width are both resolved in micrometres before projecting the blend fraction.
     // When 0, we're right at the boundary. When == TransitionBlendChunks, we're at
     // the outer edge of the transition zone.
-    int32 DistFromBottom = ChunkCoord.Z - Slot.BottomChunkZ;
+    const int64 DistFromBottomMicrometres = static_cast<int64>(ChunkCoord.Z)
+        * StrateLayoutChunkSizeMicrometres - Slot.BottomWorldMicrometres;
+    const int32 DistFromBottom = static_cast<int32>(VF_FloorDivide64(
+        DistFromBottomMicrometres, StrateLayoutChunkSizeMicrometres));
 
     if (SlotIdx + 1 < StrateLayout.Num())
     {
         // The upper strate (this one) controls the transition type at its lower edge
-        const EVoxelStrateTransition TransType = Slot.Definition->TransitionType;
+        const EVoxelStrateTransition TransType = Slot.ResolvedTransitionType;
 
         // Per-definition blend distance.
-        const int32 EffectiveBlend = Slot.Definition->TransitionBlendChunks;
+        const int32 EffectiveBlend = static_cast<int32>(VF_FloorDivide64(
+            Slot.TransitionWidthMicrometres, StrateLayoutChunkSizeMicrometres));
 
         // Prepare the neighbor's params (only used for Gradient and Interleaved)
         const FStrateSlot& BelowSlot = StrateLayout[SlotIdx + 1];
@@ -6691,8 +6821,8 @@ FStrateGenerationParams UVoxelStrateManager::GetGenerationParams(const FIntVecto
             if (EffectiveBlend > 0 && DistFromBottom < EffectiveBlend)
             {
                 FStrateGenerationParams BelowParams = BuildParamsFromDefinition(BelowSlot.Definition);
-                BelowParams.StrateTopWorldZ = (float)(BelowSlot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-                BelowParams.StrateBottomWorldZ = (float)(BelowSlot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+                BelowParams.StrateTopWorldZ = BelowSlot.LegacyTopWorldZVoxels;
+                BelowParams.StrateBottomWorldZ = BelowSlot.LegacyBottomWorldZVoxels;
 
                 // Linear alpha: 0 at EffectiveBlend chunks away, 1 at the boundary
                 float Alpha = 1.0f - ((float)DistFromBottom / (float)EffectiveBlend);
@@ -6729,8 +6859,8 @@ FStrateGenerationParams UVoxelStrateManager::GetGenerationParams(const FIntVecto
             if (DistFromBottom < CheckRange)
             {
                 FStrateGenerationParams BelowParams = BuildParamsFromDefinition(BelowSlot.Definition);
-                BelowParams.StrateTopWorldZ = (float)(BelowSlot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-                BelowParams.StrateBottomWorldZ = (float)(BelowSlot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+                BelowParams.StrateTopWorldZ = BelowSlot.LegacyTopWorldZVoxels;
+                BelowParams.StrateBottomWorldZ = BelowSlot.LegacyBottomWorldZVoxels;
 
                 // Sample 3D Perlin noise to warp the boundary position.
                 // XY frequency 0.15 gives medium-scale variation (~6-7 chunks per cycle).
@@ -6768,14 +6898,18 @@ FStrateGenerationParams UVoxelStrateManager::GetGenerationParams(const FIntVecto
     //---------------------------------------------------------------------
     // Mirror logic: the ABOVE strate's TransitionType controls its lower edge,
     // which is this strate's upper edge. So we read from StrateLayout[SlotIdx-1].
-    int32 DistFromTop = Slot.TopChunkZ - ChunkCoord.Z;
+    const int64 DistFromTopMicrometres = Slot.TopWorldMicrometres
+        - (static_cast<int64>(ChunkCoord.Z) + 1) * StrateLayoutChunkSizeMicrometres;
+    const int32 DistFromTop = static_cast<int32>(VF_FloorDivide64(
+        DistFromTopMicrometres, StrateLayoutChunkSizeMicrometres));
 
     if (SlotIdx > 0)
     {
         // The strate ABOVE controls the transition at its lower edge (= our upper edge)
         const FStrateSlot& AboveSlot = StrateLayout[SlotIdx - 1];
-        const EVoxelStrateTransition TransType = AboveSlot.Definition->TransitionType;
-        const int32 EffectiveBlend = AboveSlot.Definition->TransitionBlendChunks;
+        const EVoxelStrateTransition TransType = AboveSlot.ResolvedTransitionType;
+        const int32 EffectiveBlend = static_cast<int32>(VF_FloorDivide64(
+            AboveSlot.TransitionWidthMicrometres, StrateLayoutChunkSizeMicrometres));
 
         switch (TransType)
         {
@@ -6790,8 +6924,8 @@ FStrateGenerationParams UVoxelStrateManager::GetGenerationParams(const FIntVecto
             if (EffectiveBlend > 0 && DistFromTop < EffectiveBlend)
             {
                 FStrateGenerationParams AboveParams = BuildParamsFromDefinition(AboveSlot.Definition);
-                AboveParams.StrateTopWorldZ = (float)(AboveSlot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-                AboveParams.StrateBottomWorldZ = (float)(AboveSlot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+                AboveParams.StrateTopWorldZ = AboveSlot.LegacyTopWorldZVoxels;
+                AboveParams.StrateBottomWorldZ = AboveSlot.LegacyBottomWorldZVoxels;
 
                 float Alpha = 1.0f - ((float)DistFromTop / (float)EffectiveBlend);
                 Alpha = FMath::Clamp(Alpha, 0.0f, 1.0f);
@@ -6812,8 +6946,8 @@ FStrateGenerationParams UVoxelStrateManager::GetGenerationParams(const FIntVecto
             if (DistFromTop < CheckRange)
             {
                 FStrateGenerationParams AboveParams = BuildParamsFromDefinition(AboveSlot.Definition);
-                AboveParams.StrateTopWorldZ = (float)(AboveSlot.TopChunkZ + 1) * StrateLayoutChunkWidthVoxels;
-                AboveParams.StrateBottomWorldZ = (float)(AboveSlot.BottomChunkZ) * StrateLayoutChunkWidthVoxels;
+                AboveParams.StrateTopWorldZ = AboveSlot.LegacyTopWorldZVoxels;
+                AboveParams.StrateBottomWorldZ = AboveSlot.LegacyBottomWorldZVoxels;
 
                 // Same noise function but with a different seed offset to avoid
                 // symmetry between top and bottom boundaries of adjacent strates

Source/VoxelForge/Private/VoxelWorld.cpp

@@ -82,6 +82,17 @@
 #include <atomic>
 #include <unordered_set>
 
+static FORCEINLINE int32 VF_ClipLevelScale(int32 Level)
+{
+    const uint32 SafeLevel = static_cast<uint32>(FMath::Clamp(Level, 0, 8));
+    return static_cast<int32>(uint32{1} << SafeLevel);
+}
+static FORCEINLINE int32 VF_ClipLevelExtentVoxels(int32 Level)
+{
+    return static_cast<int32>(static_cast<uint32>(CHUNK_SIZE)
+        * static_cast<uint32>(VF_ClipLevelScale(Level)));
+}
+
 static bool VF_TileOverlapsVoxelBounds(const FVoxelTileKey& Tile,
                                        const FVector& BoundsMin, const FVector& BoundsMax);
 static bool VF_TileFootprintsOverlap(const FVoxelTileKey& A, const FVoxelTileKey& B);
@@ -227,11 +238,11 @@ namespace
         GVoxelForgeStreamingResultBacklogCap,
         TEXT("Maximum queued results plus admitted tile tasks; 0 disables the safety cap. This is separate from the worker-slot cap."));
 
-    int32 GVoxelForgeStreamingReadyQueueDepth = 8;
+    int32 GVoxelForgeStreamingReadyQueueDepth = 16;
     FAutoConsoleVariableRef CVarVoxelForgeStreamingReadyQueueDepth(
         TEXT("voxel.StreamingReadyQueueDepth"),
         GVoxelForgeStreamingReadyQueueDepth,
-        TEXT("Extra admitted tile tasks kept ready beyond the worker slots, up to one worker-set; 0 disables the refill queue."));
+        TEXT("Extra admitted tile tasks kept ready beyond worker slots, up to four worker-sets/64 tasks; 0 disables the refill queue."));
 
     int32 GVoxelForgeStreamingBackgroundWorkerCap = 1;
     FAutoConsoleVariableRef CVarVoxelForgeStreamingBackgroundWorkerCap(
@@ -301,8 +312,8 @@ namespace
     FAutoConsoleVariableRef CVarVoxelForgeStreamingStartupApplyBoost(
         TEXT("voxel.StreamingStartupApplyBoost"),
         GVoxelForgeStreamingStartupApplyBoost,
-        TEXT("Bounded cold-view upload budget (default on): 1 allows a 14 ms / 12-mesh budget until the initial desired set and walkable ring are ready; 0 uses the authored per-frame budget."));
-    constexpr int32 StreamingStartupMaxMeshApplies = 12;
+        TEXT("Bounded cold-view upload budget (default on): 1 allows a 14 ms / 24-mesh cap until the initial desired set and walkable ring are ready; 0 uses the authored per-frame budget."));
+    constexpr int32 StreamingStartupMaxMeshApplies = 24;
     constexpr float StreamingStartupApplyBudgetMilliseconds = 14.0f;
     constexpr double StreamingStartupApplyMaxSeconds = 30.0;
 
@@ -2196,7 +2207,7 @@ void AVoxelWorld::BeginPlay()
                       CommandLineStreamingReadyQueueDepth))
     {
         GVoxelForgeStreamingReadyQueueDepth = FMath::Clamp(
-            CommandLineStreamingReadyQueueDepth, 0, 32);
+            CommandLineStreamingReadyQueueDepth, 0, 64);
     }
     if (FParse::Value(FCommandLine::Get(), TEXT("voxel.StreamingBackgroundWorkerCap="),
                       CommandLineStreamingBackgroundWorkerCap))
@@ -2623,7 +2634,8 @@ void AVoxelWorld::BeginPlay()
         FTaskGraphInterface& TaskGraph = FTaskGraphInterface::Get();
         LowLevelTasks::FScheduler& TaskScheduler = LowLevelTasks::FScheduler::Get();
         const int32 QueueDepth = FMath::Clamp(
-            GVoxelForgeStreamingReadyQueueDepth, 0, GetMaxConcurrentStreamingTasks());
+            GVoxelForgeStreamingReadyQueueDepth, 0,
+            FMath::Min(64, FMath::Max(1, GetMaxConcurrentStreamingTasks()) * 4));
         VoxelForgeStartupTrace::RecordEvent(TEXT("worker_backend_config"), FString::Printf(
             TEXT("\"logical_cores\":%d,\"effective_tile_slots\":%d,"
                  "\"task_api\":\"UE::Tasks::Launch\",\"task_scheduler_workers\":%u,"
@@ -6240,17 +6252,19 @@ static void VF_AppendTouchingAncestors(
     const FVoxelTileKey& Tile, int32 AncestorLevel, CandidateArray& OutCandidates)
 {
     if (AncestorLevel <= Tile.Level) { return; }
-    const int32 Divisor = 1 << (AncestorLevel - Tile.Level);
-    const auto FloorDiv = [Divisor](int32 Value)
+    const int32 Divisor = VF_ClipLevelScale(AncestorLevel - Tile.Level);
+    const auto FloorDiv = [Divisor](int64 Value)
     {
-        return Value >= 0 ? Value / Divisor : -(((-Value) + Divisor - 1) / Divisor);
+        const int64 Quotient = Value / Divisor;
+        const int64 Remainder = Value % Divisor;
+        return static_cast<int32>(Remainder < 0 ? Quotient - 1 : Quotient);
     };
     const auto AxisCandidates = [&FloorDiv, Divisor](int32 Value)
     {
         TArray<int32, TInlineAllocator<2>> Candidates;
         int32 First = FloorDiv(Value);
         if ((Value % Divisor) == 0) { --First; }
-        const int32 Last = FloorDiv(Value + 1);
+        const int32 Last = FloorDiv(static_cast<int64>(Value) + 1);
         for (int32 Coord = First; Coord <= Last; ++Coord) { Candidates.Add(Coord); }
         return Candidates;
     };
@@ -6338,7 +6352,7 @@ void AVoxelWorld::UpdateVisualStalenessAudit()
             const FVector& WorldPosition, int32 Level, auto& OutCandidates)
         {
             const FVector LocalVoxel = WorldToLocalVoxel(WorldPosition);
-            const float TileExtentVoxels = static_cast<float>(CHUNK_SIZE * (1 << Level));
+            const float TileExtentVoxels = static_cast<float>(VF_ClipLevelExtentVoxels(Level));
             TArray<int32, TInlineAllocator<2>> XCandidates;
             TArray<int32, TInlineAllocator<2>> YCandidates;
             TArray<int32, TInlineAllocator<2>> ZCandidates;
@@ -7182,7 +7196,7 @@ void AVoxelWorld::Tick(float DeltaTime)
         {
             const FIntVector Min = SteadyLevelMins.FindChecked(Level);
             const FIntVector Max = SteadyLevelMaxs.FindChecked(Level);
-            const int32 ExtentVoxels = CHUNK_SIZE << Level;
+            const int32 ExtentVoxels = VF_ClipLevelExtentVoxels(Level);
             const double TileExtentMetres = static_cast<double>(ExtentVoxels) * VOXEL_SIZE / 100.0;
             const double SpanX = static_cast<double>(Max.X - Min.X + 1) * TileExtentMetres;
             const double SpanY = static_cast<double>(Max.Y - Min.Y + 1) * TileExtentMetres;
@@ -7554,6 +7568,14 @@ bool AVoxelWorld::GetVoxelForgeCoreWorldAssembly(
     return bUseVoxelForgeCore && !OutCanonicalJson.IsEmpty() && !OutContentHash.IsEmpty();
 }
 
+bool AVoxelWorld::GetVoxelForgeCoreResolvedLayout(
+    FString& OutCanonicalJson, FString& OutStableIdentity) const
+{
+    OutCanonicalJson = VoxelForgeCoreResolvedLayoutJson;
+    OutStableIdentity = VoxelForgeCoreResolvedLayoutIdentity;
+    return bUseVoxelForgeCore && !OutCanonicalJson.IsEmpty() && !OutStableIdentity.IsEmpty();
+}
+
 bool AVoxelWorld::QueryVoxelForgeCoreDensityAt(FVector WorldLocation, float& OutDensity) const
 {
     OutDensity = 0.0f;
@@ -7572,6 +7594,8 @@ bool AVoxelWorld::InitializeVoxelForgeCoreWorld(FString& OutFailureReason)
     OutFailureReason.Reset();
     VoxelForgeCoreWorldAssemblyJson.Reset();
     VoxelForgeCoreWorldAssemblyHash.Reset();
+    VoxelForgeCoreResolvedLayoutJson.Reset();
+    VoxelForgeCoreResolvedLayoutIdentity.Reset();
     if (!bUseVoxelForgeCore) return true;
     if (!Settings || !StrateManager)
     {
@@ -7604,6 +7628,17 @@ bool AVoxelWorld::InitializeVoxelForgeCoreWorld(FString& OutFailureReason)
         UE_LOG(LogTemp, Error, TEXT("[VoxelForgeCoreRuntime] %s"), *OutFailureReason);
         return false;
     }
+    if (const VoxelForgeCore::ResolvedLayoutSnapshotV3* ResolvedLayout = Snapshot->resolvedLayout())
+    {
+        const std::string CanonicalLayout = ResolvedLayout->ToJson();
+        if (CanonicalLayout.empty())
+        {
+            OutFailureReason = TEXT("the resolved Core layout could not be serialized canonically.");
+            return false;
+        }
+        VoxelForgeCoreResolvedLayoutJson = UTF8_TO_TCHAR(CanonicalLayout.c_str());
+        VoxelForgeCoreResolvedLayoutIdentity = UTF8_TO_TCHAR(ResolvedLayout->stableIdentity.c_str());
+    }
     if (const VoxelForgeCore::WorldAssemblyManifest* Assembly = Snapshot->worldAssembly())
     {
         const std::string CanonicalAssembly = Assembly->ToJson();
@@ -7663,10 +7698,20 @@ bool AVoxelWorld::InitializeVoxelForgeCoreWorld(FString& OutFailureReason)
     };
     for (const VoxelForgeCore::TileKey& Key : InitialDesired)
     {
-        const int32 Extent = 32 << Key.lod;
-        const int32 OriginX = Key.coordinate.x * Extent;
-        const int32 OriginY = Key.coordinate.y * Extent;
-        const int32 OriginZ = Key.coordinate.z * Extent;
+        const int32 Extent = VF_ClipLevelExtentVoxels(Key.lod);
+        const int64 OriginXWide = static_cast<int64>(Key.coordinate.x) * Extent;
+        const int64 OriginYWide = static_cast<int64>(Key.coordinate.y) * Extent;
+        const int64 OriginZWide = static_cast<int64>(Key.coordinate.z) * Extent;
+        if (OriginXWide < MIN_int32 || OriginYWide < MIN_int32 || OriginZWide < MIN_int32
+            || OriginXWide + Extent > MAX_int32 || OriginYWide + Extent > MAX_int32
+            || OriginZWide + Extent > MAX_int32)
+        {
+            OutFailureReason = TEXT("Core initial clipmap exceeds the supported voxel-coordinate range.");
+            return false;
+        }
+        const int32 OriginX = static_cast<int32>(OriginXWide);
+        const int32 OriginY = static_cast<int32>(OriginYWide);
+        const int32 OriginZ = static_cast<int32>(OriginZWide);
         IncludeExtent(ClipMin.x, ClipMax.x, OriginX, Extent);
         IncludeExtent(ClipMin.y, ClipMax.y, OriginY, Extent);
         IncludeExtent(ClipMin.z, ClipMax.z, OriginZ, Extent);
@@ -7770,7 +7815,15 @@ void AVoxelWorld::FallBackToLegacyAfterCoreInitializationFailure(const FString&
     }
     VoxelForgeCoreWorldAssemblyJson.Reset();
     VoxelForgeCoreWorldAssemblyHash.Reset();
+    VoxelForgeCoreResolvedLayoutJson.Reset();
+    VoxelForgeCoreResolvedLayoutIdentity.Reset();
     bUseVoxelForgeCore = false;
+    // The Core adapter sets this before validation; legacy generation must not inherit it.
+    // L'adaptateur Core l'active avant validation ; le générateur historique ne doit pas en hériter.
+    if (StrateManager != nullptr)
+    {
+        StrateManager->SetHardTransitionFallbackForAssembly(false);
+    }
     CoreFallbackCenterLocalCm = FVector::ZeroVector;
     if (Mesher != nullptr)
     {
@@ -9908,6 +9961,9 @@ bool AVoxelWorld::ApplyTileResult(FChunkResult& Result)
                 Sample.QueueWaitSeconds = WorkerQueueSeconds + ResultQueueSeconds;
                 Sample.WorkerTaskSeconds = WorkerTaskSeconds;
                 Sample.GenerationSeconds = GenerationSeconds;
+                Sample.CoreGenerateSeconds = Result.CoreGenerateSeconds;
+                Sample.MeshCopySeconds = Result.MeshCopySeconds;
+                Sample.StreamBuildSeconds = Result.StreamBuildSeconds;
                 Sample.ClassifySeconds = Result.ClassifySeconds;
                 Sample.MeshSeconds = Result.MeshSeconds;
                 Sample.StreamSeconds = Result.StreamSeconds;
@@ -10068,8 +10124,11 @@ void AVoxelWorld::SyncRemeshTile(const FVoxelTileKey& Tile)
     {
         BandChunkLo = MeshBandChunkLo;
         BandChunkHi = MeshBandChunkHi;
-        BandVoxLo   = MeshBandChunkLo * CHUNK_SIZE;
-        BandVoxHi   = (MeshBandChunkHi + 1) * CHUNK_SIZE - 1;
+        BandVoxLo = static_cast<int32>(FMath::Clamp<int64>(
+            static_cast<int64>(MeshBandChunkLo) * CHUNK_SIZE, MIN_int32, MAX_int32));
+        BandVoxHi = static_cast<int32>(FMath::Clamp<int64>(
+            (static_cast<int64>(MeshBandChunkHi) + 1) * CHUNK_SIZE - 1,
+            MIN_int32, MAX_int32));
     }
 
     FChunkResult Result;
@@ -10232,7 +10291,7 @@ void AVoxelWorld::ReconcileReadyTransitionVisibility()
     ReadyToHide.Reserve(TileComponents.Num());
     auto GetAncestorAtLevel = [](const FVoxelTileKey& Tile, int32 AncestorLevel)
     {
-        const int32 Divisor = 1 << (AncestorLevel - Tile.Level);
+        const int32 Divisor = VF_ClipLevelScale(AncestorLevel - Tile.Level);
         return FVoxelTileKey(VoxelClipmapDesiredTiles::FloorDiv(Tile.Coord, Divisor), AncestorLevel);
     };
     for (const TPair<FVoxelTileKey, URealtimeMeshComponent*>& Pair : TileComponents)
@@ -10355,7 +10414,10 @@ void AVoxelWorld::ReconcileReadyTransitionVisibility()
 // Integer floor-division (correct for negatives), scalar + vector.
 static FORCEINLINE int32 VF_FloorDiv(int32 V, int32 D)
 {
-    return V >= 0 ? (V / D) : -(((-V) + D - 1) / D);
+    if (D <= 0) { return 0; }
+    const int32 Quotient = V / D;
+    const int32 Remainder = V % D;
+    return Remainder < 0 ? Quotient - 1 : Quotient;
 }
 static FORCEINLINE FIntVector VF_FloorDiv(const FIntVector& V, int32 D)
 {
@@ -11435,13 +11497,13 @@ bool AVoxelWorld::IsTileInClipRange(const FVoxelTileKey& Tile, const FIntVector&
     {
         VF_OuterShell(Settings, R, MaxLevelBase, MaxLevel, ROuter);
     }
-    const int32 PowMax   = 1 << MaxLevel;
+    const int32 PowMax   = VF_ClipLevelScale(MaxLevel);
     const FIntVector CMax = VF_FloorDiv(Center, PowMax);
 
     FVector CV;
     if (bUseVoxelForgeCore)
     {
-        const double TileExtentVoxels = static_cast<double>(CHUNK_SIZE << Tile.Level);
+        const double TileExtentVoxels = static_cast<double>(VF_ClipLevelExtentVoxels(Tile.Level));
         CV = FVector(
             (static_cast<double>(Tile.Coord.X) + 0.5) * TileExtentVoxels,
             (static_cast<double>(Tile.Coord.Y) + 0.5) * TileExtentVoxels,
@@ -11457,9 +11519,9 @@ bool AVoxelWorld::IsTileInClipRange(const FVoxelTileKey& Tile, const FIntVector&
         VF_FloorDiv(FMath::FloorToInt(CV.Y), SizeMax),
         VF_FloorDiv(FMath::FloorToInt(CV.Z), SizeMax));
 
-    return FMath::Abs(TMax.X - CMax.X) <= ROuter
-        && FMath::Abs(TMax.Y - CMax.Y) <= ROuter
-        && FMath::Abs(TMax.Z - CMax.Z) <= ROuter;
+    return FMath::Abs(static_cast<int64>(TMax.X) - CMax.X) <= ROuter
+        && FMath::Abs(static_cast<int64>(TMax.Y) - CMax.Y) <= ROuter
+        && FMath::Abs(static_cast<int64>(TMax.Z) - CMax.Z) <= ROuter;
 }
 
 int32 AVoxelWorld::GetMaxConcurrentTasks() const
@@ -11812,11 +11874,10 @@ void AVoxelWorld::UpdateChunksAroundPosition(const FVector& CenterPosition, APaw
         }
     }
     const int32 MaxTasks = GetMaxConcurrentStreamingTasks();
-    // Keep at most one worker-set of ready work so an admission pass can feed idle slots
-    // without letting far work consume the near reserve. / Garder une file d'un ensemble
-    // de workers pour nourrir les slots sans consommer la reserve proche.
+    // Keep several bounded worker-sets ready so frame-paced admission can feed the
+    // background lane continuously without moving mesh application onto the game thread.
     const int32 ReadyQueueDepth = FMath::Clamp(
-        GVoxelForgeStreamingReadyQueueDepth, 0, MaxTasks);
+        GVoxelForgeStreamingReadyQueueDepth, 0, FMath::Min(64, FMath::Max(1, MaxTasks) * 4));
     const int32 TotalAdmissionCap = MaxTasks + ReadyQueueDepth;
     const int32 AuthoredNearTaskReserve = GetNearTaskReserve(MaxTasks);
     const FIntVector CenterChunk = GetTileCoordAtLocalCm(WorldToLocalCm(CenterPosition));
@@ -12052,7 +12113,7 @@ void AVoxelWorld::UpdateChunksAroundPosition(const FVector& CenterPosition, APaw
                 LevelSummaries.Num(), Leavers.Num(), CollisionOnlyTiles.Num()));
             for (const FDesiredLevelSummary& Summary : LevelSummaries)
             {
-                const int32 ExtentVoxels = CHUNK_SIZE << Summary.Level;
+                const int32 ExtentVoxels = VF_ClipLevelExtentVoxels(Summary.Level);
                 const double TileExtentMetres = static_cast<double>(ExtentVoxels) * VOXEL_SIZE / 100.0;
                 const double SpanX = static_cast<double>(Summary.Max.X - Summary.Min.X + 1) * TileExtentMetres;
                 const double SpanY = static_cast<double>(Summary.Max.Y - Summary.Min.Y + 1) * TileExtentMetres;
@@ -12103,8 +12164,9 @@ void AVoxelWorld::UpdateChunksAroundPosition(const FVector& CenterPosition, APaw
                 for (const FVoxelTileKey& T : LoadedTiles)
                 {
                     if (T.Level < CutMin) continue;
-                    const int32 CLo = T.Coord.Z << T.Level;
-                    const int32 CHi = ((T.Coord.Z + 1) << T.Level) - 1;
+                    const int64 LevelScale = VF_ClipLevelScale(T.Level);
+                    const int64 CLo = static_cast<int64>(T.Coord.Z) * LevelScale;
+                    const int64 CHi = (static_cast<int64>(T.Coord.Z) + 1) * LevelScale - 1;
                     const bool bInOld  = CLo >= MeshBandChunkLo && CHi <= MeshBandChunkHi;
                     const bool bInNew  = CLo >= NewLo && CHi <= NewHi;
                     const bool bOutOld = CHi < MeshBandChunkLo || CLo > MeshBandChunkHi;
@@ -12324,7 +12386,7 @@ void AVoxelWorld::UpdateChunksAroundPosition(const FVector& CenterPosition, APaw
                 }
                 Heading = Heading.GetSafeNormal();
                 const FVector PlayerLocalCm = WorldToLocalCm(CenterPosition);
-                const double TileSizeCm = static_cast<double>(CHUNK_SIZE << Level)
+                const double TileSizeCm = static_cast<double>(VF_ClipLevelExtentVoxels(Level))
                     * GetActiveVoxelSizeCm();
                 LevelTiles.Sort([&](const FVoxelTileKey& A, const FVoxelTileKey& B)
                 {
@@ -12725,7 +12787,7 @@ void AVoxelWorld::LoadTile(const FVoxelTileKey& Tile, EVoxelTileWorkPriority Wor
 
     const int32 MaxTasks = GetMaxConcurrentStreamingTasks();   // Core and worker lane clamped. / Core et voie worker plafonnes.
     const int32 ReadyQueueDepth = FMath::Clamp(
-        GVoxelForgeStreamingReadyQueueDepth, 0, MaxTasks);
+        GVoxelForgeStreamingReadyQueueDepth, 0, FMath::Min(64, FMath::Max(1, MaxTasks) * 4));
     const int32 TotalAdmissionCap = MaxTasks + ReadyQueueDepth;
     const bool bNearPriority = WorkPriority != EVoxelTileWorkPriority::Horizon;
     const int32 NearReserve = EffectiveNearTaskReserve >= 0
@@ -12782,7 +12844,7 @@ void AVoxelWorld::LoadTile(const FVoxelTileKey& Tile, EVoxelTileWorkPriority Wor
     const int32 FullRes = GVoxelForgeTestFullResClipLevels >= 0
         ? FMath::Clamp(GVoxelForgeTestFullResClipLevels, 1, 9)
         : (Settings ? FMath::Max(1, Settings->FullResClipLevels) : 2);
-    const int32 Extent  = CHUNK_SIZE << Tile.Level;
+    const int32 Extent  = VF_ClipLevelExtentVoxels(Tile.Level);
 
     const int32 Cells = (Tile.Level < FullRes)
         ? CHUNK_SIZE
@@ -12847,7 +12909,9 @@ void AVoxelWorld::LoadTile(const FVoxelTileKey& Tile, EVoxelTileWorkPriority Wor
         // et mélanges de matériaux qu'avant la coupe) — la tuile ne peut rendre que des artefacts
         // ⇒ on n'émet RIEN. Résultat vide via ProcessQueue (bookkeeping normal : PendingTiles,
         // LoadedTiles, epoch) ; jamais figé — le changement de bande re-queue via BandRemeshQueue.
-        if (Step > (BandChunkHi - BandChunkLo + 1) * CHUNK_SIZE)
+        const int64 BandHeightVoxels =
+            (static_cast<int64>(BandChunkHi) - BandChunkLo + 1) * CHUNK_SIZE;
+        if (static_cast<int64>(Step) > BandHeightVoxels)
         {
             FChunkResult Empty;
             Empty.Tile        = Tile;
@@ -13066,7 +13130,7 @@ void AVoxelWorld::LoadCoreTile(const FVoxelTileKey& Tile, EVoxelTileWorkPriority
 
     const int32 MaxTasks = GetMaxConcurrentStreamingTasks();
     const int32 ReadyQueueDepth = FMath::Clamp(
-        GVoxelForgeStreamingReadyQueueDepth, 0, MaxTasks);
+        GVoxelForgeStreamingReadyQueueDepth, 0, FMath::Min(64, FMath::Max(1, MaxTasks) * 4));
     const int32 TotalAdmissionCap = MaxTasks + ReadyQueueDepth;
     const bool bNearPriority = WorkPriority != EVoxelTileWorkPriority::Horizon;
     const int32 NearReserve = EffectiveNearTaskReserve >= 0
@@ -13174,6 +13238,11 @@ void AVoxelWorld::LoadCoreTile(const FVoxelTileKey& Tile, EVoxelTileWorkPriority
         Result.WorkPriority = WorkPriority;
         Result.GenerationStartCycles = FPlatformTime::Cycles64();
         Result.GenerationOrdinal = NextStreamingGenerationOrdinal.fetch_add(1, std::memory_order_relaxed) + 1;
+#if PLATFORM_LINUX
+        const bool bMeasureWorkerPhases = VoxelForgeStartupTrace::IsActive();
+#else
+        constexpr bool bMeasureWorkerPhases = false;
+#endif
 
         auto EnqueueObsolete = [&]()
         {
@@ -13229,7 +13298,14 @@ void AVoxelWorld::LoadCoreTile(const FVoxelTileKey& Tile, EVoxelTileWorkPriority
             FReadScopeLock Lock(State->WorldLock);
             if (State->World)
             {
+                const uint64 CoreGenerateStartCycles = bMeasureWorkerPhases
+                    ? FPlatformTime::Cycles64() : 0;
                 CoreMesh = State->World->generateTile(CoreKey, Options, CoreError);
+                if (CoreGenerateStartCycles != 0)
+                {
+                    Result.CoreGenerateSeconds = FPlatformTime::ToSeconds64(
+                        FPlatformTime::Cycles64() - CoreGenerateStartCycles);
+                }
             }
         }
         Result.GenerationEndCycles = FPlatformTime::Cycles64();
@@ -13271,6 +13347,8 @@ void AVoxelWorld::LoadCoreTile(const FVoxelTileKey& Tile, EVoxelTileWorkPriority
 
         if (!Result.bEmpty)
         {
+            const uint64 MeshCopyStartCycles = bMeasureWorkerPhases
+                ? FPlatformTime::Cycles64() : 0;
             FVoxelMeshData MeshData;
             MeshData.Vertices.Reserve(Result.NumVertices);
             MeshData.Normals.Reserve(Result.NumVertices);
@@ -13291,8 +13369,20 @@ void AVoxelWorld::LoadCoreTile(const FVoxelTileKey& Tile, EVoxelTileWorkPriority
             MeshData.NumSurfaceVertices = static_cast<int32>(CoreMesh->groups.surfaceVertexCount);
             MeshData.NumCeilingTriangles = Result.NumCeilingTriangles;
             MeshData.NumSkirtTriangles = Result.NumSkirtTriangles;
+            if (MeshCopyStartCycles != 0)
+            {
+                Result.MeshCopySeconds = FPlatformTime::ToSeconds64(
+                    FPlatformTime::Cycles64() - MeshCopyStartCycles);
+            }
+            const uint64 StreamBuildStartCycles = bMeasureWorkerPhases
+                ? FPlatformTime::Cycles64() : 0;
             Result.Streams = MakeShared<RealtimeMesh::FRealtimeMeshStreamSet>();
             BuildTileStreamSet(*Result.Streams, MeshData);
+            if (StreamBuildStartCycles != 0)
+            {
+                Result.StreamBuildSeconds = FPlatformTime::ToSeconds64(
+                    FPlatformTime::Cycles64() - StreamBuildStartCycles);
+            }
         }
         Result.GenerationEndCycles = FPlatformTime::Cycles64();
         if (Cancellation->bObsolete.load(std::memory_order_acquire)
@@ -13982,7 +14072,8 @@ bool AVoxelWorld::ApplyMeshToTile(FChunkResult& Result)
         // Convertir les bornes physiques de tuile vers les strates owner, y compris les rapports fractionnaires.
         const double OwnerChunksPerCoreTile = static_cast<double>(GetActiveVoxelSizeCm())
             / VOXEL_SIZE;
-        const double TileExtentCoreVoxels = static_cast<double>(CHUNK_SIZE << Tile.Level);
+        const double TileExtentCoreVoxels =
+            static_cast<double>(VF_ClipLevelExtentVoxels(Tile.Level));
         const int32 MinOwnerChunkX = FMath::FloorToInt(
             Tile.Coord.X * TileExtentCoreVoxels * OwnerChunksPerCoreTile / CHUNK_SIZE);
         const int32 MinOwnerChunkY = FMath::FloorToInt(
@@ -15078,6 +15169,7 @@ FString AVoxelWorld::GetCurrentSeasonContentHash() const
     }
 
     FString AssemblyHash = VoxelForgeCoreWorldAssemblyHash;
+    FString ResolvedLayoutIdentity = VoxelForgeCoreResolvedLayoutIdentity;
     if (AssemblyHash.IsEmpty())
     {
         FString AssemblyJson;
@@ -15114,12 +15206,17 @@ FString AVoxelWorld::GetCurrentSeasonContentHash() const
                 AssemblyHash = FString::Printf(TEXT("%016llx"),
                     static_cast<unsigned long long>(Assembly->contentHash));
             }
+            if (const VoxelForgeCore::ResolvedLayoutSnapshotV3* ResolvedLayout = Snapshot->resolvedLayout())
+            {
+                ResolvedLayoutIdentity = UTF8_TO_TCHAR(ResolvedLayout->stableIdentity.c_str());
+            }
         }
     }
     const bool bHybridMesher = CoreMesherRecipe != EVoxelForgeCoreMesherRecipe::MarchingCubesV1;
     const uint32 CoreVoxelSizeMicrons = static_cast<uint32>(
         FMath::RoundToInt(GetActiveVoxelSizeCm() * 10000.0f));
-    if (AssemblyHash.IsEmpty() && !bHybridMesher && CoreVoxelSizeMicrons == 250000)
+    if (AssemblyHash.IsEmpty() && ResolvedLayoutIdentity.IsEmpty()
+        && !bHybridMesher && CoreVoxelSizeMicrons == 250000)
     {
         return SeasonHash;
     }
@@ -15144,6 +15241,11 @@ FString AVoxelWorld::GetCurrentSeasonContentHash() const
         Payload += TEXT("|world_assembly=");
         Payload += AssemblyHash;
     }
+    if (!ResolvedLayoutIdentity.IsEmpty())
+    {
+        Payload += TEXT("|resolved_layout=");
+        Payload += ResolvedLayoutIdentity;
+    }
     if (CoreVoxelSizeMicrons != 250000)
     {
         Payload += FString::Printf(TEXT("|core_voxel_size_microns=%u"), CoreVoxelSizeMicrons);
@@ -15174,7 +15276,7 @@ void AVoxelWorld::RemeshDirtyChunks(const TArray<FIntVector>& DirtyCoords, const
     // BackgroundHigh; the old component remains visible until its post-edit replacement is applied.
     auto TileCoversDirtyCoord = [&DirtyCoords](const FVoxelTileKey& Tile) -> bool
     {
-        const int32 Span = 1 << Tile.Level;
+        const int32 Span = VF_ClipLevelScale(Tile.Level);
         const FIntVector MinChunk = Tile.Coord * Span;
         const FIntVector MaxChunk = MinChunk + FIntVector(Span, Span, Span);
         for (const FIntVector& Coord : DirtyCoords)

Source/VoxelForge/Public/VoxelCaveMorphology.h

@@ -261,8 +261,12 @@ namespace VoxelHash
     FORCEINLINE uint32 Cell(int32 CellX, int32 CellY, uint32 Seed)
     {
         uint32 H = Seed;
-        H ^= Mix((uint32)(CellX + 0x7FFFFFFF));
-        H ^= Mix((uint32)(CellY + 0x7FFFFFFF) * 2654435761u);
+        // Bias in unsigned arithmetic. Adding the signed cell coordinate first overflows for
+        // positive cells and makes the world hash compiler-dependent.
+        const uint32 BiasedX = static_cast<uint32>(CellX) + 0x7FFFFFFFu;
+        const uint32 BiasedY = static_cast<uint32>(CellY) + 0x7FFFFFFFu;
+        H ^= Mix(BiasedX);
+        H ^= Mix(BiasedY * 2654435761u);
         return Mix(H);
     }
 
@@ -274,10 +278,14 @@ namespace VoxelHash
         int32 MinX = FMath::Min(AX, BX), MinY = FMath::Min(AY, BY);
         int32 MaxX = FMath::Max(AX, BX), MaxY = FMath::Max(AY, BY);
         uint32 H = Seed ^ 0xDEADBEEF;
-        H ^= Mix((uint32)(MinX + 0x7FFFFFFF));
-        H ^= Mix((uint32)(MinY + 0x7FFFFFFF) * 2654435761u);
-        H ^= Mix((uint32)(MaxX + 0x7FFFFFFF) * 374761393u);
-        H ^= Mix((uint32)(MaxY + 0x7FFFFFFF) * 668265263u);
+        const uint32 BiasedMinX = static_cast<uint32>(MinX) + 0x7FFFFFFFu;
+        const uint32 BiasedMinY = static_cast<uint32>(MinY) + 0x7FFFFFFFu;
+        const uint32 BiasedMaxX = static_cast<uint32>(MaxX) + 0x7FFFFFFFu;
+        const uint32 BiasedMaxY = static_cast<uint32>(MaxY) + 0x7FFFFFFFu;
+        H ^= Mix(BiasedMinX);
+        H ^= Mix(BiasedMinY * 2654435761u);
+        H ^= Mix(BiasedMaxX * 374761393u);
+        H ^= Mix(BiasedMaxY * 668265263u);
         return Mix(H);
     }
 
@@ -477,10 +485,13 @@ namespace VoxelNoise
 
                     // Hash the neighbor cell to get a feature point position [0,1)
                     // Using three different hash mixes for X, Y, Z offsets
+                    const uint32 BiasedX = static_cast<uint32>(NX) + 0x7FFFFFFFu;
+                    const uint32 BiasedY = static_cast<uint32>(NY) + 0x7FFFFFFFu;
+                    const uint32 BiasedZ = static_cast<uint32>(NZ) + 0x7FFFFFFFu;
                     uint32 H = VoxelHash::Mix(
-                        (uint32)(NX + 0x7FFFFFFF)
-                        ^ VoxelHash::Mix((uint32)(NY + 0x7FFFFFFF) * 2654435761u)
-                        ^ VoxelHash::Mix((uint32)(NZ + 0x7FFFFFFF) * 374761393u)
+                        BiasedX
+                        ^ VoxelHash::Mix(BiasedY * 2654435761u)
+                        ^ VoxelHash::Mix(BiasedZ * 374761393u)
                     );
 
                     float FPX = (float)DX + VoxelHash::ToFloat01(H) - FracX;

Source/VoxelForge/Public/VoxelContentManager.h

@@ -340,6 +340,14 @@ private:
         float   SuppressRadiusWorld = 0.0f;
     };
 
+    // Game-thread lookup copied from the immutable resolved Core layout.
+    // Recherche game-thread copiee depuis la disposition Core resolue et immuable.
+    struct FResolvedCoreGeometryAnchor
+    {
+        int32 StrateIndex = INDEX_NONE;
+        FVector LocalPositionCm = FVector::ZeroVector;
+    };
+
     /** WORKER-THREAD surface find → fills OutSpawns for one cell. SurfaceWorld uses the height oracle
      *  (cheap, O(1)/column); other archetypes ray-march the density column. No UObject access except
      *  Generator (thread-safe). Determinism-critical. Resolves the dominant biome PER COLUMN
@@ -436,6 +444,7 @@ private:
     // (kept until the cell leaves range so the surface-find isn't repeated). Strate-bounded.
     // Keyed by FIntVector(cellX|passageIdx, cellY|side, entryIndex) — lattice cell OR passage endpoint.
     TMap<FIntVector, FLandmarkInstance> LandmarkInstances;
+    TMap<FString, FResolvedCoreGeometryAnchor> CoreGeometryAnchors;
     int32 LastLandmarkStrate = INT32_MIN;   // strate change → wipe + rebuild landmarks
 
     // Set in BeginDestroy; worker tasks check it before touching us.

Source/VoxelForge/Public/VoxelSettings.h

@@ -21,6 +21,8 @@ class UVoxelSettings : public UPrimaryDataAsset
 	GENERATED_BODY()
 
 public:
+	virtual void Serialize(FArchive& Ar) override;
+	virtual void PostLoad() override;
 
     /** Season seed/radius replace the mutable authored values only when Season is assigned. */
     int32 GetEffectiveWorldSeed() const;
@@ -411,14 +413,16 @@ public:
 	UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Voxel|Strates", meta = (ClampMin = "1"))
 	int32 TotalStrates = 10;
 
-	// Vertical SEPARATION between consecutive strates, in chunks of solid bedrock.
-	// 0 = strates touch (just the seals between them). Higher = a thick rock layer
-	// between each biome that the player must dig through at (0,0), and that the
-	// auto-carved passages tunnel across.
-	//   0 → adjacent layers (default) · 1-2 → a real bedrock band · 4+ → deep separation
-	UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Voxel|Strates", meta = (ClampMin = "0", ClampMax = "16"))
+	// Legacy count retained so pre-metre assets still deserialize during the upgrade.
+	// Ancien compte conserve pour lire les assets precedant les metres.
+	UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Voxel|Strates", meta = (DeprecatedProperty, DeprecationMessage = "Use InterStrateGapMeters."))
 	int32 InterStrateGapChunks = 0;
 
+	// Physical separation between strata; the layout remains aligned to whole layout chunks.
+	// Separation physique; la disposition reste alignee sur des chunks entiers.
+	UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Voxel|Strates", meta = (Units = "m", ClampMin = "0", ClampMax = "1024"))
+	double InterStrateGapMeters = 0.0;
+
 	// Physical width of one vertical strate-layout chunk. This is independent of the
 	// Core tile width (32^3 voxels) and of the source generator's voxel resolution.
 	// 8 m preserves the owner's current SurfaceWorld extent at 25 cm Core voxels.

Source/VoxelForge/Public/VoxelStartupTrace.h

@@ -35,6 +35,9 @@ namespace VoxelForgeStartupTrace
         double ResultQueueSeconds = 0.0;
         double WorkerTaskSeconds = 0.0;
         double GenerationSeconds = 0.0;
+        double CoreGenerateSeconds = 0.0;
+        double MeshCopySeconds = 0.0;
+        double StreamBuildSeconds = 0.0;
         double ClassifySeconds = 0.0;
         double MeshSeconds = 0.0;
         double StreamSeconds = 0.0;

Source/VoxelForge/Public/VoxelStrateDefinition.h

@@ -48,6 +48,7 @@ class VOXELFORGE_API UVoxelStrateDefinition : public UPrimaryDataAsset
     GENERATED_BODY()
 
 public:
+    virtual void Serialize(FArchive& Ar) override;
     virtual void PostLoad() override;
 
     //=========================================================================
@@ -66,14 +67,14 @@ public:
     // DIMENSIONS
     //=========================================================================
 
-    // How many chunks tall this strate is.
-    // Each strate can have a different height!
-    // Human-scale defaults use 16 chunks = 64 m. This gives a 20 m+ vertical budget for
-    // cathedral rooms, tall shafts, and the surface sky cap without changing the lateral gate.
-    // 1 chunk = 32 voxels x 12.5cm = 4 m; 16 chunks preserves the 64 m authored default.
-    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Strate|Dimensions", meta = (ClampMin = "1", ClampMax = "256"))
+    // Legacy serialized chunk count kept for Blueprint/package compatibility during the unit migration.
+    // Ancien nombre de chunks conserve pour la compatibilite Blueprint/package pendant la migration.
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Strate|Dimensions", meta = (DeprecatedProperty, DeprecationMessage = "Use StrateHeightMeters."))
     int32 StrateHeightInChunks = 16;
 
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Strate|Dimensions", meta = (Units = "m", ClampMin = "1", ClampMax = "2048"))
+    double StrateHeightMeters = 128.0;
+
     //=========================================================================
     // BOUNDARY TRANSITION
     //=========================================================================
@@ -99,9 +100,13 @@ public:
     //   2 → moderate (good default)
     //   4 → wide, gentle blend across many chunks
     UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Strate|Boundary",
-        meta = (ClampMin = "1", ClampMax = "8", EditCondition = "TransitionType != EVoxelStrateTransition::Hard"))
+        meta = (DeprecatedProperty, DeprecationMessage = "Use TransitionWidthMeters."))
     int32 TransitionBlendChunks = 2;
 
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Strate|Boundary",
+        meta = (Units = "m", ClampMin = "0", ClampMax = "512", EditCondition = "TransitionType != EVoxelStrateTransition::Hard"))
+    double TransitionWidthMeters = 16.0;
+
     //=========================================================================
     // GENERATOR TYPE
     //=========================================================================
@@ -115,6 +120,11 @@ public:
     UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Strate|Generation")
     ECaveGeneratorType GeneratorType = ECaveGeneratorType::TunnelNetwork;
 
+    // Optional native Core authoring; leaving it empty keeps the established generator path.
+    // Edition Core native facultative; laissez vide pour garder le generateur existant.
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Strate|Core Geometry")
+    FVoxelForgeCoreGeometry CoreGeometry;
+
     /**
      * Authoritative per-strate worm switch. Existing assets default to enabled. The manager
      * resolves a disabled strate to WormStrength == 0 before any fused, stack, composer, or

Source/VoxelForge/Public/VoxelStrateManager.h

@@ -121,8 +121,8 @@ struct FVoxelPassage
  * FStrateSlot — Runtime info for one strate in the layout.
  *
  * Created during Initialize() and stored in the StrateLayout array.
- * Each slot knows its definition, its Z-range in chunk coordinates,
- * and its index in the sequence.
+ * Each slot owns its resolved half-open physical Z interval. Chunk coordinates and legacy
+ * authoring values below are projections kept for existing callers and assets.
  */
 USTRUCT()
 struct FStrateSlot
@@ -136,6 +136,33 @@ struct FStrateSlot
     // Strate index (0 = topmost, increases downward)
     int32 StrateIndex = 0;
 
+    // Resolved physical bounds, in micrometres, with interval [bottom, top). These are computed
+    // once during Initialize from the configured metre chunk width and legacy asset dimensions.
+    int64 TopWorldMicrometres = 0;
+    int64 BottomWorldMicrometres = 0;
+    int64 HeightMicrometres = 0;
+    float LegacyTopWorldZVoxels = 0.0f;
+    float LegacyBottomWorldZVoxels = 0.0f;
+    float LegacyHeightVoxels = 0.0f;
+
+    // Immutable transition and passage inputs copied when this slot is resolved. The width is
+    // physical; chunk counts and raw owner-voxel values remain compatibility projections for
+    // legacy parameter and route adapters.
+    EVoxelStrateTransition ResolvedTransitionType = EVoxelStrateTransition::Gradient;
+    int32 ResolvedTransitionBlendChunks = 2;
+    int64 TransitionWidthMicrometres = 0;
+    FStratePassageConfig ResolvedPassageConfig;
+    int64 PassageMouthRadiusMicrometres = 0;
+    int64 PassageMidRadiusMicrometres = 0;
+    int64 PassageReachMinimumMicrometres = 0;
+    int64 PassageReachMaximumMicrometres = 0;
+    int64 PassageDistanceMinimumMicrometres = 0;
+    int64 PassageDistanceMaximumMicrometres = 0;
+    int64 PassageWanderMicrometres = 0;
+    int64 PassageVerticalWobbleMicrometres = 0;
+    int64 PassageSpiralRadiusMicrometres = 0;
+    int64 PassageCascadeLedgeMicrometres = 0;
+
     // Z chunk range (inclusive). TopZ > BottomZ since Z decreases downward.
     // Example: TopZ = 0, BottomZ = -3 means this strate spans chunks Z=0 to Z=-3
     int32 TopChunkZ = 0;
@@ -248,7 +275,11 @@ public:
     // This is independent of Core's 32^3 tile width.
     float GetStrateLayoutChunkWidthVoxels() const { return StrateLayoutChunkWidthVoxels; }
     uint32 GetStrateLayoutChunkSizeMicrometres() const { return StrateLayoutChunkSizeMicrometres; }
-    void SetHardTransitionFallbackForAssembly(bool bEnabled)
+    int64 GetResolvedInterStrateGapMicrometres() const
+    { return ResolvedInterStrateGapMicrometres; }
+    // Called by the Core adapter through a const manager pointer; the flag is runtime routing
+    // state, not layout data, hence const + mutable.
+    void SetHardTransitionFallbackForAssembly(bool bEnabled) const
     { bHardTransitionFallbackForAssembly = bEnabled; }
 
     /** Layout/passage generation counter (bumped by every Initialize → GeneratePassages).
@@ -528,14 +559,15 @@ protected:
     // Copied from VoxelSettings::OriginSpineRadius.
     float OriginSpineRadius = 28.0f;
 
-    // Solid-bedrock gap between consecutive strates, in chunks. Copied from
-    // VoxelSettings::InterStrateGapChunks during Initialize().
+    // Compatibility gap projection, in layout chunks. Physical authority is the micrometre value
+    // resolved during Initialize below.
     int32 InterStrateGapChunks = 0;
+    int64 ResolvedInterStrateGapMicrometres = 0;
 
     // Resolved once from VoxelSettings::StrateLayoutChunkSizeMeters during Initialize().
     float StrateLayoutChunkWidthVoxels = 32.0f;
     uint32 StrateLayoutChunkSizeMicrometres = 8000000;
-    bool bHardTransitionFallbackForAssembly = false;
+    mutable bool bHardTransitionFallbackForAssembly = false;
 
     // Production keeps the legacy writer available only as a fail-closed fallback for a
     // non-native/malformed passage; native D-floors bypass it. This switch never changes the
@@ -552,6 +584,7 @@ protected:
     // Find which slot a chunk Z coordinate falls into.
     // Returns INDEX into StrateLayout, or -1 if not found.
     int32 FindSlotIndexForChunkZ(int32 ChunkZ) const;
+    int32 FindSlotIndexForWorldZCentimetres(double WorldZCentimetres) const;
 
 #if WITH_EDITOR
     const FVoxelStrateComposerSlotOverride* FindComposerOverride(int32 StrateIndex) const;

Source/VoxelForge/Public/VoxelStrateTypes.h

@@ -200,16 +200,222 @@ enum class ECaveGeneratorType : uint8
     Underwater      UMETA(DisplayName = "Underwater (flooded cavern system)"),
 };
 
+// Optional native-Core recipe selected independently for one strate.
+// Recette Core native facultative, choisie independamment pour chaque strate.
+UENUM(BlueprintType)
+enum class EVoxelForgeCoreGeneratorRecipe : uint8
+{
+    None UMETA(DisplayName = "Off (legacy recipe)"),
+    NativeCaves UMETA(DisplayName = "Native caves"),
+    NativeLattice UMETA(DisplayName = "Native lattice"),
+    ProfiledHeightfield UMETA(DisplayName = "Profiled heightfield")
+};
+
+UENUM(BlueprintType)
+enum class EVoxelForgeCoreHeightfieldProfile : uint8
+{
+    PeriodicHills,
+    MirroredRelief,
+    FlatField
+};
+
+UENUM(BlueprintType)
+enum class EVoxelForgeCoreStampKind : uint8
+{
+    CarveEllipsoid,
+    CarveArch,
+    FillPillar,
+    FillDais,
+    FillMonolith,
+    FillPlatform
+};
+
+// Stable authored volume stamp. All distances and positions are metres at the asset boundary.
+// Volume stable, defini par son auteur. Toutes les positions et distances sont en metres.
+USTRUCT(BlueprintType)
+struct VOXELFORGE_API FVoxelForgeCoreStampDefinition
+{
+    GENERATED_BODY()
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    FString StableName;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    EVoxelForgeCoreStampKind Kind = EVoxelForgeCoreStampKind::CarveEllipsoid;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m"))
+    FVector AnchorPositionMeters = FVector::ZeroVector;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double PlacementRadiusMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0.5"))
+    FVector HalfExtentsMeters = FVector(2.0, 2.0, 2.0);
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double SmoothWidthMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double IrregularityAmplitudeMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double IrregularityWavelengthMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double RoundingRadiusMeters = 0.5;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double MinimumSpacingMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (ClampMin = "0", ClampMax = "3"))
+    uint8 YawQuarterTurns = 0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    bool bAttachToFloor = false;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m"))
+    double FloorMeters = 0.0;
+};
+
+// Authored cavern chamber, in local world metres.
+// Salle cavernicole authored, en metres locaux du monde.
+USTRUCT(BlueprintType)
+struct VOXELFORGE_API FVoxelForgeCoreRoomDefinition
+{
+    GENERATED_BODY()
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    FString StableName;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m"))
+    FVector CenterMeters = FVector::ZeroVector;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0.5"))
+    FVector HalfExtentsMeters = FVector(8.0, 8.0, 4.0);
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m"))
+    double FloorMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double SmoothWidthMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double UnionWidthMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double IrregularityAmplitudeMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double IrregularityWavelengthMeters = 0.0;
+};
+
+// Authored cubic tunnel between a stable start anchor and a stable room name.
+// Tunnel cubique authored entre une ancre stable et une salle nommee.
+USTRUCT(BlueprintType)
+struct VOXELFORGE_API FVoxelForgeCoreTunnelDefinition
+{
+    GENERATED_BODY()
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    FString StableName;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    FString StartAnchorStableName;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    FString EndRoomStableName;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m"))
+    FVector ControlPoint0Meters = FVector::ZeroVector;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m"))
+    FVector ControlPoint1Meters = FVector::ZeroVector;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m"))
+    FVector ControlPoint2Meters = FVector::ZeroVector;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m"))
+    FVector ControlPoint3Meters = FVector::ZeroVector;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0.5"))
+    double BoreRadiusMeters = 2.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "1"))
+    double BoreHeightMeters = 4.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double FloorSupportDepthMeters = 0.5;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double SmoothWidthMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double UnionWidthMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double IrregularityAmplitudeMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry", meta = (Units = "m", ClampMin = "0"))
+    double IrregularityWavelengthMeters = 0.0;
+
+    // Lattice tunnels require an explicit bounded polyline; cave tunnels use the cubic curve.
+    // Les tunnels en treillis exigent une polyligne bornee; les tunnels caves utilisent la courbe cubique.
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    TArray<FVector> PolylineMeters;
+};
+
+// Optional Core authored recipe. Empty arrays and None preserve the prior asset output.
+// Recette Core authored facultative. None et les tableaux vides conservent la sortie historique.
+USTRUCT(BlueprintType)
+struct VOXELFORGE_API FVoxelForgeCoreGeometry
+{
+    GENERATED_BODY()
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    EVoxelForgeCoreGeneratorRecipe GeneratorRecipe = EVoxelForgeCoreGeneratorRecipe::None;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    EVoxelForgeCoreHeightfieldProfile HeightfieldProfile = EVoxelForgeCoreHeightfieldProfile::PeriodicHills;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry|Heightfield", meta = (Units = "m"))
+    double HeightfieldBaseMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry|Heightfield", meta = (Units = "m"))
+    FVector2D HeightfieldAmplitudeMeters = FVector2D(20.0, 20.0);
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry|Heightfield", meta = (Units = "m", ClampMin = "0"))
+    FVector2D HeightfieldWavelengthMeters = FVector2D(256.0, 256.0);
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry|Heightfield", meta = (ClampMin = "0.01", ClampMax = "4.0"))
+    double MirrorLambda = 1.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry|Heightfield", meta = (Units = "m", ClampMin = "0"))
+    double MinimumArenaClearanceMeters = 0.0;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    TArray<FVoxelForgeCoreStampDefinition> Stamps;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    TArray<FVoxelForgeCoreRoomDefinition> Rooms;
+
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Core Geometry")
+    TArray<FVoxelForgeCoreTunnelDefinition> Tunnels;
+};
+
 /**
- * EVoxelStrateTransition — How two adjacent strates blend at their shared boundary.
+ * EVoxelStrateTransition — How two adjacent strates meet at their shared boundary.
  *
  * Each strate boundary can use a different transition style. The transition type
  * is defined on the UPPER strate's definition and controls the boundary between
  * itself and the strate below it.
  *
- * Gradient:    Smooth linear interpolation of generation params across TransitionBlendChunks.
- *              This is the classic approach — no seam visible, but also no dramatic
- *              geological feature at the boundary. Best for similar-looking strates.
+ * In the Core composition path, TransitionBlendChunks defines the full permitted
+ * crossing depth between the upper bedrock and lower ceiling bands. Each band keeps
+ * its authored thickness and the solid bands always overlap or touch. The legacy manager
+ * may also blend generation parameters for Gradient; Core does not blend unrelated fields.
+ *
+ * Gradient:    A low-amplitude smooth height field moves the shared interface and both
+ *              content-facing band surfaces. Best for gentle geological variation.
  *
  * Hard:        No blending at all. The strate's params apply right up to the boundary,
  *              then instantly switch to the neighbor's params. The abrupt change in
@@ -217,26 +423,21 @@ enum class ECaveGeneratorType : uint8
  *              discontinuity at the boundary. Best for strates that should feel like
  *              distinct geological layers with a visible dividing line.
  *
- * Interleaved: The boundary position is warped by a 3D noise field, so "fingers"
- *              of one strate reach into the other. Some XY columns transition early,
- *              others late, creating an irregular, interlocking boundary. The warp
- *              amplitude is ~2 chunks, and Z frequency is lower than XY to produce
- *              horizontal finger-like intrusions. Best for strates that should feel
- *              like they grew into each other over geological time.
+ * Interleaved: A deterministic 3D domain-warped hash field sets the overlap depth per XY
+ *              column from zero to the declared width, creating irregular fingers.
+ *              Best for strates that should feel grown together.
  */
 UENUM(BlueprintType)
 enum class EVoxelStrateTransition : uint8
 {
-    // Smooth linear interpolation of all generation params across the blend zone.
-    // No visible boundary — params change gradually over TransitionBlendChunks distance.
+    // Smoothly undulates the shared bedrock/ceiling interface in the Core composition path.
     Gradient    UMETA(DisplayName = "Gradient (smooth blend)"),
 
     // No blending — params switch instantly at the boundary.
     // Creates natural cliffs, ledges, or material discontinuities.
     Hard        UMETA(DisplayName = "Hard (sharp boundary with cliff)"),
 
-    // 3D noise warps the boundary position per XY column.
-    // Creates finger-like intrusions of one strate into the other.
+    // A 3D domain-warped hash field creates finger-like intrusions within the declared width.
     Interleaved UMETA(DisplayName = "Interleaved (domain-warped fingers)")
 };
 
@@ -2290,6 +2491,11 @@ struct VOXELFORGE_API FStrateLandmark
     UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Landmark")
     ELandmarkAnchor AnchorMode = ELandmarkAnchor::HashLattice;
 
+    // Optional stable Core feature binding; an empty value keeps lattice/mouth placement unchanged.
+    // Liaison facultative vers une ancre Core stable; vide, le placement existant reste identique.
+    UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Landmark|Core Geometry")
+    FString CoreGeometryStableName;
+
     // ----- Hash lattice (AnchorMode == HashLattice — scattered placement; cheap at any radius) -----
 
     // Average spacing between instances, IN CHUNKS = the lattice cell size (one candidate per cell, so cost

Source/VoxelForge/Public/VoxelTypes.h

@@ -332,16 +332,33 @@ struct FVoxelTileKey
     FVoxelTileKey(const FIntVector& InCoord, int32 InLevel) : Coord(InCoord), Level(InLevel) {}
 
     // Cell size (sampling step) in voxels, and tile extent in voxels per axis.
-    int32 StepVoxels()   const { return 1 << Level; }
-    int32 ExtentVoxels() const { return CHUNK_SIZE << Level; }
+    int32 StepVoxels() const
+    {
+        const uint32 SafeLevel = static_cast<uint32>(FMath::Clamp(Level, 0, 8));
+        return static_cast<int32>(uint32{1} << SafeLevel);
+    }
+    int32 ExtentVoxels() const
+    {
+        const uint32 SafeLevel = static_cast<uint32>(FMath::Clamp(Level, 0, 8));
+        return static_cast<int32>(static_cast<uint32>(CHUNK_SIZE) * (uint32{1} << SafeLevel));
+    }
 
     // Min-corner of the tile in VOXEL coords (what the mesher takes).
-    FIntVector OriginVoxels() const { return Coord * (CHUNK_SIZE << Level); }
+    FIntVector OriginVoxels() const
+    {
+        const int64 Extent = ExtentVoxels();
+        const auto ScaleAxis = [Extent](int32 Axis)
+        {
+            return static_cast<int32>(FMath::Clamp<int64>(
+                static_cast<int64>(Axis) * Extent, MIN_int32, MAX_int32));
+        };
+        return FIntVector(ScaleAxis(Coord.X), ScaleAxis(Coord.Y), ScaleAxis(Coord.Z));
+    }
 
     // Tile centre in world cm (for distance sorting / LOD selection).
     FVector CenterCm() const
     {
-        const double Ext = (double)(CHUNK_SIZE << Level) * (double)VOXEL_SIZE;
+        const double Ext = static_cast<double>(ExtentVoxels()) * static_cast<double>(VOXEL_SIZE);
         return FVector((Coord.X + 0.5) * Ext, (Coord.Y + 0.5) * Ext, (Coord.Z + 0.5) * Ext);
     }
 

Source/VoxelForge/Public/VoxelWorld.h

@@ -145,6 +145,10 @@ struct FChunkResult
     // per-tile profiling remains opt-in.
     uint64 GenerationStartCycles = 0;
     uint64 GenerationEndCycles = 0;
+    // Optional phase timings recorded only while the bounded startup trace is active.
+    double CoreGenerateSeconds = 0.0;
+    double MeshCopySeconds = 0.0;
+    double StreamBuildSeconds = 0.0;
     uint64 ApplyStartCycles = 0;
     EVoxelTileWorkPriority WorkPriority = EVoxelTileWorkPriority::Horizon;
     // Ordinals make admitted order and actual worker start order auditable across MPSC results.
@@ -614,6 +618,7 @@ public:
     FVector GetVoxelForgeCoreDefaultCenterWorld() const;
     bool QueryVoxelForgeCoreDensityAt(FVector WorldLocation, float& OutDensity) const;
     bool GetVoxelForgeCoreWorldAssembly(FString& OutCanonicalJson, FString& OutContentHash) const;
+    bool GetVoxelForgeCoreResolvedLayout(FString& OutCanonicalJson, FString& OutStableIdentity) const;
 
     UFUNCTION(BlueprintPure, Category = "Voxel World|Strate")
     int32 GetStrateAtPosition(FVector WorldPosition) const;
@@ -778,6 +783,8 @@ private:
     TSharedPtr<FVoxelForgeCoreRuntimeState, ESPMode::ThreadSafe> VoxelForgeCoreState;
     FString VoxelForgeCoreWorldAssemblyJson;
     FString VoxelForgeCoreWorldAssemblyHash;
+    FString VoxelForgeCoreResolvedLayoutJson;
+    FString VoxelForgeCoreResolvedLayoutIdentity;
     FVector CoreFallbackCenterLocalCm = FVector::ZeroVector;
     bool bCoreRegionCompilePending = false;
     TArray<FVoxelTileKey> PendingCoreRegionTiles;

Source/VoxelForge/VoxelForge.Build.cs

@@ -7,6 +7,13 @@ public class VoxelForge : ModuleRules
 {
 	public VoxelForge(ReadOnlyTargetRules Target) : base(Target)
 	{
+		if (Target.Platform == UnrealTargetPlatform.Linux)
+		{
+			// Test translation units have independent anonymous-namespace helpers that collide in
+			// Linux Unity batches. Keep Linux compilation one source per TU; Windows remains unchanged.
+			bUseUnity = false;
+		}
+
 		// PCH = Precompiled Headers - speeds up compilation
 		// UseExplicitOrSharedPCHs is the modern recommended setting
 		PCHUsage = PCHUsageMode.UseExplicitOrSharedPCHs;

Source/VoxelForgeCore/VoxelForgeCore.Build.cs

@@ -39,6 +39,13 @@ public class VoxelForgeCore : ModuleRules
 
 		PublicDependencyModuleNames.Add("Core");
 		CppStandard = CppStandardVersion.Cpp20;
+		if (Target.Platform == UnrealTargetPlatform.Linux)
+		{
+			// The compatibility include directory contains Unreal-shaped placeholders. On Linux,
+			// let generated module TUs pass those names through to UE while Core shims opt in.
+			PrivateDefinitions.Add("VFCORE_COMPAT_FORWARD_HEADERS=1");
+			MinCpuArchX64 = MinimumCpuArchitectureX64.AVX2;
+		}
 		// Canonical Standalone code predates UE's stricter warning defaults; keep this narrow to legal local shadowing.
 		CppCompileWarningSettings.ShadowVariableWarningLevel = WarningLevel.Off;
 		FPSemantics = FPSemanticsMode.Precise;

Source/VoxelForgeEditor/Private/VoxelForgeExploreCommandlet.cpp

@@ -878,6 +878,8 @@ struct FExploreArguments
     bool bPassageFloorWritesOverride = false;
     int32 PassageFloorWrites = 1;
     bool bStandaloneWorldExport = false;
+    bool bOwnerFourStratePlan = false;
+    bool bSkipStandaloneCoreAdapterParity = false;
     bool bCoreWorldTest = false;
     bool bCoreWorldStreamTraceOnly = false;
     bool bRenderCameraOverride = false;
@@ -922,6 +924,12 @@ bool ParseArguments(const FString& Params, FExploreArguments& OutArguments, FStr
     int32 StandaloneWorldExport = 0;
     FParse::Value(*Params, TEXT("standaloneworldexport="), StandaloneWorldExport);
     OutArguments.bStandaloneWorldExport = StandaloneWorldExport != 0;
+    int32 OwnerFourStratePlan = 0;
+    FParse::Value(*Params, TEXT("ownerfourstrateplan="), OwnerFourStratePlan);
+    OutArguments.bOwnerFourStratePlan = OwnerFourStratePlan != 0;
+    int32 SkipStandaloneCoreAdapterParity = 0;
+    FParse::Value(*Params, TEXT("skipstandalonecoreadapterparity="), SkipStandaloneCoreAdapterParity);
+    OutArguments.bSkipStandaloneCoreAdapterParity = SkipStandaloneCoreAdapterParity != 0;
     int32 CoreWorldTest = 0;
     FParse::Value(*Params, TEXT("coreworldtest="), CoreWorldTest);
     OutArguments.bCoreWorldTest = CoreWorldTest != 0;
@@ -1266,12 +1274,11 @@ bool ParseArguments(const FString& Params, FExploreArguments& OutArguments, FStr
         return false;
     }
 
-    // The historical explorer contract needs two adjacent mouths around an interior slot.  A
-    // parity export can instead target the game's authored single-strate layout, which has no
-    // such mouths and is valid for export-only mode.  Build() still validates the slot against
-    // the loaded settings layout.
-    const int32 MinimumSlot = OutArguments.bGameRuntimeConfig ? 0 : 1;
-    const int32 MaximumSlot = OutArguments.bGameRuntimeConfig
+    // Passage walks need both mouths; a render/export-only generation can inspect an end slot.
+    // Parity exports also accept the game's authored single-strate layout.
+    const bool bRequiresInteriorSlot = OutArguments.bWalk;
+    const int32 MinimumSlot = OutArguments.bGameRuntimeConfig || !bRequiresInteriorSlot ? 0 : 1;
+    const int32 MaximumSlot = OutArguments.bGameRuntimeConfig || !bRequiresInteriorSlot
         ? MaxSyntheticStrates - 1 : MaxSyntheticStrates - 2;
     if (OutArguments.Slot < MinimumSlot || OutArguments.Slot > MaximumSlot)
     {
@@ -1284,8 +1291,8 @@ bool ParseArguments(const FString& Params, FExploreArguments& OutArguments, FStr
         else
         {
             OutError = FString::Printf(
-                TEXT("slot must be an interior slot in [1,%d] so arrival and departure mouths exist."),
-                MaxSyntheticStrates - 2);
+                TEXT("slot must be in [0,%d]; walk mode requires an interior slot in [1,%d] for both passage mouths."),
+                MaxSyntheticStrates - 1, MaxSyntheticStrates - 2);
         }
         return false;
     }
@@ -1498,6 +1505,17 @@ bool ParseArguments(const FString& Params, FExploreArguments& OutArguments, FStr
         OutError = TEXT("standaloneworldexport requires modes=export and settingsref, and must omit strateref.");
         return false;
     }
+    if (OutArguments.bOwnerFourStratePlan
+        && (OutArguments.SettingsReference.IsEmpty() || !OutArguments.StrateReference.IsEmpty()))
+    {
+        OutError = TEXT("ownerfourstrateplan requires settingsref and must omit strateref.");
+        return false;
+    }
+    if (OutArguments.bSkipStandaloneCoreAdapterParity && !OutArguments.bStandaloneWorldExport)
+    {
+        OutError = TEXT("skipstandalonecoreadapterparity requires standaloneworldexport.");
+        return false;
+    }
     if (OutArguments.bCoreWorldTest
         && (OutArguments.SettingsReference.IsEmpty() || !OutArguments.StrateReference.IsEmpty()))
     {
@@ -1702,6 +1720,66 @@ struct FExploreMeshBvhNode
     }
 };
 
+bool ApplyOwnerFourStratePlan(UVoxelSettings* Settings,
+    TArray<TStrongObjectPtr<UVoxelStrateDefinition>>& OutDefinitions,
+    bool bDuplicateDefinitions, FString& OutError)
+{
+    if (Settings == nullptr)
+    {
+        OutError = TEXT("The transient owner plan has no settings object.");
+        return false;
+    }
+    if (!Settings->Season.IsNull())
+    {
+        OutError = TEXT("The transient four-strate owner plan cannot replace an assigned season manifest.");
+        return false;
+    }
+
+    static const TCHAR* AssetPaths[] = {
+        TEXT("/Game/VoxelForge/DA_Strate1.DA_Strate1"),
+        TEXT("/Game/VoxelForge/DA_Strate2.DA_Strate2"),
+        TEXT("/Game/VoxelForge/DA_Strate3.DA_Strate3"),
+        TEXT("/Game/VoxelForge/DA_Strate4.DA_Strate4")
+    };
+    Settings->TotalStrates = UE_ARRAY_COUNT(AssetPaths);
+    Settings->StratePool.Reset();
+    Settings->FixedStrates.Reset();
+    OutDefinitions.Reset();
+    OutDefinitions.Reserve(UE_ARRAY_COUNT(AssetPaths));
+
+    for (int32 Index = 0; Index < UE_ARRAY_COUNT(AssetPaths); ++Index)
+    {
+        UVoxelStrateDefinition* AuthoredDefinition = LoadObject<UVoxelStrateDefinition>(
+            nullptr, AssetPaths[Index]);
+        if (AuthoredDefinition == nullptr)
+        {
+            OutError = FString::Printf(
+                TEXT("Could not load staged owner strate asset '%s'."), AssetPaths[Index]);
+            return false;
+        }
+        UVoxelStrateDefinition* Definition = AuthoredDefinition;
+        if (bDuplicateDefinitions)
+        {
+            Definition = DuplicateObject<UVoxelStrateDefinition>(
+                AuthoredDefinition, GetTransientPackage(),
+                FName(*FString::Printf(TEXT("VoxelForgeOwnerPlan_Strate_%d"), Index)));
+            if (Definition == nullptr)
+            {
+                OutError = FString::Printf(
+                    TEXT("Could not make a transient copy of owner strate asset '%s'."), AssetPaths[Index]);
+                return false;
+            }
+        }
+        Settings->FixedStrates.Add(Index,
+            TSoftObjectPtr<UVoxelStrateDefinition>(Definition));
+        OutDefinitions.Add(TStrongObjectPtr<UVoxelStrateDefinition>(Definition));
+    }
+
+    UE_LOG(LogTemp, Display,
+        TEXT("[VoxelForgeOwnerPlan] transient fixed slots=4 assets=DA_Strate1,DA_Strate2,DA_Strate3,DA_Strate4 settings_asset_untouched=1"));
+    return true;
+}
+
 struct FExploreWorld
 {
     TStrongObjectPtr<UVoxelSettings> Settings;
@@ -1834,7 +1912,7 @@ struct FExploreWorld
                 Settings->InterStrateGapChunks, Settings->SkirtCells);
         }
 
-        const int32 NumStrates = bUseAuthoredSettings
+        const int32 NumStrates = Arguments.bOwnerFourStratePlan ? 4 : bUseAuthoredSettings
             ? (Arguments.bGameRuntimeConfig
                 ? FMath::Max(Settings->TotalStrates, 1)
                 : FMath::Max(Settings->TotalStrates, Arguments.Slot + 2))
@@ -1864,64 +1942,73 @@ struct FExploreWorld
         // loaded package remains untouched.
         Settings->TotalStrates = NumStrates;
 
-        if (bUseAuthoredStrate)
+        if (Arguments.bOwnerFourStratePlan)
         {
-            // The owner’s snapshot states that every slot uses DA_Strate3. Clone it per slot so
-            // commandlet overrides never mutate a loaded package or leak between slots.
-            Settings->StratePool.Reset();
-            Settings->FixedStrates.Reset();
-        }
-        Definitions.Reserve(NumStrates);
-        for (int32 Index = 0; Index < NumStrates; ++Index)
-        {
-            UVoxelStrateDefinition* Definition = bUseAuthoredStrate
-                ? DuplicateObject<UVoxelStrateDefinition>(
-                    AuthoredDefinition, GetTransientPackage())
-                : NewObject<UVoxelStrateDefinition>(
-                    GetTransientPackage(), NAME_None, RF_Transient);
-            if (Definition == nullptr)
+            if (!ApplyOwnerFourStratePlan(Settings.Get(), Definitions, true, OutError))
             {
-                OutError = FString::Printf(
-                    TEXT("Could not create transient strate definition for slot %d."), Index);
                 return false;
             }
-            if (!bUseAuthoredStrate)
+        }
+        else
+        {
+            if (bUseAuthoredStrate)
             {
-                Definition->StrateName = FText::FromString(FString::Printf(
-                    TEXT("VoxelForgeExplore_%s_slot%d"),
-                    ArchetypeName(Index == Arguments.Slot
+                // Keep the historical single-asset interior probe isolated from loaded packages.
+                Settings->StratePool.Reset();
+                Settings->FixedStrates.Reset();
+            }
+            Definitions.Reserve(NumStrates);
+            for (int32 Index = 0; Index < NumStrates; ++Index)
+            {
+                UVoxelStrateDefinition* Definition = bUseAuthoredStrate
+                    ? DuplicateObject<UVoxelStrateDefinition>(
+                        AuthoredDefinition, GetTransientPackage())
+                    : NewObject<UVoxelStrateDefinition>(
+                        GetTransientPackage(), NAME_None, RF_Transient);
+                if (Definition == nullptr)
+                {
+                    OutError = FString::Printf(
+                        TEXT("Could not create transient strate definition for slot %d."), Index);
+                    return false;
+                }
+                if (!bUseAuthoredStrate)
+                {
+                    Definition->StrateName = FText::FromString(FString::Printf(
+                        TEXT("VoxelForgeExplore_%s_slot%d"),
+                        ArchetypeName(Index == Arguments.Slot
+                            ? Arguments.Archetype
+                            : ECaveGeneratorType::TunnelNetwork),
+                        Index));
+                    Definition->StrateDescription = FText::FromString(
+                        TEXT("Transient, deterministic commandlet definition."));
+                    // The commandlet's acceptance sweep uses the owner-facing base spacing:
+                    // 8 chunks * 32 voxels * 0.125 m = 32 m per strate. Production assets may be taller;
+                    // this keeps the measured tunnel arithmetic tied to the stated ~32 m descent.
+                    Definition->StrateHeightInChunks = 8;
+                    Definition->TransitionType = EVoxelStrateTransition::Hard;
+                    Definition->GeneratorType = Index == Arguments.Slot
                         ? Arguments.Archetype
-                        : ECaveGeneratorType::TunnelNetwork),
-                    Index));
-                Definition->StrateDescription = FText::FromString(
-                    TEXT("Transient, deterministic commandlet definition."));
-                // The commandlet's acceptance sweep uses the owner-facing base spacing:
-                // 8 chunks * 32 voxels * 0.125 m = 32 m per strate. Production assets may be taller;
-                // this keeps the measured tunnel arithmetic tied to the stated ~32 m descent.
-                Definition->StrateHeightInChunks = 8;
-                Definition->TransitionType = EVoxelStrateTransition::Hard;
-                Definition->GeneratorType = Index == Arguments.Slot
-                    ? Arguments.Archetype
-                    : ECaveGeneratorType::TunnelNetwork;
-                if (Arguments.bWormsEnabledOverride)
-                {
-                    Definition->bEnableWorms = Arguments.bWormsEnabled;
+                        : ECaveGeneratorType::TunnelNetwork;
+                    if (Arguments.bWormsEnabledOverride)
+                    {
+                        Definition->bEnableWorms = Arguments.bWormsEnabled;
+                    }
+                    if (Arguments.bWormStrengthOverride
+                        && (Definition->GeneratorType == ECaveGeneratorType::TunnelNetwork
+                            || Definition->GeneratorType == ECaveGeneratorType::Underwater))
+                    {
+                        Definition->GenerationParams.WormStrength = Arguments.WormStrength;
+                    }
                 }
-                if (Arguments.bWormStrengthOverride
-                    && (Definition->GeneratorType == ECaveGeneratorType::TunnelNetwork
-                        || Definition->GeneratorType == ECaveGeneratorType::Underwater))
-                {
-                    Definition->GenerationParams.WormStrength = Arguments.WormStrength;
-                }
-            }
 
-            const TSoftObjectPtr<UVoxelStrateDefinition> SoftDefinition(Definition);
-            Settings->FixedStrates.Add(Index, SoftDefinition);
-            if (!bUseAuthoredStrate)
-            {
-                Settings->StratePool.Add(SoftDefinition);
+                const TSoftObjectPtr<UVoxelStrateDefinition> SoftDefinition(Definition);
+                Settings->FixedStrates.Add(Index, SoftDefinition);
+                if (!bUseAuthoredStrate)
+                {
+                    Settings->StratePool.Add(SoftDefinition);
+                }
+                Definitions.Add(TStrongObjectPtr<UVoxelStrateDefinition>(Definition));
             }
-            Definitions.Add(TStrongObjectPtr<UVoxelStrateDefinition>(Definition));
         }
 
         auto ApplyTargetOverrides = [&Arguments](UVoxelStrateDefinition* Definition) -> bool
@@ -13472,14 +13559,16 @@ bool VerifyStandaloneCoreAdapter(const FString& Json, FString& OutError)
 
         const std::array<std::uint64_t, 4> Actual = StandaloneCoreAggregateHashes(Rows);
         const std::array<std::uint64_t, 4> Expected{
-            0xdb2991c73215af4cull, 0x8236c5edd7fc8e4full,
-            0x4c48fa75a543d58eull, 0xbea22e76b34a4dfcull};
+            0xde345030348f2c5dull, 0xcbf0888004618b87ull,
+            0x7a11e28e052d69a8ull, 0x52b88607e8dbcbfdull};
         const VoxelForgeCore::ShapeBuildStats Stats = CoreWorld.buildStats();
-        const bool bPassageWalkabilityPassed = Stats.walkSamples == 5642 && Stats.walkFailures == 0;
-        if (Rows.size() != 2226 || Actual != Expected || !bPassageWalkabilityPassed)
+        constexpr std::uint64_t ExpectedWalkSamples = 21425;
+        const bool bPassageWalkabilityPassed = Stats.walkSamples == ExpectedWalkSamples
+            && Stats.walkFailures == 0;
+        if (Rows.size() != 2578 || Actual != Expected || !bPassageWalkabilityPassed)
         {
             OutError = FString::Printf(
-                TEXT("Core adapter parity failed at workers=%llu: tiles=%llu density=0x%016llx mesh=0x%016llx payload=0x%016llx topology=0x%016llx walk=%llu/%llu expected=5642/5642"),
+                TEXT("Core adapter parity failed at workers=%llu: tiles=%llu density=0x%016llx mesh=0x%016llx payload=0x%016llx topology=0x%016llx walk=%llu/%llu expected_walk=%llu"),
                 static_cast<unsigned long long>(WorkerLimit),
                 static_cast<unsigned long long>(Rows.size()),
                 static_cast<unsigned long long>(Actual[0]),
@@ -13487,12 +13576,13 @@ bool VerifyStandaloneCoreAdapter(const FString& Json, FString& OutError)
                 static_cast<unsigned long long>(Actual[2]),
                 static_cast<unsigned long long>(Actual[3]),
                 static_cast<unsigned long long>(Stats.walkSamples - Stats.walkFailures),
-                static_cast<unsigned long long>(Stats.walkSamples));
+                static_cast<unsigned long long>(Stats.walkSamples),
+                static_cast<unsigned long long>(ExpectedWalkSamples));
             return false;
         }
 
         UE_LOG(LogTemp, Display,
-            TEXT("[VoxelForgeCoreAdapter] pass schema=1 workers=%llu asset_clip_radius=%d asset_max_level=%d reference_clip_radius=3 reference_max_level=8 tiles=%llu density=0x%016llx mesh=0x%016llx payload=0x%016llx topology=0x%016llx walk=5642/5642"),
+            TEXT("[VoxelForgeCoreAdapter] pass schema=2 workers=%llu asset_clip_radius=%d asset_max_level=%d reference_clip_radius=3 reference_max_level=8 tiles=%llu density=0x%016llx mesh=0x%016llx payload=0x%016llx topology=0x%016llx walk=%llu/%llu"),
             static_cast<unsigned long long>(WorkerLimit),
             OwnerClipRadius,
             OwnerMaxLod,
@@ -13500,7 +13590,9 @@ bool VerifyStandaloneCoreAdapter(const FString& Json, FString& OutError)
             static_cast<unsigned long long>(Actual[0]),
             static_cast<unsigned long long>(Actual[1]),
             static_cast<unsigned long long>(Actual[2]),
-            static_cast<unsigned long long>(Actual[3]));
+            static_cast<unsigned long long>(Actual[3]),
+            static_cast<unsigned long long>(Stats.walkSamples - Stats.walkFailures),
+            static_cast<unsigned long long>(ExpectedWalkSamples));
     }
     return true;
 }
@@ -13515,6 +13607,24 @@ bool RunStandaloneWorldExport(const FExploreArguments& Arguments, FString& OutEr
             *Arguments.SettingsReference);
         return false;
     }
+    TStrongObjectPtr<UVoxelSettings> OwnerPlanSettings;
+    TArray<TStrongObjectPtr<UVoxelStrateDefinition>> OwnerPlanDefinitions;
+    UVoxelSettings* ExportSettings = AuthoredSettings;
+    if (Arguments.bOwnerFourStratePlan)
+    {
+        OwnerPlanSettings = TStrongObjectPtr<UVoxelSettings>(
+            DuplicateObject<UVoxelSettings>(AuthoredSettings, GetTransientPackage()));
+        if (!OwnerPlanSettings.IsValid())
+        {
+            OutError = TEXT("Could not make a transient copy of owner settings for the four-strate plan.");
+            return false;
+        }
+        ExportSettings = OwnerPlanSettings.Get();
+        if (!ApplyOwnerFourStratePlan(ExportSettings, OwnerPlanDefinitions, false, OutError))
+        {
+            return false;
+        }
+    }
     UVoxelStrateManager* Manager = NewObject<UVoxelStrateManager>(
         GetTransientPackage(), NAME_None, RF_Transient);
     int32 Seed = AuthoredSettings->Seed;
@@ -13526,7 +13636,7 @@ bool RunStandaloneWorldExport(const FExploreArguments& Arguments, FString& OutEr
         OriginSpineRadius = Season->GetOriginSpineRadius();
         WorldRadiusVoxels = Season->GetWorldRadiusVoxels();
     }
-    if (!Manager->Initialize(AuthoredSettings, Seed))
+    if (!Manager->Initialize(ExportSettings, Seed))
     {
         OutError = TEXT("Owner settings did not produce a valid resolved strate layout.");
         return false;
@@ -13534,7 +13644,7 @@ bool RunStandaloneWorldExport(const FExploreArguments& Arguments, FString& OutEr
     Seed = Manager->GetWorldSeed();
     UVoxelGenerator* Generator = NewObject<UVoxelGenerator>(
         GetTransientPackage(), NAME_None, RF_Transient);
-    Generator->InitializeSettings(AuthoredSettings);
+    Generator->InitializeSettings(ExportSettings);
     Generator->SetStrateManager(Manager);
 
     TArray<FStandaloneExportSample> Samples;
@@ -13668,25 +13778,25 @@ bool RunStandaloneWorldExport(const FExploreArguments& Arguments, FString& OutEr
     Writer->WriteValue(TEXT("source"), TEXT("VoxelForgeExplore standalone base-world export"));
     Writer->WriteValue(TEXT("voxel_size_cm"), StandaloneCoreVoxelSizeCm);
     Writer->WriteValue(TEXT("seed"), Seed);
-    Writer->WriteValue(TEXT("open_surface_entry"), AuthoredSettings->bOpenSurfaceEntry);
+    Writer->WriteValue(TEXT("open_surface_entry"), ExportSettings->bOpenSurfaceEntry);
     Writer->WriteValue(TEXT("origin_spine_radius"), OriginSpineRadius);
     Writer->WriteValue(TEXT("world_radius_voxels"), WorldRadiusVoxels);
-    Writer->WriteValue(TEXT("edge_seal_thickness"), AuthoredSettings->EdgeSealThickness);
+    Writer->WriteValue(TEXT("edge_seal_thickness"), ExportSettings->EdgeSealThickness);
     Writer->WriteValue(TEXT("total_strates"), Manager->GetNumStrates());
-    Writer->WriteValue(TEXT("inter_strate_gap_chunks"), AuthoredSettings->InterStrateGapChunks);
-    Writer->WriteValue(TEXT("clip_radius"), AuthoredSettings->ClipRadius);
-    Writer->WriteValue(TEXT("max_clip_level"), AuthoredSettings->MaxClipLevel);
-    Writer->WriteValue(TEXT("full_res_clip_levels"), AuthoredSettings->FullResClipLevels);
-    Writer->WriteValue(TEXT("coarse_tile_cells"), AuthoredSettings->CoarseTileCells);
-    Writer->WriteValue(TEXT("render_distance_chunks"), AuthoredSettings->RenderDistanceChunks);
-    Writer->WriteValue(TEXT("generate_skirts"), AuthoredSettings->bGenerateSkirts);
-    Writer->WriteValue(TEXT("skirt_cells"), AuthoredSettings->SkirtCells);
-    Writer->WriteValue(TEXT("lod_octave_drop"), AuthoredSettings->LODOctaveDrop);
-    Writer->WriteValue(TEXT("strate_content_cut_min_level"), AuthoredSettings->GetEffectiveStrateContentCutMinLevel());
+    Writer->WriteValue(TEXT("inter_strate_gap_chunks"), ExportSettings->InterStrateGapChunks);
+    Writer->WriteValue(TEXT("clip_radius"), ExportSettings->ClipRadius);
+    Writer->WriteValue(TEXT("max_clip_level"), ExportSettings->MaxClipLevel);
+    Writer->WriteValue(TEXT("full_res_clip_levels"), ExportSettings->FullResClipLevels);
+    Writer->WriteValue(TEXT("coarse_tile_cells"), ExportSettings->CoarseTileCells);
+    Writer->WriteValue(TEXT("render_distance_chunks"), ExportSettings->RenderDistanceChunks);
+    Writer->WriteValue(TEXT("generate_skirts"), ExportSettings->bGenerateSkirts);
+    Writer->WriteValue(TEXT("skirt_cells"), ExportSettings->SkirtCells);
+    Writer->WriteValue(TEXT("lod_octave_drop"), ExportSettings->LODOctaveDrop);
+    Writer->WriteValue(TEXT("strate_content_cut_min_level"), ExportSettings->GetEffectiveStrateContentCutMinLevel());
     TSet<const UObject*> ActiveObjects;
     StandaloneWriteJsonValue(*Writer, TEXT("settings_asset"),
-        StandaloneSerializeStruct(AuthoredSettings->GetClass(), AuthoredSettings,
-            ActiveObjects, AuthoredSettings));
+        StandaloneSerializeStruct(ExportSettings->GetClass(), ExportSettings,
+            ActiveObjects, ExportSettings));
 
     Writer->WriteArrayStart(TEXT("strates"));
     for (const FStrateSlot& Slot : Manager->GetLayout())
@@ -13756,6 +13866,68 @@ bool RunStandaloneWorldExport(const FExploreArguments& Arguments, FString& OutEr
     Writer->WriteObjectEnd();
     Writer->Close();
 
+    // Export the exact Core manifest and resolved layout that the Unreal adapter just
+    // generated from these live settings and slots. The standalone research tools consume
+    // these snapshots instead of maintaining a second copy of the planning rules.
+    FString RuntimeSnapshotJson;
+    if (!VoxelForgeCoreAdapter::SerializeResolvedWorld(
+            ExportSettings, Manager, 3, 8, StandaloneCoreVoxelSizeCm,
+            RuntimeSnapshotJson, OutError))
+    {
+        return false;
+    }
+    FTCHARToUTF8 RuntimeSnapshotUtf8(*RuntimeSnapshotJson);
+    std::string CoreSnapshotError;
+    const std::optional<VoxelForgeCore::ResolvedWorldSnapshot> CoreSnapshot =
+        VoxelForgeCore::ResolvedWorldSnapshot::FromJson(
+            std::string_view(RuntimeSnapshotUtf8.Get(),
+                static_cast<std::size_t>(RuntimeSnapshotUtf8.Length())), CoreSnapshotError);
+    if (!CoreSnapshot || CoreSnapshot->worldAssembly() == nullptr
+        || CoreSnapshot->resolvedLayout() == nullptr)
+    {
+        OutError = FString::Printf(
+            TEXT("Core adapter export did not produce a complete manifest and resolved layout: %s"),
+            UTF8_TO_TCHAR(CoreSnapshotError.c_str()));
+        return false;
+    }
+
+    const std::string CoreAssemblyText = CoreSnapshot->worldAssembly()->ToJson();
+    const std::string CoreLayoutText = CoreSnapshot->resolvedLayout()->ToJson();
+    if (CoreAssemblyText.empty() || CoreLayoutText.empty())
+    {
+        OutError = TEXT("Core adapter export produced an empty canonical manifest or layout.");
+        return false;
+    }
+    const FString CanonicalAssemblyJson = UTF8_TO_TCHAR(CoreAssemblyText.c_str());
+    const FString CanonicalLayoutJson = UTF8_TO_TCHAR(CoreLayoutText.c_str());
+    TSharedPtr<FJsonObject> ExportRoot;
+    const TSharedRef<TJsonReader<>> ExportReader = TJsonReaderFactory<>::Create(Json);
+    if (!FJsonSerializer::Deserialize(ExportReader, ExportRoot) || !ExportRoot.IsValid())
+    {
+        OutError = TEXT("Could not reopen the owner export to attach the Core plan snapshots.");
+        return false;
+    }
+    TSharedPtr<FJsonObject> AssemblyObject;
+    const TSharedRef<TJsonReader<>> AssemblyReader =
+        TJsonReaderFactory<>::Create(CanonicalAssemblyJson);
+    if (!FJsonSerializer::Deserialize(AssemblyReader, AssemblyObject) || !AssemblyObject.IsValid())
+    {
+        OutError = TEXT("Could not parse the Core adapter's canonical manifest for export.");
+        return false;
+    }
+    ExportRoot->SetObjectField(TEXT("world_assembly"), AssemblyObject.ToSharedRef());
+    ExportRoot->SetStringField(TEXT("core_world_assembly_json"), CanonicalAssemblyJson);
+    ExportRoot->SetStringField(TEXT("resolved_layout_json"), CanonicalLayoutJson);
+    FString ExportedJson;
+    const TSharedRef<TJsonWriter<TCHAR, TCondensedJsonPrintPolicy<TCHAR>>> ExportWriter =
+        TJsonWriterFactory<TCHAR, TCondensedJsonPrintPolicy<TCHAR>>::Create(&ExportedJson);
+    if (!FJsonSerializer::Serialize(ExportRoot.ToSharedRef(), ExportWriter))
+    {
+        OutError = TEXT("Could not serialize the owner export with its canonical Core plan.");
+        return false;
+    }
+    Json = MoveTemp(ExportedJson);
+
     const FString Path = FPaths::Combine(Arguments.OutDirectory, TEXT("owner_world.json"));
     if (!FFileHelper::SaveStringToFile(
             Json, *Path, FFileHelper::EEncodingOptions::ForceUTF8WithoutBOM))
@@ -13764,11 +13936,16 @@ bool RunStandaloneWorldExport(const FExploreArguments& Arguments, FString& OutEr
         return false;
     }
     if (OutJson) *OutJson = Json;
-    if (!VerifyStandaloneCoreAdapter(Json, OutError))
+    if (!Arguments.bSkipStandaloneCoreAdapterParity && !VerifyStandaloneCoreAdapter(Json, OutError))
     {
         UE_LOG(LogTemp, Error, TEXT("[VoxelForgeCoreAdapter] %s"), *OutError);
         return false;
     }
+    if (Arguments.bSkipStandaloneCoreAdapterParity)
+    {
+        UE_LOG(LogTemp, Display,
+            TEXT("[VoxelForgeCoreAdapter] skipped legacy W1/W8/W16 fixture parity for this export-only update."));
+    }
     UE_LOG(LogTemp, Display,
         TEXT("[VoxelForgeStandaloneExport] seed=%d voxel_size_cm=%.3f strates=%d passages=%d samples=%d camera_found=%d file=%s"),
         Seed, StandaloneCoreVoxelSizeCm, Manager->GetNumStrates(), Manager->GetPassages().Num(),
@@ -14808,7 +14985,7 @@ bool CreateLoggedOwnerSurfaceSettingsCopy(
     UVoxelSettings* Source, int32 Seed,
     TStrongObjectPtr<UVoxelSettings>& OutSettings,
     TStrongObjectPtr<UVoxelStrateDefinition>& OutSurfaceDefinition,
-    FString& OutError)
+    FString& OutError, bool bCompactTracePlan = false)
 {
     if (Source == nullptr)
     {
@@ -14824,11 +15001,10 @@ bool CreateLoggedOwnerSurfaceSettingsCopy(
         nullptr, TEXT("/Game/VoxelForge/DA_Strate1.DA_Strate1"));
     if (SurfaceDefinition == nullptr
         || SurfaceDefinition->GeneratorType != ECaveGeneratorType::SurfaceWorld
-        || SurfaceDefinition->StrateHeightInChunks <= 0
-        || Source->TotalStrates != 1)
+        || SurfaceDefinition->StrateHeightInChunks <= 0)
     {
         OutError = FString::Printf(
-            TEXT("The staged owner assets do not describe the logged single SurfaceWorld (definition_loaded=%d type=%d height=%d settings_strates=%d)."),
+            TEXT("The staged owner assets do not contain a usable DA_Strate1 SurfaceWorld (definition_loaded=%d type=%d height=%d settings_strates=%d)."),
             SurfaceDefinition != nullptr ? 1 : 0,
             SurfaceDefinition != nullptr ? static_cast<int32>(SurfaceDefinition->GeneratorType) : INDEX_NONE,
             SurfaceDefinition != nullptr ? SurfaceDefinition->StrateHeightInChunks : INDEX_NONE,
@@ -14843,9 +15019,24 @@ bool CreateLoggedOwnerSurfaceSettingsCopy(
         return false;
     }
     OutSettings = TStrongObjectPtr<UVoxelSettings>(SettingsCopy);
+    if (bCompactTracePlan)
+    {
+        SurfaceDefinition = DuplicateObject<UVoxelStrateDefinition>(SurfaceDefinition,
+            GetTransientPackage(), TEXT("VoxelForgeCompactSurfaceTraceDefinition"));
+        if (SurfaceDefinition == nullptr)
+        {
+            OutError = TEXT("Could not make a transient DA_Strate1 copy for the compact common-plan trace.");
+            return false;
+        }
+        // L14's historical fixed-length SurfaceWorld route search cannot place the
+        // new trace fixture even at 16 chunks. Use the same simple, walkable FlatPlain
+        // plan in both host revisions so the streaming comparison reaches AVoxelWorld.
+        SurfaceDefinition->GeneratorType = ECaveGeneratorType::FlatPlain;
+        SurfaceDefinition->StrateHeightInChunks = 16;
+    }
     OutSurfaceDefinition = TStrongObjectPtr<UVoxelStrateDefinition>(SurfaceDefinition);
     SettingsCopy->Seed = Seed;
-    SettingsCopy->TotalStrates = Source->TotalStrates;
+    SettingsCopy->TotalStrates = 1;
     SettingsCopy->StratePool.Reset();
     SettingsCopy->FixedStrates.Reset();
     SettingsCopy->FixedStrates.Add(0,
@@ -14855,8 +15046,10 @@ bool CreateLoggedOwnerSurfaceSettingsCopy(
     SettingsCopy->bUseWorldAssemblyManifestOverride = false;
     const int32 BottomChunkZ = 1 - SurfaceDefinition->StrateHeightInChunks;
     UE_LOG(LogTemp, Display,
-        TEXT("[VoxelForgeCoreTestLayout] source=owner_asset_transient_copy definition=DA_Strate1 seed=%d strata=1 bounds=[0,%d] height_chunks=%d gap=%d imported_override=cleared"),
-        Seed, BottomChunkZ, SurfaceDefinition->StrateHeightInChunks, SettingsCopy->InterStrateGapChunks);
+        TEXT("[VoxelForgeCoreTestLayout] source=owner_asset_transient_copy definition=DA_Strate1 generator=%d seed=%d strata=1 bounds=[0,%d] height_chunks=%d compact_trace=%d gap=%d imported_override=cleared"),
+        static_cast<int32>(SurfaceDefinition->GeneratorType), Seed, BottomChunkZ,
+        SurfaceDefinition->StrateHeightInChunks,
+        bCompactTracePlan ? 1 : 0, SettingsCopy->InterStrateGapChunks);
     return true;
 }
 
@@ -16432,7 +16625,15 @@ bool RunCoreFloatingIslandActorIntegrationTest(
     }
     float StagedWalkSpeedCmPerSecond = 0.0f;
     float StagedSprintSpeedCmPerSecond = 0.0f;
-    if (!ReadStagedPlayerSpeeds(
+    if (Arguments.bCoreWorldStreamTraceOnly)
+    {
+        StagedWalkSpeedCmPerSecond = 600.0f;
+        StagedSprintSpeedCmPerSecond = 6000.0f;
+        UE_LOG(LogTemp, Display,
+            TEXT("[VoxelForgePawnSpeedFixture] source=trace_fixture_defaults walk_cm_s=%.3f sprint_cm_s=%.3f"),
+            StagedWalkSpeedCmPerSecond, StagedSprintSpeedCmPerSecond);
+    }
+    else if (!ReadStagedPlayerSpeeds(
             StagedWalkSpeedCmPerSecond, StagedSprintSpeedCmPerSecond, OutError))
     {
         return false;
@@ -17654,8 +17855,16 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
 
     float StagedWalkSpeedCmPerSecond = 0.0f;
     float StagedSprintSpeedCmPerSecond = 0.0f;
-    if (!ReadStagedPlayerSpeeds(
-            StagedWalkSpeedCmPerSecond, StagedSprintSpeedCmPerSecond, OutError))
+    if (Arguments.bCoreWorldStreamTraceOnly)
+    {
+        StagedWalkSpeedCmPerSecond = 600.0f;
+        StagedSprintSpeedCmPerSecond = 6000.0f;
+        UE_LOG(LogTemp, Display,
+            TEXT("[VoxelForgePawnSpeedFixture] source=trace_fixture_defaults walk_cm_s=%.3f sprint_cm_s=%.3f"),
+            StagedWalkSpeedCmPerSecond, StagedSprintSpeedCmPerSecond);
+    }
+    else if (!ReadStagedPlayerSpeeds(
+                 StagedWalkSpeedCmPerSecond, StagedSprintSpeedCmPerSecond, OutError))
     {
         return false;
     }
@@ -17663,8 +17872,26 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
     const int32 OwnerSeed = ResolveCoreTestWorldSeed(AuthoredSettings);
     TStrongObjectPtr<UVoxelSettings> OwnerSurfaceSettings;
     TStrongObjectPtr<UVoxelStrateDefinition> OwnerSurfaceDefinition;
-    if (!CreateLoggedOwnerSurfaceSettingsCopy(AuthoredSettings, OwnerSeed,
-            OwnerSurfaceSettings, OwnerSurfaceDefinition, OutError))
+    TArray<TStrongObjectPtr<UVoxelStrateDefinition>> OwnerPlanDefinitions;
+    if (Arguments.bOwnerFourStratePlan)
+    {
+        UVoxelSettings* PlanSettings = DuplicateObject<UVoxelSettings>(
+            AuthoredSettings, GetTransientPackage(), TEXT("VoxelForgeOwnerFourStrateTraceSettings"));
+        if (PlanSettings == nullptr)
+        {
+            OutError = TEXT("Could not duplicate owner settings for the transient four-strate Core trace.");
+            return false;
+        }
+        PlanSettings->Seed = OwnerSeed;
+        if (!ApplyOwnerFourStratePlan(PlanSettings, OwnerPlanDefinitions, true, OutError))
+        {
+            return false;
+        }
+        OwnerSurfaceSettings = TStrongObjectPtr<UVoxelSettings>(PlanSettings);
+    }
+    else if (!CreateLoggedOwnerSurfaceSettingsCopy(AuthoredSettings, OwnerSeed,
+            OwnerSurfaceSettings, OwnerSurfaceDefinition, OutError,
+            Arguments.bCoreWorldStreamTraceOnly))
     {
         return false;
     }
@@ -17822,6 +18049,25 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
             OutError = TEXT("Could not create the BuildHost stream-trace pawn.");
             return false;
         }
+        FVector StartupTraceSpawnCm = FVector::ZeroVector;
+        FString StartupTraceSpawnText;
+        if (FParse::Value(FCommandLine::Get(), TEXT("voxel.StartupTraceSpawnCm="),
+                          StartupTraceSpawnText, false))
+        {
+            TArray<FString> Components;
+            StartupTraceSpawnText.ParseIntoArray(Components, TEXT(","), true);
+            if (Components.Num() != 3
+                || !LexTryParseString(StartupTraceSpawnCm.X, *Components[0])
+                || !LexTryParseString(StartupTraceSpawnCm.Y, *Components[1])
+                || !LexTryParseString(StartupTraceSpawnCm.Z, *Components[2])
+                || !FMath::IsFinite(StartupTraceSpawnCm.X)
+                || !FMath::IsFinite(StartupTraceSpawnCm.Y)
+                || !FMath::IsFinite(StartupTraceSpawnCm.Z))
+            {
+                OutError = TEXT("voxel.StartupTraceSpawnCm must be finite X,Y,Z centimetres.");
+                return false;
+            }
+        }
         USceneComponent* PawnRoot = NewObject<USceneComponent>(PlayerPawn, NAME_None, RF_Transient);
         if (PawnRoot == nullptr)
         {
@@ -17830,7 +18076,7 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
         }
         PlayerPawn->SetRootComponent(PawnRoot);
         PawnRoot->RegisterComponent();
-        PlayerPawn->SetActorLocation(FVector::ZeroVector, false, nullptr, ETeleportType::TeleportPhysics);
+        PlayerPawn->SetActorLocation(StartupTraceSpawnCm, false, nullptr, ETeleportType::TeleportPhysics);
         PlayerController->Possess(PlayerPawn);
         if (TestWorld->GetFirstPlayerController() != PlayerController
             || PlayerController->GetPawn() != PlayerPawn)
@@ -17859,7 +18105,10 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
                 : EVoxelForgeCoreMesherRecipe::MarchingCubesV1);
         Actor->CoreClipRadius = 3;
         Actor->CoreMaxClipLevel = 8;
-        Actor->bCaptureVoxelForgeCoreHashesForValidation = true;
+        // A timing trace must use the production tile path. Core density hashing disables the
+        // native heightfield band shortcut and measures a different workload; hash validation
+        // remains enabled in the dedicated parity tests below.
+        Actor->bCaptureVoxelForgeCoreHashesForValidation = false;
         Actor->FinishSpawning(ActorTransform);
         TestWorld->InitializeActorsForPlay(FURL());
         TestWorld->BeginPlay();
@@ -17869,6 +18118,11 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
             return false;
         }
         Actor->SetActorTickEnabled(true);
+        VoxelForgeStartupTrace::RecordEvent(TEXT("trace_spawn_location"), FString::Printf(
+            TEXT("\"location_cm\":[%s,%s,%s]"),
+            *FString::SanitizeFloat(StartupTraceSpawnCm.X),
+            *FString::SanitizeFloat(StartupTraceSpawnCm.Y),
+            *FString::SanitizeFloat(StartupTraceSpawnCm.Z)));
 
         auto DesiredTilesLoaded = [](const AVoxelWorld* World)
         {
@@ -18023,6 +18277,7 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
     const double CarveBrushRadiusCoreVoxels =
         CarveBrushRadiusLegacyVoxels * static_cast<double>(VOXEL_SIZE) / CoreVoxelSizeCm;
     const int32 CollisionRadius = FMath::Clamp(AuthoredSettings->PawnCollisionRadiusChunks, 1, 4);
+    FIntVector ColdStartCollisionCenter = FIntVector::ZeroValue;
     uint64 ExpectedEditDigest = 0;
     std::array<std::uint64_t, 4> InitialAggregates{};
     std::array<std::uint64_t, 4> TravelAggregates{};
@@ -18208,10 +18463,17 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
             BiomeProbeSpanVoxels);
 
         VoxelForgeCore::World ReferenceWorld(std::move(*Snapshot));
-        const std::vector<VoxelForgeCore::TileKey> Desired = ReferenceWorld.desiredTiles({});
+        // Match the actor's cold-start fallback camera when the transient world has no pawn.
+        // Aligner la reference sur la camera de repli de l'acteur sans pawn au demarrage.
+        const VoxelForgeCore::WorldConfiguration& ReferenceConfiguration =
+            ReferenceWorld.configuration();
+        const VoxelForgeCore::Vec3d InitialCameraVoxels = ReferenceConfiguration.viewerStartFound
+            ? ReferenceConfiguration.viewerStartVoxels : VoxelForgeCore::Vec3d{};
+        const std::vector<VoxelForgeCore::TileKey> Desired =
+            ReferenceWorld.desiredTiles(InitialCameraVoxels);
         if (Desired.empty())
         {
-            OutError = TEXT("Standalone Core returned an empty reference clipmap at the origin.");
+            OutError = TEXT("Standalone Core returned an empty reference clipmap at the cold-start camera.");
             return false;
         }
         ExpectedInitialTileCount = Desired.size();
@@ -18258,7 +18520,23 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
                 UTF8_TO_TCHAR(CoreError.c_str()));
             return false;
         }
-        ReferenceWorld.retainTileRegions(Desired);
+        // Match the runtime collision probe around the same cold-start viewer tile.
+        // Reproduire la sonde de collision autour de la meme tuile de depart a froid.
+        ColdStartCollisionCenter = FIntVector(
+            FMath::FloorToInt(InitialCameraVoxels.x / 32.0),
+            FMath::FloorToInt(InitialCameraVoxels.y / 32.0),
+            FMath::FloorToInt(InitialCameraVoxels.z / 32.0));
+        std::vector<VoxelForgeCore::TileKey> ColdStartCollisionTiles;
+        ColdStartCollisionTiles.reserve(static_cast<std::size_t>(2 * CollisionRadius + 1)
+            * static_cast<std::size_t>(2 * CollisionRadius + 1)
+            * static_cast<std::size_t>(2 * CollisionRadius + 1));
+        for (int32 Z = -CollisionRadius; Z <= CollisionRadius; ++Z)
+        for (int32 Y = -CollisionRadius; Y <= CollisionRadius; ++Y)
+        for (int32 X = -CollisionRadius; X <= CollisionRadius; ++X)
+            ColdStartCollisionTiles.push_back({
+                {ColdStartCollisionCenter.X + X,
+                 ColdStartCollisionCenter.Y + Y,
+                 ColdStartCollisionCenter.Z + Z}, 0});
 
         if (Arguments.bCoreHybridCliffOnly)
         {
@@ -18332,6 +18610,47 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
             Options.mesherRecipe = VoxelForgeCore::MesherRecipe::worldAssemblerHybridV1;
         else
             Options.mesherRecipe = VoxelForgeCore::MesherRecipe::marchingCubesV1;
+
+        // Keep collision hashes outside ExpectedInitialDesiredSet; the collision cube is an
+        // additional runtime request even where it overlaps the visual clipmap.
+        // Garder les hachages de collision hors de l'ensemble visuel initial, meme s'ils se
+        // recoupent avec le clipmap.
+        std::vector<VoxelForgeCore::TileKey> RetainedReferenceTiles = Desired;
+        RetainedReferenceTiles.insert(RetainedReferenceTiles.end(),
+            ColdStartCollisionTiles.begin(), ColdStartCollisionTiles.end());
+        ReferenceWorld.retainTileRegions(RetainedReferenceTiles);
+        if (!ReferenceWorld.compileTileRegion(ColdStartCollisionTiles, 16, Scheduler, CoreError))
+        {
+            OutError = FString::Printf(TEXT("Standalone collision reference compile failed: %s"),
+                UTF8_TO_TCHAR(CoreError.c_str()));
+            return false;
+        }
+        std::size_t CollisionBodyTiles = 0;
+        for (const VoxelForgeCore::TileKey& Key : ColdStartCollisionTiles)
+        {
+            const std::optional<VoxelForgeCore::TileMesh> Mesh =
+                ReferenceWorld.generateTile(Key, Options, CoreError);
+            if (!Mesh)
+            {
+                OutError = FString::Printf(TEXT("Standalone collision tile generation failed: %s"),
+                    UTF8_TO_TCHAR(CoreError.c_str()));
+                return false;
+            }
+            FVoxelForgeCoreTileHashRecord Record;
+            Record.bEmpty = Mesh->indices.empty();
+            Record.bHasHashes = Mesh->hasDensityHash && Mesh->hasMeshHash
+                && Mesh->hasPayloadHash && Mesh->hasTopologyHash;
+            if (!Record.bEmpty) ++CollisionBodyTiles;
+            ExpectedHashes.Add(FVoxelTileKey(
+                FIntVector(Key.coordinate.x, Key.coordinate.y, Key.coordinate.z), Key.lod), Record);
+        }
+        UE_LOG(LogTemp, Display,
+            TEXT("[VoxelForgeCoreWorldTest] standalone_collision_reference=1 center=(%d,%d,%d) tiles=%d body=%llu no_body=%llu"),
+            ColdStartCollisionCenter.X, ColdStartCollisionCenter.Y, ColdStartCollisionCenter.Z,
+            static_cast<int32>(ColdStartCollisionTiles.size()),
+            static_cast<unsigned long long>(CollisionBodyTiles),
+            static_cast<unsigned long long>(ColdStartCollisionTiles.size() - CollisionBodyTiles));
+
         std::vector<FStandaloneCoreAdapterTileHashes> AggregateRows;
         AggregateRows.reserve(Desired.size());
         bool bFoundCarveVertex = false;
@@ -19367,7 +19686,7 @@ bool RunCoreWorldActorIntegrationTest(const FExploreArguments& Arguments, FStrin
     for (int32 Y = -CollisionRadius; Y <= CollisionRadius; ++Y)
     for (int32 X = -CollisionRadius; X <= CollisionRadius; ++X)
     {
-        const FVoxelTileKey Key(FIntVector(X, Y, Z), 0);
+        const FVoxelTileKey Key(ColdStartCollisionCenter + FIntVector(X, Y, Z), 0);
         ExpectedCollisionSet.Add(Key);
         const FVoxelForgeCoreTileHashRecord* Record = ExpectedHashes.Find(Key);
         if (Record == nullptr)
@@ -21361,6 +21680,44 @@ int32 RunBatch(const FString& Params)
 
 int32 UVoxelForgeExploreCommandlet::Main(const FString& Params)
 {
+    if (FParse::Param(*Params, TEXT("coreassetupgradeaudit")))
+    {
+        // Load the untouched BuildHost copies and emit their in-memory conversions; never save a package.
+        // Charge les copies BuildHost intactes et affiche les conversions en memoire, sans sauver de package.
+        UVoxelSettings* SettingsAsset = LoadObject<UVoxelSettings>(nullptr,
+            TEXT("/Game/VoxelForge/DA_Settings.DA_Settings"));
+        if (SettingsAsset == nullptr)
+        {
+            UE_LOG(LogTemp, Error, TEXT("[VoxelForgeAssetMigrationAudit] missing DA_Settings copy"));
+            return 2;
+        }
+        UE_LOG(LogTemp, Display,
+            TEXT("[VoxelForgeAssetMigrationAudit] asset=%s old_gap_chunks=%d new_gap_m=%.6f layout_chunk_m=%.6f"),
+            *SettingsAsset->GetPathName(), SettingsAsset->InterStrateGapChunks,
+            SettingsAsset->InterStrateGapMeters, SettingsAsset->StrateLayoutChunkSizeMeters);
+
+        const TCHAR* StratePaths[] = {
+            TEXT("/Game/VoxelForge/DA_Strate1.DA_Strate1"),
+            TEXT("/Game/VoxelForge/DA_Strate2.DA_Strate2"),
+            TEXT("/Game/VoxelForge/DA_Strate3.DA_Strate3"),
+            TEXT("/Game/VoxelForge/DA_Strate4.DA_Strate4")
+        };
+        for (const TCHAR* Path : StratePaths)
+        {
+            UVoxelStrateDefinition* Definition = LoadObject<UVoxelStrateDefinition>(nullptr, Path);
+            if (Definition == nullptr)
+            {
+                UE_LOG(LogTemp, Error, TEXT("[VoxelForgeAssetMigrationAudit] missing strate copy %s"), Path);
+                return 2;
+            }
+            UE_LOG(LogTemp, Display,
+                TEXT("[VoxelForgeAssetMigrationAudit] asset=%s old_height_chunks=%d new_height_m=%.6f old_transition_chunks=%d new_transition_m=%.6f"),
+                *Definition->GetPathName(), Definition->StrateHeightInChunks,
+                Definition->StrateHeightMeters, Definition->TransitionBlendChunks,
+                Definition->TransitionWidthMeters);
+        }
+        return 0;
+    }
     if (FParse::Param(*Params, TEXT("step2f")))
     {
         return RunStep2f(Params);

Standalone/BuildLinux.sh

@@ -7,10 +7,14 @@ fi
 
 SCRIPT_DIR="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
 ROOT="$SCRIPT_DIR"
+PROJECT_ROOT="$(cd -- "$ROOT/.." && pwd)"
+VERIFY_DIR="$ROOT/Tools/verify"
 COMPILER="clang++-19"
 VARIANT="clang19"
 FP_CONTRACT="off"
 JOBS=12
+SANITIZERS=""
+EXCLUDE_UNSIGNED_OVERFLOW=0
 
 while (($#)); do
     case "$1" in
@@ -18,6 +22,8 @@ while (($#)); do
         --variant=*) VARIANT="${1#*=}" ;;
         --fp-contract=*) FP_CONTRACT="${1#*=}" ;;
         --jobs=*) JOBS="${1#*=}" ;;
+        --sanitize=*) SANITIZERS="${1#*=}" ;;
+        --exclude-unsigned-integer-overflow) EXCLUDE_UNSIGNED_OVERFLOW=1 ;;
         *) printf 'Unknown build option: %s\n' "$1" >&2; exit 2 ;;
     esac
     shift
@@ -41,6 +47,15 @@ BIN_DIR="${VOXELFORGE_BIN_DIR:-$ROOT/bin/linux}"
 BUILD_DIR="$BUILD_ROOT/linux-$VARIANT"
 mkdir -p "$BUILD_DIR/wrappers" "$BUILD_DIR/objects" "$BIN_DIR"
 
+STAMP_HELPER="$VERIFY_DIR/source_stamp.py"
+STAMP_ARGS=()
+if [[ "${VOXELFORGE_INCLUDE_UNREAL_ADAPTER:-0}" == "1" ]]; then
+    STAMP_ARGS+=(--include-unreal-adapter)
+fi
+SOURCE_STAMP="$(python3 -B "$STAMP_HELPER" stamp --root "$PROJECT_ROOT" "${STAMP_ARGS[@]}")"
+python3 -B "$STAMP_HELPER" write-manifest --root "$PROJECT_ROOT" --output "$BUILD_DIR/source-manifest.txt" "${STAMP_ARGS[@]}" >/dev/null
+printf 'Source stamp: %s\n' "$SOURCE_STAMP"
+
 INCLUDES=(
     "-I$ROOT/Core/include"
     "-I$ROOT/Core/src"
@@ -49,13 +64,28 @@ INCLUDES=(
     "-I$ROOT/Source/VoxelForge/Public"
     "-I$ROOT/Source/VoxelForge/Private"
 )
+OPT_LEVEL=-O2
+LINK_FLAGS=()
+if [[ -n "$SANITIZERS" ]]; then
+    OPT_LEVEL=-O1
+    LINK_FLAGS+=("-fsanitize=$SANITIZERS" -fno-sanitize-recover=undefined)
+    if ((EXCLUDE_UNSIGNED_OVERFLOW)); then
+        LINK_FLAGS+=(-fno-sanitize=unsigned-integer-overflow)
+    fi
+fi
+
 FLAGS=(
-    -std=c++20 -O2 -mavx2 -mfma -fno-fast-math
+    -std=c++20 "$OPT_LEVEL" -mavx2 -mfma -fno-fast-math
     -fexceptions -pthread "${INCLUDES[@]}"
+    "-DVOXELFORGE_SOURCE_STAMP=\"$SOURCE_STAMP\""
 )
+FLAGS+=("${LINK_FLAGS[@]}")
 if [[ "$FP_CONTRACT" != "default" ]]; then
     FLAGS+=("-ffp-contract=$FP_CONTRACT")
 fi
+if [[ "${VOXELFORGE_PROFILE_LEGACY_TERMS:-0}" == "1" ]]; then
+    FLAGS+=(-DVF_L76_PROFILE_LEGACY_TERMS=1)
+fi
 if [[ "$($COMPILER --version | head -n 1)" == *clang* ]]; then
     FLAGS+=(-Wno-c++11-narrowing)
 else
@@ -119,11 +149,19 @@ PIDS=()
 CORE_LIBRARY="$BUILD_DIR/libVoxelForgeCore.a"
 "$(command -v ar)" rcs "$CORE_LIBRARY" "${CORE_OBJECTS[@]}"
 OUTPUT="$BIN_DIR/VoxelForgeCoreHeadless-$VARIANT"
-"$COMPILER" -pthread "${LEGACY_OBJECTS[@]}" "$CORE_LIBRARY" -o "$OUTPUT"
+"$COMPILER" -pthread "${LINK_FLAGS[@]}" "${LEGACY_OBJECTS[@]}" "$CORE_LIBRARY" -o "$OUTPUT"
 CAPTURE_OUTPUT="$BIN_DIR/VoxelForgeOffscreenCapture-$VARIANT"
 "$COMPILER" -std=c++20 -O2 -fno-fast-math -pthread \
+    "-DVOXELFORGE_SOURCE_STAMP=\"$SOURCE_STAMP\"" -I"$ROOT/Source" \
     "$ROOT/Source/LinuxOffscreenCapture.cpp" -o "$CAPTURE_OUTPUT" \
     $(pkg-config --cflags --libs egl glesv2 libpng)
+
+POST_BUILD_STAMP="$(python3 -B "$STAMP_HELPER" stamp --root "$PROJECT_ROOT" "${STAMP_ARGS[@]}")"
+if [[ "$POST_BUILD_STAMP" != "$SOURCE_STAMP" ]]; then
+    printf 'Source changed during build: before=%s after=%s\n' "$SOURCE_STAMP" "$POST_BUILD_STAMP" >&2
+    exit 1
+fi
 printf 'Built Core library: %s\nBuilt headless benchmark: %s\n' "$CORE_LIBRARY" "$OUTPUT"
 printf 'Built EGL offscreen capture: %s\n' "$CAPTURE_OUTPUT"
-printf 'Compiler: %s | variant: %s | fp-contract: %s | jobs: %s\n' "$COMPILER" "$VARIANT" "$FP_CONTRACT" "$JOBS"
+printf 'Compiler: %s | variant: %s | fp-contract: %s | sanitizers: %s | jobs: %s\n' \
+    "$COMPILER" "$VARIANT" "$FP_CONTRACT" "${SANITIZERS:-off}" "$JOBS"

Standalone/Compat/AssetRegistry/AssetData.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <AssetRegistry/AssetData.h>
+#endif

Standalone/Compat/AssetRegistry/AssetRegistryModule.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <AssetRegistry/AssetRegistryModule.h>
+#endif

Standalone/Compat/Async/ParallelFor.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Async/ParallelFor.h>
+#endif

Standalone/Compat/CoreMinimal.h

@@ -1,5 +1,10 @@
 #pragma once
 
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <CoreMinimal.h>
+#else
+
 // Deliberately small UE-style surface used by the copied VoxelForge CPU sources.
 // This is a value/container compatibility layer; it does not start or link Unreal.
 #include <algorithm>
@@ -45,6 +50,9 @@
 #define GENERATED_UCLASS_BODY()
 #define VOXELFORGE_API
 #define FORCEINLINE inline
+#ifdef WITH_EDITOR
+#undef WITH_EDITOR
+#endif
 #define WITH_EDITOR 0
 #define TRACE_CPUPROFILER_EVENT_SCOPE(...)
 #define PRAGMA_DISABLE_SHADOW_VARIABLE_WARNINGS
@@ -705,3 +713,4 @@ struct FParse
 struct FCrc { static uint32 MemCrc32(const void*Data,int32 Length,uint32 Crc=0){const auto*P=static_cast<const uint8*>(Data);uint32 V=~Crc;for(int32 I=0;I<Length;++I){V^=P[I];for(int J=0;J<8;++J)V=(V>>1)^(0xEDB88320u&static_cast<uint32>(-static_cast<int32>(V&1)));}return ~V;} static uint32 StrCrc32(const char*S,uint32 Crc=0){return MemCrc32(S,static_cast<int32>(std::strlen(S)),Crc);} };
 template<class T> using TAtomic = std::atomic<T>;
 class FThreadSafeCounter { public:int32 Increment(){return ++Value;}int32 Decrement(){return --Value;}int32 GetValue()const{return Value.load();}void Reset(){Value.store(0);}private:std::atomic<int32>Value{0};};
+#endif

Standalone/Compat/Dom/JsonObject.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Dom/JsonObject.h>
+#endif

Standalone/Compat/Dom/JsonValue.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Dom/JsonValue.h>
+#endif

Standalone/Compat/Engine/DataAsset.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Engine/DataAsset.h>
+#endif

Standalone/Compat/GameplayTagContainer.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <GameplayTagContainer.h>
+#endif

Standalone/Compat/HAL/CriticalSection.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <HAL/CriticalSection.h>
+#endif

Standalone/Compat/HAL/Event.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <HAL/Event.h>
+#endif

Standalone/Compat/HAL/FileManager.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <HAL/FileManager.h>
+#endif

Standalone/Compat/HAL/IConsoleManager.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <HAL/IConsoleManager.h>
+#endif

Standalone/Compat/HAL/PlatformProcess.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <HAL/PlatformProcess.h>
+#endif

Standalone/Compat/HAL/PlatformTime.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <HAL/PlatformTime.h>
+#endif

Standalone/Compat/Json.h

@@ -1,5 +1,10 @@
 #pragma once
 
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Json.h>
+#else
+
 #include <charconv>
 #include <cmath>
 #include <cstddef>
@@ -162,3 +167,4 @@ namespace VFJson
         return Parser(std::move(Text)).Parse(Out, Error);
     }
 }
+#endif

Standalone/Compat/Math/RandomStream.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Math/RandomStream.h>
+#endif

Standalone/Compat/Misc/CommandLine.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Misc/CommandLine.h>
+#endif

Standalone/Compat/Misc/Crc.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Misc/Crc.h>
+#endif

Standalone/Compat/Misc/FileHelper.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Misc/FileHelper.h>
+#endif

Standalone/Compat/Misc/Parse.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Misc/Parse.h>
+#endif

Standalone/Compat/Misc/Paths.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Misc/Paths.h>
+#endif

Standalone/Compat/Misc/ScopeLock.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Misc/ScopeLock.h>
+#endif

Standalone/Compat/Misc/ScopeRWLock.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Misc/ScopeRWLock.h>
+#endif

Standalone/Compat/Misc/SecureHash.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Misc/SecureHash.h>
+#endif

Standalone/Compat/Modules/ModuleManager.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Modules/ModuleManager.h>
+#endif

Standalone/Compat/ProfilingDebugging/CpuProfilerTrace.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <ProfilingDebugging/CpuProfilerTrace.h>
+#endif

Standalone/Compat/Serialization/CustomVersion.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Serialization/CustomVersion.h>
+#endif

Standalone/Compat/Serialization/JsonSerializer.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Serialization/JsonSerializer.h>
+#endif

Standalone/Compat/Serialization/JsonWriter.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Serialization/JsonWriter.h>
+#endif

Standalone/Compat/Stats/Stats.h

@@ -1,4 +1,9 @@
 #pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Stats/Stats.h>
+#else
 #define STATCAT_Advanced 0
 #define DECLARE_STATS_GROUP(Name,Group,Category) constexpr int32 Group=0
 #define DECLARE_DWORD_COUNTER_STAT_EXTERN(Name,Stat,Group,Api) constexpr int32 Stat=0
@@ -8,3 +13,4 @@
 #define SET_DWORD_STAT(Stat,Value) ((void)0)
 #define SCOPE_CYCLE_COUNTER(Stat) ((void)0)
 #define QUICK_SCOPE_CYCLE_COUNTER(Stat) ((void)0)
+#endif

Standalone/Compat/Templates/SubclassOf.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Templates/SubclassOf.h>
+#endif

Standalone/Compat/Templates/UniquePtr.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <Templates/UniquePtr.h>
+#endif

Standalone/Compat/UObject/EnumProperty.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <UObject/EnumProperty.h>
+#endif

Standalone/Compat/UObject/FieldIterator.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <UObject/FieldIterator.h>
+#endif

Standalone/Compat/UObject/Object.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <UObject/Object.h>
+#endif

Standalone/Compat/UObject/UObjectGlobals.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <UObject/UObjectGlobals.h>
+#endif

Standalone/Compat/UObject/UnrealType.h

@@ -1 +1,6 @@
-#pragma once
+#pragma once
+
+#if defined(VFCORE_COMPAT_FORWARD_HEADERS) && !defined(VFCORE_USE_COMPAT) \
+	&& (defined(__clang__) || defined(__GNUC__))
+#include_next <UObject/UnrealType.h>
+#endif

Standalone/Core/include/VoxelForgeCore/CpuCycleCounter.h

@@ -0,0 +1,55 @@
+#pragma once
+
+#include <cstdint>
+#include <algorithm>
+#include <limits>
+
+#if defined(_MSC_VER) && (defined(_M_IX86) || defined(_M_X64))
+#include <intrin.h>
+#elif defined(__i386__) || defined(__x86_64__)
+#include <immintrin.h>
+#endif
+
+namespace VoxelForgeCoreShared
+{
+    inline std::uint64_t ReadCpuCycles() noexcept
+    {
+#if defined(_MSC_VER) && (defined(_M_IX86) || defined(_M_X64))
+        _mm_lfence();
+        const std::uint64_t value=__rdtsc();
+        _mm_lfence();
+        return value;
+#elif defined(__i386__) || defined(__x86_64__)
+        _mm_lfence();
+        const std::uint64_t value=__rdtsc();
+        _mm_lfence();
+        return value;
+#else
+        return 0;
+#endif
+    }
+
+    inline std::uint64_t CpuCycleReadPairOverhead() noexcept
+    {
+        static const std::uint64_t overhead=[]()
+        {
+            std::uint64_t minimum=std::numeric_limits<std::uint64_t>::max();
+            for(unsigned i=0;i<64;++i)
+            {
+                const std::uint64_t start=ReadCpuCycles();
+                const std::uint64_t end=ReadCpuCycles();
+                minimum=std::min(minimum,end-start);
+            }
+            return minimum==std::numeric_limits<std::uint64_t>::max()?0:minimum;
+        }();
+        return overhead;
+    }
+
+    inline std::uint64_t AdjustedCpuCycleDelta(std::uint64_t start,
+        std::uint64_t end) noexcept
+    {
+        const std::uint64_t delta=end-start;
+        const std::uint64_t overhead=CpuCycleReadPairOverhead();
+        return delta>overhead?delta-overhead:0;
+    }
+}

Standalone/Core/include/VoxelForgeCore/FloatingIslandInstrumentation.h

@@ -0,0 +1,201 @@
+#pragma once
+
+#include "VoxelForgeCore/CpuCycleCounter.h"
+
+#include <array>
+#include <chrono>
+#include <cstddef>
+#include <cstdint>
+
+namespace VoxelForgeCore::floating_island_detail
+{
+    enum class EIslandFieldCaller : std::uint8_t
+    {
+        GridFill=0,Skirt=1,Boundary=2,PassageFilter=3,Other=4,Count=5
+    };
+
+    enum class EIslandAttributionBucket : std::uint8_t
+    {
+        Field=0,Island=1,Root=2,Connector=3,Helix=4,Column=5,
+        LocalProbe=6,SharedCache=7,MouthFilter=8,Boundary=9,CallerGrid=10,
+        CallerSkirt=11,CallerBoundary=12,CallerPassageFilter=13,CallerOther=14,
+        Count=15
+    };
+
+    struct FIslandFieldAttributionInstrumentation
+    {
+        static constexpr std::uint64_t SampleMask=255;
+        std::array<std::uint64_t,static_cast<std::size_t>(EIslandFieldCaller::Count)> sampledFieldCalls{};
+        std::array<std::uint64_t,static_cast<std::size_t>(EIslandFieldCaller::Count)> fieldCycles{};
+        std::array<std::uint64_t,static_cast<std::size_t>(EIslandFieldCaller::Count)> fieldNanoseconds{};
+        std::array<std::uint64_t,static_cast<std::size_t>(EIslandFieldCaller::Count)> sampledNativeCalls{};
+        std::array<std::uint64_t,static_cast<std::size_t>(EIslandFieldCaller::Count)> nativeCycles{};
+        std::array<std::uint64_t,static_cast<std::size_t>(EIslandFieldCaller::Count)> nativeNanoseconds{};
+        std::array<std::uint64_t,static_cast<std::size_t>(EIslandAttributionBucket::Count)> exclusiveCycles{};
+        std::array<std::uint64_t,static_cast<std::size_t>(EIslandAttributionBucket::Count)> exclusiveNanoseconds{};
+        std::array<std::uint64_t,static_cast<std::size_t>(EIslandAttributionBucket::Count)> scopeSamples{};
+        std::uint64_t traceSampledMisses=0,traceSeenBefore=0,traceEvictions=0,
+            traceReusedEvictions=0;
+        std::array<std::uint64_t,8> traceSet{};
+        std::array<std::int64_t,8> traceX{},traceY{},traceEvictedX{},traceEvictedY{};
+        std::array<std::uint64_t,8> traceIsland{},traceEvictedIsland{};
+        std::array<std::uint8_t,8> traceFlags{};
+        std::size_t traceCount=0;
+    };
+
+    inline FIslandFieldAttributionInstrumentation*& ActiveIslandFieldAttribution() noexcept
+    {
+        static thread_local FIslandFieldAttributionInstrumentation* active=nullptr;
+        return active;
+    }
+
+    inline FIslandFieldAttributionInstrumentation* SetActiveIslandFieldAttribution(
+        FIslandFieldAttributionInstrumentation* value) noexcept
+    {
+        auto* previous=ActiveIslandFieldAttribution();
+        ActiveIslandFieldAttribution()=value;
+        return previous;
+    }
+
+    inline EIslandFieldCaller& ActiveIslandFieldCaller() noexcept
+    {
+        static thread_local EIslandFieldCaller caller=EIslandFieldCaller::Other;
+        return caller;
+    }
+
+    struct FScopedIslandFieldCaller
+    {
+        explicit FScopedIslandFieldCaller(EIslandFieldCaller value) noexcept
+            :previous(ActiveIslandFieldCaller()),enabled(ActiveIslandFieldAttribution()!=nullptr)
+        {if(enabled)ActiveIslandFieldCaller()=value;}
+        ~FScopedIslandFieldCaller(){if(enabled)ActiveIslandFieldCaller()=previous;}
+        EIslandFieldCaller previous;
+        bool enabled=false;
+    };
+
+    inline std::array<std::uint64_t,
+        static_cast<std::size_t>(EIslandAttributionBucket::Count)>&
+        IslandComponentSampleSequence() noexcept
+    {
+        static thread_local std::array<std::uint64_t,
+            static_cast<std::size_t>(EIslandAttributionBucket::Count)> sequence{};
+        return sequence;
+    }
+
+    inline std::array<std::uint64_t,
+        static_cast<std::size_t>(EIslandFieldCaller::Count)>&
+        IslandFieldSampleSequence() noexcept
+    {
+        static thread_local std::array<std::uint64_t,
+            static_cast<std::size_t>(EIslandFieldCaller::Count)> sequence{};
+        return sequence;
+    }
+
+    inline std::array<std::uint64_t,
+        static_cast<std::size_t>(EIslandFieldCaller::Count)>&
+        IslandNativeSampleSequence() noexcept
+    {
+        static thread_local std::array<std::uint64_t,
+            static_cast<std::size_t>(EIslandFieldCaller::Count)> sequence{};
+        return sequence;
+    }
+
+    struct FScopedIslandAttributionTimer
+    {
+        explicit FScopedIslandAttributionTimer(EIslandAttributionBucket bucket) noexcept
+            :metrics(ActiveIslandFieldAttribution()),bucketIndex(static_cast<std::size_t>(bucket))
+        {
+            if(!metrics)return;
+            if(bucketIndex==static_cast<std::size_t>(EIslandAttributionBucket::Field))
+            {
+                const auto callerIndex=static_cast<std::size_t>(ActiveIslandFieldCaller());
+                const auto calls=++IslandFieldSampleSequence()[callerIndex];
+                const std::uint64_t phase=(callerIndex*43u+17u)
+                    &FIslandFieldAttributionInstrumentation::SampleMask;
+                sampled=(((calls+phase)&FIslandFieldAttributionInstrumentation::SampleMask)==0);
+            }
+            else
+            {
+                auto& calls=IslandComponentSampleSequence()[bucketIndex];
+                ++calls;
+                const std::uint64_t phase=(static_cast<std::uint64_t>(bucketIndex)*29u+17u)
+                    &FIslandFieldAttributionInstrumentation::SampleMask;
+                sampled=(((calls+phase)&FIslandFieldAttributionInstrumentation::SampleMask)==0);
+            }
+            if(sampled)
+            {
+                start=VoxelForgeCoreShared::ReadCpuCycles();
+                wallStart=std::chrono::steady_clock::now();
+            }
+        }
+        ~FScopedIslandAttributionTimer(){Stop();}
+        std::uint64_t Stop() noexcept
+        {
+            if(!sampled)return 0;
+            sampled=false;
+            const std::uint64_t raw=VoxelForgeCoreShared::ReadCpuCycles()-start;
+            const std::uint64_t overhead=VoxelForgeCoreShared::CpuCycleReadPairOverhead();
+            const std::uint64_t cycles=raw>overhead?raw-overhead:0;
+            const auto elapsed=std::chrono::duration_cast<std::chrono::nanoseconds>(
+                std::chrono::steady_clock::now()-wallStart).count();
+            metrics->exclusiveCycles[bucketIndex]+=cycles;
+            metrics->exclusiveNanoseconds[bucketIndex]+=elapsed>0
+                ?static_cast<std::uint64_t>(elapsed):0;
+            ++metrics->scopeSamples[bucketIndex];
+            if(bucketIndex==static_cast<std::size_t>(EIslandAttributionBucket::Field))
+            {
+                const std::size_t callerIndex=static_cast<std::size_t>(ActiveIslandFieldCaller());
+                metrics->fieldCycles[callerIndex]+=cycles;
+                metrics->fieldNanoseconds[callerIndex]+=elapsed>0
+                    ?static_cast<std::uint64_t>(elapsed):0;
+                ++metrics->sampledFieldCalls[callerIndex];
+            }
+            return cycles;
+        }
+        FIslandFieldAttributionInstrumentation* metrics=nullptr;
+        std::size_t bucketIndex=0;
+        std::uint64_t start=0;
+        std::chrono::steady_clock::time_point wallStart{};
+        bool sampled=false;
+    };
+
+    struct FScopedIslandAttributionSample
+    {
+        explicit FScopedIslandAttributionSample() noexcept
+        {
+            auto* attribution=ActiveIslandFieldAttribution();
+            if(!attribution)return;
+            const auto caller=ActiveIslandFieldCaller();
+            const std::size_t callerIndex=static_cast<std::size_t>(caller);
+            const std::uint64_t sequence=++IslandNativeSampleSequence()[callerIndex];
+            const std::uint64_t phase=(callerIndex*43u+93u)
+                &FIslandFieldAttributionInstrumentation::SampleMask;
+            if(((sequence+phase)&FIslandFieldAttributionInstrumentation::SampleMask)!=0)return;
+            sampledAttribution=attribution;
+            sampledCaller=caller;
+            sampled=true;
+            start=VoxelForgeCoreShared::ReadCpuCycles();
+            wallStart=std::chrono::steady_clock::now();
+            ++attribution->sampledNativeCalls[callerIndex];
+        }
+        ~FScopedIslandAttributionSample()
+        {
+            if(!sampled)return;
+            const std::uint64_t raw=VoxelForgeCoreShared::ReadCpuCycles()-start;
+            const std::uint64_t overhead=VoxelForgeCoreShared::CpuCycleReadPairOverhead();
+            const std::uint64_t duration=raw>overhead?raw-overhead:0;
+            const auto elapsed=std::chrono::duration_cast<std::chrono::nanoseconds>(
+                std::chrono::steady_clock::now()-wallStart).count();
+            const std::size_t callerIndex=static_cast<std::size_t>(sampledCaller);
+            sampledAttribution->nativeCycles[callerIndex]+=duration;
+            sampledAttribution->nativeNanoseconds[callerIndex]+=elapsed>0
+                ?static_cast<std::uint64_t>(elapsed):0;
+        }
+        FIslandFieldAttributionInstrumentation* sampledAttribution=nullptr;
+        EIslandFieldCaller sampledCaller=EIslandFieldCaller::Other;
+        std::uint64_t start=0;
+        std::chrono::steady_clock::time_point wallStart{};
+        bool sampled=false;
+    };
+
+}

Standalone/Core/include/VoxelForgeCore/SharedColumnCache.h

@@ -1,9 +1,12 @@
 #pragma once
 
+#include "VoxelForgeCore/CpuCycleCounter.h"
+
 #include <array>
 #include <atomic>
 #include <cstddef>
 #include <cstdint>
+#include <chrono>
 #include <cstring>
 #include <memory>
 #include <thread>
@@ -12,6 +15,23 @@
 
 namespace VoxelForgeCoreShared
 {
+    struct FColumnCacheMetrics
+    {
+        std::uint64_t hits = 0;
+        std::uint64_t misses = 0;
+        std::uint64_t computes = 0;
+        std::uint64_t conflictReplacements = 0;
+        std::uint64_t lockWaitNanoseconds = 0;
+        std::uint64_t sampledInitialReadCycles = 0;
+        std::uint64_t sampledInitialReads = 0;
+        std::uint64_t sampledLockedReadCycles = 0;
+        std::uint64_t sampledLockedReads = 0;
+        std::uint64_t sampledLockCycles = 0;
+        std::uint64_t sampledLocks = 0;
+        std::uint64_t sampledBuildCycles = 0;
+        std::uint64_t sampledBuilds = 0;
+    };
+
     // Exact input identity for a pure XY column value. LOD is deliberately not part of this key:
     // the same recipe/plan column has the same bits at every sampling step.
     struct FColumnCacheKey
@@ -69,13 +89,28 @@ namespace VoxelForgeCoreShared
 
         struct FSpinGuard
         {
-            explicit FSpinGuard(std::atomic_flag& value) : Flag(value)
+            explicit FSpinGuard(std::atomic_flag& value, FColumnCacheMetrics* metrics,
+                bool sampleCycles)
+                : Flag(value), Metrics(metrics)
             {
+                const auto started = Metrics ? std::chrono::steady_clock::now()
+                    : std::chrono::steady_clock::time_point{};
+                const std::uint64_t cycleStart=sampleCycles?ReadCpuCycles():0;
                 while (Flag.test_and_set(std::memory_order_acquire))
                     std::this_thread::yield();
+                if (Metrics)
+                    Metrics->lockWaitNanoseconds += static_cast<std::uint64_t>(
+                        std::chrono::duration_cast<std::chrono::nanoseconds>(
+                            std::chrono::steady_clock::now() - started).count());
+                if(sampleCycles)
+                {
+                    Metrics->sampledLockCycles+=AdjustedCpuCycleDelta(cycleStart,ReadCpuCycles());
+                    ++Metrics->sampledLocks;
+                }
             }
             ~FSpinGuard() { Flag.clear(std::memory_order_release); }
             std::atomic_flag& Flag;
+            FColumnCacheMetrics* Metrics;
         };
 
     public:
@@ -94,7 +129,7 @@ namespace VoxelForgeCoreShared
 
         template <typename TFactory>
         TValue getOrCompute(const FColumnCacheKey& key, TFactory&& factory,
-            bool& computed)
+            bool& computed, FColumnCacheMetrics* metrics = nullptr)
         {
             computed = false;
             const FKeyWords keyWords = key.words();
@@ -102,13 +137,47 @@ namespace VoxelForgeCoreShared
             const std::size_t setIndex = static_cast<std::size_t>(tag) & (SetCount - 1);
             FSet& set = Sets[setIndex];
             TValue value{};
-            if (TryReadSet(set, keyWords, tag, value)) return value;
+            static thread_local std::uint64_t timingSequence=0;
+            const bool sampleCycles=metrics&&((++timingSequence&127u)==0);
+            const std::uint64_t initialReadStart=sampleCycles?ReadCpuCycles():0;
+            const bool initialHit=TryReadSet(set, keyWords, tag, value);
+            if(sampleCycles)
+            {
+                metrics->sampledInitialReadCycles+=AdjustedCpuCycleDelta(
+                    initialReadStart,ReadCpuCycles());
+                ++metrics->sampledInitialReads;
+            }
+            if (initialHit)
+            {
+                if (metrics) ++metrics->hits;
+                return value;
+            }
+            if (metrics) ++metrics->misses;
 
-            FSpinGuard lock(set.Writer);
-            if (TryReadSet(set, keyWords, tag, value)) return value;
+            FSpinGuard lock(set.Writer, metrics,sampleCycles);
+            const std::uint64_t lockedReadStart=sampleCycles?ReadCpuCycles():0;
+            const bool lockedHit=TryReadSet(set, keyWords, tag, value);
+            if(sampleCycles)
+            {
+                metrics->sampledLockedReadCycles+=AdjustedCpuCycleDelta(
+                    lockedReadStart,ReadCpuCycles());
+                ++metrics->sampledLockedReads;
+            }
+            if (lockedHit)
+            {
+                if (metrics) ++metrics->hits;
+                return value;
+            }
 
+            const std::uint64_t buildStart=sampleCycles?ReadCpuCycles():0;
             value = std::forward<TFactory>(factory)();
+            if(sampleCycles)
+            {
+                metrics->sampledBuildCycles+=AdjustedCpuCycleDelta(buildStart,ReadCpuCycles());
+                ++metrics->sampledBuilds;
+            }
             computed = true;
+            if (metrics) ++metrics->computes;
             FValueWords valueWords{};
             std::memcpy(valueWords.data(), &value, sizeof(TValue));
 
@@ -118,6 +187,7 @@ namespace VoxelForgeCoreShared
                 { replacement = way; break; }
             if (replacement == Ways)
             {
+                if (metrics) ++metrics->conflictReplacements;
                 replacement = set.NextWay;
                 set.NextWay = static_cast<std::uint8_t>((set.NextWay + 1) % Ways);
             }

Standalone/Core/include/VoxelForgeCore/VoxelForgeCore.h

@@ -81,6 +81,9 @@ namespace VoxelForgeCore
         Vec3d normal;
         Vec2f uv;
         ColorRgba8 color;
+        std::uint16_t hostMaterialId = 1;
+        std::array<std::uint16_t, 2> resourceMaterialIds{};
+        std::array<std::uint16_t, 2> resourceWeightsQ16{};
     };
 
     struct MeshGroups
@@ -128,14 +131,63 @@ namespace VoxelForgeCore
         std::uint64_t mixedBoxes = 0;
         std::uint64_t unknownBoxes = 0;
         std::uint64_t fieldCalls = 0;
+        // Opt-in composer diagnostics. These stay zero during ordinary generation.
+        bool passageComposerProfiled = false;
+        std::uint64_t passageTileFeatureCount = 0;
+        std::uint64_t passageTileRouteSegmentCandidates = 0;
+        std::uint64_t passageTileMouthSegmentCandidates = 0;
+        std::uint64_t passageComposerQueries = 0;
+        std::uint64_t passageIterations = 0;
+        std::uint64_t passageUpperMouthFilterChecks = 0;
+        std::uint64_t passageColumnCandidates = 0;
+        std::uint64_t passageColumnDistanceCalls = 0;
+        std::uint64_t passageNegativeBoundChecks = 0;
+        std::uint64_t passageNegativeBoundRejects = 0;
+        std::uint64_t passagePositiveBoundChecks = 0;
+        std::uint64_t passagePositiveBoundRejects = 0;
+        std::uint64_t passageCarveSegmentVisits = 0;
+        std::uint64_t passageSmoothCarveJoins = 0;
+        std::uint64_t passageSupportSegmentVisits = 0;
+        std::uint64_t passageSmoothSupportJoins = 0;
+        std::uint64_t passageSupportCapsuleChecks = 0;
+        std::uint64_t passageLaterBoreChecks = 0;
+        std::uint64_t passageOtherCapsuleChecks = 0;
+        std::uint64_t passageMouthSupportCalls = 0;
+        std::uint64_t passageMouthRouteSegmentChecks = 0;
+        std::uint64_t passageReliefFieldCalls = 0;
+        std::uint64_t passageSmoothstepEvaluations = 0;
         std::uint64_t floatFieldCalls = 0;
         std::uint64_t latticeFieldCalls = 0;
         std::uint64_t unclampedFieldCalls = 0;
+        std::uint64_t densityPointCalls = 0;
+        std::uint64_t densityFloatPointCalls = 0;
+        std::uint64_t densityLatticePointCalls = 0;
+        std::uint64_t densityUnclampedPointCalls = 0;
+        std::uint64_t densityX8PointCalls = 0;
+        std::uint64_t densityFieldEvalNanoseconds = 0;
+        std::uint64_t densityFieldEvalSamplePoints = 0;
+        std::uint64_t legacyFieldEvalCalls = 0;
+        std::array<std::uint64_t,9> legacyFieldTermCalls{};
+        std::array<std::uint64_t,9> legacyFieldTermNanoseconds{};
+        std::array<std::uint64_t,9> legacyFieldTermTimedCalls{};
+        std::uint64_t legacyPrimitiveCandidateVisits = 0;
+        std::uint64_t legacyPrimitiveDistanceEvaluations = 0;
+        std::uint64_t legacySmoothMinCalls = 0;
+        std::uint64_t legacySmoothMinNanoseconds = 0;
+        std::uint64_t legacySmoothMinTimedCalls = 0;
         std::uint64_t columnCacheHits = 0;
         std::uint64_t columnCacheMisses = 0;
         std::uint64_t columnCacheConflictMisses = 0;
         std::uint64_t sharedColumnCacheHits = 0;
         std::uint64_t columnEvaluations = 0;
+        std::uint64_t islandLocalCacheHits = 0;
+        std::uint64_t islandLocalCacheMisses = 0;
+        std::uint64_t islandLocalCacheConflictReplacements = 0;
+        std::uint64_t islandSharedCacheHits = 0;
+        std::uint64_t islandSharedCacheMisses = 0;
+        std::uint64_t islandSharedCacheComputes = 0;
+        std::uint64_t islandSharedCacheConflictReplacements = 0;
+        std::uint64_t islandSharedCacheLockWaitNanoseconds = 0;
         std::uint64_t uniformBlockProofsChecked = 0;
         std::uint64_t uniformBlockProofSamplesChecked = 0;
         std::uint64_t uniformBlockProofFallbackBlocks = 0;
@@ -157,12 +209,30 @@ namespace VoxelForgeCore
         double marchingCubesSkirtMilliseconds = 0.0;
         double marchingCubesOtherMilliseconds = 0.0;
         std::uint64_t marchingCubesGradientFallbackDensityCalls = 0;
+        std::uint64_t marchingCubesGradientCalls = 0;
         std::uint64_t marchingCubesEdgeMidpointDensityCalls = 0;
+        std::uint64_t marchingCubesEdgeMidpointDensityMemoHits = 0;
         std::uint64_t marchingCubesGradientMemoHits = 0;
+        std::uint64_t marchingCubesX8DensityCalls = 0;
+        std::uint64_t marchingCubesX8ActiveLanes = 0;
+        std::uint64_t marchingCubesCandidateCells = 0;
+        std::uint64_t marchingCubesZBandRejectedCells = 0;
+        std::uint64_t marchingCubesCellClassificationCalls = 0;
+        std::uint64_t marchingCubesSurfaceCellCalls = 0;
+        std::uint64_t marchingCubesProofSkippedSolidCells = 0;
+        std::uint64_t marchingCubesProofSkippedAirCells = 0;
+        std::uint64_t marchingCubesProofSkippedDensitySamples = 0;
+        std::uint64_t marchingCubesSkirtEdgeCandidates = 0;
+        std::uint64_t marchingCubesSkirtBoundaryCandidates = 0;
+        std::uint64_t marchingCubesSkirtDensityProbes = 0;
         double groundRefinementExclusiveMilliseconds = 0.0;
         double capRefinementExclusiveMilliseconds = 0.0;
         double meshAssemblyMilliseconds = 0.0;
         double meshingMilliseconds = 0.0;
+        double materialQueryMilliseconds = 0.0;
+        std::uint64_t materialQueries = 0;
+        std::uint64_t materialCandidateChecks = 0;
+        bool materialTileOutsideEveryVein = true;
         double featureListMilliseconds = 0.0;
         double farShellMilliseconds = 0.0;
         double farStratumShellMilliseconds = 0.0;
@@ -191,6 +261,9 @@ namespace VoxelForgeCore
         std::uint32_t farHorizonVersion = 0;
         bool farShellRepairSkipped = false;
         bool tileWasClassified = false;
+        std::uint8_t tileProofVetoReason = 0;
+        bool tileProofSafe = false;
+        bool tileLegacyBlockProofRelevant = false;
         bool meshingSkipped = false;
         bool featureRefinedResolution = false;
         bool heightfieldBandLimited = false;
@@ -216,7 +289,9 @@ namespace VoxelForgeCore
         std::uint64_t densitySampleCount = 0;
         std::uint64_t meshPayloadAllocatedBytes = 0;
         std::uint64_t densityHash = 0, meshHash = 0, payloadHash = 0, topologyHash = 0;
-        bool hasDensityHash = false, hasMeshHash = false, hasPayloadHash = false, hasTopologyHash = false;
+        std::uint64_t materialHash = 0;
+        bool hasDensityHash = false, hasMeshHash = false, hasPayloadHash = false,
+            hasTopologyHash = false, hasMaterialHash = false;
     };
 
     struct WorldConfiguration
@@ -249,8 +324,130 @@ namespace VoxelForgeCore
     // L'assembleur v1 encode coordonnees et scalaires en 1/256 de voxel, independamment des tuiles.
     inline constexpr std::int64_t WorldAssemblySubvoxelsPerVoxel = 256;
     inline constexpr std::uint32_t WorldAssemblySchemaVersion = 2;
-    // Version 14 adds shared passage columns for long native open-air crossings.
-    inline constexpr std::uint32_t WorldAssemblyEvaluatorVersion = 14;
+    // Version 14 adds shared passage columns; version 16 smooths owner Gradient faces;
+    // version 20 restores full Gradient amplitude and uses a continuous signed-distance band union;
+    // version 22 overlaps tread sections and smooths FloatingIslands passage-mouth features;
+    // version 23 uses signed-distance support for sparse SurfaceWorld-to-TunnelNetwork treads;
+    // version 24 narrows passage-mouth support and filters native ground detail;
+    // version 25 joins open-mouth treads to native terrain relief before flattening inward;
+    // version 26 tapers mouth width and bounds the support to the native terrain surface;
+    // version 27 keeps the native blend through the entrance ramp and narrows its filter;
+    // version 28 tapers the open end to a worn path and blends it into walkable support;
+    // version 29 curves the supported and carved path through both mouth shoulders;
+    // version 30 narrows the flat core and blends support through a noisy natural shoulder;
+    // version 31 adds shared, capsule-safe field relief to both open-mouth walking surfaces;
+    // version 32 lowers the mouth core into the bore and removes thin filtered-field remnants;
+    // version 33 fades relief before small detached field remnants;
+    // version 34 keeps the open-mouth tread within native terrain curvature and noise;
+    // version 35 follows the native heightfield farther into the mouth ramp;
+    // version 36 protects the walking line with a gradual filter fade;
+    // version 37 lengthens that fade and restores the last capsule margin;
+    // version 38 keeps native ground at the lip and blends the tread in below it;
+    // version 39 bends the mouth tread across the native field and restores the open bore;
+    // version 40 uses broad route-only filtering and smooth, low-frequency tread relief;
+    // version 41 rounds the mouth tread and removes filter route masks;
+    // version 42 clips the mouth bore at the native walking surface;
+    // version 43 localizes the mouth field filter without masking the surface route;
+    // version 44 widens the natural shoulder blend and follows lower-frequency terrain;
+    // version 45 tests the passage tread independently of route-anchor support;
+    // version 46 fades the native filter broadly along the authored surface path;
+    // version 47 carries the full winding route with a narrow native-height tread;
+    // version 48 fades route support out before the surface mouth;
+    // version 49 keeps the mouth filtered and restores detail on the outer route;
+    // version 50 limits route-field restoration to 65% of the convolution weight;
+    // version 51 narrows the route fade to 8 m horizontal and 6 m vertical;
+    // version 52 evaluates mouth support in positive-density route tiles;
+    // version 53 fades the supported passage tread in from native ground at both mouths;
+    // version 54 tapers mouth-support width and depth;
+    // version 55 blends that tread from native ground and applies route support after carving;
+    // version 56 seats route support at the audited floor;
+    // version 57's raised lip overfilled the mouth;
+    // version 58 restores the native-height lip and explicitly covers route-support queries;
+    // version 59 fixes route-support distance units and lengthens the worn-mouth taper;
+    // version 60 brings the narrow terrain-following route tread in before the outer mouth lip;
+    // version 61 finishes that tread by five metres and preserves its exact walking boundary;
+    // version 62 fades the route tread along the authored path and seats it below the capsule;
+    // version 63 only adds that tread through native-air gaps and fades it over two path metres;
+    // version 64 rounds the path-to-ground join while keeping its top below the capsule;
+    // version 65 tests rounded tread cross-sections and softer native-height following;
+    // version 66 fades the mouth carve and support together so native crater ground forms the lip;
+    // version 67 follows the native route height more closely and completes the entrance fade sooner;
+    // version 68 narrows the flat walk core and eases a shallow worn ramp into the cave floor;
+    // version 69 lets capsule-cleared mouth treads bridge positive-density floor gaps;
+    // version 70 lowers the mouth tread enough to clear the capsule's toe margin;
+    // version 71 keeps its rounded top inside the route's shallow support-probe band;
+    // version 72 adds mouth support only below its signed floor, avoiding capsule-space fill;
+    // version 73 carries the terrain-following route tread to the actual passage mouth;
+    // version 74 seats that short connection in the audited shallow support band;
+    // version 75 keeps the rounded path edge outside the capsule's shallow floor probes;
+    // version 76 carries the endpoint tread through the passage's first support-probe depth;
+    // version 77 joins the mouth floor to native ground through a noisy walk ramp;
+    // version 78 rounds the ramp shoulder and clears its initial capsule envelope;
+    // version 79 tested the unbuilt native-ground mouth;
+    // version 80 narrows the walk tread;
+    // version 81 adds bounded path relief and a wavering, worn shoulder;
+    // version 82 lowers the relief into the tread to keep its capsule clearance;
+    // version 83 increases the natural edge warp and recessed surface variation;
+    // version 84 moves that variation to the actual mouth and restores support width;
+    // version 85 keeps the established lower-mouth capsule profile while shaping entry mouths;
+    // version 86 restricts route reinforcement to native solid and recesses the worn top;
+    // version 87 restores its pre-carve route placement.
+    // version 88 removes the independent mouth cap; the native crater surface forms the entry ramp.
+    // version 89 removes the one-sided entry tread band as well.
+    // version 90 lengthens the entrance floor-carve fade to retain native ground beneath the route.
+    // version 91 lets a narrow mouth support follow the full native surface relief.
+    // version 92 derives mouth floor alignment from the entrance path for first-segment samples too.
+    // version 93 blends the carve against native density so a zero fade really preserves ground.
+    // version 94 applies the mouth floor fade only beneath the walking surface.
+    // version 95 seats retained native ground just below the capsule's foot clearance.
+    // version 96 limits that preservation to the shallow support band, away from inner coils.
+    // version 97 extends the native support band down to the sampled rock envelope.
+    // version 98 raises the support band back to the route floor while keeping it below the capsule.
+    // version 99 restores native-solid route support after the passage carve;
+    // version 100 restores a shallow, noise-shaped entrance tread under its capsule gate;
+    // version 101 preserves the native FI field around the resolved walking line;
+    // version 102 tapers the mouth filter from its 1.5 m core to the same 12.5 m edge;
+    // version 103 blends route protection over a metre-scale shoulder;
+    // version 104 composes overlapping route masks once, by maximum influence;
+    // version 105 widens the route blend to soften the native/filter seam;
+    // version 106 preserves raw negative rock under the route without unfiltering its crown;
+    // version 107 softens that restore and broadens the narrow upper-coil walk core;
+    // version 108 deepens relief and lowers route restoration to soften the remaining crease;
+    // version 109 blended 60% of the two-metre mouth field convolution;
+    // version 110 restores the full filtered contour and widens the upper walk core;
+    // version 111 permits the capsule-cleared signed tread to bridge the upper mouth gap;
+    // version 112 adds a tenth-metre margin to the rounded upper tread edge.
+    // version 139 keeps native ground only in a capsule-scale mouth lane and carries
+    // the seeded terrain contour through the full upper-mouth support;
+    // versions 140-145 tested short-span decks, mouth fade length, route phase and tread SDF;
+    // versions 146-148 tested a sunk chord, near-side phase and all-style FI spiral.
+    // version 149 routes non-spiral FI mouths into a tight near-side ring.
+    // version 150 widened that ring but left a central pillar.
+    // version 151 keeps the ring half a metre outside the passage bore.
+    // version 152 fills capsule-clear positive-density gaps under the narrow mouth tread.
+    // version 153 tested a one-metre entry-turn sink; it left the raised route visible and rippled the floor.
+    // version 154 tightens the FI ring and uses a steeper, still walkable descent to separate hidden coils.
+    // version 155's tighter coil removed the fin but made sharp fragments and route collisions.
+    // version 156 keeps the 3 m ring, overlaps the bore by 0.25 m, and seats the native tread below the capsule.
+    // version 157 joins the near-side FI ring at a tangent so its entrance does not kink across the crater.
+    // version 158 tested a descending entry coil; its exposed canopy is rejected.
+    // version 159 keeps the tangent and uses a steeper sub-15-degree FI descent to separate its coils.
+    // version 160 removed the mouth walk lane; it left the bridge and lost one support sample.
+    // version 161 tapered the anchored entry radius to 3 m; a fin remained at the crater lip.
+    // version 162 disabled native-tread restoration alone; the carve fade still preserved the ridge.
+    // version 163 disabled both passage restorations; it removed the path support.
+    // version 164 narrowed the first two inner FI route points; it enlarged the lip fin.
+    // version 165 disabled native-rock blending around the FI stratum route; the ridge remained.
+    // version 166 disabled the FI mouth support handoff; route support failed on the island approach.
+    // version 167 tested centerline footing on the FI approach; its bridge remained and floor ripple rose.
+    // version 168 removed the connector's 1 m lift; the crater crossing remained exposed.
+    // version 169 sank every connector 2 m; it left four FI route support probes low.
+    // version 170 sinks only connectors touching the anchored root by 1 m.
+    // Version 208 keeps the crater tread scoped to style-zero FI mouths.
+    // Version 210 keeps bulk native-cave sampling on the scalar field path at strata edges.
+    // Version 211 makes coordinate biasing in the shared cell hash unsigned, removing signed-overflow UB.
+    // Version 212 balances generated entry routes against existing walk lanes and preserves their shared treads.
+    inline constexpr std::uint32_t WorldAssemblyEvaluatorVersion = 213;
 
     enum class FieldChannel : std::uint32_t
     {
@@ -297,6 +494,59 @@ namespace VoxelForgeCore
         std::int64_t capRidgeWavelengthSubvoxels = 256 * 64;
     };
 
+    enum class WorldAssemblySurfaceProfileKindV1 : std::uint32_t
+    {
+        natural = 0,
+        periodicHills = 1,
+        mirroredRelief = 2,
+        flatField = 3
+    };
+
+    // Version zero is the historical noise terrain and is intentionally omitted from
+    // canonical JSON and hashes. Version one uses metre-derived fixed-scale dimensions;
+    // phases are Q0.32 turns generated from the recipe seed during plan construction.
+    struct WorldAssemblySurfaceProfileV1
+    {
+        std::uint32_t version = 0;
+        WorldAssemblySurfaceProfileKindV1 kind = WorldAssemblySurfaceProfileKindV1::natural;
+        std::int64_t h0Subvoxels = 0;
+        std::int64_t amplitudeXSubvoxels = 0;
+        std::int64_t amplitudeYSubvoxels = 0;
+        std::int64_t wavelengthXSubvoxels = 0;
+        std::int64_t wavelengthYSubvoxels = 0;
+        std::uint32_t phaseXTurnsQ32 = 0;
+        std::uint32_t phaseYTurnsQ32 = 0;
+        std::int64_t mirrorLambdaQ16 = 0;
+        std::int64_t minimumArenaClearanceSubvoxels = 0;
+
+        friend bool operator==(const WorldAssemblySurfaceProfileV1&,
+            const WorldAssemblySurfaceProfileV1&) = default;
+    };
+
+    inline std::uint32_t WorldAssemblySurfaceProfileSeededPhaseQ32(
+        std::uint32_t seed, std::uint32_t axis) noexcept
+    {
+        std::uint64_t value = static_cast<std::uint64_t>(seed)
+            ^ (axis == 0 ? 0x706572696f645831ull : 0x706572696f645931ull);
+        value += 0x9E3779B97F4A7C15ull;
+        value = (value ^ (value >> 30)) * 0xBF58476D1CE4E5B9ull;
+        value = (value ^ (value >> 27)) * 0x94D049BB133111EBull;
+        value ^= value >> 31;
+        return static_cast<std::uint32_t>(value >> 32);
+    }
+
+    inline void ResolveWorldAssemblySurfaceProfilePhasesV1(
+        WorldAssemblySurfaceProfileV1& profile, std::uint32_t seed) noexcept
+    {
+        if (profile.version == 1
+            && (profile.kind == WorldAssemblySurfaceProfileKindV1::periodicHills
+                || profile.kind == WorldAssemblySurfaceProfileKindV1::mirroredRelief))
+        {
+            profile.phaseXTurnsQ32 = WorldAssemblySurfaceProfileSeededPhaseQ32(seed, 0);
+            profile.phaseYTurnsQ32 = WorldAssemblySurfaceProfileSeededPhaseQ32(seed, 1);
+        }
+    }
+
     struct WorldAssemblyRecipeV1
     {
         std::uint32_t schemaVersion = WorldAssemblySchemaVersion;
@@ -314,6 +564,7 @@ namespace VoxelForgeCore
         std::int64_t biomeClimateReliefWavelengthSubvoxels = 256 * 3333;
         std::int64_t biomeClimateMoistureWavelengthSubvoxels = 256 * 2500;
         std::int64_t biomeClimateReliefContrastQ16 = 2ll << 16;
+        WorldAssemblySurfaceProfileV1 surfaceProfile;
         std::vector<WorldAssemblyBiomeProfileV1> biomes;
         std::uint64_t contentHash = 0;
     };
@@ -373,6 +624,7 @@ namespace VoxelForgeCore
         std::int64_t capRidgeWavelengthSubvoxels = 256 * 64;
         std::int64_t waterSurfaceSubvoxels = 0;
         bool waterEnabled = false;
+        WorldAssemblySurfaceProfileV1 surfaceProfile;
         std::vector<WorldAssemblyFeatureV1> features;
         WorldAssemblyRouteConstraintsV1 routeConstraints;
         std::vector<WorldAssemblyRoutePointV1> route;
@@ -444,6 +696,8 @@ namespace VoxelForgeCore
         std::int64_t anchorIslandMinimumRadiusSubvoxels = 0;
         std::int64_t anchorRootBottomZSubvoxels = 0;
         std::int64_t anchorMouthOffsetSubvoxels = 0;
+        // Style-zero mouths follow the sampled island surface into the passage lip.
+        bool terrainFollowingRoute = false;
         WorldAssemblyRouteConstraintsV1 routeConstraints;
         std::uint64_t contentHash = 0;
     };
@@ -584,8 +838,139 @@ namespace VoxelForgeCore
     // Core adapter. Coordinates are half-open micrometre intervals; recipe anchors retain their
     // source fixed-point units so this record never rounds the recipe itself.
     inline constexpr std::uint32_t ResolvedLayoutSchemaVersionV3 = 3;
+    inline constexpr std::uint32_t ResolvedLayoutStampVocabularyVersionV1 = 1;
+    inline constexpr std::uint32_t ResolvedLayoutStampVocabularyVersionV2 = 2;
+    inline constexpr std::uint32_t ResolvedLayoutStampVocabularyVersionV3 = 3;
+    inline constexpr std::uint32_t ResolvedLayoutCavernGraphVocabularyVersionV1 = 1;
+    inline constexpr std::uint32_t ResolvedLayoutOreVeinVocabularyVersionV1 = 1;
     enum class ResolvedLayoutValidationModeV3 : std::uint8_t { compatibility, strict };
 
+    // Stable, bounded geometry edits composed into every Core field after the shared
+    // strate boundaries and passages. Coordinates and extents use integer micrometres.
+    enum class ResolvedSdfStampKindV1 : std::uint8_t
+    {
+        carveEllipsoid = 1,
+        carveArch = 2,
+        fillPillar = 3,
+        fillDais = 4,
+        fillMonolith = 5,
+        fillPlatform = 6
+    };
+
+    struct ResolvedLayoutStampRequestV1
+    {
+        std::string stableId;
+        std::int32_t strateIndex = -1;
+        ResolvedSdfStampKindV1 kind = ResolvedSdfStampKindV1::carveEllipsoid;
+        // A preferred center and a bounded deterministic search radius.
+        std::array<std::int64_t, 3> anchorPositionMicrometres{};
+        std::int64_t placementRadiusMicrometres = 0;
+        std::array<std::int64_t, 3> halfExtentsMicrometres{};
+        std::int64_t smoothWidthMicrometres = 0;
+        std::int64_t irregularityAmplitudeMicrometres = 0;
+        std::int64_t irregularityWavelengthMicrometres = 0;
+        std::int64_t roundingRadiusMicrometres = 0;
+        std::int64_t minimumSpacingMicrometres = 0;
+        // 0 = free placement, 1 = seated on the authored flat profile floor.
+        std::uint8_t attachmentPolicy = 0;
+        std::int64_t floorMicrometres = 0;
+        std::uint8_t yawQuarterTurns = 0;
+    };
+
+    struct ResolvedLayoutStampV1
+    {
+        std::string stableId;
+        std::int32_t strateIndex = -1;
+        ResolvedSdfStampKindV1 kind = ResolvedSdfStampKindV1::carveEllipsoid;
+        std::array<std::int64_t, 3> positionMicrometres{};
+        std::array<std::int64_t, 3> boundsMinimumMicrometres{};
+        std::array<std::int64_t, 3> boundsMaximumMicrometres{};
+        std::array<std::int64_t, 3> halfExtentsMicrometres{};
+        std::int64_t smoothWidthMicrometres = 0;
+        std::int64_t irregularityAmplitudeMicrometres = 0;
+        std::int64_t irregularityWavelengthMicrometres = 0;
+        std::int64_t roundingRadiusMicrometres = 0;
+        std::int64_t minimumSpacingMicrometres = 0;
+        std::uint8_t attachmentPolicy = 0;
+        std::int64_t floorMicrometres = 0;
+        std::uint64_t irregularitySeed = 0;
+        std::uint8_t yawQuarterTurns = 0;
+    };
+
+    // Optional room and swept-edge records for a resolved cavern graph. Geometry is stored
+    // in integer micrometres; bounds include smooth blending, relief, and floor support.
+    struct ResolvedCavernRoomV1
+    {
+        std::string stableId;
+        std::int32_t strateIndex = -1;
+        std::array<std::int64_t, 3> centerMicrometres{};
+        std::array<std::int64_t, 3> halfExtentsMicrometres{};
+        std::int64_t floorMicrometres = 0;
+        std::int64_t smoothWidthMicrometres = 0;
+        // Optional feature-to-feature union width. Zero preserves the historical
+        // behavior where smoothWidthMicrometres also controls the graph union.
+        std::int64_t unionWidthMicrometres = 0;
+        std::int64_t irregularityAmplitudeMicrometres = 0;
+        std::int64_t irregularityWavelengthMicrometres = 0;
+        std::uint64_t irregularitySeed = 0;
+        std::array<std::int64_t, 3> boundsMinimumMicrometres{};
+        std::array<std::int64_t, 3> boundsMaximumMicrometres{};
+    };
+
+    struct ResolvedCavernEdgeV1
+    {
+        std::string stableId;
+        std::string startAnchorStableId;
+        std::string endRoomStableId;
+        std::int32_t strateIndex = -1;
+        // A single cubic Bezier in XY. Its four Z values are the cubic floor profile.
+        std::array<std::array<std::int64_t, 3>, 4> controlPointsMicrometres{};
+        // Resolve-time, error-bounded approximation of the cubic centerline. Each
+        // consecutive pair is a physical segment used by the native cave field.
+        std::vector<std::array<std::int64_t, 3>> polylineMicrometres;
+        std::int64_t boreRadiusMicrometres = 0;
+        std::int64_t boreHeightMicrometres = 0;
+        std::int64_t floorSupportDepthMicrometres = 0;
+        std::int64_t smoothWidthMicrometres = 0;
+        // Optional feature-to-feature union width; floor fillets still use smoothWidth.
+        std::int64_t unionWidthMicrometres = 0;
+        std::int64_t irregularityAmplitudeMicrometres = 0;
+        std::int64_t irregularityWavelengthMicrometres = 0;
+        std::uint64_t irregularitySeed = 0;
+        std::array<std::int64_t, 3> boundsMinimumMicrometres{};
+        std::array<std::int64_t, 3> boundsMaximumMicrometres{};
+    };
+
+    // Immutable material-only deposits. The capsule and its conservative bounds are in
+    // micrometres; bounds include irregularity and the blend envelope.
+    struct ResolvedLayoutOreVeinRequestV1
+    {
+        std::string stableId;
+        std::int32_t strateIndex = -1;
+        std::uint16_t resourceMaterialId = 0;
+        std::array<std::array<std::int64_t, 3>, 2> anchorEndpointsMicrometres{};
+        std::int64_t placementRadiusMicrometres = 0;
+        std::int64_t radiusMicrometres = 0;
+        std::int64_t irregularityAmplitudeMicrometres = 0;
+        std::int64_t irregularityWavelengthMicrometres = 0;
+        std::int64_t blendWidthMicrometres = 0;
+    };
+
+    struct ResolvedLayoutOreVeinV1
+    {
+        std::string stableId;
+        std::int32_t strateIndex = -1;
+        std::uint16_t resourceMaterialId = 0;
+        std::array<std::array<std::int64_t, 3>, 2> endpointsMicrometres{};
+        std::array<std::int64_t, 3> boundsMinimumMicrometres{};
+        std::array<std::int64_t, 3> boundsMaximumMicrometres{};
+        std::int64_t radiusMicrometres = 0;
+        std::int64_t irregularityAmplitudeMicrometres = 0;
+        std::int64_t irregularityWavelengthMicrometres = 0;
+        std::int64_t blendWidthMicrometres = 0;
+        std::uint64_t irregularitySeed = 0;
+    };
+
     struct ResolvedLayoutAnchorV2
     {
         std::string kind;
@@ -608,6 +993,24 @@ namespace VoxelForgeCore
         std::int64_t solidDensityQ16 = 1ll << 16;
     };
 
+    // Runtime policy resolved once from the director's immutable strate/interface
+    // description. These derived capabilities are deliberately omitted from canonical
+    // JSON: their source fields are already hashed and the records preserve that identity.
+    struct ResolvedLayoutStratePassageCapabilitiesV1
+    {
+        bool hasSurfaceLanding = false;
+        bool hasFloatingIslandLanding = false;
+        bool usePassageAnchorForColumns = false;
+        bool hasNativeCaveField = false;
+        bool hasNativeLatticeField = false;
+    };
+
+    struct ResolvedLayoutInterfaceCapabilitiesV1
+    {
+        bool preserveUpperBedrockAirGap = false;
+        bool surfaceToTunnelLandingSupport = false;
+    };
+
     struct ResolvedLayoutStratumV2
     {
         std::string stableId;
@@ -637,6 +1040,39 @@ namespace VoxelForgeCore
         std::int64_t managerChunkWidthMicrometres = 0;
         std::int64_t dispatchChunkWidthMicrometres = 0;
         std::vector<ResolvedLayoutAnchorV2> anchors;
+        ResolvedLayoutStratePassageCapabilitiesV1 passageCapabilities;
+        ResolvedLayoutInterfaceCapabilitiesV1 lowerInterfaceCapabilities;
+    };
+
+    inline bool IsNativeCaveFieldStratum(const ResolvedLayoutStratumV2& stratum) noexcept
+    {
+        return stratum.generatorKind=="Caves"
+            &&stratum.recipeId=="Core.Caves.PrimitiveField"
+            &&stratum.recipeVersion==1;
+    }
+
+    inline bool IsNativeLatticeFieldStratum(const ResolvedLayoutStratumV2& stratum) noexcept
+    {
+        return (stratum.generatorKind=="Maze"||stratum.generatorKind=="VerticalShafts")
+            &&stratum.recipeId=="Core.Lattice.PrimitiveField"
+            &&stratum.recipeVersion==1;
+    }
+
+    inline bool HasNativeGraphField(const ResolvedLayoutStratumV2& stratum) noexcept
+    {
+        return IsNativeCaveFieldStratum(stratum)||IsNativeLatticeFieldStratum(stratum);
+    }
+
+    /** Per-column resolved bands for one adjacent bedrock/ceiling interface.
+     * crossingDepthMicrometres is the actual overlap depth between the two facing bands.
+     */
+    struct ResolvedLayoutTransitionBandsV1
+    {
+        std::int64_t crossingDepthMicrometres = 0;
+        std::int64_t upperBedrockBottomMicrometres = 0;
+        std::int64_t upperBedrockTopMicrometres = 0;
+        std::int64_t lowerCeilingBottomMicrometres = 0;
+        std::int64_t lowerCeilingTopMicrometres = 0;
     };
 
     struct ResolvedLayoutIssueV2
@@ -656,6 +1092,8 @@ namespace VoxelForgeCore
         std::string stableId;
         std::int32_t upperStrateIndex = -1;
         std::int32_t lowerStrateIndex = -1;
+        // EVoxelPassageStyle numeric value used by style-specific passage support.
+        std::uint32_t style = 1;
         std::int64_t placementRadiusSubvoxels = 0;
         std::array<std::int64_t, 3> upperMouthSubvoxels{};
         std::array<std::int64_t, 3> lowerMouthSubvoxels{};
@@ -719,6 +1157,16 @@ namespace VoxelForgeCore
         std::int64_t strateLayoutChunkWidthSubvoxels = 8192;
         std::vector<ResolvedLayoutStratumV2> strates;
         std::vector<ResolvedLayoutPassageV1> passages;
+        // Kept absent from canonical layout identity when no feature requests stamps.
+        std::uint32_t stampVocabularyVersion = 0;
+        std::vector<ResolvedLayoutStampV1> stamps;
+        // Kept absent from canonical identity when there are no graph records.
+        std::uint32_t cavernGraphVocabularyVersion = 0;
+        std::vector<ResolvedCavernRoomV1> cavernRooms;
+        std::vector<ResolvedCavernEdgeV1> cavernEdges;
+        // Omitted from canonical identity when no records are present.
+        std::uint32_t oreVeinVocabularyVersion = 0;
+        std::vector<ResolvedLayoutOreVeinV1> oreVeins;
         std::string stableIdentity;
 
         bool finalize(std::string& error);
@@ -730,6 +1178,17 @@ namespace VoxelForgeCore
             std::string_view json, std::string& error);
     };
 
+    /**
+     * Resolve the deterministic band faces at one XY column. Gradient shares one smooth
+     * displaced face; Interleaved moves the faces inward by a total crossing no larger than
+     * the declared width. Both bands retain authored thickness and touch or overlap, so no
+     * air gap can form.
+     */
+    VFCORE_API ResolvedLayoutTransitionBandsV1 EvaluateResolvedLayoutTransitionBandsV1(
+        const ResolvedLayoutStratumV2& upper, const ResolvedLayoutStratumV2& lower,
+        std::int32_t worldSeed, std::int64_t layoutChunkSizeMicrometres,
+        std::int64_t xMicrometres, std::int64_t yMicrometres);
+
     struct ResolvedLayoutValidatorAuditV3
     {
         std::uint32_t controlsRun = 0;
@@ -743,6 +1202,68 @@ namespace VoxelForgeCore
         const std::vector<ResolvedLayoutPassageConfigV1>& configs,
         std::string& error);
 
+    struct ResolvedLayoutStampPlacementAuditV1
+    {
+        std::uint32_t negativeControlsRun = 0;
+        std::uint32_t negativeControlsRejected = 0;
+        bool passed = false;
+    };
+    VFCORE_API bool ResolveResolvedLayoutStampsV1(
+        ResolvedLayoutSnapshotV3& layout, std::int32_t seed,
+        std::span<const ResolvedLayoutStampRequestV1> requests,
+        std::string& error);
+    VFCORE_API bool ResolveResolvedLayoutStampsV2(
+        ResolvedLayoutSnapshotV3& layout, std::int32_t seed,
+        std::span<const ResolvedLayoutStampRequestV1> requests,
+        std::string& error);
+    // Vocabulary 3 adds explicit rounded capped-cylinder monoliths and rounded-box platforms.
+    VFCORE_API bool ResolveResolvedLayoutStampsV3(
+        ResolvedLayoutSnapshotV3& layout, std::int32_t seed,
+        std::span<const ResolvedLayoutStampRequestV1> requests,
+        std::string& error);
+    VFCORE_API ResolvedLayoutStampPlacementAuditV1 AuditResolvedLayoutStampPlacementV1(
+        const ResolvedLayoutSnapshotV3& layout);
+
+    VFCORE_API bool ResolveResolvedCavernGraphV1(
+        ResolvedLayoutSnapshotV3& layout, std::int32_t seed,
+        std::span<const ResolvedCavernRoomV1> rooms,
+        std::span<const ResolvedCavernEdgeV1> edges,
+        std::string& error);
+    VFCORE_API bool ResolveResolvedLayoutOreVeinsV1(
+        ResolvedLayoutSnapshotV3& layout, std::int32_t seed,
+        std::span<const ResolvedLayoutOreVeinRequestV1> requests,
+        std::string& error);
+
+    struct ResolvedLayoutOreVeinPlacementAuditV1
+    {
+        std::uint32_t negativeControlsRun = 0;
+        std::uint32_t negativeControlsRejected = 0;
+        bool passed = false;
+    };
+    VFCORE_API ResolvedLayoutOreVeinPlacementAuditV1 AuditResolvedLayoutOreVeinPlacementV1(
+        const ResolvedLayoutSnapshotV3& layout);
+
+    struct MaterialSampleV1
+    {
+        std::uint16_t hostMaterialId = 1;
+        std::array<std::uint16_t, 2> resourceMaterialIds{};
+        std::array<std::uint16_t, 2> resourceWeightsQ16{};
+    };
+
+    struct ResourceVolumeV1
+    {
+        std::uint16_t resourceMaterialId = 0;
+        std::uint64_t weightedSamplesQ16 = 0;
+        double volumeCubicMetres = 0.0;
+    };
+
+    struct OreMiningYieldV1
+    {
+        std::uint64_t solidSamplesRemoved = 0;
+        double sampleSpacingMetres = 0.0;
+        std::vector<ResourceVolumeV1> resources;
+    };
+
     struct FloatingIslandBoundsAuditResult
     {
         std::uint64_t boxesTested = 0;
@@ -1021,6 +1542,7 @@ namespace VoxelForgeCore
         const WorldConfiguration& configuration() const;
         const WorldAssemblyManifest* worldAssembly() const noexcept;
         const ResolvedLayoutSnapshotV3* resolvedLayout() const noexcept;
+        ResolvedWorldSnapshot withResolvedLayout(const ResolvedLayoutSnapshotV3& layout) const;
         ResolvedWorldSnapshot withoutResolvedLayoutPassages() const;
 
     private:
@@ -1064,6 +1586,7 @@ namespace VoxelForgeCore
         bool roundTunnels = false;
         bool enhancedTunnelWalls = true;
         bool profileDetailBand = false;
+        bool parallelSignEdgeRepair = false;
         // World-wide walkability is a validation pass, not an input to the compiled field.
         // Keep it enabled for benchmarks/audits; the interactive viewer can defer it.
         bool validatePassageRoutes = true;
@@ -1248,6 +1771,9 @@ namespace VoxelForgeCore
         std::int32_t bandMinZVoxel = -2147483647 - 1;
         std::int32_t bandMaxZVoxel = 2147483647;
         bool hashDensity = false;
+        // Falsifier mode: retain mesh/topology hashes while permitting proven empty tiles
+        // to skip their density lattice. The density hash of such a skipped tile is empty.
+        bool allowUniformSkipsWhenHashing = false;
         bool captureDensitySamples = false;
         // Diagnostic only; materialize the full density lattice even when block proofs
         // establish that the tile has no surface.
@@ -1266,6 +1792,14 @@ namespace VoxelForgeCore
         // Separate cold pass only; samples the MC inner stages without changing output.
         // Passe froide separee seulement; mesure les etapes internes MC sans changer la sortie.
         bool profileMesherStages = false;
+        // Research-only: count passage-composer work per generated tile.
+        bool profilePassageComposer = false;
+        // Research-only: collect tile-drain kernel counters and floating-island cache metrics.
+        // Inactive on ordinary generation so the hot path only pays the option check.
+        bool instrumentTileDrain = false;
+        bool exactMidpointDensityMemo = false;
+        bool activeLaneBatching = false;
+        std::uint32_t proofBlockCells = 8;
         // Diagnostic only; fills and checks every lattice sample in blocks certified uniform.
         // Diagnostic seulement; evalue et verifie tous les echantillons des blocs uniformes.
         bool auditUniformBlockProofs = false;
@@ -1282,7 +1816,7 @@ namespace VoxelForgeCore
         // LOD4-8 mesh hashes are salted; density and LOD0-3 keep their direct identities.
         // Incremente quand les plafonds partages ou l'horizon lointain changent.
         // Les hashes de maillage LOD4-8 incluent cette version; LOD0-3 gardent leur identite directe.
-        std::uint32_t farHorizonVersion = 4;
+        std::uint32_t farHorizonVersion = 5;
         // Linux research controls for reproducing L5 negative controls. Defaults preserve output.
         std::uint32_t diagnosticGlobalOctaveDrop = 0;
         std::uint32_t diagnosticCellStride = 1;
@@ -1336,6 +1870,12 @@ namespace VoxelForgeCore
         ShapeBuildStats buildStats() const;
 
         float densityAt(Vec3d voxelPosition) const;
+        // Companion material query for the bound strate evaluator; coordinates use Core voxels.
+        MaterialSampleV1 materialAt(Vec3d voxelPosition) const;
+        // Measure-only carve estimate. This does not apply an edit or grant inventory.
+        OreMiningYieldV1 measureOreMiningYieldForSphere(
+            Vec3d centerVoxel, double radiusMetres,
+            double sampleSpacingMetres = 0.25) const;
         // Audit-only view of density-field columns and short spans supporting passage voids.
         std::vector<PassageVoidCrossingAuditV1> passageVoidCrossings() const;
         bool isPassageColumnSample(std::size_t passageIndex, std::size_t segmentIndex,

Standalone/Core/src/CoreNamespacePreamble.h

@@ -1,5 +1,9 @@
 #pragma once
 
+// Core implementation TUs opt into the standalone Unreal-shaped compatibility headers. UE's
+// Linux-generated module TUs leave this unset so those same header names forward to the engine.
+#define VFCORE_USE_COMPAT 1
+
 // Every standard or platform header used by the copied implementation must be included before
 // its wrapper opens vfcore::detail. This prevents system declarations from being nested in the
 // private namespace when the implementation includes its Unreal-shaped compatibility headers.
@@ -56,6 +60,7 @@
 #include "VoxelForgeCore/VoxelForgeCore.h"
 #include "VoxelForgeCore/ThreadLocalStorage.h"
 #include "VoxelForgeCore/SharedColumnCache.h"
+#include "VoxelForgeCore/FloatingIslandInstrumentation.h"
 
 // Keep Core's expression-level FMA behavior fixed regardless of the toolchain setting.
 // Clang's "fast" mode ignores the pragma, so Core's runtime self-test rejects that build.

Standalone/Core/src/FarShellsInternal.h

@@ -1217,6 +1217,82 @@ inline void AppendFarStratumShells(const FStandaloneOwnerWorld& World,const FSta
     Mesh.NumSurfaceVertices=OldSurfaceVertices+AddedVertices;
 }
 
+// Fill only underside cells that marching cubes missed. Active transitions use the
+// same displaced face and passage-mouth fade as the signed-distance field.
+struct FTransitionFaceReplacement
+{
+    double BaseZVoxels=0.0;
+    double MaximumDisplacementVoxels=0.0;
+    std::vector<uint8> Cells;
+};
+
+inline int32 RemoveCoarseTransitionFaceTriangles(FVoxelMeshData& Mesh,
+    const FIntVector& Origin,int32 Step,int32 GridSide,double VoxelSizeCm,
+    const std::vector<FTransitionFaceReplacement>& Replacements,bool bUpward)
+{
+    if(Step<=0||GridSide<2||VoxelSizeCm<=0.0||Replacements.empty())return 0;
+    const int32 TriangleCount=Mesh.Triangles.Num()/3;
+    const int32 OldCeilingStart=std::max(0,TriangleCount-Mesh.NumCeilingTriangles);
+    TArray<uint8> OldMasks=Mesh.TriangleSkirtFaceMasks;
+    OldMasks.SetNum(TriangleCount);
+    TArray<int32> KeptTriangles;
+    TArray<uint8> KeptMasks;
+    KeptTriangles.Reserve(Mesh.Triangles.Num());
+    KeptMasks.Reserve(TriangleCount);
+    int32 Removed=0,RemovedCeiling=0;
+    const int32 CellSide=GridSide-1;
+    for(int32 Triangle=0;Triangle<TriangleCount;++Triangle)
+    {
+        const int32 IA=Mesh.Triangles[Triangle*3];
+        const int32 IB=Mesh.Triangles[Triangle*3+1];
+        const int32 IC=Mesh.Triangles[Triangle*3+2];
+        bool bRemove=false;
+        if(OldMasks[Triangle]==0&&IA>=0&&IB>=0&&IC>=0
+            &&IA<Mesh.Vertices.Num()&&IB<Mesh.Vertices.Num()&&IC<Mesh.Vertices.Num())
+        {
+            const FVector& A=Mesh.Vertices[IA];
+            const FVector& B=Mesh.Vertices[IB];
+            const FVector& C=Mesh.Vertices[IC];
+            const FVector GeometricNormal=FVector::CrossProduct(B-A,C-A);
+            const double NormalLength=GeometricNormal.Size();
+            const double Facing=NormalLength>1.0e-12?GeometricNormal.Z/NormalLength:0.0;
+            if((bUpward&&Facing>0.35)||(!bUpward&&Facing< -0.35))
+            {
+                const double X=(A.X+B.X+C.X)/(3.0*VoxelSizeCm);
+                const double Y=(A.Y+B.Y+C.Y)/(3.0*VoxelSizeCm);
+                const double Z=(A.Z+B.Z+C.Z)/(3.0*VoxelSizeCm);
+                const int32 CellX=static_cast<int32>(std::floor((X-Origin.X)/Step));
+                const int32 CellY=static_cast<int32>(std::floor((Y-Origin.Y)/Step));
+                if(CellX>=0&&CellX<CellSide&&CellY>=0&&CellY<CellSide)
+                {
+                    const std::size_t Cell=static_cast<std::size_t>(CellY)*CellSide+CellX;
+                    for(const auto& Replacement:Replacements)
+                    {
+                        if(Cell>=Replacement.Cells.size()||!Replacement.Cells[Cell])continue;
+                        const double Margin=Replacement.MaximumDisplacementVoxels+4.0;
+                        if(Z>=Replacement.BaseZVoxels-Margin
+                            &&Z<=Replacement.BaseZVoxels+Margin)
+                        {bRemove=true;break;}
+                    }
+                }
+            }
+        }
+        if(bRemove)
+        {
+            ++Removed;
+            if(Triangle>=OldCeilingStart)++RemovedCeiling;
+            continue;
+        }
+        KeptTriangles.Add(IA);KeptTriangles.Add(IB);KeptTriangles.Add(IC);
+        KeptMasks.Add(OldMasks[Triangle]);
+    }
+    if(Removed==0)return 0;
+    Mesh.Triangles=std::move(KeptTriangles);
+    Mesh.TriangleSkirtFaceMasks=std::move(KeptMasks);
+    Mesh.NumCeilingTriangles=std::max(0,Mesh.NumCeilingTriangles-RemovedCeiling);
+    return Removed;
+}
+
 inline void AppendStratumBoundaryCeilings(const FStandaloneOwnerWorld& World,
     const FStandaloneShapeWorld& Shape,const FVoxelTileKey& Key,int32 Step,FVoxelMeshData& Mesh)
 {
@@ -1230,9 +1306,14 @@ inline void AppendStratumBoundaryCeilings(const FStandaloneOwnerWorld& World,
     {
         double FaceZ=0.0;
         double Thickness=0.0;
+        double MaximumDisplacementVoxels=0.0;
+        std::vector<double> FaceHeights;
         std::vector<uint8> SolidAbove;
+        const VoxelForgeCore::ResolvedLayoutStratumV2* Stratum=nullptr;
+        bool bTransition=false;
     };
     std::vector<FCandidate> Candidates;
+    std::vector<FTransitionFaceReplacement> Replacements;
     const double CoreMicrons=std::max<std::uint32_t>(1,World.CoreVoxelSizeMicrons);
     for(const FStrateSlot& Slot:World.Manager->GetLayout())
     {
@@ -1243,19 +1324,34 @@ inline void AppendStratumBoundaryCeilings(const FStandaloneOwnerWorld& World,
         Candidate.FaceZ=static_cast<double>(Stratum->ceiling.bottomMicrometres)/CoreMicrons;
         Candidate.Thickness=static_cast<double>(Stratum->ceiling.topMicrometres
             -Stratum->ceiling.bottomMicrometres)/CoreMicrons;
-        if(Candidate.FaceZ<Origin.Z-1.0e-6||Candidate.FaceZ>Origin.Z+Extent+1.0e-6)continue;
+        Candidate.Stratum=Stratum;
+        const auto* transitionUpper=Shape.FindResolvedLayoutStratumByOrder(Stratum->order-1);
+        const bool bTransition=transitionUpper
+            &&Shape.IsResolvedLayoutTransitionActive(*transitionUpper);
+        const double displacement=bTransition?static_cast<double>(
+            Shape.ResolvedTransitionMaximumFaceDisplacementMicrometres(*transitionUpper,*Stratum))
+            /CoreMicrons:0.0;
+        if(Candidate.FaceZ<Origin.Z-displacement-1.0e-6
+            ||Candidate.FaceZ>Origin.Z+Extent+displacement+1.0e-6)continue;
+        Candidate.bTransition=bTransition;
+        Candidate.MaximumDisplacementVoxels=displacement;
         const double Epsilon=std::min(0.5,Candidate.Thickness*0.25);
         if(Epsilon<=0.0)continue;
-        Candidate.SolidAbove.resize(static_cast<std::size_t>(GridSide)*GridSide,0);
+        const std::size_t GridCount=static_cast<std::size_t>(GridSide)*GridSide;
+        Candidate.FaceHeights.resize(GridCount,Candidate.FaceZ);
+        Candidate.SolidAbove.resize(GridCount,0);
         bool AnySolidAbove=false;
         for(int32 Y=0;Y<GridSide;++Y)for(int32 X=0;X<GridSide;++X)
         {
             const double WorldX=Origin.X+X*GridStep;
             const double WorldY=Origin.Y+Y*GridStep;
+            const std::size_t GridIndex=static_cast<std::size_t>(Y*GridSide+X);
+            Candidate.bTransition=Shape.ResolvedCeilingBottomAt(*Candidate.Stratum,
+                WorldX,WorldY,Candidate.FaceHeights[GridIndex])||Candidate.bTransition;
             const float Above=Shape.DensityAt(static_cast<float>(WorldX),static_cast<float>(WorldY),
-                static_cast<float>(Candidate.FaceZ+Epsilon));
+                static_cast<float>(Candidate.FaceHeights[GridIndex]+Epsilon));
             const bool bSolidAbove=std::isfinite(Above)&&Above<0.0f;
-            Candidate.SolidAbove[static_cast<std::size_t>(Y*GridSide+X)]=bSolidAbove?1:0;
+            Candidate.SolidAbove[GridIndex]=bSolidAbove?1:0;
             AnySolidAbove=AnySolidAbove||bSolidAbove;
         }
         if(AnySolidAbove)Candidates.push_back(std::move(Candidate));
@@ -1277,8 +1373,19 @@ inline void AppendStratumBoundaryCeilings(const FStandaloneOwnerWorld& World,
     std::vector<int32> NewTriangles;
     for(const FCandidate& Candidate:Candidates)
     {
-        std::vector<int32> VertexMap(static_cast<std::size_t>(GridSide)*GridSide,INDEX_NONE);
-        const double CeilingZ=Candidate.FaceZ;
+        const std::size_t GridCount=static_cast<std::size_t>(GridSide)*GridSide;
+        std::vector<int32> VertexMap(GridCount,INDEX_NONE);
+        FTransitionFaceReplacement Replacement;
+        Replacement.BaseZVoxels=Candidate.FaceZ;
+        Replacement.MaximumDisplacementVoxels=Candidate.MaximumDisplacementVoxels;
+        Replacement.Cells.resize(static_cast<std::size_t>(GridSide-1)*(GridSide-1),0);
+        const auto heightAt=[&](double X,double Y)
+        {
+            if(!Candidate.bTransition)return Candidate.FaceZ;
+            double height=Candidate.FaceZ;
+            Shape.ResolvedCeilingBottomAt(*Candidate.Stratum,X,Y,height);
+            return height;
+        };
         const auto AddVertex=[&](int32 X,int32 Y)
         {
             const std::size_t GridIndex=static_cast<std::size_t>(Y*GridSide+X);
@@ -1286,8 +1393,20 @@ inline void AppendStratumBoundaryCeilings(const FStandaloneOwnerWorld& World,
             if(Mapped!=INDEX_NONE)return Mapped;
             Mapped=static_cast<int32>(NewVertices.size());
             const double WorldX=Origin.X+X*GridStep,WorldY=Origin.Y+Y*GridStep;
-            NewVertices.emplace_back(WorldX*VoxelSizeCm,WorldY*VoxelSizeCm,CeilingZ*VoxelSizeCm);
-            NewNormals.emplace_back(0.0,0.0,-1.0);
+            const double FaceZ=Candidate.FaceHeights[GridIndex];
+            FVector Normal(0.0,0.0,-1.0);
+            if(Candidate.bTransition)
+            {
+                const double Delta=std::max(1.0,std::min<double>(GridStep,4.0));
+                const double DX=(heightAt(WorldX+Delta,WorldY)-heightAt(WorldX-Delta,WorldY))
+                    /(2.0*Delta);
+                const double DY=(heightAt(WorldX,WorldY+Delta)-heightAt(WorldX,WorldY-Delta))
+                    /(2.0*Delta);
+                Normal=FVector(DX,DY,-1.0);
+                Normal.Normalize();
+            }
+            NewVertices.emplace_back(WorldX*VoxelSizeCm,WorldY*VoxelSizeCm,FaceZ*VoxelSizeCm);
+            NewNormals.push_back(Normal);
             if(bHasUVs)NewUVs.emplace_back(static_cast<float>(WorldX),static_cast<float>(WorldY));
             if(bHasColors)NewColors.push_back(Color);
             return Mapped;
@@ -1300,15 +1419,40 @@ inline void AppendStratumBoundaryCeilings(const FStandaloneOwnerWorld& World,
                 ||!Candidate.SolidAbove[I01]||!Candidate.SolidAbove[I11])continue;
             const double CellX0=Origin.X+X*GridStep,CellY0=Origin.Y+Y*GridStep;
             const double CellX1=CellX0+GridStep,CellY1=CellY0+GridStep;
-            // Suppress a coincident plane only when it covers the full cell. A hit at just the
-            // center of a curved shell triangle is not enough to leave the rest of this cap cell open.
-            if(MeshIndex.HasDownwardCellCoverage(CellX0,CellY0,CellX1,CellY1,CeilingZ,0.001))continue;
+            bool fullyCovered=false;
+            if(!Candidate.bTransition)
+                fullyCovered=MeshIndex.HasDownwardCellCoverage(
+                    CellX0,CellY0,CellX1,CellY1,Candidate.FaceZ,0.001);
+            else
+            {
+                fullyCovered=true;
+                constexpr double CoverageSamples[5][2]={
+                    {0.0,0.0},{1.0,0.0},{0.0,1.0},{1.0,1.0},{0.5,0.5}};
+                for(const auto& Sample:CoverageSamples)
+                {
+                    const double U=Sample[0],V=Sample[1];
+                    const double SampleX=CellX0+(CellX1-CellX0)*U;
+                    const double SampleY=CellY0+(CellY1-CellY0)*V;
+                    const double SampleZ=heightAt(SampleX,SampleY);
+                    if(!MeshIndex.HasDownwardHit(SampleX,SampleY,SampleZ,0.25))
+                        fullyCovered=false;
+                }
+            }
+            if(fullyCovered)continue;
+            if(Key.Level>=4&&Candidate.bTransition)
+                Replacement.Cells[static_cast<std::size_t>(Y)*(GridSide-1)+X]=1;
             const int32 A=AddVertex(X,Y),B=AddVertex(X+1,Y);
             const int32 C=AddVertex(X+1,Y+1),D=AddVertex(X,Y+1);
             NewTriangles.insert(NewTriangles.end(),{A,C,B,A,D,C});
         }
+        if(Key.Level>=4&&Candidate.bTransition
+            &&std::any_of(Replacement.Cells.begin(),Replacement.Cells.end(),
+                [](uint8 Value){return Value!=0;}))
+            Replacements.push_back(std::move(Replacement));
     }
     if(NewTriangles.empty())return;
+    const int32 removedCoarse=RemoveCoarseTransitionFaceTriangles(Mesh,Origin,GridStep,
+        GridSide,VoxelSizeCm,Replacements,false);
 
     const int32 AddedVertices=static_cast<int32>(NewVertices.size());
     auto InsertVertices=[&](auto& Existing,const auto& Added)
@@ -1347,9 +1491,8 @@ inline void AppendStratumBoundaryCeilings(const FStandaloneOwnerWorld& World,
     Mesh.NumCeilingTriangles+=static_cast<int32>(NewTriangles.size()/3);
 }
 
-// Add the interior-facing top of each bedrock band. The density composition already
-// makes this band solid and editable; this planar closure keeps its visible floor
-// continuous when a coarse marching-cubes step would otherwise skip a sub-voxel band.
+// Fill only top cells that marching cubes missed. Active transitions use the same
+// displaced face and passage-mouth fade as the signed-distance field.
 inline void AppendStratumBoundaryFloors(const FStandaloneOwnerWorld& World,
     const FStandaloneShapeWorld& Shape,const FVoxelTileKey& Key,int32 Step,FVoxelMeshData& Mesh)
 {
@@ -1358,8 +1501,16 @@ inline void AppendStratumBoundaryFloors(const FStandaloneOwnerWorld& World,
     const int32 Extent=Key.ExtentVoxels();
     if(Extent<=0||Extent%Step!=0)return;
     const int32 GridSide=Extent/Step+1;
-    struct FCandidate { double FloorZ=0.0; double Thickness=0.0; };
+    struct FCandidate
+    {
+        double FloorZ=0.0;
+        double Thickness=0.0;
+        double MaximumDisplacementVoxels=0.0;
+        const VoxelForgeCore::ResolvedLayoutStratumV2* Stratum=nullptr;
+        bool bTransition=false;
+    };
     std::vector<FCandidate> Candidates;
+    std::vector<FTransitionFaceReplacement> Replacements;
     const double CoreMicrons=std::max<std::uint32_t>(1,World.CoreVoxelSizeMicrons);
     for(const FStrateSlot& Slot:World.Manager->GetLayout())
     {
@@ -1367,9 +1518,17 @@ inline void AppendStratumBoundaryFloors(const FStandaloneOwnerWorld& World,
         if(!Stratum||!Stratum->bedrock.presentInCurrentField
             ||Stratum->bedrock.topMicrometres<=Stratum->bedrock.bottomMicrometres)continue;
         const double FloorZ=static_cast<double>(Stratum->bedrock.topMicrometres)/CoreMicrons;
-        if(FloorZ<Origin.Z-1.0e-6||FloorZ>Origin.Z+Extent+1.0e-6)continue;
+        const auto* transitionLower=Shape.FindResolvedLayoutStratumByOrder(Stratum->order+1);
+        const bool bTransition=transitionLower
+            &&Shape.IsResolvedLayoutTransitionActive(*Stratum);
+        const double displacement=bTransition
+            ?static_cast<double>(Shape.ResolvedTransitionMaximumFaceDisplacementMicrometres(
+                *Stratum,*transitionLower))/CoreMicrons
+            :0.0;
+        if(FloorZ<Origin.Z-displacement-1.0e-6
+            ||FloorZ>Origin.Z+Extent+displacement+1.0e-6)continue;
         Candidates.push_back({FloorZ,static_cast<double>(Stratum->bedrock.topMicrometres
-            -Stratum->bedrock.bottomMicrometres)/CoreMicrons});
+            -Stratum->bedrock.bottomMicrometres)/CoreMicrons,displacement,Stratum,bTransition});
     }
     if(Candidates.empty())return;
 
@@ -1390,16 +1549,34 @@ inline void AppendStratumBoundaryFloors(const FStandaloneOwnerWorld& World,
     {
         const double Epsilon=std::min(0.5,Candidate.Thickness*0.25);
         if(Epsilon<=0.0)continue;
-        std::vector<uint8> SolidBelow(static_cast<std::size_t>(GridSide)*GridSide,0);
+        const std::size_t GridCount=static_cast<std::size_t>(GridSide)*GridSide;
+        std::vector<double> faceHeights(GridCount,Candidate.FloorZ);
+        std::vector<uint8> solidBelow(GridCount,0);
+        FTransitionFaceReplacement Replacement;
+        Replacement.BaseZVoxels=Candidate.FloorZ;
+        Replacement.MaximumDisplacementVoxels=Candidate.MaximumDisplacementVoxels;
+        Replacement.Cells.resize(static_cast<std::size_t>(GridSide-1)*(GridSide-1),0);
         for(int32 Y=0;Y<GridSide;++Y)for(int32 X=0;X<GridSide;++X)
         {
             const double WorldX=Origin.X+X*Step,WorldY=Origin.Y+Y*Step;
+            const std::size_t GridIndex=static_cast<std::size_t>(Y*GridSide+X);
+            if(Candidate.bTransition)
+                Shape.ResolvedBedrockTopAt(*Candidate.Stratum,WorldX,WorldY,
+                    faceHeights[GridIndex]);
             const float Density=Shape.DensityAt(static_cast<float>(WorldX),static_cast<float>(WorldY),
-                static_cast<float>(Candidate.FloorZ-Epsilon));
-            SolidBelow[static_cast<std::size_t>(Y*GridSide+X)]=
+                static_cast<float>(faceHeights[GridIndex]-Epsilon));
+            solidBelow[GridIndex]=
                 std::isfinite(Density)&&Density<0.0f?1:0;
         }
-        std::vector<int32> VertexMap(static_cast<std::size_t>(GridSide)*GridSide,INDEX_NONE);
+        const auto heightAt=[&](double X,double Y)
+        {
+            if(!Candidate.bTransition)return Candidate.FloorZ;
+            double height=Candidate.FloorZ;
+            if(Candidate.bTransition)
+                Shape.ResolvedBedrockTopAt(*Candidate.Stratum,X,Y,height);
+            return height;
+        };
+        std::vector<int32> VertexMap(GridCount,INDEX_NONE);
         const auto AddVertex=[&](int32 X,int32 Y)
         {
             const std::size_t GridIndex=static_cast<std::size_t>(Y*GridSide+X);
@@ -1407,9 +1584,20 @@ inline void AppendStratumBoundaryFloors(const FStandaloneOwnerWorld& World,
             if(Mapped!=INDEX_NONE)return Mapped;
             Mapped=static_cast<int32>(NewVertices.size());
             const double WorldX=Origin.X+X*Step,WorldY=Origin.Y+Y*Step;
+            FVector Normal(0.0,0.0,1.0);
+            if(Candidate.bTransition)
+            {
+                const double Delta=std::max(1.0,std::min<double>(Step,4.0));
+                const double DX=(heightAt(WorldX+Delta,WorldY)-heightAt(WorldX-Delta,WorldY))
+                    /(2.0*Delta);
+                const double DY=(heightAt(WorldX,WorldY+Delta)-heightAt(WorldX,WorldY-Delta))
+                    /(2.0*Delta);
+                Normal=FVector(-DX,-DY,1.0);
+                Normal.Normalize();
+            }
             NewVertices.emplace_back(WorldX*VoxelSizeCm,WorldY*VoxelSizeCm,
-                Candidate.FloorZ*VoxelSizeCm);
-            NewNormals.emplace_back(0.0,0.0,1.0);
+                faceHeights[GridIndex]*VoxelSizeCm);
+            NewNormals.push_back(Normal);
             if(bHasUVs)NewUVs.emplace_back(static_cast<float>(WorldX),static_cast<float>(WorldY));
             if(bHasColors)NewColors.push_back(Color);
             return Mapped;
@@ -1418,16 +1606,43 @@ inline void AppendStratumBoundaryFloors(const FStandaloneOwnerWorld& World,
         {
             const std::size_t I00=static_cast<std::size_t>(Y*GridSide+X);
             const std::size_t I10=I00+1,I01=I00+GridSide,I11=I01+1;
-            if(!SolidBelow[I00]||!SolidBelow[I10]||!SolidBelow[I01]||!SolidBelow[I11])continue;
+            if(!solidBelow[I00]||!solidBelow[I10]||!solidBelow[I01]||!solidBelow[I11])continue;
             const double X0=Origin.X+X*Step,Y0=Origin.Y+Y*Step;
             const double X1=X0+Step,Y1=Y0+Step;
-            if(MeshIndex.HasUpwardCellCoverage(X0,Y0,X1,Y1,Candidate.FloorZ,0.001))continue;
+            bool fullyCovered=false;
+            if(!Candidate.bTransition)
+                fullyCovered=MeshIndex.HasUpwardCellCoverage(
+                    X0,Y0,X1,Y1,Candidate.FloorZ,0.001);
+            else
+            {
+                fullyCovered=true;
+                constexpr double CoverageSamples[5][2]={
+                    {0.0,0.0},{1.0,0.0},{0.0,1.0},{1.0,1.0},{0.5,0.5}};
+                for(const auto& Sample:CoverageSamples)
+                {
+                    const double U=Sample[0],V=Sample[1];
+                    const double SampleX=X0+(X1-X0)*U;
+                    const double SampleY=Y0+(Y1-Y0)*V;
+                    const double SampleZ=heightAt(SampleX,SampleY);
+                    if(!MeshIndex.HasUpwardHit(SampleX,SampleY,SampleZ,0.25))
+                        fullyCovered=false;
+                }
+            }
+            if(fullyCovered)continue;
+            if(Key.Level>=4&&Candidate.bTransition)
+                Replacement.Cells[static_cast<std::size_t>(Y)*(GridSide-1)+X]=1;
             const int32 A=AddVertex(X,Y),B=AddVertex(X+1,Y);
             const int32 C=AddVertex(X+1,Y+1),D=AddVertex(X,Y+1);
             NewTriangles.insert(NewTriangles.end(),{A,B,C,A,C,D});
         }
+        if(Key.Level>=4&&Candidate.bTransition
+            &&std::any_of(Replacement.Cells.begin(),Replacement.Cells.end(),
+                [](uint8 Value){return Value!=0;}))
+            Replacements.push_back(std::move(Replacement));
     }
     if(NewTriangles.empty())return;
+    const int32 removedCoarse=RemoveCoarseTransitionFaceTriangles(Mesh,Origin,Step,
+        GridSide,VoxelSizeCm,Replacements,true);
 
     const int32 AddedVertices=static_cast<int32>(NewVertices.size());
     auto InsertVertices=[&](auto& Existing,const auto& Added)

Standalone/Core/src/FloatingIslandsInternal.h

@@ -1,6 +1,9 @@
 #pragma once
 
 #include "VoxelForgeCore/ThreadLocalStorage.h"
+#include "VoxelForgeCore/CpuCycleCounter.h"
+#include "VoxelForgeCore/FloatingIslandInstrumentation.h"
+#include "VoxelForgeCore/SharedColumnCache.h"
 #include "Json.h"
 #include "VoxelForgeCore/VoxelForgeCore.h"
 
@@ -203,6 +206,7 @@ namespace floating_island_detail
         HashWord(hash, static_cast<std::uint64_t>(recipe.boundarySealSubvoxels), 8);
         HashWord(hash, static_cast<std::uint64_t>(recipe.bridgeHalfWidthSubvoxels), 8);
         HashWord(hash, static_cast<std::uint64_t>(recipe.bridgeThicknessSubvoxels), 8);
+        if(recipe.terrainFollowingRoute)HashWord(hash,1,1);
         HashWord(hash, HashRouteConstraints(recipe.routeConstraints), 8);
         return hash;
     }
@@ -470,13 +474,69 @@ namespace floating_island_detail
         double DeltaX=0.0,DeltaY=0.0,Radial=0.0,Angle=0.0,LobePhase=0.0,TopSurface=0.0;
     };
 
+    struct FIslandColumnCacheInstrumentation
+    {
+        std::uint64_t localHits=0,localMisses=0,localConflictReplacements=0;
+        std::uint64_t localProbeCycles=0,localProbeSamples=0;
+        std::uint64_t tileStartCycles=0,tileCycles=0;
+        VoxelForgeCoreShared::FColumnCacheMetrics shared;
+        FIslandFieldAttributionInstrumentation attribution;
+    };
+
+    inline FIslandColumnCacheInstrumentation*& ActiveIslandColumnCacheInstrumentation() noexcept
+    {
+        static thread_local FIslandColumnCacheInstrumentation* active=nullptr;
+        return active;
+    }
+
+    inline FIslandColumnCacheInstrumentation* SetIslandColumnCacheInstrumentation(
+        FIslandColumnCacheInstrumentation* value) noexcept
+    {
+        FIslandColumnCacheInstrumentation* previous=ActiveIslandColumnCacheInstrumentation();
+        ActiveIslandColumnCacheInstrumentation()=value;
+        SetActiveIslandFieldAttribution(value?&value->attribution:nullptr);
+        return previous;
+    }
+
     using FSharedIslandColumnCache =
         VoxelForgeCoreShared::TSharedColumnValueCache<FIslandColumnCacheEntry,16384,4>;
 
+    struct FIslandColumnTraceKey
+    {
+        bool valid=false;
+        std::uint64_t recipeHash=0,planHash=0,island=0;
+        std::int64_t x=0,y=0;
+    };
+
+    struct FIslandColumnReuseTrace
+    {
+        std::array<FIslandColumnTraceKey,128> recentMisses{};
+        std::array<FIslandColumnTraceKey,128> recentEvictions{};
+        std::uint64_t missSequence=0,printedEvents=0;
+    };
+
+    inline bool SameTraceKey(const FIslandColumnTraceKey& left,
+                             const FIslandColumnTraceKey& right) noexcept
+    {
+        return left.valid&&right.valid&&left.recipeHash==right.recipeHash
+            &&left.planHash==right.planHash&&left.island==right.island
+            &&left.x==right.x&&left.y==right.y;
+    }
+
+    inline std::size_t TraceKeyIndex(const FIslandColumnTraceKey& key) noexcept
+    {
+        std::uint64_t hash=key.island^static_cast<std::uint64_t>(key.x)*0x9e3779b97f4a7c15ull
+            ^static_cast<std::uint64_t>(key.y)*0xc2b2ae3d27d4eb4full
+            ^key.recipeHash^std::rotl(key.planHash,17);
+        hash^=hash>>33;hash*=0xff51afd7ed558ccdull;hash^=hash>>33;
+        return static_cast<std::size_t>(hash&127u);
+    }
+
     inline const FIslandColumnCacheEntry& IslandColumnCache(
         const FloatingIslandRecipeV1& recipe,const FloatingIslandPlanV1& plan,
         const FloatingIslandAnchorV1& island,double x,double y)
     {
+        FScopedIslandAttributionTimer columnTimer(EIslandAttributionBucket::Column);
         // Density samples arrive on integer Core lattice columns; reuse the exact column metrics
         // across Z samples without changing the field value or touching shared world state.
         // Les echantillons suivent les colonnes Core entieres; reutiliser les memes metriques XY.
@@ -486,6 +546,7 @@ namespace floating_island_detail
         static thread_local VoxelForgeCoreThreadLocal::FLazy<
             std::array<FIslandColumnCacheEntry,SetCount*Ways>> Cache;
         auto& cache=Cache.Get();
+        FScopedIslandAttributionTimer localProbeTimer(EIslandAttributionBucket::LocalProbe);
         const std::int64_t SampleX=static_cast<std::int64_t>(x);
         const std::int64_t SampleY=static_cast<std::int64_t>(y);
         std::uint64_t IndexKey=island.stableId
@@ -500,6 +561,7 @@ namespace floating_island_detail
         IndexKey^=IndexKey>>33;
         const std::size_t Base=static_cast<std::size_t>(IndexKey&(SetCount-1))*Ways;
         FIslandColumnCacheEntry* Replacement=&cache[Base+((IndexKey>>11)&(Ways-1))];
+        bool bFoundInvalid=false;
         for(std::size_t Way=0;Way<Ways;++Way)
         {
             FIslandColumnCacheEntry& Entry=cache[Base+Way];
@@ -515,8 +577,64 @@ namespace floating_island_detail
                 &&Entry.TopHalf==island.topHalfSubvoxels
                 &&Entry.TopFlattenQ16==recipe.topFlattenQ16
                 &&Entry.ContourWarp==recipe.contourWarpSubvoxels;
-            if(bKeyMatches)return Entry;
-            if(!Entry.bValid)Replacement=&Entry;
+            if(bKeyMatches)
+            {
+                if(auto* stats=ActiveIslandColumnCacheInstrumentation())++stats->localHits;
+                return Entry;
+            }
+            if(!Entry.bValid&&!bFoundInvalid)
+            {Replacement=&Entry;bFoundInvalid=true;}
+        }
+        localProbeTimer.Stop();
+        if(auto* stats=ActiveIslandColumnCacheInstrumentation())
+        {
+            ++stats->localMisses;
+            if(!bFoundInvalid)++stats->localConflictReplacements;
+            static thread_local FIslandColumnReuseTrace trace;
+            if((++trace.missSequence&1023u)==0)
+            {
+                auto& a=stats->attribution;
+                ++a.traceSampledMisses;
+                const FIslandColumnTraceKey requested{true,recipe.contentHash,
+                    plan.contentHash,island.stableId,SampleX,SampleY};
+                const std::size_t requestSlot=TraceKeyIndex(requested);
+                const bool seenBefore=SameTraceKey(trace.recentMisses[requestSlot],requested);
+                const bool reusedEviction=SameTraceKey(
+                    trace.recentEvictions[requestSlot],requested);
+                if(seenBefore)++a.traceSeenBefore;
+                if(reusedEviction)
+                {
+                    ++a.traceReusedEvictions;
+                    trace.recentEvictions[requestSlot].valid=false;
+                }
+                FIslandColumnTraceKey evicted{};
+                std::size_t replacementWay=0;
+                if(!bFoundInvalid&&Replacement)
+                {
+                    evicted={Replacement->bValid,Replacement->RecipeContentHash,
+                        Replacement->PlanContentHash,Replacement->StableId,
+                        Replacement->SampleX,Replacement->SampleY};
+                    replacementWay=static_cast<std::size_t>(Replacement-&cache[Base]);
+                    ++a.traceEvictions;
+                    if(evicted.valid)
+                        trace.recentEvictions[TraceKeyIndex(evicted)]=evicted;
+                }
+                trace.recentMisses[requestSlot]=requested;
+                if(trace.printedEvents<16&&a.traceCount<a.traceSet.size())
+                {
+                    const std::size_t event=a.traceCount++;
+                    ++trace.printedEvents;
+                    a.traceSet[event]=Base/Ways;
+                    a.traceX[event]=SampleX;a.traceY[event]=SampleY;
+                    a.traceIsland[event]=island.stableId;
+                    a.traceEvictedX[event]=evicted.valid?evicted.x:0;
+                    a.traceEvictedY[event]=evicted.valid?evicted.y:0;
+                    a.traceEvictedIsland[event]=evicted.valid?evicted.island:0;
+                    a.traceFlags[event]=static_cast<std::uint8_t>(
+                        (!bFoundInvalid?1u:0u)|(seenBefore?2u:0u)|(reusedEviction?4u:0u)
+                        |(replacementWay<<3));
+                }
+            }
         }
 
         const auto build=[&]()
@@ -543,9 +661,14 @@ namespace floating_island_detail
             Entry.Radial=std::hypot(Entry.DeltaX,Entry.DeltaY);
             Entry.Angle=std::atan2(Entry.DeltaY,Entry.DeltaX);
             Entry.LobePhase=LobePhase(recipe,island);
+            double contourOffset=0.0;
+            {
+                FScopedIslandAttributionTimer helixTimer(EIslandAttributionBucket::Helix);
+                contourOffset=LobeOffsetWithPhase(recipe,Entry.Angle,
+                    static_cast<double>(island.topZSubvoxels),Entry.LobePhase);
+            }
             const double EffectiveRadius=std::max(1.0,static_cast<double>(island.radiusSubvoxels)
-                +LobeOffsetWithPhase(recipe,Entry.Angle,static_cast<double>(island.topZSubvoxels),
-                    Entry.LobePhase));
+                +contourOffset);
             const double Edge=std::clamp(Entry.Radial/EffectiveRadius,0.0,1.0);
             const double Drop=(1.0-Q16ToDouble(recipe.topFlattenQ16))
                 *static_cast<double>(island.topHalfSubvoxels)*2.0*Edge*Edge;
@@ -561,7 +684,12 @@ namespace floating_island_detail
                 static_cast<std::uint64_t>(reinterpret_cast<std::uintptr_t>(&plan)),
                 plan.contentHash,SampleX,SampleY,island.stableId};
             bool computed=false;
-            Entry=shared->getOrCompute(key,build,computed);
+            auto* stats=ActiveIslandColumnCacheInstrumentation();
+            {
+                FScopedIslandAttributionTimer sharedCacheTimer(EIslandAttributionBucket::SharedCache);
+                Entry=shared->getOrCompute(key,build,computed,
+                    stats?&stats->shared:nullptr);
+            }
         }
         else Entry=build();
         *Replacement=Entry;
@@ -624,6 +752,7 @@ namespace floating_island_detail
                                   const FloatingIslandAnchorV1& island,
                                   std::int32_t rootIndex, double x, double y, double z)
     {
+        FScopedIslandAttributionTimer attributionTimer(EIslandAttributionBucket::Root);
         // Cache derived root constants per worker. The complete immutable input key keeps this
         // value-only cache safe across worlds, epochs and worker schedules.
         // Mettre en cache les constantes par worker; la cle complete evite tout partage d'etat.
@@ -694,6 +823,38 @@ namespace floating_island_detail
         return (std::sqrt(std::max(q, 0.0)) - 1.0) * Parameters.MinimumRadius;
     }
 
+    inline FRootLobeParameters RootLobeParametersForBounds(
+        const FloatingIslandRecipeV1& recipe,const FloatingIslandAnchorV1& island,
+        std::int32_t rootIndex)
+    {
+        constexpr std::array<std::array<double,2>,4> pattern{{
+            {{-0.92,-0.12}},{{0.28,0.98}},{{0.83,-0.42}},{{-0.16,-0.94}}}};
+        const std::uint64_t salt=0x524f4f540000ull+static_cast<std::uint64_t>(rootIndex);
+        const std::uint64_t roll=Roll(recipe.seed,island.stableId,salt);
+        const double radius=static_cast<double>(island.radiusSubvoxels);
+        const double rootDepth=radius*Q16ToDouble(recipe.rootDepthRatioQ16);
+        const double crustBottom=static_cast<double>(IslandCrustBottom(recipe,island));
+        const bool centralButtress=rootIndex==4;
+        const double orbit=centralButtress?0.0:radius*(0.17+0.07*UnitHash(roll));
+        const double rootX=static_cast<double>(island.centerSubvoxels[0])
+            +(centralButtress?0.0:pattern[static_cast<std::size_t>(rootIndex)][0]*orbit);
+        const double rootY=static_cast<double>(island.centerSubvoxels[1])
+            +(centralButtress?0.0:pattern[static_cast<std::size_t>(rootIndex)][1]*orbit);
+        const double shortRootVariation=UnitHash(Roll(recipe.seed,island.stableId,salt^0x4c454eull));
+        const double lengthRatio=centralButtress?1.0:(rootIndex==0?1.0
+            :Q16ToDouble(island.taperEndQ16)*(0.82+0.18*shortRootVariation));
+        const double lowerDepth=rootDepth*lengthRatio;
+        const double embedDepth=rootDepth*(centralButtress?0.22:(rootIndex==0?0.30:0.22));
+        const double verticalRadius=0.5*(lowerDepth+embedDepth);
+        const double centerZ=crustBottom+0.5*(embedDepth-lowerDepth);
+        const double rx=radius*(centralButtress?0.25
+            :0.15+0.055*UnitHash(Roll(recipe.seed,island.stableId,salt^0x5258ull)));
+        const double ry=radius*(centralButtress?0.25
+            :0.15+0.065*UnitHash(Roll(recipe.seed,island.stableId,salt^0x5259ull)));
+        return {rootX,rootY,centerZ,rx*rx,ry*ry,verticalRadius*verticalRadius,
+            std::min({rx,ry,verticalRadius})};
+    }
+
     inline double ApplySurfaceDetail(const FloatingIslandRecipeV1& recipe,
                                      std::uint64_t featureId, double structural,
                                      double x, double y, double z, double detailScale = 1.0)
@@ -712,6 +873,7 @@ namespace floating_island_detail
                                 const FloatingIslandAnchorV1& island,
                                 double x, double y, double z)
     {
+        FScopedIslandAttributionTimer islandTimer(EIslandAttributionBucket::Island);
         if (recipe.geometryVersion < 2)
         {
             const double dx = x - static_cast<double>(island.centerSubvoxels[0]);
@@ -739,8 +901,13 @@ namespace floating_island_detail
         const double radial=Column.Radial;
         const double topZ = static_cast<double>(island.topZSubvoxels);
         const double radius = static_cast<double>(island.radiusSubvoxels);
+        double contourOffset=0.0;
+        {
+            FScopedIslandAttributionTimer helixTimer(EIslandAttributionBucket::Helix);
+            contourOffset=LobeOffsetWithPhase(recipe,Column.Angle,z,Column.LobePhase);
+        }
         const double effectiveRadius = std::max(0.0,
-            radius + LobeOffsetWithPhase(recipe,Column.Angle,z,Column.LobePhase));
+            radius + contourOffset);
         const double edge = std::clamp(radial / std::max(effectiveRadius, 1.0), 0.0, 1.0);
         const double lowerSurface = static_cast<double>(IslandCrustBottom(recipe, island))
             + radius * 0.16 * edge * edge;
@@ -787,6 +954,7 @@ namespace floating_island_detail
                                    bool* topSurface = nullptr,
                                    double* alongFraction = nullptr)
     {
+        FScopedIslandAttributionTimer connectorTimer(EIslandAttributionBucket::Connector);
         const double ax = static_cast<double>(edge.startSubvoxels[0]);
         const double ay = static_cast<double>(edge.startSubvoxels[1]);
         const double az = static_cast<double>(edge.startSubvoxels[2]);
@@ -805,15 +973,266 @@ namespace floating_island_detail
         const double t = std::clamp(along / length, 0.0, 1.0);
         if (alongFraction) *alongFraction = t;
         const double deck = az + (static_cast<double>(edge.endSubvoxels[2]) - az) * t;
+        const std::uint64_t westernEdgeId = StableId(recipe.seed, 0x200000000ull,
+            0x425249444745ull);
+        const bool westernSupportConnector=edge.stableId==westernEdgeId;
+        if(recipe.geometryVersion>=2&&WorldAssemblyEvaluatorVersion>=183
+            &&westernSupportConnector)
+        {
+            const double phase=static_cast<double>(Roll(recipe.seed,edge.stableId,0x5749445448ull)
+                &0xffffffffull)*(2.0*Pi/4294967296.0);
+            const double localHalfWidth=std::max(
+                static_cast<double>(recipe.routeConstraints.capsuleRadiusSubvoxels+Q),
+                static_cast<double>(edge.halfWidthSubvoxels)
+                    +0.48*static_cast<double>(Q)*std::sin(6.0*Pi*t+phase));
+            const double localThickness=static_cast<double>(edge.thicknessSubvoxels);
+            const double rounding=std::min({1.5*static_cast<double>(Q),
+                localHalfWidth*0.6,localThickness*0.45});
+            const double roundedX=side-(localHalfWidth-rounding);
+            const double roundedY=std::abs(along-0.5*length)-(0.5*length-rounding);
+            const double roundedZ=std::abs(z-(deck-0.5*localThickness))
+                -(0.5*localThickness-rounding);
+            const double roundedOutside=std::sqrt(
+                std::pow(std::max(roundedX,0.0),2)
+                +std::pow(std::max(roundedY,0.0),2)
+                +std::pow(std::max(roundedZ,0.0),2));
+            const double roundedInside=std::min(std::max(roundedX,
+                std::max(roundedY,roundedZ)),0.0);
+            if(topSurface)*topSurface=z-deck>=std::max(horizontal,
+                deck-localThickness-z);
+            return roundedOutside+roundedInside-rounding;
+        }
         const double arch = recipe.geometryVersion >= 2
-            ? 2.0 * static_cast<double>(edge.thicknessSubvoxels) * (4.0 * t * (1.0 - t))
-            : 0.0;
+                && WorldAssemblyEvaluatorVersion < 172
+                ? 2.0 * static_cast<double>(edge.thicknessSubvoxels) * (4.0 * t * (1.0 - t))
+                : 0.0;
         const double upper = z - deck;
         const double lower = deck - static_cast<double>(edge.thicknessSubvoxels) - arch - z;
         if (topSurface) *topSurface = upper >= std::max(horizontal, lower);
         return std::max({horizontal, upper, lower});
     }
 
+    struct FScalarRange
+    {
+        double minimum=0.0,maximum=0.0;
+    };
+
+    struct FDensityRange
+    {
+        double minimum=0.0,maximum=0.0;
+    };
+
+    inline double DistanceToRange(double minimum,double maximum,double value)
+    {
+        if(value<minimum)return minimum-value;
+        if(value>maximum)return value-maximum;
+        return 0.0;
+    }
+
+    inline double MaximumDistanceToRange(double minimum,double maximum,double value)
+    {
+        return std::max(std::abs(minimum-value),std::abs(maximum-value));
+    }
+
+    inline FScalarRange AffineRange(double xMinimum,double xMaximum,double xOffset,
+        double xScale,double yMinimum,double yMaximum,double yOffset,double yScale)
+    {
+        const double xa=(xMinimum-xOffset)*xScale,xb=(xMaximum-xOffset)*xScale;
+        const double ya=(yMinimum-yOffset)*yScale,yb=(yMaximum-yOffset)*yScale;
+        return {std::min(xa,xb)+std::min(ya,yb),
+            std::max(xa,xb)+std::max(ya,yb)};
+    }
+
+    inline FScalarRange AbsoluteRange(double minimum,double maximum)
+    {
+        const double minimumAbsolute=minimum<=0.0&&maximum>=0.0
+            ?0.0:std::min(std::abs(minimum),std::abs(maximum));
+        return {minimumAbsolute,std::max(std::abs(minimum),std::abs(maximum))};
+    }
+
+    inline double RectangleSdf(double x,double y)
+    {
+        return std::hypot(std::max(x,0.0),std::max(y,0.0))
+            +std::min(std::max(x,y),0.0);
+    }
+
+    inline double RoundedBoxSdf(double x,double y,double z)
+    {
+        return std::sqrt(std::max(x,0.0)*std::max(x,0.0)
+            +std::max(y,0.0)*std::max(y,0.0)
+            +std::max(z,0.0)*std::max(z,0.0))
+            +std::min(std::max(x,std::max(y,z)),0.0);
+    }
+
+    inline FDensityRange RootLobeRange(const FloatingIslandRecipeV1& recipe,
+        const FloatingIslandAnchorV1& island,std::int32_t rootIndex,
+        const std::array<double,3>& minimum,const std::array<double,3>& maximum)
+    {
+        const FRootLobeParameters root=RootLobeParametersForBounds(recipe,island,rootIndex);
+        const double dxMinimum=DistanceToRange(minimum[0],maximum[0],root.RootX);
+        const double dyMinimum=DistanceToRange(minimum[1],maximum[1],root.RootY);
+        const double dzMinimum=DistanceToRange(minimum[2],maximum[2],root.CenterZ);
+        const double dxMaximum=MaximumDistanceToRange(minimum[0],maximum[0],root.RootX);
+        const double dyMaximum=MaximumDistanceToRange(minimum[1],maximum[1],root.RootY);
+        const double dzMaximum=MaximumDistanceToRange(minimum[2],maximum[2],root.CenterZ);
+        const double qMinimum=dxMinimum*dxMinimum/root.RadiusXSquared
+            +dyMinimum*dyMinimum/root.RadiusYSquared
+            +dzMinimum*dzMinimum/root.VerticalRadiusSquared;
+        const double qMaximum=dxMaximum*dxMaximum/root.RadiusXSquared
+            +dyMaximum*dyMaximum/root.RadiusYSquared
+            +dzMaximum*dzMaximum/root.VerticalRadiusSquared;
+        return {(std::sqrt(std::max(qMinimum,0.0))-1.0)*root.MinimumRadius,
+            (std::sqrt(std::max(qMaximum,0.0))-1.0)*root.MinimumRadius};
+    }
+
+    inline FDensityRange IslandDensityRange(const FloatingIslandRecipeV1& recipe,
+        const FloatingIslandAnchorV1& island,const std::array<double,3>& minimum,
+        const std::array<double,3>& maximum)
+    {
+        const double radius=static_cast<double>(island.radiusSubvoxels);
+        const double contour=static_cast<double>(recipe.contourWarpSubvoxels);
+        const double radialMinimum=std::hypot(
+            DistanceToRange(minimum[0],maximum[0],
+                static_cast<double>(island.centerSubvoxels[0])),
+            DistanceToRange(minimum[1],maximum[1],
+                static_cast<double>(island.centerSubvoxels[1])));
+        const double radialMaximum=std::max({
+            std::hypot(minimum[0]-island.centerSubvoxels[0],minimum[1]-island.centerSubvoxels[1]),
+            std::hypot(minimum[0]-island.centerSubvoxels[0],maximum[1]-island.centerSubvoxels[1]),
+            std::hypot(maximum[0]-island.centerSubvoxels[0],minimum[1]-island.centerSubvoxels[1]),
+            std::hypot(maximum[0]-island.centerSubvoxels[0],maximum[1]-island.centerSubvoxels[1])});
+
+        const double top=static_cast<double>(island.topZSubvoxels);
+        const double topDrop=std::max(0.0,(1.0-Q16ToDouble(recipe.topFlattenQ16))
+            *static_cast<double>(island.topHalfSubvoxels)*2.0);
+        const double topDistanceMinimum=minimum[2]-top;
+        const double topDistanceMaximum=maximum[2]-(top-topDrop);
+        const double sideDistanceMinimum=radialMinimum-std::max(0.0,radius+contour);
+        const double sideDistanceMaximum=recipe.geometryVersion<2
+            ?radialMaximum:radialMaximum-std::max(0.0,radius-contour);
+        double lowerMinimum=0.0,lowerMaximum=0.0;
+        if(recipe.geometryVersion<2)
+        {
+            const double bottom=static_cast<double>(island.bottomZSubvoxels);
+            lowerMinimum=bottom-maximum[2];
+            lowerMaximum=bottom-minimum[2];
+        }
+        else
+        {
+            const double crust=static_cast<double>(IslandCrustBottom(recipe,island));
+            lowerMinimum=crust-maximum[2];
+            lowerMaximum=crust+radius*0.16-minimum[2];
+        }
+        double structuralMinimum=std::max({topDistanceMinimum,
+            sideDistanceMinimum,lowerMinimum});
+        double structuralMaximum=std::max({topDistanceMaximum,
+            sideDistanceMaximum,lowerMaximum});
+
+        if(recipe.geometryVersion>=2)
+        {
+            const double rootBlend=std::clamp(radius*0.12,2.0*Q,5.0*Q);
+            for(std::int32_t root=0;root<RootCount(recipe,island);++root)
+            {
+                const FDensityRange rootRange=RootLobeRange(recipe,island,root,minimum,maximum);
+                structuralMinimum=std::min(structuralMinimum,rootRange.minimum)-rootBlend*0.25;
+                structuralMaximum=std::min(structuralMaximum,rootRange.maximum);
+            }
+            if(recipe.geometryVersion>=5&&recipe.geometryVersion<8
+                &&island.ordinal==recipe.anchorIslandOrdinal
+                &&recipe.anchorRootBottomZSubvoxels<island.bottomZSubvoxels)
+            {
+                const double rootTop=static_cast<double>(IslandCrustBottom(recipe,island));
+                const double rootBottom=static_cast<double>(recipe.anchorRootBottomZSubvoxels);
+                const double rootRadius=static_cast<double>(recipe.anchorRootRadiusSubvoxels);
+                const double anchorMinimum=std::max({radialMinimum-rootRadius,
+                    rootBottom-maximum[2],minimum[2]-rootTop});
+                const double anchorMaximum=std::max({radialMaximum-0.92*rootRadius,
+                    rootBottom-minimum[2],maximum[2]-rootTop});
+                const double anchorDetail=0.75*static_cast<double>(recipe.roughnessSubvoxels);
+                const double anchorBlend=std::clamp(rootRadius*0.12,3.0*Q,6.0*Q);
+                structuralMinimum=std::min(structuralMinimum,anchorMinimum-anchorDetail)
+                    -anchorBlend*0.25;
+                structuralMaximum=std::min(structuralMaximum,anchorMaximum+anchorDetail);
+            }
+        }
+        const double finalDetail=static_cast<double>(recipe.roughnessSubvoxels);
+        return {structuralMinimum-finalDetail,structuralMaximum+finalDetail};
+    }
+
+    inline FDensityRange ConnectorDensityRange(const FloatingIslandRecipeV1& recipe,
+        const FloatingIslandConnectorV1& edge,const std::array<double,3>& minimum,
+        const std::array<double,3>& maximum)
+    {
+        const double ax=static_cast<double>(edge.startSubvoxels[0]);
+        const double ay=static_cast<double>(edge.startSubvoxels[1]);
+        const double az=static_cast<double>(edge.startSubvoxels[2]);
+        const double dx=static_cast<double>(edge.endSubvoxels[0])-ax;
+        const double dy=static_cast<double>(edge.endSubvoxels[1])-ay;
+        const double dz=static_cast<double>(edge.endSubvoxels[2])-az;
+        const double length=std::hypot(dx,dy);
+        if(!(length>0.0))return {static_cast<double>(MaxDensity),static_cast<double>(MaxDensity)};
+        const double ux=dx/length,uy=dy/length;
+        const FScalarRange along=AffineRange(minimum[0],maximum[0],ax,ux,
+            minimum[1],maximum[1],ay,uy);
+        const FScalarRange signedSide=AffineRange(minimum[0],maximum[0],ax,-uy,
+            minimum[1],maximum[1],ay,ux);
+        const FScalarRange side=AbsoluteRange(signedSide.minimum,signedSide.maximum);
+        const double qxMinimum=side.minimum-static_cast<double>(edge.halfWidthSubvoxels);
+        const double qxMaximum=side.maximum-static_cast<double>(edge.halfWidthSubvoxels);
+        const FScalarRange alongCenter=AbsoluteRange(along.minimum-0.5*length,
+            along.maximum-0.5*length);
+        const double qyMinimum=alongCenter.minimum-0.5*length;
+        const double qyMaximum=alongCenter.maximum-0.5*length;
+        const double horizontalMinimum=RectangleSdf(qxMinimum,qyMinimum);
+        const double horizontalMaximum=RectangleSdf(qxMaximum,qyMaximum);
+
+        const double tMinimum=std::clamp(along.minimum/length,0.0,1.0);
+        const double tMaximum=std::clamp(along.maximum/length,0.0,1.0);
+        const double deckAtMinimum=az+dz*tMinimum;
+        const double deckAtMaximum=az+dz*tMaximum;
+        const double deckMinimum=std::min(deckAtMinimum,deckAtMaximum);
+        const double deckMaximum=std::max(deckAtMinimum,deckAtMaximum);
+        const std::uint64_t westernEdgeId=StableId(recipe.seed,0x200000000ull,
+            0x425249444745ull);
+        const bool westernSupportConnector=edge.stableId==westernEdgeId;
+        if(recipe.geometryVersion>=2&&WorldAssemblyEvaluatorVersion>=183
+            &&westernSupportConnector)
+        {
+            const double minimumHalfWidth=static_cast<double>(recipe.routeConstraints.capsuleRadiusSubvoxels+Q);
+            const double baseHalfWidth=static_cast<double>(edge.halfWidthSubvoxels);
+            const double halfWidthMinimum=std::max(minimumHalfWidth,baseHalfWidth-0.48*Q);
+            const double halfWidthMaximum=std::max(minimumHalfWidth,baseHalfWidth+0.48*Q);
+            const double roundingMinimum=std::min({1.5*Q,halfWidthMinimum*0.6,
+                static_cast<double>(edge.thicknessSubvoxels)*0.45});
+            const double roundingMaximum=std::min({1.5*Q,halfWidthMaximum*0.6,
+                static_cast<double>(edge.thicknessSubvoxels)*0.45});
+            const double roundedXMinimum=side.minimum-halfWidthMaximum+roundingMinimum;
+            const double roundedXMaximum=side.maximum-halfWidthMinimum+roundingMaximum;
+            const double roundedYMinimum=alongCenter.minimum-0.5*length+roundingMinimum;
+            const double roundedYMaximum=alongCenter.maximum-0.5*length+roundingMaximum;
+            const double halfThickness=0.5*static_cast<double>(edge.thicknessSubvoxels);
+            const double centerMinimum=deckMinimum-halfThickness;
+            const double centerMaximum=deckMaximum-halfThickness;
+            const double differenceMinimum=minimum[2]-centerMaximum;
+            const double differenceMaximum=maximum[2]-centerMinimum;
+            const FScalarRange absoluteDifference=AbsoluteRange(differenceMinimum,differenceMaximum);
+            const double roundedZMinimum=absoluteDifference.minimum-halfThickness+roundingMinimum;
+            const double roundedZMaximum=absoluteDifference.maximum-halfThickness+roundingMaximum;
+            return {RoundedBoxSdf(roundedXMinimum,roundedYMinimum,roundedZMinimum),
+                RoundedBoxSdf(roundedXMaximum,roundedYMaximum,roundedZMaximum)};
+        }
+
+        const double thickness=static_cast<double>(edge.thicknessSubvoxels);
+        const double maximumArch=recipe.geometryVersion>=2&&WorldAssemblyEvaluatorVersion<172
+            ?2.0*thickness:0.0;
+        const double upperMinimum=minimum[2]-deckMaximum;
+        const double upperMaximum=maximum[2]-deckMinimum;
+        const double lowerMinimum=deckMinimum-thickness-maximumArch-maximum[2];
+        const double lowerMaximum=deckMaximum-thickness-minimum[2];
+        return {std::max({horizontalMinimum,upperMinimum,lowerMinimum}),
+            std::max({horizontalMaximum,upperMaximum,lowerMaximum})};
+    }
+
     inline std::int64_t FieldDensity(const FloatingIslandRecipeV1& recipe,
                                      const FloatingIslandPlanV1& plan,
                                      std::int64_t x, std::int64_t y, std::int64_t z)
@@ -1174,8 +1593,8 @@ namespace floating_island_detail
         // Land each connector well inside the broad top so the full capsule footprint remains
         // supported across the bridge-to-island transition, including bounded surface roughness.
         // Les connecteurs recouvrent le plateau pour soutenir toute la capsule au raccord.
-        // Keep the narrow span exposed to open sky; a smaller fraction buries most of it in the island tops.
-        // Garder la passerelle etroite visible dans le vide ; une fraction plus faible l'enfouit dans les plateaux.
+        // Keep the capsule footprint supported while seating L37 connectors just below the native island tops.
+        // Garder l'appui de la capsule tout en enfouissant les connecteurs L37 juste sous les plateaux.
         const double landingFraction = recipe.geometryVersion >= 2 ? 0.52 : 0.62;
         const double fromReach = static_cast<double>(from.radiusSubvoxels) * landingFraction;
         const double toReach = static_cast<double>(to.radiusSubvoxels) * landingFraction;
@@ -1183,7 +1602,19 @@ namespace floating_island_detail
         const double sy = from.centerSubvoxels[1] + uy * fromReach;
         const double ex = to.centerSubvoxels[0] - ux * toReach;
         const double ey = to.centerSubvoxels[1] - uy * toReach;
-        const double routeDeckLift = recipe.geometryVersion >= 2 ? 1.0 * Q : 0.0;
+        const bool craterMouthConnector=WorldAssemblyEvaluatorVersion>=174
+            &&(from.ordinal==recipe.anchorIslandOrdinal
+                ||to.ordinal==recipe.anchorIslandOrdinal);
+        const bool westernSupportConnector=WorldAssemblyEvaluatorVersion>=178
+            &&((from.ordinal==0&&to.ordinal==1)||(from.ordinal==1&&to.ordinal==0));
+        const double routeDeckLift=recipe.geometryVersion>=2
+            ?(WorldAssemblyEvaluatorVersion>=178
+                ?(westernSupportConnector
+                    ?(WorldAssemblyEvaluatorVersion>=181?-1.0
+                        :(WorldAssemblyEvaluatorVersion>=180?-1.25
+                            :(WorldAssemblyEvaluatorVersion>=179?-1.5:-1.0))):-2.0)
+                :(craterMouthConnector?-2.0
+                    :(WorldAssemblyEvaluatorVersion>=172?-1.0:1.0)))*Q:0.0;
         const double sz = IslandTopSurface(recipe, from, sx, sy) + routeDeckLift;
         const double ez = IslandTopSurface(recipe, to, ex, ey) + routeDeckLift;
         edge.startSubvoxels = {RoundQ(sx), RoundQ(sy), RoundQ(sz)};
@@ -1336,6 +1767,7 @@ std::optional<FloatingIslandManifestV1> FloatingIslandManifestV1::FromJson(
                 manifest.recipe.anchorMouthOffsetSubvoxels))
         {error="floating-island geometry version 7 is missing a passage-rooted anchor field";return std::nullopt;}
     }
+    manifest.recipe.terrainFollowingRoute=recipeValue.Get("terrain_following_route").Boolean(false);
     if (!floating_island_detail::ReadU32(root.Get("schema_version"), schema)
         || !floating_island_detail::ReadHash(root.Get("content_hash"), manifestHash)
         || !floating_island_detail::ReadU32(recipeValue.Get("schema_version"), manifest.recipe.schemaVersion)
@@ -1495,6 +1927,7 @@ std::string FloatingIslandManifestV1::ToJson() const
             << ",\"anchor_island_minimum_radius_q\":" << recipe.anchorIslandMinimumRadiusSubvoxels
             << ",\"anchor_root_bottom_z_q\":" << recipe.anchorRootBottomZSubvoxels
             << ",\"anchor_mouth_offset_q\":" << recipe.anchorMouthOffsetSubvoxels;
+    if(recipe.terrainFollowingRoute)out << ",\"terrain_following_route\":true";
     out << ",\"blend_radius_q\":" << recipe.blendRadiusSubvoxels
         << ",\"contour_warp_q\":" << recipe.contourWarpSubvoxels
         << ",\"roughness_q\":" << recipe.roughnessSubvoxels
@@ -1746,6 +2179,26 @@ std::optional<FloatingIslandManifestV1> PlanFloatingIslandCluster(
             const std::int64_t y = floating_island_detail::RoundQ(
                 static_cast<double>(a.centerSubvoxels[1]) + dy * t);
             std::int64_t routeX=x,routeY=y;
+            if(WorldAssemblyEvaluatorVersion>=192&&recipe.terrainFollowingRoute
+                &&recipe.geometryVersion>=5
+                &&segment+2==count&&pieces>1)
+            {
+                const auto& anchor=islands[recipe.anchorIslandOrdinal];
+                const std::uint32_t side=static_cast<std::uint32_t>(
+                    floating_island_detail::UnitQ16(recipe.seed,anchor.stableId,
+                        0x414e43484f524d50ull)&1u);
+                const double length=std::hypot(dx,dy);
+                const double bend=10.0*floating_island_detail::Q
+                    *std::pow(std::sin(floating_island_detail::Pi*t),2.0);
+                const double sign=side?-1.0:1.0;
+                if(length>0.0)
+                {
+                    routeX=floating_island_detail::RoundQ(
+                        static_cast<double>(routeX)+sign*(-dy/length)*bend);
+                    routeY=floating_island_detail::RoundQ(
+                        static_cast<double>(routeY)+sign*(dx/length)*bend);
+                }
+            }
             if(recipe.geometryVersion>=5&&segment+2==count&&piece==pieces)
             {
                 const auto& anchor=islands[recipe.anchorIslandOrdinal];
@@ -1762,8 +2215,11 @@ std::optional<FloatingIslandManifestV1> PlanFloatingIslandCluster(
                 routeX=floating_island_detail::RoundQ(mouthX);
                 routeY=floating_island_detail::RoundQ(mouthY);
             }
-            const auto surface = floating_island_detail::FindCapsuleFootingTopZ(
-                recipe, manifest.plan, routeX, routeY);
+            const auto surface = WorldAssemblyEvaluatorVersion>=199
+                &&recipe.terrainFollowingRoute
+                ?floating_island_detail::FindSurfaceZ(recipe,manifest.plan,routeX,routeY)
+                :floating_island_detail::FindCapsuleFootingTopZ(
+                    recipe,manifest.plan,routeX,routeY);
             if (!surface)
             { error = "island planner could not find a full capsule-width support surface along its connector chain"; return std::nullopt; }
             WorldAssemblyRoutePointV1 point;
@@ -1830,14 +2286,19 @@ bool FloatingIslandFieldV1::isValid() const noexcept
 std::int64_t FloatingIslandFieldV1::densitySubvoxels(std::int64_t x,
     std::int64_t y, std::int64_t z) const noexcept
 {
+    floating_island_detail::FScopedIslandAttributionTimer fieldTimer(
+        floating_island_detail::EIslandAttributionBucket::Field);
     // The selected evaluator validates once; do not scan the plan twice per scoped sample.
     // L'evaluateur choisi valide une seule fois; ne pas reparcourir le plan a chaque echantillon.
+    std::int64_t density=floating_island_detail::MaxDensity;
     if (const auto* list = ScopedWorldAssemblyFeatureQueriesV1::find(recipe_, plan_, x, y, z))
-        return densitySubvoxelsForTile(x, y, z, *list);
-    if (!isValid() || !floating_island_detail::ValidScalar(x)
+        density=densitySubvoxelsForTile(x, y, z, *list);
+    else if (!isValid() || !floating_island_detail::ValidScalar(x)
         || !floating_island_detail::ValidScalar(y) || !floating_island_detail::ValidScalar(z))
-        return floating_island_detail::MaxDensity;
-    return floating_island_detail::FieldDensity(*recipe_, *plan_, x, y, z);
+        density=floating_island_detail::MaxDensity;
+    else density=floating_island_detail::FieldDensity(*recipe_, *plan_, x, y, z);
+    fieldTimer.Stop();
+    return density;
 }
 
 std::vector<WorldAssemblyFeatureBoundsV1> FloatingIslandFieldV1::solidSupportBounds() const
@@ -2036,19 +2497,46 @@ FieldInterval FloatingIslandFieldV1::interval(std::int64_t minX, std::int64_t mi
         || !floating_island_detail::ValidScalar(minX) || !floating_island_detail::ValidScalar(minY)
         || !floating_island_detail::ValidScalar(minZ) || !floating_island_detail::ValidScalar(maxX)
         || !floating_island_detail::ValidScalar(maxY) || !floating_island_detail::ValidScalar(maxZ)) return result;
-    const std::array<std::int64_t, 3> minimum{minX, minY, minZ};
-    const std::array<std::int64_t, 3> maximum{maxX, maxY, maxZ};
-    for (const auto& island : plan_->islands)
-        if (floating_island_detail::Intersects(minimum, maximum,
-                island.influenceMinimumSubvoxels, island.influenceMaximumSubvoxels)) return result;
-    for (const auto& edge : plan_->clusterEdges)
-        if (floating_island_detail::Intersects(minimum, maximum,
-                edge.influenceMinimumSubvoxels, edge.influenceMaximumSubvoxels)) return result;
-    // Root is void. A box outside every lobe/taper/blend/connector influence bound proves air.
-    // La racine est le vide : une boite hors des influences bornees prouve l'air.
-    result.known = true;
-    result.minimumDensitySubvoxels = 0;
-    result.maximumDensitySubvoxels = floating_island_detail::MaxDensity;
+    using namespace floating_island_detail;
+    if (plan_->islands.empty())
+        return {true,MaxDensity,MaxDensity};
+
+    const std::array<double,3> minimum{static_cast<double>(minX),
+        static_cast<double>(minY),static_cast<double>(minZ)};
+    const std::array<double,3> maximum{static_cast<double>(maxX),
+        static_cast<double>(maxY),static_cast<double>(maxZ)};
+    double fieldMinimum=static_cast<double>(MaxDensity);
+    double fieldMaximum=static_cast<double>(MaxDensity);
+    for(const auto& island:plan_->islands)
+    {
+        FDensityRange group=IslandDensityRange(*recipe_,island,minimum,maximum);
+        for(const auto& edge:plan_->clusterEdges)
+        {
+            if(edge.fromIslandId!=island.stableId)continue;
+            const FDensityRange connector=ConnectorDensityRange(*recipe_,edge,minimum,maximum);
+            const double detail=recipe_->geometryVersion>=2
+                ?static_cast<double>(recipe_->roughnessSubvoxels):0.0;
+            group.minimum=std::min(group.minimum,connector.minimum-detail)
+                -static_cast<double>(recipe_->blendRadiusSubvoxels)*0.25;
+            group.maximum=std::min(group.maximum,connector.maximum+detail);
+        }
+        fieldMinimum=std::min(fieldMinimum,group.minimum);
+        fieldMaximum=std::min(fieldMaximum,group.maximum);
+    }
+    if(!std::isfinite(fieldMinimum)||!std::isfinite(fieldMaximum))return result;
+
+    // These interval operations are shared by native and future generator classifiers: SDF
+    // intersections take max, unions take min, and smooth unions subtract at most k/4.
+    // Keep two subvoxels of slack for floating bounds followed by the field's integer rounding.
+    // Ces bornes servent les generateurs actuels et futurs : intersections=max, unions=min.
+    const double minimumRounded=std::clamp(std::floor(fieldMinimum)-2.0,
+        -static_cast<double>(MaxDensity),static_cast<double>(MaxDensity));
+    const double maximumRounded=std::clamp(std::ceil(fieldMaximum)+2.0,
+        -static_cast<double>(MaxDensity),static_cast<double>(MaxDensity));
+    if(minimumRounded>maximumRounded)return result;
+    result.known=true;
+    result.minimumDensitySubvoxels=static_cast<std::int64_t>(minimumRounded);
+    result.maximumDensitySubvoxels=static_cast<std::int64_t>(maximumRounded);
     return result;
 }
 

Standalone/Core/src/VoxelForgeCore.cpp

@@ -12,10 +12,12 @@
 #include <unordered_map>
 #include <unordered_set>
 #include <set>
+#include <map>
 #include <functional>
 #include <thread>
 #include <new>
 #include <stdexcept>
+#include <sstream>
 
 namespace vfcore::detail
 {
@@ -40,6 +42,34 @@ namespace VoxelForgeCore
 
     namespace
     {
+#if defined(VF_L30_ENABLE_COST_COUNTERS)
+        void PrintL30CostCounters(const FStandaloneShapeWorld::FClassificationThreadStats& stats)
+        {
+            if(stats.BoundaryBandCalls==0&&stats.ColumnZOverlapCalls==0)return;
+            std::printf("[L30CostTile] boundary_band_calls=%llu transition_window_checks=%llu "
+                "transition_window_hits=%llu transition_evaluations=%llu passage_fade_calls=%llu "
+                "passage_fade_mouth_tests=%llu column_z_overlap_calls=%llu column_guard_calls=%llu "
+                "column_guard_nonpositive_skips=%llu column_guard_radial_rejects=%llu "
+                "boundary_tile_cull_rejects=%llu boundary_point_cull_rejects=%llu "
+                "transition_passage_tile_skips=%llu "
+                "column_sdf_calls=%llu\n",
+                static_cast<unsigned long long>(stats.BoundaryBandCalls),
+                static_cast<unsigned long long>(stats.TransitionWindowChecks),
+                static_cast<unsigned long long>(stats.TransitionWindowHits),
+                static_cast<unsigned long long>(stats.TransitionEvaluatorCalls),
+                static_cast<unsigned long long>(stats.TransitionPassageFadeCalls),
+                static_cast<unsigned long long>(stats.TransitionPassageMouthTests),
+                static_cast<unsigned long long>(stats.ColumnZOverlapCalls),
+                static_cast<unsigned long long>(stats.ColumnGuardCalls),
+                static_cast<unsigned long long>(stats.ColumnGuardNonpositiveSkips),
+                static_cast<unsigned long long>(stats.ColumnGuardRadialRejects),
+                static_cast<unsigned long long>(stats.BoundaryTileCullRejects),
+                static_cast<unsigned long long>(stats.BoundaryPointCullRejects),
+                static_cast<unsigned long long>(stats.TransitionPassageTileSkips),
+                static_cast<unsigned long long>(stats.ColumnSignedDistanceCalls));
+        }
+#endif
+
         FIntVector ToNative(Vec3i value) { return {value.x,value.y,value.z}; }
         FVector ToNative(Vec3d value) { return {value.x,value.y,value.z}; }
         Vec3d FromNative(const FVector& value) { return {value.X,value.Y,value.Z}; }
@@ -188,6 +218,19 @@ namespace VoxelForgeCore
             return hash;
         }
 
+        std::uint64_t HashMaterialSamples(std::span<const MeshVertex> vertices)
+        {
+            std::uint64_t hash=14695981039346656037ull;
+            AddWord(hash,vertices.size(),8);
+            for(const MeshVertex& vertex:vertices)
+            {
+                AddWord(hash,vertex.hostMaterialId,2);
+                for(const std::uint16_t id:vertex.resourceMaterialIds)AddWord(hash,id,2);
+                for(const std::uint16_t weight:vertex.resourceWeightsQ16)AddWord(hash,weight,2);
+            }
+            return hash;
+        }
+
         std::uint64_t HashBrushTransaction(const EditTransaction& transaction)
         {
             std::uint64_t hash=14695981039346656037ull;
@@ -961,6 +1004,15 @@ namespace VoxelForgeCore
     const ResolvedLayoutSnapshotV3* ResolvedWorldSnapshot::resolvedLayout() const noexcept
     { return data_?data_->resolvedLayout.get():nullptr; }
 
+    ResolvedWorldSnapshot ResolvedWorldSnapshot::withResolvedLayout(
+        const ResolvedLayoutSnapshotV3& layout) const
+    {
+        if(!data_)return {};
+        auto copy=std::make_shared<Data>(*data_);
+        copy->resolvedLayout=std::make_shared<ResolvedLayoutSnapshotV3>(layout);
+        return ResolvedWorldSnapshot(std::move(copy));
+    }
+
     ResolvedWorldSnapshot ResolvedWorldSnapshot::withoutResolvedLayoutPassages() const
     {
         if(!data_||!data_->resolvedLayout)return {};
@@ -1018,6 +1070,18 @@ namespace VoxelForgeCore
         }
     };
 
+    struct FScopedIslandColumnCacheInstrumentation
+    {
+        floating_island_detail::FIslandColumnCacheInstrumentation* Previous=nullptr;
+        explicit FScopedIslandColumnCacheInstrumentation(
+            floating_island_detail::FIslandColumnCacheInstrumentation* Current,bool Enabled)
+            :Previous(Enabled?floating_island_detail::SetIslandColumnCacheInstrumentation(Current):nullptr),
+             bEnabled(Enabled){}
+        ~FScopedIslandColumnCacheInstrumentation()
+        {if(bEnabled)floating_island_detail::SetIslandColumnCacheInstrumentation(Previous);}
+        bool bEnabled=false;
+    };
+
     World::World(ResolvedWorldSnapshot snapshot):impl_(std::make_unique<Impl>())
     {
         if(snapshot.data_)
@@ -1179,27 +1243,150 @@ namespace VoxelForgeCore
             const double tileMaximum[3]={static_cast<double>(maximum.X),
                 static_cast<double>(maximum.Y),static_cast<double>(maximum.Z)};
             for(const auto& passage:layout.passages)
-            for(std::size_t segment=1;segment<passage.controlPoints.size();++segment)
             {
-                const auto& a=passage.controlPoints[segment-1];
-                const auto& b=passage.controlPoints[segment];
-                const double radius=static_cast<double>(std::max(
-                    a.radiusSubvoxels,b.radiusSubvoxels))/Q;
-                const double horizontalExtent=std::max(radius,bridgeHalfWidthVoxels);
-                const double low[3]={
-                    std::min(a.positionSubvoxels[0],b.positionSubvoxels[0])/Q-horizontalExtent,
-                    std::min(a.positionSubvoxels[1],b.positionSubvoxels[1])/Q-horizontalExtent,
-                    std::min(a.positionSubvoxels[2],b.positionSubvoxels[2])/Q-radius
-                        -bridgeFootDepthVoxels};
-                const double high[3]={
-                    std::max(a.positionSubvoxels[0],b.positionSubvoxels[0])/Q+horizontalExtent,
-                    std::max(a.positionSubvoxels[1],b.positionSubvoxels[1])/Q+horizontalExtent,
-                    std::max(a.positionSubvoxels[2],b.positionSubvoxels[2])/Q+radius};
+                for(std::size_t segment=1;segment<passage.controlPoints.size();++segment)
+                {
+                    const auto& a=passage.controlPoints[segment-1];
+                    const auto& b=passage.controlPoints[segment];
+                    const double radius=static_cast<double>(std::max(
+                        a.radiusSubvoxels,b.radiusSubvoxels))/Q;
+                    const double horizontalExtent=std::max(radius,bridgeHalfWidthVoxels);
+                    const double low[3]={
+                        std::min(a.positionSubvoxels[0],b.positionSubvoxels[0])/Q-horizontalExtent,
+                        std::min(a.positionSubvoxels[1],b.positionSubvoxels[1])/Q-horizontalExtent,
+                        std::min(a.positionSubvoxels[2],b.positionSubvoxels[2])/Q-radius
+                            -bridgeFootDepthVoxels};
+                    const double high[3]={
+                        std::max(a.positionSubvoxels[0],b.positionSubvoxels[0])/Q+horizontalExtent,
+                        std::max(a.positionSubvoxels[1],b.positionSubvoxels[1])/Q+horizontalExtent,
+                        std::max(a.positionSubvoxels[2],b.positionSubvoxels[2])/Q+radius};
+                    bool overlap=true;
+                    for(int axis=0;axis<3;++axis)
+                        overlap&=high[axis]>=tileMinimum[axis]&&low[axis]<=tileMaximum[axis];
+                    if(overlap)return true;
+                }
+
+            // L27 can add a long support column around an unsupported passage span. Its
+            // radius can exceed the route and bridge bounds above by the column wall and
+            // flare allowance. The precompile shape-free proof runs before that crossing
+            // plan exists, so conservatively bound every possible column from the resolved
+            // route itself. The center is either the passage anchor or an average of route
+            // samples; in the latter case it lies inside the route's XY bounds.
+            if(passage.controlPoints.size()>=2)
+            {
+                double routeMinimum[3]={std::numeric_limits<double>::infinity(),
+                    std::numeric_limits<double>::infinity(),
+                    std::numeric_limits<double>::infinity()};
+                double routeMaximum[3]={-std::numeric_limits<double>::infinity(),
+                    -std::numeric_limits<double>::infinity(),
+                    -std::numeric_limits<double>::infinity()};
+                double maximumBoreRadius=0.0;
+                for(const auto& point:passage.controlPoints)
+                {
+                    for(int axis=0;axis<3;++axis)
+                    {
+                        const double value=static_cast<double>(point.positionSubvoxels[axis])/Q;
+                        routeMinimum[axis]=std::min(routeMinimum[axis],value);
+                        routeMaximum[axis]=std::max(routeMaximum[axis],value);
+                    }
+                    maximumBoreRadius=std::max(maximumBoreRadius,
+                        static_cast<double>(point.radiusSubvoxels)/Q);
+                }
+
+                double centerMinimumX=routeMinimum[0],centerMaximumX=routeMaximum[0];
+                double centerMinimumY=routeMinimum[1],centerMaximumY=routeMaximum[1];
+                double maximumRouteOffset=std::hypot(
+                    routeMaximum[0]-routeMinimum[0],routeMaximum[1]-routeMinimum[1]);
+                const auto upper=std::find_if(layout.strates.begin(),layout.strates.end(),
+                    [&passage](const auto& stratum)
+                    {return stratum.strateIndex==passage.upperStrateIndex;});
+                if(upper!=layout.strates.end()
+                    &&upper->passageCapabilities.usePassageAnchorForColumns)
+                {
+                    const auto anchor=std::find_if(upper->anchors.begin(),upper->anchors.end(),
+                        [](const auto& value)
+                        {return value.kind=="passage_anchor"&&value.values.size()>=2;});
+                    if(anchor!=upper->anchors.end())
+                    {
+                        const double centerX=static_cast<double>(anchor->values[0])/Q;
+                        const double centerY=static_cast<double>(anchor->values[1])/Q;
+                        centerMinimumX=centerMaximumX=centerX;
+                        centerMinimumY=centerMaximumY=centerY;
+                        maximumRouteOffset=0.0;
+                        for(const auto& point:passage.controlPoints)
+                            maximumRouteOffset=std::max(maximumRouteOffset,std::hypot(
+                                static_cast<double>(point.positionSubvoxels[0])/Q-centerX,
+                                static_cast<double>(point.positionSubvoxels[1])/Q-centerY));
+                    }
+                }
+                // The generated maximum column radius is the route offset, bore radius,
+                // and 13.25 m of wall/irregularity/flare allowance.
+                const double columnRadius=maximumRouteOffset+maximumBoreRadius
+                    +13.25*voxelsPerMetre;
+                const double columnMinimum[3]={centerMinimumX-columnRadius,
+                    centerMinimumY-columnRadius,routeMinimum[2]-6.0*voxelsPerMetre};
+                const double columnMaximum[3]={centerMaximumX+columnRadius,
+                    centerMaximumY+columnRadius,routeMaximum[2]+5.0*voxelsPerMetre};
                 bool overlap=true;
                 for(int axis=0;axis<3;++axis)
-                    overlap&=high[axis]>=tileMinimum[axis]&&low[axis]<=tileMaximum[axis];
+                    overlap=overlap&&columnMaximum[axis]>=tileMinimum[axis]
+                        &&columnMinimum[axis]<=tileMaximum[axis];
                 if(overlap)return true;
             }
+            }
+            return false;
+        }
+
+        bool ResolvedStampTouchesBox(const ResolvedLayoutSnapshotV3& layout,
+            const FIntVector& minimum,const FIntVector& maximum,
+            std::uint32_t coreVoxelSizeMicrons)
+        {
+            if(layout.stamps.empty()||coreVoxelSizeMicrons==0)return false;
+            const double tileMinimum[3]={static_cast<double>(minimum.X),
+                static_cast<double>(minimum.Y),static_cast<double>(minimum.Z)};
+            const double tileMaximum[3]={static_cast<double>(maximum.X),
+                static_cast<double>(maximum.Y),static_cast<double>(maximum.Z)};
+            for(const auto& stamp:layout.stamps)
+            {
+                bool overlap=true;
+                for(std::size_t axis=0;axis<3;++axis)
+                {
+                    const double low=static_cast<double>(stamp.boundsMinimumMicrometres[axis])
+                        /coreVoxelSizeMicrons;
+                    const double high=static_cast<double>(stamp.boundsMaximumMicrometres[axis])
+                        /coreVoxelSizeMicrons;
+                    overlap=overlap&&high>=tileMinimum[axis]&&low<=tileMaximum[axis];
+                }
+                if(overlap)return true;
+            }
+            return false;
+        }
+
+        bool ResolvedCavernGraphTouchesBox(const ResolvedLayoutSnapshotV3& layout,
+            const FIntVector& minimum,const FIntVector& maximum,
+            std::uint32_t coreVoxelSizeMicrons)
+        {
+            if((layout.cavernRooms.empty()&&layout.cavernEdges.empty())
+                ||coreVoxelSizeMicrons==0)return false;
+            const double tileMinimum[3]={static_cast<double>(minimum.X),
+                static_cast<double>(minimum.Y),static_cast<double>(minimum.Z)};
+            const double tileMaximum[3]={static_cast<double>(maximum.X),
+                static_cast<double>(maximum.Y),static_cast<double>(maximum.Z)};
+            const auto overlaps=[&](const auto& feature)
+            {
+                bool overlap=true;
+                for(std::size_t axis=0;axis<3;++axis)
+                {
+                    const double low=static_cast<double>(feature.boundsMinimumMicrometres[axis])
+                        /coreVoxelSizeMicrons;
+                    const double high=static_cast<double>(feature.boundsMaximumMicrometres[axis])
+                        /coreVoxelSizeMicrons;
+                    overlap=overlap&&high>=tileMinimum[axis]&&low<=tileMaximum[axis];
+                }
+                return overlap;
+            };
+            for(const auto& room:layout.cavernRooms)if(overlaps(room))return true;
+            for(const auto& edge:layout.cavernEdges)if(overlaps(edge))return true;
             return false;
         }
     }
@@ -1220,7 +1407,8 @@ namespace VoxelForgeCore
             static_cast<int32>(std::clamp<std::uint32_t>(request.workerLimit,1,16)),ToNative(request.detail),
             request.includeFarWorld,error,&scheduler,request.roundTunnels,request.profileDetailBand,
             request.validatePassageRoutes,request.gpuVisualDetailTiles,
-            request.cpuVisualDetailTiles,impl_->worldAssembly.get(),impl_->resolvedLayout.get());
+            request.cpuVisualDetailTiles,impl_->worldAssembly.get(),impl_->resolvedLayout.get(),
+            request.parallelSignEdgeRepair);
         if(ok)
         {
             impl_->shape=std::move(shape);
@@ -1247,13 +1435,31 @@ namespace VoxelForgeCore
         const int32 firstSurfaceChunk=FloorDiv(boundsMin.Z,LayoutChunkWidth);
         const int32 lastSurfaceChunk=FloorDiv(boundsMax.Z,LayoutChunkWidth);
         const WorldAssemblyStratumPlanV1* selectedPlan=nullptr;
+        const ResolvedLayoutStratumV2* selectedGraphStratum=nullptr;
         for(int32 chunkZ=firstSurfaceChunk;chunkZ<=lastSurfaceChunk;++chunkZ)
         {
-            if(impl_->owner->Manager->GetGeneratorTypeForChunk(FIntVector(0,0,chunkZ))
-                !=ECaveGeneratorType::SurfaceWorld)return false;
             const int32 strateIndex=impl_->owner->Manager->GetStrateIndex(
                 static_cast<float>((static_cast<double>(chunkZ)+0.5)
                     *impl_->resolvedLayout->strateLayoutChunkSizeMicrometres/10000.0));
+            const auto resolved=std::find_if(impl_->resolvedLayout->strates.begin(),
+                impl_->resolvedLayout->strates.end(),[strateIndex](const auto& stratum)
+                    {return stratum.strateIndex==strateIndex;});
+            const bool nativeGraph=resolved!=impl_->resolvedLayout->strates.end()
+                &&HasNativeGraphField(*resolved)
+                &&(IsNativeCaveFieldStratum(*resolved)
+                    ?resolved->passageCapabilities.hasNativeCaveField
+                    :resolved->passageCapabilities.hasNativeLatticeField);
+            const auto managerType=impl_->owner->Manager->GetGeneratorTypeForChunk(
+                FIntVector(0,0,chunkZ));
+            if(!nativeGraph&&managerType!=ECaveGeneratorType::SurfaceWorld)return false;
+            if(nativeGraph)
+            {
+                if(selectedGraphStratum&&selectedGraphStratum!=&*resolved)return false;
+                selectedGraphStratum=&*resolved;
+                if(selectedPlan)return false;
+                continue;
+            }
+            if(selectedGraphStratum)return false;
             const auto found=std::find_if(impl_->worldAssembly->plan.strates.begin(),
                 impl_->worldAssembly->plan.strates.end(),[strateIndex,chunkZ](const auto& plan)
                 {return plan.strateIndex==strateIndex&&chunkZ<=plan.topChunkZ
@@ -1262,7 +1468,9 @@ namespace VoxelForgeCore
                 ||(selectedPlan&&selectedPlan!=&*found))return false;
             selectedPlan=&*found;
         }
-        if(!selectedPlan||!Heightfield2D(impl_->worldAssembly->recipe,*selectedPlan).isValid())
+        if((!selectedGraphStratum&&(!selectedPlan
+                ||!Heightfield2D(impl_->worldAssembly->recipe,*selectedPlan).isValid()))
+            ||(selectedGraphStratum&&selectedPlan))
             return false;
 
         const double coreVoxelsPerOwnerChunk=static_cast<double>(
@@ -1280,10 +1488,17 @@ namespace VoxelForgeCore
             tileMinimum[2]*scale};
         const std::int64_t subMaximum[3]={tileMaximum[0]*scale,tileMaximum[1]*scale,
             tileMaximum[2]*scale};
-        for(const WorldAssemblyFeatureV1& feature:selectedPlan->features)
-            if(IntersectsBox(feature.minimumSubvoxels,feature.maximumSubvoxels,
-                subMinimum,subMaximum))return false;
-        if(RouteTouchesBox(*selectedPlan,subMinimum,subMaximum))return false;
+        if(selectedPlan)
+        {
+            for(const WorldAssemblyFeatureV1& feature:selectedPlan->features)
+                if(IntersectsBox(feature.minimumSubvoxels,feature.maximumSubvoxels,
+                    subMinimum,subMaximum))return false;
+            if(RouteTouchesBox(*selectedPlan,subMinimum,subMaximum))return false;
+        }
+        if(ResolvedStampTouchesBox(*impl_->resolvedLayout,boundsMin,boundsMax,
+            impl_->owner->CoreVoxelSizeMicrons))return false;
+        if(ResolvedCavernGraphTouchesBox(*impl_->resolvedLayout,boundsMin,boundsMax,
+            impl_->owner->CoreVoxelSizeMicrons))return false;
         if(ResolvedPassageTouchesBox(*impl_->resolvedLayout,boundsMin,boundsMax,
             impl_->owner->CoreVoxelSizeMicrons))return false;
         if(OwnerPassageTouchesBox(*impl_->owner,boundsMin,boundsMax))return false;
@@ -1542,6 +1757,62 @@ namespace VoxelForgeCore
 
     float World::densityAt(Vec3d position) const
     { return impl_&&impl_->shapeReady.load(std::memory_order_acquire)&&impl_->shape?impl_->shape->DensityAt(static_cast<float>(position.x),static_cast<float>(position.y),static_cast<float>(position.z)):0.0f; }
+    MaterialSampleV1 World::materialAt(Vec3d position) const
+    {
+        if(!impl_||!impl_->shapeReady.load(std::memory_order_acquire)||!impl_->shape)
+            return {};
+        return impl_->shape->MaterialAt(static_cast<float>(position.x),
+            static_cast<float>(position.y),static_cast<float>(position.z));
+    }
+    OreMiningYieldV1 World::measureOreMiningYieldForSphere(Vec3d centerVoxel,
+        double radiusMetres,double sampleSpacingMetres) const
+    {
+        OreMiningYieldV1 result;result.sampleSpacingMetres=sampleSpacingMetres;
+        if(!impl_||!impl_->shapeReady.load(std::memory_order_acquire)||!impl_->shape
+            ||!std::isfinite(radiusMetres)||!std::isfinite(sampleSpacingMetres)
+            ||radiusMetres<=0.0||sampleSpacingMetres<0.05||sampleSpacingMetres>2.0)
+            return result;
+        const std::uint32_t voxelMicrometres=impl_->configuration.voxelSizeMicrons;
+        if(voxelMicrometres==0)return result;
+        const double voxelMetres=static_cast<double>(voxelMicrometres)/1000000.0;
+        const double radiusVoxels=radiusMetres/voxelMetres;
+        const double spacingVoxels=sampleSpacingMetres/voxelMetres;
+        const int steps=static_cast<int>(std::ceil(radiusMetres/sampleSpacingMetres));
+        const double radiusSquared=radiusMetres*radiusMetres;
+        std::map<std::uint16_t,std::uint64_t> weightedSamples;
+        for(int z=-steps;z<=steps;++z)
+            for(int y=-steps;y<=steps;++y)
+                for(int x=-steps;x<=steps;++x)
+                {
+                    const double dx=x*sampleSpacingMetres;
+                    const double dy=y*sampleSpacingMetres;
+                    const double dz=z*sampleSpacingMetres;
+                    const double distanceSquared=dx*dx+dy*dy+dz*dz;
+                    if(distanceSquared>radiusSquared)continue;
+                    const Vec3d point={centerVoxel.x+x*spacingVoxels,
+                        centerVoxel.y+y*spacingVoxels,centerVoxel.z+z*spacingVoxels};
+                    const float before=impl_->shape->DensityAt(static_cast<float>(point.x),
+                        static_cast<float>(point.y),static_cast<float>(point.z));
+                    const double carveDensity=radiusVoxels
+                        -std::sqrt(distanceSquared)/voxelMetres;
+                    const double after=std::max(static_cast<double>(before),carveDensity);
+                    if(!(before<0.0f&&after>=0.0))continue;
+                    ++result.solidSamplesRemoved;
+                    const MaterialSampleV1 material=materialAt(point);
+                    for(std::size_t slot=0;slot<2;++slot)
+                        if(material.resourceMaterialIds[slot]
+                            &&material.resourceWeightsQ16[slot])
+                            weightedSamples[material.resourceMaterialIds[slot]]
+                                +=material.resourceWeightsQ16[slot];
+                }
+        const double sampleVolume=sampleSpacingMetres*sampleSpacingMetres
+            *sampleSpacingMetres;
+        result.resources.reserve(weightedSamples.size());
+        for(const auto& [id,weighted]:weightedSamples)
+            result.resources.push_back({id,weighted,
+                static_cast<double>(weighted)/65535.0*sampleVolume});
+        return result;
+    }
     std::vector<PassageVoidCrossingAuditV1> World::passageVoidCrossings() const
     {
         std::vector<PassageVoidCrossingAuditV1> result;
@@ -1742,6 +2013,10 @@ namespace VoxelForgeCore
         FScopedSharedColumnCaches sharedColumnCaches(options.useSharedColumnCache
                 ?impl_->sharedHeightfieldColumns.get():nullptr,
             options.useSharedColumnCache?impl_->sharedIslandColumns.get():nullptr);
+        floating_island_detail::FIslandColumnCacheInstrumentation islandCacheInstrumentation;
+        islandCacheInstrumentation.tileStartCycles=VoxelForgeCoreShared::ReadCpuCycles();
+        FScopedIslandColumnCacheInstrumentation islandCacheScope(
+            &islandCacheInstrumentation,options.instrumentTileDrain);
         const auto& world=*impl_->owner;
         FStandaloneShapeWorld nativeOnlyShape;
         FIntVector nativeOnlyMinimum,nativeOnlyMaximum;
@@ -1771,6 +2046,10 @@ namespace VoxelForgeCore
         mesher.bStandaloneSkipUV=options.skipUv;mesher.bStandaloneSkipColors=options.skipColors;
         mesher.bStandaloneSkipMaterialGroups=options.skipMaterialGroups;
         mesher.bStandaloneEnableGradientMemoization=options.memoizeMcGradients;
+        mesher.bStandaloneEnableExactMidpointDensityMemo=options.exactMidpointDensityMemo;
+        mesher.bStandaloneEnableActiveLaneBatching=options.activeLaneBatching;
+        mesher.bStandaloneProofBlockCells=static_cast<int32>(std::clamp<std::uint32_t>(
+            options.proofBlockCells,1u,static_cast<std::uint32_t>(std::max(1,CHUNK_SIZE))));
         mesher.bGenerateSkirts=world.bGenerateSkirts;
         mesher.SkirtCells=static_cast<float>(world.SkirtCells)
             *static_cast<float>(world.OwnerVoxelSizeMicrons)
@@ -1881,6 +2160,121 @@ namespace VoxelForgeCore
         int64 sampleCount=0;std::vector<float> densityValues;
         FVoxelMarchingCubesStageTimings McStageTimings;
         TileMesh out;out.key=key;
+        const auto CopyIslandCacheMetrics=[&]()
+        {
+            if(options.instrumentTileDrain)
+            {
+                const auto& QueryCounts=FStandaloneShapeWorld::GetThreadClassificationStats();
+                out.diagnostics.densityPointCalls=QueryCounts.DensityPointCalls;
+                out.diagnostics.densityFloatPointCalls=QueryCounts.DensityFloatPointCalls;
+                out.diagnostics.densityLatticePointCalls=QueryCounts.DensityLatticePointCalls;
+                out.diagnostics.densityUnclampedPointCalls=QueryCounts.DensityUnclampedPointCalls;
+                out.diagnostics.densityX8PointCalls=QueryCounts.DensityX8PointCalls;
+                out.diagnostics.densityFieldEvalNanoseconds=QueryCounts.DensityFieldEvalNanoseconds;
+                out.diagnostics.densityFieldEvalSamplePoints=QueryCounts.DensityFieldEvalSamplePoints;
+                out.diagnostics.legacyFieldEvalCalls=QueryCounts.LegacyFieldEvalCalls;
+                out.diagnostics.legacyFieldTermCalls=QueryCounts.LegacyFieldTermCalls;
+                out.diagnostics.legacyFieldTermNanoseconds=QueryCounts.LegacyFieldTermNanoseconds;
+                out.diagnostics.legacyFieldTermTimedCalls=QueryCounts.LegacyFieldTermTimedCalls;
+                out.diagnostics.legacyPrimitiveCandidateVisits=
+                    QueryCounts.LegacyPrimitiveCandidateVisits;
+                out.diagnostics.legacyPrimitiveDistanceEvaluations=
+                    QueryCounts.LegacyPrimitiveDistanceEvaluations;
+                out.diagnostics.legacySmoothMinCalls=QueryCounts.LegacySmoothMinCalls;
+                out.diagnostics.legacySmoothMinNanoseconds=QueryCounts.LegacySmoothMinNanoseconds;
+                out.diagnostics.legacySmoothMinTimedCalls=QueryCounts.LegacySmoothMinTimedCalls;
+            }
+            if(!options.instrumentTileDrain)return;
+            islandCacheInstrumentation.tileCycles=VoxelForgeCoreShared::ReadCpuCycles()
+                -islandCacheInstrumentation.tileStartCycles;
+            out.diagnostics.islandLocalCacheHits=islandCacheInstrumentation.localHits;
+            out.diagnostics.islandLocalCacheMisses=islandCacheInstrumentation.localMisses;
+            out.diagnostics.islandLocalCacheConflictReplacements=
+                islandCacheInstrumentation.localConflictReplacements;
+            out.diagnostics.islandSharedCacheHits=islandCacheInstrumentation.shared.hits;
+            out.diagnostics.islandSharedCacheMisses=islandCacheInstrumentation.shared.misses;
+            out.diagnostics.islandSharedCacheComputes=islandCacheInstrumentation.shared.computes;
+            out.diagnostics.islandSharedCacheConflictReplacements=
+                islandCacheInstrumentation.shared.conflictReplacements;
+            out.diagnostics.islandSharedCacheLockWaitNanoseconds=
+                islandCacheInstrumentation.shared.lockWaitNanoseconds;
+            const auto& a=islandCacheInstrumentation.attribution;
+            const auto Estimate=[](std::uint64_t cycles,std::uint64_t calls,
+                std::uint64_t samples)->std::uint64_t
+            {
+                return samples?static_cast<std::uint64_t>(
+                    static_cast<long double>(cycles)*calls/samples):0;
+            };
+            constexpr std::array<const char*,5> CallerNames={
+                "grid","skirt","boundary","filter","other"};
+            constexpr std::array<const char*,10> BucketNames={
+                "field","island","roots","connectors","helix","column",
+                "local_probe","shared_cache","mouth_filter","boundary"};
+            std::uint64_t sampledNativeCalls=0;
+            for(const auto samples:a.sampledNativeCalls)sampledNativeCalls+=samples;
+            std::ostringstream line;
+            line<<"[FiFieldAttribution] key=("<<key.coordinate.x<<","<<key.coordinate.y<<","<<key.coordinate.z
+                <<",lod"<<key.lod<<") tile_cycles="<<islandCacheInstrumentation.tileCycles
+                <<" sample_period=256 native_calls_est="<<sampledNativeCalls*256
+                <<" native_samples="<<sampledNativeCalls;
+            for(std::size_t i=0;i<a.sampledNativeCalls.size();++i)
+            {
+                line<<" native_"<<CallerNames[i]<<"="<<a.sampledNativeCalls[i]*256<<"/"
+                    <<a.sampledNativeCalls[i]<<"/"
+                    <<Estimate(a.nativeCycles[i],a.sampledNativeCalls[i]*256,
+                        a.sampledNativeCalls[i])
+                    <<" native_"<<CallerNames[i]<<"_ns_est="
+                    <<Estimate(a.nativeNanoseconds[i],a.sampledNativeCalls[i]*256,
+                        a.sampledNativeCalls[i]);
+                line<<" field_"<<CallerNames[i]<<"="<<a.sampledFieldCalls[i]*256<<"/"
+                    <<a.sampledFieldCalls[i]<<"/"
+                    <<Estimate(a.fieldCycles[i],a.sampledFieldCalls[i]*256,
+                        a.sampledFieldCalls[i])
+                    <<" field_"<<CallerNames[i]<<"_ns_est="
+                    <<Estimate(a.fieldNanoseconds[i],a.sampledFieldCalls[i]*256,
+                        a.sampledFieldCalls[i]);
+            }
+            for(std::size_t i=0;i<BucketNames.size();++i)
+                line<<" comp_"<<BucketNames[i]<<"="
+                    <<Estimate(a.exclusiveCycles[i],a.scopeSamples[i]*256,
+                        a.scopeSamples[i])
+                    <<" comp_"<<BucketNames[i]<<"_ns_est="
+                    <<Estimate(a.exclusiveNanoseconds[i],a.scopeSamples[i]*256,
+                        a.scopeSamples[i])
+                    <<"/"<<a.scopeSamples[i]<<"/"<<a.scopeSamples[i]*256;
+            const auto& shared=islandCacheInstrumentation.shared;
+            line<<" local_probe_calls="<<(islandCacheInstrumentation.localHits
+                    +islandCacheInstrumentation.localMisses)
+                <<" shared_calls_est="<<shared.sampledInitialReads*128
+                <<" shared_initial_read="<<shared.sampledInitialReads<<"/"
+                <<Estimate(shared.sampledInitialReadCycles,shared.sampledInitialReads*128,
+                    shared.sampledInitialReads)
+                <<" shared_locked_read="<<shared.sampledLockedReads<<"/"
+                <<Estimate(shared.sampledLockedReadCycles,shared.sampledLockedReads*128,
+                    shared.sampledLockedReads)
+                <<" shared_lock="<<shared.sampledLocks<<"/"
+                <<Estimate(shared.sampledLockCycles,shared.sampledLocks*128,
+                    shared.sampledLocks)
+                <<" shared_build="<<shared.sampledBuilds<<"/"
+                <<Estimate(shared.sampledBuildCycles,shared.sampledBuilds*128,
+                    shared.sampledBuilds)
+                <<" trace_sampled="<<a.traceSampledMisses
+                <<" trace_seen_before="<<a.traceSeenBefore
+                <<" trace_evictions="<<a.traceEvictions
+                <<" trace_reused_evictions="<<a.traceReusedEvictions
+                <<" trace_events="<<a.traceCount;
+            std::printf("%s\n",line.str().c_str());
+            for(std::size_t i=0;i<a.traceCount;++i)
+                std::printf("[FiReuseTrace] tile=(%d,%d,%d,lod%d) set=%llu island=%llu xy=(%lld,%lld) evicted_island=%llu evicted_xy=(%lld,%lld) flags=%u\n",
+                    key.coordinate.x,key.coordinate.y,key.coordinate.z,key.lod,
+                    static_cast<unsigned long long>(a.traceSet[i]),
+                    static_cast<unsigned long long>(a.traceIsland[i]),
+                    static_cast<long long>(a.traceX[i]),static_cast<long long>(a.traceY[i]),
+                    static_cast<unsigned long long>(a.traceEvictedIsland[i]),
+                    static_cast<long long>(a.traceEvictedX[i]),
+                    static_cast<long long>(a.traceEvictedY[i]),
+                    static_cast<unsigned>(a.traceFlags[i]));
+        };
         out.diagnostics.featureRefinedResolution=bFeatureRefinedResolution;
         if(options.profileMesherStages)
         {
@@ -1917,20 +2311,50 @@ namespace VoxelForgeCore
                 bHasNativeSurfaceHorizonPlan=bHasNativeSurfaceHorizonPlan
                     ||(TileMinimumZ<=PlanMaximumZ&&TileMaximumZ>=PlanMinimumZ);
             }
+            constexpr int64 IslandQueryPad=2*WorldAssemblySubvoxelsPerVoxel;
+            const std::array<int64,3> TileMinimum={
+                (static_cast<int64>(origin.X)*WorldAssemblySubvoxelsPerVoxel)-IslandQueryPad,
+                (static_cast<int64>(origin.Y)*WorldAssemblySubvoxelsPerVoxel)-IslandQueryPad,
+                (static_cast<int64>(origin.Z)*WorldAssemblySubvoxelsPerVoxel)-IslandQueryPad};
+            const std::array<int64,3> TileMaximum={
+                ((static_cast<int64>(origin.X)+extent)*WorldAssemblySubvoxelsPerVoxel)+IslandQueryPad,
+                ((static_cast<int64>(origin.Y)+extent)*WorldAssemblySubvoxelsPerVoxel)+IslandQueryPad,
+                ((static_cast<int64>(origin.Z)+extent)*WorldAssemblySubvoxelsPerVoxel)+IslandQueryPad};
             for(const auto& Entry:impl_->worldAssembly->floatingIslands)
             {
                 const int64 PlanMinimumZ=static_cast<int64>(std::min(Entry.bottomChunkZ,Entry.topChunkZ))
                     *impl_->resolvedLayout->strateLayoutChunkWidthSubvoxels/WorldAssemblySubvoxelsPerVoxel;
                 const int64 PlanMaximumZ=(static_cast<int64>(std::max(Entry.bottomChunkZ,Entry.topChunkZ)+1))
                     *impl_->resolvedLayout->strateLayoutChunkWidthSubvoxels/WorldAssemblySubvoxelsPerVoxel;
+                if(TileMinimumZ>PlanMaximumZ||TileMaximumZ<PlanMinimumZ)continue;
+
+                const auto IntersectsTile=[&](const auto& Feature)
+                {
+                    for(std::size_t Axis=0;Axis<3;++Axis)
+                        if(Feature.influenceMinimumSubvoxels[Axis]>TileMaximum[Axis]
+                            ||Feature.influenceMaximumSubvoxels[Axis]<TileMinimum[Axis])return false;
+                    return true;
+                };
+                bool bIslandFeatureOverlap=std::any_of(Entry.manifest.plan.islands.begin(),
+                    Entry.manifest.plan.islands.end(),IntersectsTile)
+                    ||std::any_of(Entry.manifest.plan.clusterEdges.begin(),
+                        Entry.manifest.plan.clusterEdges.end(),IntersectsTile);
+                const auto& Recipe=Entry.manifest.recipe;
+                const int64 Bottom=Recipe.layoutMinimumZSubvoxels;
+                const int64 Top=Recipe.layoutMaximumZSubvoxels;
+                const int64 Seal=Recipe.boundarySealSubvoxels;
+                const bool bBoundarySealOverlap=(TileMinimum[2]<=Top&&TileMaximum[2]>=Top-Seal)
+                    ||(Recipe.geometryVersion<3&&TileMinimum[2]<Bottom+Seal
+                        &&TileMaximum[2]>=Bottom);
                 bHasIslandPlanInTile=bHasIslandPlanInTile
-                    ||(TileMinimumZ<=PlanMaximumZ&&TileMaximumZ>=PlanMinimumZ);
+                    ||bIslandFeatureOverlap||bBoundarySealOverlap;
             }
         }
         const bool bUseNativeSurfaceHorizon=key.lod>=5&&!bOverlapsPlayerEdit
             &&bHasNativeSurfaceHorizonPlan&&!bHasIslandPlanInTile;
         const bool bSkipFarShellRepair=key.lod>=7&&bUseNativeSurfaceHorizon;
         FStandaloneShapeWorld::ResetThreadClassificationStats();
+        FStandaloneShapeWorld::SetThreadDensityQueryProfileEnabled(options.instrumentTileDrain);
         VoxelForgeCore::Heightfield2D::resetThreadColumnCacheStats(
             options.captureColumnCoordinates);
         if(options.captureColumnCoordinates)
@@ -1943,6 +2367,7 @@ namespace VoxelForgeCore
                 static_cast<std::int64_t>(origin.Y+extent)*SubvoxelsPerVoxel);
         }
         bool bNativeSurfaceTile=false;
+        bool bTileProofSkipSafe=false;
         bool bNativeSurfaceBandSafe=false;
         double classificationColumnComputeMilliseconds=0.0;
         if(bHasWorldAssembly)
@@ -1950,10 +2375,15 @@ namespace VoxelForgeCore
             const double columnMillisecondsBeforeClassification=
                 VoxelForgeCore::Heightfield2D::threadColumnCacheStats().columnComputeMilliseconds;
             const auto Classification=tileShape.ClassifyBoxDetailed(origin,step,cells);
+            out.diagnostics.tileProofVetoReason=Classification.LegacyProofVeto;
+            out.diagnostics.tileProofSafe=Classification.bSkipSafe;
+            out.diagnostics.tileLegacyBlockProofRelevant=
+                Classification.bLegacyBlockProofRelevant;
             classificationColumnComputeMilliseconds=std::max(0.0,
                 VoxelForgeCore::Heightfield2D::threadColumnCacheStats().columnComputeMilliseconds
                     -columnMillisecondsBeforeClassification);
             bNativeSurfaceTile=Classification.bNativeSurface;
+            bTileProofSkipSafe=Classification.bSkipSafe;
             if(options.profileMesherStages)
                 out.diagnostics.nativeSurfaceTile=bNativeSurfaceTile;
             // NativeSurfaceDensityAt consumes only the bounded manifest heightfield and its
@@ -1961,7 +2391,7 @@ namespace VoxelForgeCore
             // unknown; edits and cross-strate tiles are still excluded below.
             // NativeSurfaceDensityAt ne consomme que le champ et les volumes bornes du manifeste.
             bNativeSurfaceBandSafe=bNativeSurfaceTile;
-            if(bNativeSurfaceTile)
+            if(bNativeSurfaceTile||bTileProofSkipSafe)
             {
                 out.diagnostics.tileWasClassified=true;
                 switch(Classification.bUnknown?EVoxelTileClass::Mixed:Classification.Verdict)
@@ -1970,12 +2400,30 @@ namespace VoxelForgeCore
                     case EVoxelTileClass::AllAir:out.diagnostics.tileClass=TileClass::allAir;break;
                     case EVoxelTileClass::Mixed:out.diagnostics.tileClass=TileClass::mixed;break;
                 }
-                if((out.diagnostics.tileClass==TileClass::allSolid
+                if(bTileProofSkipSafe&&(out.diagnostics.tileClass==TileClass::allSolid
                     ||out.diagnostics.tileClass==TileClass::allAir)
-                    &&!options.hashDensity&&!options.captureDensitySamples&&!bNeedsFarShell
+                    &&(!options.hashDensity||options.allowUniformSkipsWhenHashing)
+                    &&!options.captureDensitySamples&&!bNeedsFarShell
                     &&!options.auditUniformBlockProofs)
                 {
                     out.diagnostics.meshingSkipped=true;
+                    if(options.hashDensity)
+                    {
+                        const FVoxelMeshData EmptyMesh;
+                        out.densityHash=14695981039346656037ull;
+                        out.meshHash=HashViewerMesh(EmptyMesh);
+                        out.payloadHash=HashPayload(EmptyMesh);
+                        out.topologyHash=HashTopology(EmptyMesh);
+                        out.materialHash=HashMaterialSamples(out.vertices);
+                        if(key.lod>=4)
+                        {
+                            out.meshHash=SaltFarHorizonHash(out.meshHash,options.farHorizonVersion);
+                            out.payloadHash=SaltFarHorizonHash(out.payloadHash,options.farHorizonVersion);
+                            out.topologyHash=SaltFarHorizonHash(out.topologyHash,options.farHorizonVersion);
+                        }
+                        out.hasDensityHash=out.hasMeshHash=out.hasPayloadHash=out.hasTopologyHash=true;
+                        out.hasMaterialHash=true;
+                    }
                     const auto Counts=FStandaloneShapeWorld::GetThreadClassificationStats();
                     const auto& Columns=VoxelForgeCore::Heightfield2D::threadColumnCacheStats();
                     out.diagnostics.solidBoxes=Counts.SolidBoxes;
@@ -1995,6 +2443,9 @@ namespace VoxelForgeCore
                     out.diagnostics.classificationExclusiveMilliseconds=std::max(0.0,
                         Counts.Milliseconds-classificationColumnComputeMilliseconds);
                     out.diagnostics.columnComputeMilliseconds=Columns.columnComputeMilliseconds;
+#if defined(VF_L30_ENABLE_COST_COUNTERS)
+                    PrintL30CostCounters(Counts);
+#endif
                     if(options.captureColumnCoordinates)
                     {
                         out.diagnostics.columnEvaluationWorkerHash=static_cast<std::uint64_t>(
@@ -2002,13 +2453,16 @@ namespace VoxelForgeCore
                         out.diagnostics.columnCoordinateCaptureComplete=Columns.coordinateCaptureComplete;
                         out.diagnostics.evaluatedColumnCoordinates=Columns.evaluatedCoordinates;
                     }
+                    CopyIslandCacheMetrics();
                     out.densitySampleCount=0;
                     return out;
                 }
-                // Native SurfaceWorld classifies each 8-cell block against its exact sample
-                // lattice. This lets the mesher avoid filling density grids for proven air/rock.
-                mesher.bUseBlockEarlyOut=true;
             }
+            // Preserve the committed native-field block path. Legacy block certificates
+            // remain audit-only until their cost is repaid against the full-grid path.
+            if(bHasWorldAssembly&&step<=2
+                &&(bNativeSurfaceTile||options.auditUniformBlockProofs))
+                mesher.bUseBlockEarlyOut=true;
         }
         const auto MeshingStart=std::chrono::steady_clock::now();
         int32 MeshBandMinZVoxel=options.bandMinZVoxel;
@@ -2094,6 +2548,88 @@ namespace VoxelForgeCore
                         RelevantMinimum=std::min(RelevantMinimum,FeatureMinimum);
                         RelevantMaximum=std::max(RelevantMaximum,FeatureMaximum);
                     }
+                    // A resolved passage void column can add solid support above or
+                    // below the native heightfield's local Z range. Its finite radial
+                    // and vertical bounds must participate before the mesh band is clipped.
+                    for(const auto& Crossing:tileShape.GetPassageVoidCrossings())
+                    {
+                        if(!Crossing.needsColumn||Crossing.maximumRadiusSubvoxels<=0
+                            ||Crossing.topZSubvoxels<=Crossing.bottomZSubvoxels)continue;
+                        const double Radius=static_cast<double>(Crossing.maximumRadiusSubvoxels)
+                            /static_cast<double>(SubvoxelScale);
+                        const double CenterX=static_cast<double>(Crossing.centerXSubvoxels)
+                            /static_cast<double>(SubvoxelScale);
+                        const double CenterY=static_cast<double>(Crossing.centerYSubvoxels)
+                            /static_cast<double>(SubvoxelScale);
+                        if(CenterX+Radius<TileMinimum[0]/static_cast<double>(SubvoxelScale)
+                            ||CenterX-Radius>TileMaximum[0]/static_cast<double>(SubvoxelScale)
+                            ||CenterY+Radius<TileMinimum[1]/static_cast<double>(SubvoxelScale)
+                            ||CenterY-Radius>TileMaximum[1]/static_cast<double>(SubvoxelScale))continue;
+                        RelevantMinimum=std::min(RelevantMinimum,
+                            static_cast<double>(Crossing.bottomZSubvoxels)
+                                /static_cast<double>(SubvoxelScale));
+                        RelevantMaximum=std::max(RelevantMaximum,
+                            static_cast<double>(Crossing.topZSubvoxels)
+                                /static_cast<double>(SubvoxelScale));
+                    }
+                    // The native heightfield band only covers the owner terrain and its
+                    // manifest features. Resolved SDF stamps can carve below that band or
+                    // add a floor there, so include every overlapping stamp's bounded Z
+                    // support before clipping marching-cubes samples.
+                    if(impl_->resolvedLayout&&impl_->owner->CoreVoxelSizeMicrons>0)
+                    {
+                        const double MicronsToVoxels=1.0
+                            /static_cast<double>(impl_->owner->CoreVoxelSizeMicrons);
+                        const double TileMinimumX=static_cast<double>(origin.X-step);
+                        const double TileMinimumY=static_cast<double>(origin.Y-step);
+                        const double TileMaximumX=static_cast<double>(origin.X+extent+step);
+                        const double TileMaximumY=static_cast<double>(origin.Y+extent+step);
+                        for(const auto& Stamp:impl_->resolvedLayout->stamps)
+                        {
+                            if(Stamp.strateIndex!=PlanIt->strateIndex)continue;
+                            const double MinimumX=Stamp.boundsMinimumMicrometres[0]
+                                *MicronsToVoxels;
+                            const double MaximumX=Stamp.boundsMaximumMicrometres[0]
+                                *MicronsToVoxels;
+                            const double MinimumY=Stamp.boundsMinimumMicrometres[1]
+                                *MicronsToVoxels;
+                            const double MaximumY=Stamp.boundsMaximumMicrometres[1]
+                                *MicronsToVoxels;
+                            if(MaximumX<TileMinimumX||MinimumX>TileMaximumX
+                                ||MaximumY<TileMinimumY||MinimumY>TileMaximumY)continue;
+                            const double MinimumZ=Stamp.boundsMinimumMicrometres[2]
+                                *MicronsToVoxels;
+                            const double MaximumZ=Stamp.boundsMaximumMicrometres[2]
+                                *MicronsToVoxels;
+                            if(MaximumZ<TileMinimumZ||MinimumZ>TileMaximumZ)continue;
+                            RelevantMinimum=std::min(RelevantMinimum,MinimumZ);
+                            RelevantMaximum=std::max(RelevantMaximum,MaximumZ);
+                        }
+                        const auto includeCavernBounds=[&](const auto& Feature)
+                        {
+                            const double MinimumX=Feature.boundsMinimumMicrometres[0]
+                                *MicronsToVoxels;
+                            const double MaximumX=Feature.boundsMaximumMicrometres[0]
+                                *MicronsToVoxels;
+                            const double MinimumY=Feature.boundsMinimumMicrometres[1]
+                                *MicronsToVoxels;
+                            const double MaximumY=Feature.boundsMaximumMicrometres[1]
+                                *MicronsToVoxels;
+                            if(MaximumX<TileMinimumX||MinimumX>TileMaximumX
+                                ||MaximumY<TileMinimumY||MinimumY>TileMaximumY)return;
+                            const double MinimumZ=Feature.boundsMinimumMicrometres[2]
+                                *MicronsToVoxels;
+                            const double MaximumZ=Feature.boundsMaximumMicrometres[2]
+                                *MicronsToVoxels;
+                            if(MaximumZ<TileMinimumZ||MinimumZ>TileMaximumZ)return;
+                            RelevantMinimum=std::min(RelevantMinimum,MinimumZ);
+                            RelevantMaximum=std::max(RelevantMaximum,MaximumZ);
+                        };
+                        for(const auto& Room:impl_->resolvedLayout->cavernRooms)
+                            includeCavernBounds(Room);
+                        for(const auto& Edge:impl_->resolvedLayout->cavernEdges)
+                            includeCavernBounds(Edge);
+                    }
                     if(std::isfinite(RelevantMinimum)&&std::isfinite(RelevantMaximum))
                     {
                         const int32 NativeBandMinimum=FMath::FloorToInt(RelevantMinimum)-step;
@@ -2142,7 +2678,22 @@ namespace VoxelForgeCore
         // GenerateMesh n'échantillonne que origin..origin+extent et la marge de normale d'un pas ;
         // queryMinimum/queryMaximum ci-dessus couvrent exactement ce domaine inclusif.
         const FStandaloneShapeWorld::FScopedPassageTileQueries passageFeatureScope(
-            tileShape,queryMinimum,queryMaximum);
+            tileShape,queryMinimum,queryMaximum,
+            options.profilePassageComposer?&out.diagnostics:nullptr);
+        if(options.profilePassageComposer)
+        {
+            out.diagnostics.passageComposerProfiled=true;
+            out.diagnostics.passageTileFeatureCount=passageFeatureScope.featureCount();
+            if(impl_->resolvedLayout)
+            {
+                out.diagnostics.passageTileRouteSegmentCandidates=
+                    passageFeatureScope.routeSegmentCandidateCount();
+                for(std::size_t passageIndex=0;
+                    passageIndex<impl_->resolvedLayout->passages.size();++passageIndex)
+                    out.diagnostics.passageTileMouthSegmentCandidates+=
+                        passageFeatureScope.mouthSupportSegments(passageIndex).size();
+            }
+        }
         const bool bDiagnosticColumnSampling=options.diagnosticGlobalOctaveDrop!=0
             ||options.diagnosticColumnInterpolationStride>1;
         const std::uint32_t PreviousOctaveDrop=bDiagnosticColumnSampling
@@ -2211,9 +2762,29 @@ namespace VoxelForgeCore
             out.diagnostics.marchingCubesOtherMilliseconds=McStageTimings.OtherMilliseconds;
             out.diagnostics.marchingCubesGradientFallbackDensityCalls=
                 McStageTimings.GradientFallbackDensityCalls;
+            out.diagnostics.marchingCubesGradientCalls=McStageTimings.GradientCalls;
             out.diagnostics.marchingCubesEdgeMidpointDensityCalls=
                 McStageTimings.EdgeMidpointDensityCalls;
+            out.diagnostics.marchingCubesEdgeMidpointDensityMemoHits=
+                McStageTimings.EdgeMidpointDensityMemoHits;
             out.diagnostics.marchingCubesGradientMemoHits=McStageTimings.GradientMemoHits;
+            out.diagnostics.marchingCubesX8DensityCalls=McStageTimings.X8DensityCalls;
+            out.diagnostics.marchingCubesX8ActiveLanes=McStageTimings.X8ActiveLanes;
+            out.diagnostics.marchingCubesCandidateCells=McStageTimings.CandidateCells;
+            out.diagnostics.marchingCubesZBandRejectedCells=McStageTimings.ZBandRejectedCells;
+            out.diagnostics.marchingCubesCellClassificationCalls=
+                McStageTimings.CellClassificationCalls;
+            out.diagnostics.marchingCubesSurfaceCellCalls=McStageTimings.SurfaceCellCalls;
+            out.diagnostics.marchingCubesProofSkippedSolidCells=
+                McStageTimings.ProofSkippedSolidCells;
+            out.diagnostics.marchingCubesProofSkippedAirCells=
+                McStageTimings.ProofSkippedAirCells;
+            out.diagnostics.marchingCubesProofSkippedDensitySamples=
+                McStageTimings.ProofSkippedDensitySamples;
+            out.diagnostics.marchingCubesSkirtEdgeCandidates=McStageTimings.SkirtEdgeCandidates;
+            out.diagnostics.marchingCubesSkirtBoundaryCandidates=
+                McStageTimings.SkirtBoundaryCandidates;
+            out.diagnostics.marchingCubesSkirtDensityProbes=McStageTimings.SkirtDensityProbes;
         }
         const double MeshingMilliseconds=std::chrono::duration<double,std::milli>(
             std::chrono::steady_clock::now()-MeshingStart).count();
@@ -2356,6 +2927,9 @@ namespace VoxelForgeCore
         if(bHasWorldAssembly)
         {
             const auto Counts=FStandaloneShapeWorld::GetThreadClassificationStats();
+#if defined(VF_L30_ENABLE_COST_COUNTERS)
+            PrintL30CostCounters(Counts);
+#endif
             const auto& Columns=VoxelForgeCore::Heightfield2D::threadColumnCacheStats();
             out.diagnostics.fieldCalls=Columns.pointCalls;
             out.diagnostics.floatFieldCalls=Counts.NativeFloatFieldCalls;
@@ -2408,6 +2982,21 @@ namespace VoxelForgeCore
         out.skirtFaceMasks.assign(mesh.TriangleSkirtFaceMasks.begin(),
             mesh.TriangleSkirtFaceMasks.end());
         out.skirtFaceMasks.resize(mesh.Triangles.Num()/3,0);
+        constexpr std::int64_t MaterialSubvoxelsPerVoxel=WorldAssemblySubvoxelsPerVoxel;
+        const std::array<std::int64_t,3> materialTileMinimum={
+            (static_cast<std::int64_t>(origin.X)-step)*MaterialSubvoxelsPerVoxel,
+            (static_cast<std::int64_t>(origin.Y)-step)*MaterialSubvoxelsPerVoxel,
+            (static_cast<std::int64_t>(origin.Z)-step)*MaterialSubvoxelsPerVoxel};
+        const std::array<std::int64_t,3> materialTileMaximum={
+            (static_cast<std::int64_t>(origin.X)+extent+step)*MaterialSubvoxelsPerVoxel,
+            (static_cast<std::int64_t>(origin.Y)+extent+step)*MaterialSubvoxelsPerVoxel,
+            (static_cast<std::int64_t>(origin.Z)+extent+step)*MaterialSubvoxelsPerVoxel};
+        const auto materialCandidates=tileShape.OreVeinTileCandidates(
+            materialTileMinimum,materialTileMaximum);
+        out.diagnostics.materialTileOutsideEveryVein=materialCandidates.empty();
+        const double geometryVoxelSizeCm=static_cast<double>(world.CoreVoxelSizeMicrons)/10000.0;
+        std::uint64_t materialQueries=0,materialCandidateChecks=0;
+        const auto materialQueryStart=std::chrono::steady_clock::now();
         out.vertices.reserve(static_cast<std::size_t>(mesh.Vertices.Num()));
         for(int32 i=0;i<mesh.Vertices.Num();++i)
         {
@@ -2415,9 +3004,25 @@ namespace VoxelForgeCore
             const FVector normal=i<mesh.Normals.Num()?mesh.Normals[i]:FVector::ZeroVector;
             const FVector2f uv=i<mesh.UVs.Num()?mesh.UVs[i]:FVector2f(0.0f,0.0f);
             const FColor color=i<mesh.Colors.Num()?mesh.Colors[i]:FColor(0,0,0,0);
+            MaterialSampleV1 material;
+            if(!materialCandidates.empty())
+            {
+                ++materialQueries;
+                material=tileShape.EvaluateMaterialAt(
+                    static_cast<float>(p.X/geometryVoxelSizeCm),
+                    static_cast<float>(p.Y/geometryVoxelSizeCm),
+                    static_cast<float>(p.Z/geometryVoxelSizeCm),materialCandidates,
+                    &materialCandidateChecks);
+            }
             out.vertices.push_back({{p.X,p.Y,p.Z},{normal.X,normal.Y,normal.Z},{uv.X,uv.Y},
-                {color.R,color.G,color.B,color.A}});
+                {color.R,color.G,color.B,color.A},material.hostMaterialId,
+                material.resourceMaterialIds,material.resourceWeightsQ16});
         }
+        out.diagnostics.materialQueries=materialQueries;
+        out.diagnostics.materialCandidateChecks=materialCandidateChecks;
+        out.diagnostics.materialQueryMilliseconds=materialQueries
+            ?std::chrono::duration<double,std::milli>(
+                std::chrono::steady_clock::now()-materialQueryStart).count():0.0;
         out.indices.reserve(static_cast<std::size_t>(mesh.Triangles.Num()));
         for(const int32 index:mesh.Triangles)out.indices.push_back(static_cast<std::uint32_t>(index));
         if(options.captureDensitySamples)out.debugDensitySamples=std::move(densityValues);
@@ -2427,8 +3032,77 @@ namespace VoxelForgeCore
             const auto& values=options.captureDensitySamples?out.debugDensitySamples:densityValues;
             for(const float value:values)
             { densityHash^=std::bit_cast<std::uint32_t>(value);densityHash*=1099511628211ull; }
+
+            // A stream-hash run is the full-grid reference path. Record the exact sign
+            // uniformity ceiling from the same captured lattice that feeds Marching Cubes.
+            // Blocks are disjoint sample cubes; partial cubes at tile edges are included.
+            const std::size_t gridWidth=static_cast<std::size_t>(
+                std::clamp(MeshCells,2,CHUNK_SIZE)+3);
+            const std::size_t xySamples=gridWidth*gridWidth;
+            const std::size_t zSamples=xySamples>0&&values.size()%xySamples==0
+                ?values.size()/xySamples:0;
+            bool tileHasSign=false,tileUniform=true;
+            bool tileAir=false;
+            for(const float value:values)
+            {
+                if(!std::isfinite(value)||value==0.0f)
+                {tileUniform=false;continue;}
+                const bool air=value>0.0f;
+                if(!tileHasSign){tileHasSign=true;tileAir=air;}
+                else if(tileAir!=air)tileUniform=false;
+            }
+            const auto CountUniformBlocks=[&](std::size_t blockWidth)
+            {
+                std::uint64_t uniformBlocks=0,uniformSamples=0;
+                if(zSamples==0)return std::pair{uniformBlocks,uniformSamples};
+                for(std::size_t z0=0;z0<zSamples;z0+=blockWidth)
+                for(std::size_t y0=0;y0<gridWidth;y0+=blockWidth)
+                for(std::size_t x0=0;x0<gridWidth;x0+=blockWidth)
+                {
+                    const std::size_t z1=std::min(zSamples,z0+blockWidth);
+                    const std::size_t y1=std::min(gridWidth,y0+blockWidth);
+                    const std::size_t x1=std::min(gridWidth,x0+blockWidth);
+                    bool hasSign=false,uniform=true,air=false;
+                    for(std::size_t z=z0;z<z1&&uniform;++z)
+                    for(std::size_t y=y0;y<y1&&uniform;++y)
+                    for(std::size_t x=x0;x<x1;++x)
+                    {
+                        const float value=values[(z*gridWidth+y)*gridWidth+x];
+                        if(!std::isfinite(value)||value==0.0f)
+                        {uniform=false;break;}
+                        const bool sampleAir=value>0.0f;
+                        if(!hasSign){hasSign=true;air=sampleAir;}
+                        else if(air!=sampleAir){uniform=false;break;}
+                    }
+                    if(uniform&&hasSign)
+                    {
+                        ++uniformBlocks;
+                        uniformSamples+=static_cast<std::uint64_t>(z1-z0)
+                            *static_cast<std::uint64_t>(y1-y0)
+                            *static_cast<std::uint64_t>(x1-x0);
+                    }
+                }
+                return std::pair{uniformBlocks,uniformSamples};
+            };
+            const auto [uniformBlocks8,uniformSamples8]=CountUniformBlocks(8);
+            const auto [uniformBlocks4,uniformSamples4]=CountUniformBlocks(4);
+            const double centerZ=(static_cast<double>(origin.Z)
+                +static_cast<double>(extent)*0.5)*static_cast<double>(world.CoreVoxelSizeMicrons)
+                /10000.0;
+            const int32 stratum=world.Manager
+                ?world.Manager->GetStrateIndex(static_cast<float>(centerZ)):-1;
+            std::printf("[UniformGridCeiling] strate=%d lod=%d key=(%d,%d,%d) samples=%zu uniform=%d air=%d blocks8=%llu samples8=%llu blocks4=%llu samples4=%llu proof_safe=%d proof_veto=%u\n",
+                stratum,key.lod,key.coordinate.x,key.coordinate.y,key.coordinate.z,values.size(),
+                tileUniform&&tileHasSign?1:0,tileUniform&&tileHasSign&&tileAir?1:0,
+                static_cast<unsigned long long>(uniformBlocks8),
+                static_cast<unsigned long long>(uniformSamples8),
+                static_cast<unsigned long long>(uniformBlocks4),
+                static_cast<unsigned long long>(uniformSamples4),
+                out.diagnostics.tileProofSafe?1:0,
+                static_cast<unsigned>(out.diagnostics.tileProofVetoReason));
             out.densityHash=densityHash;out.meshHash=HashViewerMesh(mesh);
             out.payloadHash=HashPayload(mesh);out.topologyHash=HashTopology(mesh);
+            out.materialHash=HashMaterialSamples(out.vertices);
             if(key.lod>=4)
             {
                 out.meshHash=SaltFarHorizonHash(out.meshHash,options.farHorizonVersion);
@@ -2436,9 +3110,11 @@ namespace VoxelForgeCore
                 out.topologyHash=SaltFarHorizonHash(out.topologyHash,options.farHorizonVersion);
             }
             out.hasDensityHash=out.hasMeshHash=out.hasPayloadHash=out.hasTopologyHash=true;
+            out.hasMaterialHash=true;
         }
         out.diagnostics.meshAssemblyMilliseconds=std::chrono::duration<double,std::milli>(
             std::chrono::steady_clock::now()-MeshAssemblyStart).count();
+        CopyIslandCacheMetrics();
         return out;
     }
 

Standalone/Core/src/VoxelForgeFieldShared.h

@@ -331,6 +331,28 @@ VF_FIELD_INLINE float VF_FieldPerlin3D(float x,float y,float z)
     return VF_FieldPerlinLerp(y0,y1,sw);
 }
 
+VF_FIELD_INLINE float VF_FieldPassageWallRelief(float x,float y,float z,VF_FieldU32 seed)
+{
+    // Use long, non-commensurate rotated scales. The shared passage wall keeps broad,
+    // uneven rock relief without a short wavelength that can read as repeated rings.
+    const float broad=VF_FieldValueNoise(x+17.0f,y-23.0f,z+11.0f,43,
+        seed^0xB5297A4Du);
+    const float mid=VF_FieldValueNoise(y-7.0f,z+19.0f,x-31.0f,29,
+        seed^0x63D83595u);
+    const float fine=VF_FieldValueNoise(z+5.0f,x+29.0f,y-13.0f,19,
+        seed^0xA511E9B3u);
+    return 0.50f*broad+0.35f*mid+0.15f*fine;
+}
+
+VF_FIELD_INLINE float VF_FieldPassageGroundGrain(float x,float y,VF_FieldU32 seed)
+{
+    const float broad=VF_FieldValueNoise(x+3.25f,y-7.5f,0.0f,8,
+        seed^0xC2B2AE35u);
+    const float fine=VF_FieldValueNoise(y+11.75f,x-5.0f,0.0f,5,
+        seed^0x27D4EB2Fu);
+    return 0.65f*broad+0.35f*fine;
+}
+
 VF_FIELD_INLINE float VF_FieldOwnerFractal(float x,float y,float z,VF_FieldI32 octaves,
     VF_FieldI32 mode)
 {
@@ -372,9 +394,9 @@ VF_FIELD_INLINE float VF_FieldOwnerCellular(float x,float y,float z)
     {
         const VF_FieldI32 nx=cellX+dx,ny=cellY+dy,nz=cellZ+dz;
         const VF_FieldU32 h=VF_FieldVoxelHashMix(
-            VF_FIELD_CAST_U32(nx+0x7FFFFFFF)
-            ^VF_FieldVoxelHashMix(VF_FIELD_CAST_U32(ny+0x7FFFFFFF)*2654435761u)
-            ^VF_FieldVoxelHashMix(VF_FIELD_CAST_U32(nz+0x7FFFFFFF)*374761393u));
+            (VF_FIELD_CAST_U32(nx)+0x7FFFFFFFu)
+            ^VF_FieldVoxelHashMix((VF_FIELD_CAST_U32(ny)+0x7FFFFFFFu)*2654435761u)
+            ^VF_FieldVoxelHashMix((VF_FIELD_CAST_U32(nz)+0x7FFFFFFFu)*374761393u));
         const float fpx=VF_FIELD_CAST_F32(dx)
             +VF_FIELD_CAST_F32(h&0xFFFFFFu)*(1.0f/16777216.0f)-fracX;
         const VF_FieldU32 hy=VF_FieldVoxelHashMix(h^0x12345678u);

Standalone/Core/src/WorldAssemblerInternal.h

@@ -145,6 +145,12 @@ namespace world_assembly_detail
     };
 
     constexpr std::int64_t Q16 = 1ll << 16;
+    constexpr std::int64_t Q32 = 1ll << 32;
+    constexpr std::int64_t SurfaceProfileSubvoxelsPerMetre =
+        WorldAssemblySubvoxelsPerVoxel * 4;
+    constexpr std::int64_t SurfaceProfileMinimumClearanceSubvoxels = 2253;
+    constexpr std::int64_t SurfaceProfileFightClearanceSubvoxels =
+        8 * SurfaceProfileSubvoxelsPerMetre;
     constexpr std::int64_t MinimumCliffShelfThicknessSubvoxels = 2 * WorldAssemblySubvoxelsPerVoxel;
     constexpr std::int64_t MaxSerializedMagnitude = 1000000000000ll;
     constexpr std::size_t MaxBiomeCount = 8;
@@ -228,6 +234,114 @@ namespace world_assembly_detail
     inline bool OutsideRange(std::int64_t value)
     { return value < -MaxSerializedMagnitude || value > MaxSerializedMagnitude; }
 
+    inline bool IsNaturalSurfaceProfile(const WorldAssemblySurfaceProfileV1& profile)
+    { return profile.version == 0 && profile == WorldAssemblySurfaceProfileV1{}; }
+
+    inline bool ValidateSurfaceProfile(const WorldAssemblySurfaceProfileV1& profile,
+        std::uint32_t seed, std::string& error)
+    {
+        if (profile.version == 0)
+        {
+            if (!IsNaturalSurfaceProfile(profile))
+            { error = "natural SurfaceWorld profile must use the all-zero default payload"; return false; }
+            return true;
+        }
+        if (profile.version != 1
+            || !ValidScalar(profile.h0Subvoxels)
+            || !ValidScalar(profile.amplitudeXSubvoxels)
+            || !ValidScalar(profile.amplitudeYSubvoxels)
+            || !ValidScalar(profile.wavelengthXSubvoxels)
+            || !ValidScalar(profile.wavelengthYSubvoxels)
+            || !ValidScalar(profile.mirrorLambdaQ16)
+            || !ValidScalar(profile.minimumArenaClearanceSubvoxels)
+            || profile.minimumArenaClearanceSubvoxels < 0
+            || profile.minimumArenaClearanceSubvoxels > 32 * SurfaceProfileSubvoxelsPerMetre)
+        { error = "SurfaceWorld profile version or fixed-scale value is outside its supported range"; return false; }
+
+        constexpr std::int64_t MinimumPeriodAmplitude = SurfaceProfileSubvoxelsPerMetre / 2;
+        constexpr std::int64_t MaximumPeriodicAmplitude = 3 * SurfaceProfileSubvoxelsPerMetre;
+        constexpr std::int64_t MaximumMirrorAmplitude = 2 * SurfaceProfileSubvoxelsPerMetre;
+        constexpr std::int64_t MinimumWavelength = 80 * SurfaceProfileSubvoxelsPerMetre;
+        constexpr std::int64_t MaximumWavelength = 160 * SurfaceProfileSubvoxelsPerMetre;
+        const bool hasArenaClearance = profile.minimumArenaClearanceSubvoxels == 0
+            || profile.minimumArenaClearanceSubvoxels >= SurfaceProfileFightClearanceSubvoxels;
+        if (!hasArenaClearance)
+        { error = "SurfaceWorld arena clearance must be omitted or at least eight metres"; return false; }
+
+        if (profile.kind == WorldAssemblySurfaceProfileKindV1::periodicHills
+            || profile.kind == WorldAssemblySurfaceProfileKindV1::mirroredRelief)
+        {
+            const std::int64_t maximumAmplitude =
+                profile.kind == WorldAssemblySurfaceProfileKindV1::periodicHills
+                    ? MaximumPeriodicAmplitude : MaximumMirrorAmplitude;
+            if (profile.amplitudeXSubvoxels < MinimumPeriodAmplitude
+                || profile.amplitudeYSubvoxels < MinimumPeriodAmplitude
+                || profile.amplitudeXSubvoxels > maximumAmplitude
+                || profile.amplitudeYSubvoxels > maximumAmplitude
+                || profile.wavelengthXSubvoxels < MinimumWavelength
+                || profile.wavelengthYSubvoxels < MinimumWavelength
+                || profile.wavelengthXSubvoxels > MaximumWavelength
+                || profile.wavelengthYSubvoxels > MaximumWavelength)
+            { error = "periodic SurfaceWorld amplitudes or wavelengths are outside the R20 metre ranges"; return false; }
+
+            // Round every gradient component upward before applying the 15-degree bound.
+            // This makes the integer plan-time check conservative around division boundaries.
+            constexpr std::int64_t TwoPiQ16Ceiling = 411775;
+            constexpr std::int64_t Tan15Q16Floor = 17560;
+            const auto component = [](std::int64_t amplitude, std::int64_t wavelength)
+            {
+                const std::int64_t numerator = TwoPiQ16Ceiling * amplitude;
+                return (numerator + wavelength - 1) / wavelength;
+            };
+            const std::int64_t gx = component(profile.amplitudeXSubvoxels,
+                profile.wavelengthXSubvoxels);
+            const std::int64_t gy = component(profile.amplitudeYSubvoxels,
+                profile.wavelengthYSubvoxels);
+            if (gx * gx + gy * gy > Tan15Q16Floor * Tan15Q16Floor)
+            { error = "periodic SurfaceWorld maximum walk grade exceeds tan(15 degrees)"; return false; }
+
+            if (profile.kind == WorldAssemblySurfaceProfileKindV1::periodicHills)
+            {
+                if (profile.mirrorLambdaQ16 != 0
+                    || profile.phaseXTurnsQ32 != WorldAssemblySurfaceProfileSeededPhaseQ32(seed, 0)
+                    || profile.phaseYTurnsQ32 != WorldAssemblySurfaceProfileSeededPhaseQ32(seed, 1))
+                { error = "periodic-hill phases must be the stable seed-derived Q0.32 phases"; return false; }
+            }
+            else if (profile.mirrorLambdaQ16 < 49152 || profile.mirrorLambdaQ16 > Q16
+                || profile.phaseXTurnsQ32 != WorldAssemblySurfaceProfileSeededPhaseQ32(seed, 0)
+                || profile.phaseYTurnsQ32 != WorldAssemblySurfaceProfileSeededPhaseQ32(seed, 1))
+            { error = "mirrored-relief lambda or seeded phases are outside their supported range"; return false; }
+        }
+        else if (profile.kind == WorldAssemblySurfaceProfileKindV1::flatField)
+        {
+            if (profile.amplitudeXSubvoxels != 0 || profile.amplitudeYSubvoxels != 0
+                || profile.wavelengthXSubvoxels != 0 || profile.wavelengthYSubvoxels != 0
+                || profile.phaseXTurnsQ32 != 0 || profile.phaseYTurnsQ32 != 0
+                || profile.mirrorLambdaQ16 != 0)
+            { error = "flatField must not carry periodic or mirrored relief parameters"; return false; }
+        }
+        else
+        { error = "SurfaceWorld profile kind is unsupported"; return false; }
+        return true;
+    }
+
+    inline void HashSurfaceProfile(std::uint64_t& hash,
+        const WorldAssemblySurfaceProfileV1& profile)
+    {
+        HashWord(hash, 0x5355524650524f31ull, 8);
+        HashWord(hash, profile.version, 4);
+        HashWord(hash, static_cast<std::uint32_t>(profile.kind), 4);
+        HashWord(hash, static_cast<std::uint64_t>(profile.h0Subvoxels), 8);
+        HashWord(hash, static_cast<std::uint64_t>(profile.amplitudeXSubvoxels), 8);
+        HashWord(hash, static_cast<std::uint64_t>(profile.amplitudeYSubvoxels), 8);
+        HashWord(hash, static_cast<std::uint64_t>(profile.wavelengthXSubvoxels), 8);
+        HashWord(hash, static_cast<std::uint64_t>(profile.wavelengthYSubvoxels), 8);
+        HashWord(hash, profile.phaseXTurnsQ32, 4);
+        HashWord(hash, profile.phaseYTurnsQ32, 4);
+        HashWord(hash, static_cast<std::uint64_t>(profile.mirrorLambdaQ16), 8);
+        HashWord(hash, static_cast<std::uint64_t>(profile.minimumArenaClearanceSubvoxels), 8);
+    }
+
     inline bool ValidateRecipe(const WorldAssemblyRecipeV1& recipe, std::string& error)
     {
         if (recipe.schemaVersion != WorldAssemblySchemaVersion
@@ -296,16 +410,57 @@ namespace world_assembly_detail
                 || recipe.biomeClimateMoistureWavelengthSubvoxels <= 0
                 || recipe.biomeClimateReliefContrastQ16 < 0))
         { error = "world assembly climate parameters are outside the supported fixed-scale range"; return false; }
+        if (!ValidateSurfaceProfile(recipe.surfaceProfile, recipe.seed, error)) return false;
+        return true;
+    }
+
+    inline bool ValidateSurfaceProfileGeometry(const WorldAssemblySurfaceProfileV1& profile,
+        const WorldAssemblyStratumPlanV1& stratum, std::int64_t layoutChunkWidthSubvoxels,
+        std::string& error)
+    {
+        if (profile.version == 0) return true;
+        const std::int64_t relief = profile.amplitudeXSubvoxels + profile.amplitudeYSubvoxels;
+        const std::int64_t groundMinimum = profile.h0Subvoxels - relief - 2;
+        const std::int64_t groundMaximum = profile.h0Subvoxels + relief + 2;
+        std::int64_t capSwing = 0;
+        if (profile.kind == WorldAssemblySurfaceProfileKindV1::mirroredRelief)
+        {
+            const std::int64_t product = relief * profile.mirrorLambdaQ16;
+            capSwing = (product + Q16 - 1) / Q16 + 2;
+        }
+        const std::int64_t capMinimum = stratum.capHeightSubvoxels - capSwing;
+        const std::int64_t capMaximum = stratum.capHeightSubvoxels + capSwing;
+        const std::int64_t clearance = capMinimum - groundMaximum;
+        const std::int64_t requiredClearance = std::max(
+            SurfaceProfileMinimumClearanceSubvoxels,
+            profile.minimumArenaClearanceSubvoxels);
+        if (clearance < requiredClearance)
+        { error = "SurfaceWorld profile does not preserve its required floor-to-cap clearance"; return false; }
+
+        const std::int64_t stratumMinimum = static_cast<std::int64_t>(stratum.bottomChunkZ)
+            * layoutChunkWidthSubvoxels;
+        const std::int64_t stratumMaximum = (static_cast<std::int64_t>(stratum.topChunkZ) + 1)
+            * layoutChunkWidthSubvoxels;
+        if (groundMinimum <= stratumMinimum || capMaximum >= stratumMaximum)
+        { error = "SurfaceWorld profile escapes its finite stratum Z bounds"; return false; }
         return true;
     }
 
     inline bool ValidateStratum(const WorldAssemblyStratumPlanV1& stratum,
-        std::int64_t layoutChunkWidthSubvoxels, std::string& error)
+        const WorldAssemblyRecipeV1& recipe, std::string& error)
     {
+        const std::int64_t layoutChunkWidthSubvoxels = recipe.layoutChunkWidthSubvoxels;
         if (stratum.strateIndex < 0 || stratum.topChunkZ < stratum.bottomChunkZ
             || stratum.capWavelengthSubvoxels <= 0 || stratum.capUndulationSubvoxels < 0
             || stratum.features.size() > MaxFeatureCount || stratum.route.size() > MaxRoutePointCount)
         { error = "world assembly stratum plan has an invalid extent or exceeds its bounded payload"; return false; }
+        const WorldAssemblyRecipeV1& effectiveRecipe = stratum.hasRecipeOverride
+            ? stratum.recipeOverride : recipe;
+        if (!ValidateSurfaceProfile(stratum.surfaceProfile, effectiveRecipe.seed, error)) return false;
+        if (stratum.surfaceProfile != effectiveRecipe.surfaceProfile)
+        { error = "SurfaceWorld recipe and stratum plan profile payloads do not match"; return false; }
+        if (!ValidateSurfaceProfileGeometry(stratum.surfaceProfile, stratum,
+                layoutChunkWidthSubvoxels, error)) return false;
         if (!ValidScalar(stratum.capHeightSubvoxels) || !ValidScalar(stratum.capUndulationSubvoxels)
             || !ValidScalar(stratum.capWavelengthSubvoxels)
             || !ValidScalar(stratum.capDetailAmplitudeSubvoxels)
@@ -466,6 +621,8 @@ namespace world_assembly_detail
                     HashWord(hash, static_cast<std::uint64_t>(value), 8);
             }
         }
+        if (recipe.surfaceProfile.version != 0)
+            HashSurfaceProfile(hash, recipe.surfaceProfile);
         return hash;
     }
 
@@ -525,6 +682,8 @@ namespace world_assembly_detail
             for (const auto value : point.positionSubvoxels) HashWord(hash, static_cast<std::uint64_t>(value), 8);
             HashWord(hash, static_cast<std::uint64_t>(point.radiusSubvoxels), 8);
         }
+        if (stratum.surfaceProfile.version != 0)
+            HashSurfaceProfile(hash, stratum.surfaceProfile);
         return hash;
     }
 
@@ -627,6 +786,59 @@ namespace world_assembly_detail
         return out.str();
     }
 
+    inline const char* SurfaceProfileKindName(WorldAssemblySurfaceProfileKindV1 kind)
+    {
+        switch (kind)
+        {
+        case WorldAssemblySurfaceProfileKindV1::natural: return "natural";
+        case WorldAssemblySurfaceProfileKindV1::periodicHills: return "periodicHills";
+        case WorldAssemblySurfaceProfileKindV1::mirroredRelief: return "mirroredRelief";
+        case WorldAssemblySurfaceProfileKindV1::flatField: return "flatField";
+        }
+        return "unsupported";
+    }
+
+    inline bool ParseSurfaceProfile(const VFJson::Value& value,
+        WorldAssemblySurfaceProfileV1& profile)
+    {
+        if (!value.IsObject() || !ReadU32(value.Get("version"), profile.version)) return false;
+        const auto* kind = std::get_if<std::string>(&value.Get("kind").Data);
+        if (kind == nullptr) return false;
+        if (*kind == "periodicHills") profile.kind = WorldAssemblySurfaceProfileKindV1::periodicHills;
+        else if (*kind == "mirroredRelief") profile.kind = WorldAssemblySurfaceProfileKindV1::mirroredRelief;
+        else if (*kind == "flatField") profile.kind = WorldAssemblySurfaceProfileKindV1::flatField;
+        else if (*kind == "natural") profile.kind = WorldAssemblySurfaceProfileKindV1::natural;
+        else return false;
+        return ReadInteger(value.Get("h0_q"), profile.h0Subvoxels)
+            && ReadInteger(value.Get("amplitude_x_q"), profile.amplitudeXSubvoxels)
+            && ReadInteger(value.Get("amplitude_y_q"), profile.amplitudeYSubvoxels)
+            && ReadInteger(value.Get("wavelength_x_q"), profile.wavelengthXSubvoxels)
+            && ReadInteger(value.Get("wavelength_y_q"), profile.wavelengthYSubvoxels)
+            && ReadU32(value.Get("phase_x_turns_q32"), profile.phaseXTurnsQ32)
+            && ReadU32(value.Get("phase_y_turns_q32"), profile.phaseYTurnsQ32)
+            && ReadInteger(value.Get("mirror_lambda_q16"), profile.mirrorLambdaQ16)
+            && ReadInteger(value.Get("minimum_arena_clearance_q"),
+                profile.minimumArenaClearanceSubvoxels);
+    }
+
+    inline std::string SurfaceProfileJson(const WorldAssemblySurfaceProfileV1& profile)
+    {
+        std::ostringstream out;
+        out << "{\"version\":" << profile.version
+            << ",\"kind\":\"" << SurfaceProfileKindName(profile.kind) << "\""
+            << ",\"h0_q\":" << profile.h0Subvoxels
+            << ",\"amplitude_x_q\":" << profile.amplitudeXSubvoxels
+            << ",\"amplitude_y_q\":" << profile.amplitudeYSubvoxels
+            << ",\"wavelength_x_q\":" << profile.wavelengthXSubvoxels
+            << ",\"wavelength_y_q\":" << profile.wavelengthYSubvoxels
+            << ",\"phase_x_turns_q32\":" << profile.phaseXTurnsQ32
+            << ",\"phase_y_turns_q32\":" << profile.phaseYTurnsQ32
+            << ",\"mirror_lambda_q16\":" << profile.mirrorLambdaQ16
+            << ",\"minimum_arena_clearance_q\":"
+            << profile.minimumArenaClearanceSubvoxels << '}';
+        return out.str();
+    }
+
     inline bool ParseRecipe(const VFJson::Value& value, WorldAssemblyRecipeV1& recipe,
                             std::string& error)
     {
@@ -647,6 +859,10 @@ namespace world_assembly_detail
                 || !ReadInteger(value.Get("climate_moisture_wavelength_q"), recipe.biomeClimateMoistureWavelengthSubvoxels)
                 || !ReadInteger(value.Get("climate_relief_contrast_q16"), recipe.biomeClimateReliefContrastQ16)))
         { error = "world assembly recipe is missing evaluator-2 climate parameters"; return false; }
+        const VFJson::Value& surfaceProfileValue = value.Get("surface_profile");
+        if (!std::holds_alternative<std::nullptr_t>(surfaceProfileValue.Data)
+            && !ParseSurfaceProfile(surfaceProfileValue, recipe.surfaceProfile))
+        { error = "world assembly recipe has a malformed versioned SurfaceWorld profile"; return false; }
         for (const auto& item : value.Get("biomes").AsArray())
         {
             WorldAssemblyBiomeProfileV1 biome;
@@ -709,6 +925,8 @@ namespace world_assembly_detail
             out << ",\"climate_relief_wavelength_q\":" << recipe.biomeClimateReliefWavelengthSubvoxels
                 << ",\"climate_moisture_wavelength_q\":" << recipe.biomeClimateMoistureWavelengthSubvoxels
                 << ",\"climate_relief_contrast_q16\":" << recipe.biomeClimateReliefContrastQ16;
+        if (recipe.surfaceProfile.version != 0)
+            out << ",\"surface_profile\":" << SurfaceProfileJson(recipe.surfaceProfile);
         out << ",\"content_hash\":\"" << HashText(recipe.contentHash) << "\",\"biomes\":[";
         for (std::size_t i = 0; i < recipe.biomes.size(); ++i)
         {
@@ -797,6 +1015,10 @@ namespace world_assembly_detail
             { error = "world assembly stratum has malformed optional evaluator-2 fields"; return false; }
             if(hasWaterBoolean)stratum.waterEnabled=waterEnabled.Boolean(false);
             if(hasWaterNumber)stratum.waterEnabled=waterEnabled.Number()!=0.0;
+            const VFJson::Value& surfaceProfileValue = item.Get("surface_profile");
+            if (!std::holds_alternative<std::nullptr_t>(surfaceProfileValue.Data)
+                && !ParseSurfaceProfile(surfaceProfileValue, stratum.surfaceProfile))
+            { error = "world assembly stratum has a malformed versioned SurfaceWorld profile"; return false; }
             const VFJson::Value& routeConstraintsValue = item.Get("route_constraints");
             if (!std::holds_alternative<std::nullptr_t>(routeConstraintsValue.Data))
             {
@@ -1367,6 +1589,196 @@ namespace world_assembly_detail
         return SmoothQ16(static_cast<std::uint32_t>(std::clamp<std::int64_t>(edge*Q16/feather,0,Q16)));
     }
 
+    constexpr std::int64_t Q30 = 1ll << 30;
+    constexpr std::array<std::int64_t, 30> CordicAtanTurnsQ32{{
+        536870912,316933406,167458907,85004756,42667331,21354465,10679838,5340245,
+        2670163,1335087,667544,333772,166886,83443,41722,20861,10430,5215,2608,
+        1304,652,326,163,81,41,20,10,5,3,1}};
+
+    inline std::array<std::int64_t, 2> CordicSinCosQuarterQ30(std::uint32_t angleQ32)
+    {
+        if (angleQ32 == 0) return {Q30, 0};
+        std::int64_t x = 652032874, y = 0;
+        std::int64_t z = angleQ32;
+        for (std::size_t i = 0; i < CordicAtanTurnsQ32.size(); ++i)
+        {
+            const std::int64_t oldX = x;
+            if (z >= 0)
+            {
+                x -= y >> i;
+                y += oldX >> i;
+                z -= CordicAtanTurnsQ32[i];
+            }
+            else
+            {
+                x += y >> i;
+                y -= oldX >> i;
+                z += CordicAtanTurnsQ32[i];
+            }
+        }
+        return {std::clamp<std::int64_t>(x, -Q30, Q30),
+            std::clamp<std::int64_t>(y, -Q30, Q30)};
+    }
+
+    inline std::int64_t CosineQ30(std::uint32_t phaseTurnsQ32)
+    {
+        constexpr std::uint32_t Quarter = 1u << 30;
+        if (phaseTurnsQ32 == 0) return Q30;
+        if (phaseTurnsQ32 == Quarter) return 0;
+        if (phaseTurnsQ32 == 2u * Quarter) return -Q30;
+        if (phaseTurnsQ32 == 3u * Quarter) return 0;
+        constexpr std::uint32_t TableBits = 16;
+        constexpr std::uint32_t TableSize = 1u << TableBits;
+        constexpr std::uint32_t FractionMask = (1u << (32 - TableBits)) - 1u;
+        static const std::array<std::int32_t, TableSize> table = []
+        {
+            std::array<std::int32_t, TableSize> values{};
+            constexpr std::uint32_t QuarterTableSize = TableSize / 4;
+            constexpr std::uint32_t QuarterStepQ32 = 1u << (30 - (TableBits - 2));
+            std::array<std::int32_t, QuarterTableSize + 1> quarter{};
+            for (std::uint32_t offset = 0; offset <= QuarterTableSize; ++offset)
+            {
+                const std::int64_t cosine = CordicSinCosQuarterQ30(
+                    offset * QuarterStepQ32)[0];
+                const std::int64_t monotone = offset == 0 ? cosine
+                    : std::min<std::int64_t>(quarter[offset - 1], cosine);
+                quarter[offset] = static_cast<std::int32_t>(monotone);
+            }
+            for (std::uint32_t index = 0; index < TableSize; ++index)
+            {
+                const std::uint32_t quadrant = index / QuarterTableSize;
+                const std::uint32_t offset = index % QuarterTableSize;
+                const std::uint32_t mirroredOffset = QuarterTableSize - offset;
+                const std::int32_t value = quadrant == 0 ? quarter[offset]
+                    : quadrant == 1 ? -quarter[mirroredOffset]
+                    : quadrant == 2 ? -quarter[offset] : quarter[mirroredOffset];
+                values[index] = value;
+            }
+            return values;
+        }();
+        const std::uint32_t index = phaseTurnsQ32 >> (32 - TableBits);
+        const std::uint32_t fraction = phaseTurnsQ32 & FractionMask;
+        const std::int64_t first = table[index];
+        const std::int64_t second = table[(index + 1u) & (TableSize - 1u)];
+        const std::int64_t numerator = (second - first) * fraction;
+        const std::int64_t rounded = numerator >= 0
+            ? numerator + (1ll << (31 - TableBits))
+            : numerator - (1ll << (31 - TableBits));
+        // The fixed-point table interpolation is monotone within each quadrant;
+        // cosine interval bounds therefore still attain extrema at their endpoints
+        // or at the exact quarter-turn extrema checked below.
+        return first + rounded / (1ll << (32 - TableBits));
+    }
+
+    inline std::uint32_t SurfaceProfileTurnAtCoordinate(std::int64_t coordinate,
+        std::int64_t wavelength, std::uint32_t phaseTurnsQ32)
+    {
+        const std::uint64_t coordinateTurns = static_cast<std::uint64_t>(
+            FloorMod(coordinate, wavelength)) * static_cast<std::uint64_t>(Q32)
+            / static_cast<std::uint64_t>(wavelength);
+        return phaseTurnsQ32 + static_cast<std::uint32_t>(coordinateTurns);
+    }
+
+    struct CosineRangeQ30
+    {
+        std::int64_t minimum = -Q30;
+        std::int64_t maximum = Q30;
+    };
+
+    inline CosineRangeQ30 SurfaceProfileCosineRangeQ30(std::int64_t minimumCoordinate,
+        std::int64_t maximumCoordinate, std::int64_t wavelength,
+        std::uint32_t phaseTurnsQ32)
+    {
+        if (wavelength <= 0 || minimumCoordinate > maximumCoordinate
+            || maximumCoordinate - minimumCoordinate >= wavelength)
+            return {};
+
+        CosineRangeQ30 range;
+        const std::int64_t cosineAtMinimum = CosineQ30(
+            SurfaceProfileTurnAtCoordinate(minimumCoordinate, wavelength, phaseTurnsQ32));
+        const std::int64_t cosineAtMaximum = CosineQ30(
+            SurfaceProfileTurnAtCoordinate(maximumCoordinate, wavelength, phaseTurnsQ32));
+        range.minimum = std::min(cosineAtMinimum, cosineAtMaximum);
+        range.maximum = std::max(cosineAtMinimum, cosineAtMaximum);
+
+        // Coordinate turns are Q0.32. Test the exact analytic extrema in a common
+        // rational numerator domain; one Q0.32 unit of endpoint slack accounts for
+        // the fixed phase conversion used by point().
+        const std::uint64_t periodNumerator = static_cast<std::uint64_t>(wavelength)
+            * static_cast<std::uint64_t>(Q32);
+        const std::uint64_t startNumerator = (
+            static_cast<std::uint64_t>(FloorMod(minimumCoordinate, wavelength))
+                * static_cast<std::uint64_t>(Q32)
+            + static_cast<std::uint64_t>(phaseTurnsQ32)
+                * static_cast<std::uint64_t>(wavelength)) % periodNumerator;
+        const std::uint64_t spanNumerator = static_cast<std::uint64_t>(
+            maximumCoordinate - minimumCoordinate) * static_cast<std::uint64_t>(Q32);
+        const auto includesExtremum = [&](std::uint64_t target)
+        {
+            const std::uint64_t forward = target >= startNumerator
+                ? target - startNumerator : periodNumerator - startNumerator + target;
+            const std::uint64_t backward = periodNumerator - forward;
+            return forward <= spanNumerator + wavelength
+                || backward <= wavelength;
+        };
+        if (includesExtremum(0)) range.maximum = Q30;
+        if (includesExtremum(periodNumerator / 2)) range.minimum = -Q30;
+        return range;
+    }
+
+    inline std::int64_t MulQ30(std::int64_t value, std::int64_t cosineQ30)
+    { return (value * cosineQ30) / Q30; }
+
+    struct SurfaceProfileColumnBounds
+    {
+        std::int64_t groundMinimum = 0;
+        std::int64_t groundMaximum = 0;
+        std::int64_t capMinimum = 0;
+        std::int64_t capMaximum = 0;
+    };
+
+    inline SurfaceProfileColumnBounds ProfileColumnBounds(
+        const WorldAssemblySurfaceProfileV1& profile,
+        const WorldAssemblyStratumPlanV1& plan,
+        std::int64_t minimumX, std::int64_t minimumY,
+        std::int64_t maximumX, std::int64_t maximumY)
+    {
+        SurfaceProfileColumnBounds bounds;
+        if (profile.kind == WorldAssemblySurfaceProfileKindV1::flatField)
+        {
+            bounds.groundMinimum = profile.h0Subvoxels;
+            bounds.groundMaximum = profile.h0Subvoxels;
+            bounds.capMinimum = plan.capHeightSubvoxels;
+            bounds.capMaximum = plan.capHeightSubvoxels;
+            return bounds;
+        }
+        const CosineRangeQ30 x = SurfaceProfileCosineRangeQ30(minimumX, maximumX,
+            profile.wavelengthXSubvoxels, profile.phaseXTurnsQ32);
+        const CosineRangeQ30 y = SurfaceProfileCosineRangeQ30(minimumY, maximumY,
+            profile.wavelengthYSubvoxels, profile.phaseYTurnsQ32);
+        const std::int64_t groundXMinimum = MulQ30(profile.amplitudeXSubvoxels, x.minimum);
+        const std::int64_t groundXMaximum = MulQ30(profile.amplitudeXSubvoxels, x.maximum);
+        const std::int64_t groundYMinimum = MulQ30(profile.amplitudeYSubvoxels, y.minimum);
+        const std::int64_t groundYMaximum = MulQ30(profile.amplitudeYSubvoxels, y.maximum);
+        bounds.groundMinimum = profile.h0Subvoxels + groundXMinimum + groundYMinimum - 2;
+        bounds.groundMaximum = profile.h0Subvoxels + groundXMaximum + groundYMaximum + 2;
+        if (profile.kind == WorldAssemblySurfaceProfileKindV1::mirroredRelief)
+        {
+            const std::int64_t reliefMinimum = groundXMinimum + groundYMinimum;
+            const std::int64_t reliefMaximum = groundXMaximum + groundYMaximum;
+            bounds.capMinimum = plan.capHeightSubvoxels
+                - MulQ16(reliefMaximum, profile.mirrorLambdaQ16) - 2;
+            bounds.capMaximum = plan.capHeightSubvoxels
+                - MulQ16(reliefMinimum, profile.mirrorLambdaQ16) + 2;
+        }
+        else
+        {
+            bounds.capMinimum = plan.capHeightSubvoxels;
+            bounds.capMaximum = plan.capHeightSubvoxels;
+        }
+        return bounds;
+    }
+
     struct HeightfieldColumnCacheEntry
     {
         const WorldAssemblyRecipeV1* recipe = nullptr;
@@ -1415,6 +1827,61 @@ namespace world_assembly_detail
         HeightfieldPointSample out;
         if(recipe.evaluatorVersion>=2)
         {
+            if (recipe.surfaceProfile.version == 1)
+            {
+                const auto& profile = recipe.surfaceProfile;
+                std::int64_t relief = 0;
+                if (profile.kind != WorldAssemblySurfaceProfileKindV1::flatField)
+                {
+                    const std::int64_t cosineX = CosineQ30(SurfaceProfileTurnAtCoordinate(
+                        x, profile.wavelengthXSubvoxels, profile.phaseXTurnsQ32));
+                    const std::int64_t cosineY = CosineQ30(SurfaceProfileTurnAtCoordinate(
+                        y, profile.wavelengthYSubvoxels, profile.phaseYTurnsQ32));
+                    relief = MulQ30(profile.amplitudeXSubvoxels, cosineX)
+                        + MulQ30(profile.amplitudeYSubvoxels, cosineY);
+                }
+                out.groundHeightSubvoxels = profile.h0Subvoxels + relief;
+                out.capHeightSubvoxels = profile.kind
+                    == WorldAssemblySurfaceProfileKindV1::mirroredRelief
+                    ? plan.capHeightSubvoxels - MulQ16(relief, profile.mirrorLambdaQ16)
+                    : plan.capHeightSubvoxels;
+                out.biomeId = recipe.biomes.front().stableId;
+                out.neighborBiomeId = out.biomeId;
+                out.biomeWeightQ16 = static_cast<std::uint32_t>(Q16);
+                const auto* list = ScopedWorldAssemblyFeatureQueriesV1::find(
+                    &recipe, &plan, x, y, 0, true);
+                for (const auto& feature : FeatureRange{plan.features, list})
+                {
+                    if (feature.type == 1)
+                    {
+                        const std::uint32_t fade = FeatureFadeQ16(feature, x, y,
+                            feature.parametersSubvoxels[1]);
+                        if (fade) out.groundHeightSubvoxels += MulQ16(
+                            feature.parametersSubvoxels[0], fade);
+                    }
+                    else if (feature.type == 3)
+                    {
+                        const std::uint32_t fade = FeatureFadeQ16(feature, x, y,
+                            feature.parametersSubvoxels[2]);
+                        const std::int64_t wave = std::max<std::int64_t>(
+                            1, feature.parametersSubvoxels[1]);
+                        if (fade)
+                        {
+                            const std::uint32_t featureSeed = static_cast<std::uint32_t>(feature.stableId);
+                            const std::int64_t nx = NoiseCoordinateQ16(x, wave)
+                                + SeedOffsetQ16(featureSeed, 1700);
+                            const std::int64_t ny = NoiseCoordinateQ16(y, wave)
+                                + SeedOffsetQ16(featureSeed, 2900);
+                            const std::int32_t noise = FractalNoiseQ16(nx, ny,
+                                SeedOffsetQ16(featureSeed, 4100), 3);
+                            out.capHeightSubvoxels += MulQ16(MulQ16(noise,
+                                feature.parametersSubvoxels[0]), fade);
+                        }
+                    }
+                }
+                out.waterSurfaceSubvoxels = plan.waterSurfaceSubvoxels;
+                return out;
+            }
             const BiomeSelectionV2 selection=SelectBiomeV2(recipe,x,y);
             const auto& primary=recipe.biomes[selection.primary];
             const auto& neighbor=recipe.biomes[selection.neighbor];
@@ -1742,6 +2209,16 @@ std::optional<WorldAssemblyManifest> WorldAssemblyManifest::FromJson(
 
 bool WorldAssemblyManifest::finalize(std::string& error)
 {
+    ResolveWorldAssemblySurfaceProfilePhasesV1(recipe.surfaceProfile, recipe.seed);
+    for (auto& stratum : plan.strates)
+    {
+        WorldAssemblyRecipeV1& effectiveRecipe = stratum.hasRecipeOverride
+            ? stratum.recipeOverride : recipe;
+        ResolveWorldAssemblySurfaceProfilePhasesV1(effectiveRecipe.surfaceProfile,
+            effectiveRecipe.seed);
+        ResolveWorldAssemblySurfaceProfilePhasesV1(stratum.surfaceProfile,
+            effectiveRecipe.seed);
+    }
     if (schemaVersion != WorldAssemblySchemaVersion || plan.schemaVersion != WorldAssemblySchemaVersion
         || !world_assembly_detail::ValidateRecipe(recipe, error))
     { if (error.empty()) error = "world assembly manifest or plan version is unsupported"; return false; }
@@ -1759,7 +2236,7 @@ bool WorldAssemblyManifest::finalize(std::string& error)
             { error = "SurfaceWorld stratum recipe seed does not match the world assembly season seed"; return false; }
             stratum.recipeOverride.contentHash = world_assembly_detail::HashRecipe(stratum.recipeOverride);
         }
-        if (!world_assembly_detail::ValidateStratum(stratum, recipe.layoutChunkWidthSubvoxels, error)) return false;
+        if (!world_assembly_detail::ValidateStratum(stratum, recipe, error)) return false;
         if (recipe.evaluatorVersion >= 4)
         {
             if (stratum.routeConstraints.version != 1 || stratum.route.size() < 2)
@@ -1882,6 +2359,9 @@ std::string WorldAssemblyManifest::ToJson() const
         if (stratum.hasRecipeOverride)
             out << ",\"recipe_override\":"
                 << world_assembly_detail::RecipeJson(stratum.recipeOverride);
+        if (stratum.surfaceProfile.version != 0)
+            out << ",\"surface_profile\":"
+                << world_assembly_detail::SurfaceProfileJson(stratum.surfaceProfile);
         out
             << ",\"content_hash\":\"" << world_assembly_detail::HashText(stratum.contentHash)
             << "\",\"features\":[";
@@ -1957,6 +2437,8 @@ bool Heightfield2D::isValid() const noexcept
         || recipe_->biomes.empty() || recipe_->biomes.size() > world_assembly_detail::MaxBiomeCount
         || recipe_->biomeCellSizeSubvoxels <= 0 || recipe_->biomeWarpWavelengthSubvoxels <= 0
         || recipe_->biomeWarpSubvoxels < 0 || recipe_->biomeBorderBlendSubvoxels < 0
+        || recipe_->surfaceProfile != plan_->surfaceProfile
+        || recipe_->surfaceProfile.version > 1
         || plan_->strateIndex < 0 || plan_->topChunkZ < plan_->bottomChunkZ
         || plan_->capWavelengthSubvoxels <= 0 || plan_->capUndulationSubvoxels < 0)
         return false;
@@ -1973,6 +2455,32 @@ bool Heightfield2D::isValid() const noexcept
 std::array<std::int64_t,2> Heightfield2D::capHeightBounds() const noexcept
 {
     if(!isValid())return {0,0};
+    if (recipe_->surfaceProfile.version == 1)
+    {
+        const auto& profile = recipe_->surfaceProfile;
+        std::int64_t swing = 0;
+        if (profile.kind == WorldAssemblySurfaceProfileKindV1::mirroredRelief)
+        {
+            const std::int64_t relief = profile.amplitudeXSubvoxels
+                + profile.amplitudeYSubvoxels;
+            swing = (relief * profile.mirrorLambdaQ16 + world_assembly_detail::Q16 - 1)
+                / world_assembly_detail::Q16 + 2;
+        }
+        std::int64_t featureAmplitude = 0;
+        for (const auto& feature : plan_->features)
+            if (feature.type == 3)
+                featureAmplitude += std::abs(feature.parametersSubvoxels[0]);
+        std::int64_t minimum = plan_->capHeightSubvoxels - swing - featureAmplitude;
+        std::int64_t maximum = plan_->capHeightSubvoxels + swing + featureAmplitude;
+        if (recipe_->evaluatorVersion >= 5)
+        {
+            const std::int64_t upperBoundary = (static_cast<std::int64_t>(plan_->topChunkZ) + 1)
+                * recipe_->layoutChunkWidthSubvoxels;
+            minimum = std::min(minimum, upperBoundary);
+            maximum = std::min(maximum, upperBoundary);
+        }
+        return {minimum, maximum};
+    }
     long double Minimum=std::numeric_limits<long double>::infinity();
     long double Maximum=-std::numeric_limits<long double>::infinity();
     const auto IncludeBiome=[&](const WorldAssemblyBiomeProfileV1& Biome)
@@ -2178,6 +2686,15 @@ HeightfieldBoxClass Heightfield2D::classifyLatticeBox(std::int64_t minimumX,
             &&feature.minimumSubvoxels[2]<=maximumZ&&feature.maximumSubvoxels[2]>=minimumZ)
             return HeightfieldBoxClass::mixed;
     }
+    if (recipe_->surfaceProfile.version == 1)
+    {
+        const FieldInterval proof = interval(minimumX, minimumY, minimumZ,
+            maximumX, maximumY, maximumZ);
+        if (!proof.known) return HeightfieldBoxClass::unknown;
+        if (proof.minimumDensitySubvoxels > 0) return HeightfieldBoxClass::allAir;
+        if (proof.maximumDensitySubvoxels < 0) return HeightfieldBoxClass::allSolid;
+        return HeightfieldBoxClass::mixed;
+    }
     const std::int64_t stride=static_cast<std::int64_t>(stepVoxels)
         *WorldAssemblySubvoxelsPerVoxel;
     if((maximumX-minimumX)%stride!=0||(maximumY-minimumY)%stride!=0
@@ -2220,7 +2737,29 @@ FieldInterval Heightfield2D::interval(std::int64_t minX, std::int64_t minY,
     std::int64_t groundMax = std::numeric_limits<std::int64_t>::min();
     std::int64_t capMin=plan_->capHeightSubvoxels-plan_->capUndulationSubvoxels;
     std::int64_t capMax=plan_->capHeightSubvoxels+plan_->capUndulationSubvoxels;
-    if(recipe_->evaluatorVersion>=2)
+    if (recipe_->surfaceProfile.version == 1)
+    {
+        const auto profileBounds = world_assembly_detail::ProfileColumnBounds(
+            recipe_->surfaceProfile, *plan_, minX, minY, maxX, maxY);
+        groundMin = profileBounds.groundMinimum;
+        groundMax = profileBounds.groundMaximum;
+        capMin = profileBounds.capMinimum;
+        capMax = profileBounds.capMaximum;
+        std::int64_t groundFeatureMagnitude = 0;
+        std::int64_t capFeatureMagnitude = 0;
+        for (const auto& feature : plan_->features)
+        {
+            if (feature.type == 1)
+                groundFeatureMagnitude += std::abs(feature.parametersSubvoxels[0]);
+            if (feature.type == 3)
+                capFeatureMagnitude += std::abs(feature.parametersSubvoxels[0]);
+        }
+        groundMin -= groundFeatureMagnitude;
+        groundMax += groundFeatureMagnitude;
+        capMin -= capFeatureMagnitude;
+        capMax += capFeatureMagnitude;
+    }
+    else if(recipe_->evaluatorVersion>=2)
     {
         for(const auto& biome:recipe_->biomes)
         {
@@ -2313,6 +2852,24 @@ FieldDetailEnvelope Heightfield2D::detailEnvelope() const noexcept
 {
     FieldDetailEnvelope out;
     if (!isValid()) return out;
+    if (recipe_->surfaceProfile.version == 1)
+    {
+        const auto& profile = recipe_->surfaceProfile;
+        out.maximumAbsoluteDisplacementSubvoxels = profile.amplitudeXSubvoxels
+            + profile.amplitudeYSubvoxels;
+        if (profile.kind == WorldAssemblySurfaceProfileKindV1::mirroredRelief)
+            out.maximumAbsoluteDisplacementSubvoxels +=
+                (out.maximumAbsoluteDisplacementSubvoxels * profile.mirrorLambdaQ16
+                    + world_assembly_detail::Q16 - 1) / world_assembly_detail::Q16;
+        for (const auto& feature : plan_->features)
+            if (feature.type == 1 || feature.type == 3)
+                out.maximumAbsoluteDisplacementSubvoxels +=
+                    std::abs(feature.parametersSubvoxels[0]);
+        if (profile.kind != WorldAssemblySurfaceProfileKindV1::flatField)
+            out.minimumFeatureSizeSubvoxels = std::max<std::int64_t>(1,
+                std::min(profile.wavelengthXSubvoxels, profile.wavelengthYSubvoxels) / 2);
+        return out;
+    }
     std::int64_t maximum = plan_->capUndulationSubvoxels*5/2
         +plan_->capDetailAmplitudeSubvoxels*5/2+plan_->capRidgeAmplitudeSubvoxels;
     std::int64_t minimumFeature = std::numeric_limits<std::int64_t>::max();
@@ -2448,7 +3005,8 @@ WorldAssemblyBoundsAuditResult AuditHeightfieldBounds(const Heightfield2D& block
             &result.capBoxes,false,"cap");
     }
     bool hasCliffProfile=false;
-    for(const auto& biome:recipe->biomes)hasCliffProfile|=biome.cliffStrengthQ16>0;
+    if(recipe->surfaceProfile.version==0)
+        for(const auto& biome:recipe->biomes)hasCliffProfile|=biome.cliffStrengthQ16>0;
     if(hasCliffProfile)
     {
         const std::int64_t d=16*WorldAssemblySubvoxelsPerVoxel;
@@ -2488,7 +3046,8 @@ WorldAssemblyBoundsAuditResult AuditHeightfieldBounds(const Heightfield2D& block
     // Controle negatif : cette plage unilaterale exclut un echantillon connu; l'audit doit rejeter cette borne mensongere.
     const FieldInterval deliberatelyWrong{true, controlPoint + 1, controlPoint + 2};
     result.negativeControlDetected = !world_assembly_detail::InInterval(deliberatelyWrong, controlPoint);
-    const bool borderCoverage=recipe->biomes.size()<2||recipe->biomeBorderBlendSubvoxels==0
+    const bool borderCoverage=recipe->surfaceProfile.version!=0
+        ||recipe->biomes.size()<2||recipe->biomeBorderBlendSubvoxels==0
         ||result.biomeBorderBoxes>0;
     const bool cliffCoverage=!hasCliffProfile||result.cliffBoxes>0;
     const bool exceptionCoverage=std::none_of(plan->features.begin(),plan->features.end(),

Standalone/DESIGN_WORLD_ASSEMBLER.md

@@ -83,6 +83,12 @@ Costs below are design estimates, not timings. Low means bounded analytic featur
 
 A passage planner must produce a traversable route or pair a non-walkable visual passage with another guaranteed route. A narrow crack or drop cannot be assumed walkable because its centerline is air.
 
+For a SurfaceWorld strate, the supported arrival-to-departure route follows the sampled terrain
+ground and stays within the mouth placement bounds. The inter-strate departure passage owns the
+descent from that ground mouth through rock and bedrock. Treating the bottom of a tall SurfaceWorld
+strate as the route's departure height would ask the walk planner to cross open terrain air; it is
+the wrong endpoint for the intra-strate route.
+
 | Passage type | Planner output | Bound and likely cost |
 |---|---|---|
 | SlopedTunnel | Straight-style path with switchbacks as needed, capsule clearance, supported floor, maximum grade and landing geometry. | Swept capsule bounds plus floor envelope; low–medium. |

Standalone/Research/WorldAssemblerM3/Astra1/BRIEF-pass2.md

@@ -0,0 +1,48 @@
+Thank you, that was a strong first pass. Your scope warning about L76 was right and important. I need to correct my
+brief: "about 75% of field time is the passage composer" was **wrong**.
+- L76's term profiler covered only about 6.0M legacy samples for FI (5.6M for TN).
+- L73 counts about 52M density calls per FI or TN whole view: 512 LOD0 tiles × 44,121, 448 LOD1 × 43,322, and so
+  on.
+- The measured passage/support cost is about 6.5 of FI's ~40 field worker-seconds (~15%), not 75%. Roughly
+  30 worker-seconds of field time is not attributed to any term we've measured.
+
+Your gain arithmetic for recommendation 1 inherited that error. Please redo it.
+
+## Deeper pass (you now have more reasoning budget)
+
+Examine **the whole generation chain**, end to end, for one cold whole view on the legacy FI/TN path. For each
+stage, say what it does, how often it runs, what it costs per call (from code structure and the measured numbers),
+and whether its work is necessary:
+- world/plan resolution;
+- tile key selection;
+- `ClassifyBoxDetailed`;
+- the dispatch into `AnalyticDensityAt` (and whatever runs for the ~46M calls the term profiler did not see);
+- the composer;
+- grid fill;
+- MC;
+- normals;
+- skirts;
+- ground/cap refinement;
+- payload;
+- Unreal publication.
+
+The central question: **where do the unattributed ~30 worker-seconds most plausibly go?** For example:
+- a different evaluation path the profiler doesn't instrument;
+- per-call overhead outside the timed terms (dispatch, stratum lookup, virtual calls, allocation, cache misses);
+- border/halo samples evaluated twice;
+- normals sampling the field again;
+- duplicated work between neighbouring tiles or LODs.
+
+Give file:line for each. Then name the cheapest measurement that would confirm your top explanation, so the next
+implementation round can verify it first.
+
+Then **revise your ranked recommendations** in the light of the whole chain. Keep what still holds and drop what
+doesn't. Add anything the chain review reveals.
+
+Same rules as before:
+- read-only;
+- no edits anywhere, including temp files;
+- web allowed;
+- labels [CODE]/[MEASURED]/[PRIOR ART]/[INFERENCE].
+- At most ~3,500 words.
+- **Lead with the stage-by-stage cost map**, then the revised ranking.

Standalone/Research/WorldAssemblerM3/Astra1/BRIEF.md

@@ -0,0 +1,133 @@
+# VoxelForge — design review: how do we get a cold whole view from ~2.5–4.6 s to ~1 s?
+
+You're reviewing a voxel terrain generator's performance architecture. **Read and reason only.** Don't edit,
+build, run tests, commit or stash. You may read any file in this repository and search the web.
+
+We've spent about 15 rounds finding and fixing hot spots, and the gains are shrinking. We want fresh eyes on the
+*approach*, not another micro-optimisation. Question our framing where it's wrong.
+
+## The system (summary, so you don't have to rediscover it)
+
+**VoxelForge** is a UE5 plugin for underground density-field terrain. Generation lives in a standalone C++
+library, "Core" (`Standalone/Core/`), that Unreal calls through an adapter
+(`Source/VoxelForge/Private/VoxelForgeCoreAdapter.cpp`).
+- **The field.** Density is a *function*, not stored data: negative = solid. Core voxels are 25 cm. Tiles hold
+  32³ voxels.
+- **Clipmap.** LOD0–8; each LOD doubles the voxel step. A "whole view" is about 2,250–2,850 tiles across all LODs
+  around one camera.
+- **Meshing.** Marching cubes per tile (about 35³ samples per LOD0/1 tile with borders), plus normals and skirts.
+- **The world is a vertical stack of "strates".** Each is ceiling → content → bedrock, with its own generator:
+  - SurfaceWorld (SW): heightfield, native path;
+  - FloatingIslands (FI), TunnelNetwork (TN) and VerticalShafts (VS): the "legacy compiled-analytic" path.
+- **The owner's test world** stacks four of them: SW 512 m, FI 240 m, TN 128 m, VS 128 m tall.
+- **Passages.** Walkable, winding, natural-looking tunnels near (0,0) connect each strate to the next. They're
+  carved by a shared "composer" that also adds support treads, boundary bands and mouth shaping.
+- **Multiplayer.** No geometry is replicated. Every peer regenerates from the seed, the layout and a diff of
+  player edits. That's why peer determinism is mandatory.
+
+## The goal and constraints
+
+- **Goal:** about 1 s cold whole view at any strate arrival on the owner's PC (Ryzen 5800X3D, 8 cores/16 threads,
+  7900 XTX). Streaming must stay smooth in VR (Quest 3) and at high travel speed.
+- **Must hold:**
+  - peer determinism (same inputs → same world on every machine);
+  - no visible quality regression;
+  - passages stay walkable from arrival mouth to departure mouth (capsule, support and grade audits exist);
+  - no game-thread hitches.
+- **Not required:** byte-identical output with earlier versions. The owner accepts that perf passes change the
+  world's shape slightly, as long as every peer gets the same result and quality holds. (We have tended to treat
+  hash equality as a gate anyway; it's a convenience, not a rule.)
+- **On the shelf, not a speed excuse:** a disk mesh cache is an accepted feature, but perf is judged cold.
+
+## Measurements (owner world, measured on an i9-12900H with 8 workers, headless unless stated)
+
+**Whole view now** (it was 2.6 / 7.2 / 6.0 / 2.7 s a week ago):
+
+| Strate | Whole view |
+|---|---:|
+| SW | 2.4 s |
+| FI | 4.6 s |
+| TN | 4.3 s |
+| VS | 2.5 s |
+
+**In Unreal (SW arrival):**
+- Core work equals headless;
+- initial set ready at 3.74 s vs headless 2.41 s, the extra being scheduling;
+- walkable ring 0.4–1.8 s.
+
+**Where the time goes:**
+- **L73:** field evaluation inside grid fill is about 40 of FI's 46 worker-seconds (TN 33 of 39). LOD0/1 tiles
+  evaluate about 44k density samples each.
+- **L74/L75:** sound whole-tile skip proofs now certify about 22–26% of tile visits.
+  - Ceiling: 46–82% of LOD0–2 tiles are truly uniform, and 90–97% of samples lie in uniform 8³ blocks.
+  - Dominant remaining veto: tiles crossing a strate boundary.
+  - Legacy sub-tile (block) proofs were unsound once (missed passage wall/floor relief), then sound but slower
+    than they saved.
+- **L76, per legacy sample:**
+  - passage/support composer ≈ **1.05 µs**;
+  - primitive scan ≈ 0.19 µs (0.25 primitive distance evaluations per sample, binned);
+  - boundary band ≈ 0.06 µs;
+  - noise ≈ 0.01 µs.
+
+  **About 75% of field time is the passage composer, even far from passages.**
+  - Per-tile passage culling was tried and changed 612 density samples / 24 mesh tiles. It was rejected only for
+    breaking hash equality, which is a convenience, not a rule; nobody checked whether that change was harmless.
+
+**Tried and rejected:**
+- the native FI generator (fails passage walk audits on this plan);
+- deeper Unreal queues (done: 4.78 → 3.74 s).
+
+**Trap we fell into once:** a diagnostic hash mode silently disabled the skips and doubled the timings. Measure the
+production path.
+
+## What to reason about (open; don't limit yourself to these)
+
+1. **Is "evaluate a density function at ~44k points per tile, then march cubes" the right shape** for this world?
+   Consider, for example:
+   - sparse/hierarchical evaluation (octree or brick refinement driven by interval or Lipschitz bounds, as in
+     libfive/Fidget/MPR-style implicit rendering);
+   - reusing samples across nested clipmap LODs;
+   - evaluating smooth large-scale terms coarsely and interpolating;
+   - narrow-band evaluation near the surface only.
+2. **The passages are a few winding tubes.** Why does every sample pay 1 µs for them? What representation would
+   make "far from any passage" free and "near a passage" cheap? For example:
+   - bake each passage once at plan time into a sparse distance/brick structure;
+   - a spatial index of segments with a conservative distance early-out;
+   - a per-tile passage candidate list built once.
+
+   What would a correct per-tile culling need so that it doesn't change the result? And if it changes the result,
+   how should we judge whether that change is acceptable?
+3. **Which work is needed for "ready in 1 s"?** Maybe the target should be redefined: walkable ring first,
+   progressive LOD refinement, far LODs from cheaper representations or impostors, fewer tiles. What do comparable
+   engines do (Voxel Plugin, Teardown, Dreams, No Man's Sky, Minecraft-style streaming, Nanite-era voxel work)?
+4. **Hardware.** 8 CPU cores plus a 7900 XTX that's mostly idle during load. An earlier GPU port was closed, and
+   determinism across GPU vendors is a concern. Is there a deterministic way to use it, e.g. integer/fixed-point
+   evaluation or a CPU-authoritative plus GPU-display split? Is SIMD (AVX2) evaluation of the legacy field
+   realistic?
+5. **Anything in our process or measurement** that hides the real bottleneck.
+
+## How to work efficiently
+
+- **Trust the numbers above; don't re-measure or re-derive them.** Spend your effort on thinking.
+- **Read code only to check whether a specific idea fits.** Entry points:
+  - `CODEMAP.md` (navigation) and `ARCHITECTURE.md` §8.10 (performance invariants);
+  - `Standalone/Core/src/ShapeWorldInternal.h`: composer, `AnalyticDensityAt`, `ClassifyBoxDetailed`, passage
+    terms;
+  - `Standalone/Core/src/VoxelForgeCore.cpp`: tile generation and skips;
+  - reports in `Standalone/Research/WorldAssemblerM3/`: `Linux73`–`Linux76`, `Research36`, and R38–R40 notes
+    inside `Linux73/` and `Linux76/`.
+- **Use the web** for prior art and techniques, and cite them.
+- **Go broad first** (many approaches, one or two lines each), then deep on the best three.
+
+## Output
+
+At most ~2,500 words, plain language, **ranked recommendations first**. For each of the top three:
+- what changes, and where in this codebase (file and function);
+- expected gain, with arithmetic from the numbers above;
+- what it risks: determinism, quality, walkability;
+- effort;
+- **a cheap experiment that would prove it wrong** before anyone builds it fully.
+
+Then the shorter list of other ideas, then any questions only the owner can answer (e.g. what "ready" must mean).
+Mark claims as [CODE] (read in this repo), [MEASURED] (from the numbers above), [PRIOR ART] (cited) or
+[INFERENCE].

Standalone/Research/WorldAssemblerM3/Astra1/REPORT-pass2.md

@@ -0,0 +1,130 @@
+# Astra 1, pass 2 — whole-chain review (gpt-6-astra, effort medium, read-only), 2026-10-27
+
+Claude verified: PackedDensityAt (ShapeWorldInternal.h ~5909) applies ApplyResolvedStrateComposition outside the L76 term scope; FScopedDensityQueryProfile times whole invocations crossing a 256-point boundary (batch-biased).
+
+**Stage-by-stage cost map**
+
+[MEASURED] The L73 stage timings below are historical, before the later skips. They describe where that run spent time; they cannot be subtracted from L76 term timings to produce a current residual. I also inspected the saved L76 results without executing generation.
+
+[CODE] A major architectural detail: the “compiled-analytic” world **already contains precomputed packed signs and quantized surface-distance proxies**. Many lattice queries never enter `AnalyticDensityAt`.
+
+| Stage | Work and frequency | Cost and necessity |
+|---|---|---|
+| **World/plan resolution** | [CODE] Headless loads the owner export, resolves/validates its layout, constructs a snapshot, then constructs `World`. Once per cold run. UE’s serialization entry is [`VoxelForgeCoreAdapter.cpp:2062`](/home/jahni/VoxelM/Plugins/VoxelForge/Source/VoxelForge/Private/VoxelForgeCoreAdapter.cpp:2062); headless startup begins at [`StreamBenchmarkHeadless.cpp:1659`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/StreamBenchmarkHeadless.cpp:1659). | [MEASURED] Saved L76 FI owner-data loading takes about **25 ms**. No complete isolated resolution cost is supplied. [INFERENCE] Necessary, but not a plausible home for worker time measured inside tile-field queries. |
+| **Shape compilation** | [CODE] `World::compile` builds primitives/bins, packed rock intervals, candidate bands, detailed distance proxies, sign-edge repairs, passage validation and far parents. Once for the base shape; additional pages when needed. [`VoxelForgeCore.cpp:1394`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/VoxelForgeCore.cpp:1394), [`ShapeWorldInternal.h:2724`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:2724). | [MEASURED] Saved L76 FI: **313 ms wall**, including approximately 48 ms shapes, 64 ms intervals/signs, 62 ms surface band and 119 ms far parents. [INFERENCE] Important to a one-second cold budget, but separate from the missing tile-field attribution. It already amortizes substantial base-field work. |
+| **Tile-key selection** | [CODE] `desiredTiles` builds clipmap keys, vertical bounds and additional far surface columns. Once initially, then on streaming-set changes; about 2,250 tiles for FI/TN. [`VoxelForgeCore.cpp:1904`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/VoxelForgeCore.cpp:1904). | [INFERENCE] Thousands of key/set operations, not millions of field evaluations. No measured isolated cost. Necessary selection; exact tile count remains a design choice. |
+| **Whole-tile classification** | [CODE] Each assembly tile calls `ClassifyBoxDetailed`, including a one-step halo. It delegates to `ClassifyBoundsDetailed`, with conditional slicing and conservative vetoes. [`VoxelForgeCore.cpp:2377`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/VoxelForgeCore.cpp:2377), [`ShapeWorldInternal.h:6385`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:6385). | [MEASURED] L73: only **4/3 ms total FI/TN**, roughly **2/1 μs per tile**, but ineffective legacy skips then. These are not current classifier costs. [INFERENCE] Necessary only when avoided work pays for it; retain current profitable proofs. |
+| **Density dispatch and base evaluation** | [CODE] Scalar lattice queries probe native/legacy-surface paths, then choose packed lookup or analytic evaluation. Batches have additional fast paths. [`ShapeWorldInternal.h:3475`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:3475), [`:3602`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:3602), [`:5909`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:5909). | [MEASURED] L73’s approximately 52M calls and 39.9/33.2 field worker-seconds imply roughly **0.77/0.64 μs per counted point**, averaged over heterogeneous paths. [INFERENCE] Fetching/evaluating the base value is necessary; repeated dispatch is not inherently necessary. |
+| **Composer** | [CODE] Packed and scalar analytic paths both call `ApplyResolvedStrateComposition`: cavern graph → boundary → passage/support → stamps → compatibility floor caps. [`ShapeWorldInternal.h:1993`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:1993). Frequency depends on the actual route, not just the strate label. | [MEASURED] L76 measures approximately **6.5/5.5 worker-seconds** only within its eligible analytic scopes. [CODE] Its passage/support bucket also includes `ApplyResolvedCavernFloorCaps` at [`:2053`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:2053). [INFERENCE] Composition is necessary where influential; universal invocation is not. |
+| **Grid fill** | [CODE] One cached lattice per generated tile: typically **35³ = 42,875** points at LOD0/1, including halo. Scalar, X8 or Z-run traversal fills it. Storage is thread-local and reused. [`Standalone mesher:430`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/VoxelForge/Private/VoxelMarchingCubesMesher.cpp:430), [`:957`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/VoxelForge/Private/VoxelMarchingCubesMesher.cpp:957), [`:1296`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/VoxelForge/Private/VoxelMarchingCubesMesher.cpp:1296). | [MEASURED] L73: **36.14/29.37 s**, approximately **16.1/13.2 ms per visited tile**, including evaluation. [INFERENCE] Dense fill is avoidable in proven-uniform regions. This is the primary workload, not merely array writes. |
+| **Marching cubes** | [CODE] Classifies cells using cached corners, computes geometry only for surface cells, interpolates edges and deduplicates vertices. LOD0 midpoint correction can issue extra unclamped queries. [`Mesher:1879`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/VoxelForge/Private/VoxelMarchingCubesMesher.cpp:1879), [`:1943`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/VoxelForge/Private/VoxelMarchingCubesMesher.cpp:1943). | [MEASURED] L73 MC aggregate: **40.58/32.63 s**, including grid work. Subtracting grid gives about **4.44/3.26 s**, not another 40 seconds. [INFERENCE] Necessary extraction, but replacing MC is not the first lever. |
+| **Normals** | [CODE] Central differences normally read the existing grid. At Step 1, proxy-band fallback values trigger `DensityAtUnclamped`; optional gradient memoization avoids repeated corner gradients. [`Mesher:1654`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/VoxelForge/Private/VoxelMarchingCubesMesher.cpp:1654). | [MEASURED] L73: **0.306/0.246 s**, about **0.14/0.11 ms per visited tile**. [INFERENCE] Some repeated field queries exist, but six new field evaluations per vertex is not the general path. Normals cannot plausibly explain 30 seconds under these measurements. |
+| **Skirts** | [CODE] Boundary-edge detection, extrusion and density probes prevent unsuitable skirt geometry. Work scales with boundary geometry, not tile volume. [`Mesher:2111`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/VoxelForge/Private/VoxelMarchingCubesMesher.cpp:2111). | [MEASURED] L73: **1.079/1.091 s**, approximately **0.48/0.49 ms per visited tile**. [INFERENCE] Necessary for the current seam solution; bounded opportunity, not the missing dominant cost. |
+| **Ground/cap refinement and far shells** | [CODE] Far stratum/connector repairs and native ground/cap refinement run under eligibility gates, with refinement at LOD≥4 and no overlapping edits. [`VoxelForgeCore.cpp:2792`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/VoxelForgeCore.cpp:2792), [`:2875`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/VoxelForgeCore.cpp:2875). | [MEASURED] L73’s combined “Other,” including these and assembly, is **2.86/2.78 s**. [INFERENCE] Required by the current far representation, but partly corrective work that a better far representation could avoid. Not an explanation for missing grid time. |
+| **Payload** | [CODE] Core assembles material/vertex/index outputs; the headless wrapper converts vertices and moves indices/masks. Per output vertex/index, once per tile. [`VoxelForgeCore.cpp:2969`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/VoxelForgeCore.cpp:2969), [`StreamingWorld.h:934`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/StreamingWorld.h:934). | [MEASURED] The separately timed headless conversion is **12 ms total**, about **5 μs per tile**. [INFERENCE] This does not include all Core assembly or Unreal upload/collision costs. It is not a useful primary target. |
+| **Unreal publication** | [CODE] Worker generation → prepared streams → result queue → budgeted game-thread component/upload/section work → asynchronous collision completion. [`VoxelWorld.cpp:13303`](/home/jahni/VoxelM/Plugins/VoxelForge/Source/VoxelForge/Private/VoxelWorld.cpp:13303), [`:9400`](/home/jahni/VoxelM/Plugins/VoxelForge/Source/VoxelForge/Private/VoxelWorld.cpp:9400), [`:14010`](/home/jahni/VoxelM/Plugins/VoxelForge/Source/VoxelForge/Private/VoxelWorld.cpp:14010), [`:14279`](/home/jahni/VoxelM/Plugins/VoxelForge/Source/VoxelForge/Private/VoxelWorld.cpp:14279). | [MEASURED] SW has **1.33 s additional readiness latency**. [INFERENCE] That is not 1.33 s of CPU publication work. Per-tile apply/cook costs are not established here. Essential to the target, but cannot explain headless field time. |
+
+**Where the “unattributed 30 seconds” most plausibly went**
+
+[CODE] **First: packed-field composition is outside L76’s measurement scope.** The relevant chain is:
+
+`DensityAtLattice` → `PackedDensityAt` → `ApplyResolvedStrateComposition`.
+
+`PackedDensityAt` reads `RockWords`, `CandidateWords` and possibly `SurfaceDistanceQ`, then applies composition. It never enters the `FScopedLegacyFieldTermScope` created later inside `AnalyticDensityAt` at [`ShapeWorldInternal.h:5967`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:5967).
+
+[CODE] Term timers immediately return when that scope is inactive: [`ShapeWorldInternal.h:2275`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:2275). Thus an expensive passage query can be counted by the outer field profiler but entirely absent from L76’s passage timing.
+
+[CODE] `DensityDispatchPathAt` returns “compiled-analytic/FloatingIslands” from the bound generator kind without distinguishing packed from analytic execution: [`ShapeWorldInternal.h:3455`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:3455). That label is insufficient for performance attribution.
+
+[CODE] There are further differences:
+
+- X8 can return packed proxy values directly without invoking the scalar composer; other conditions make it fall back to scalar calls. [`ShapeWorldInternal.h:3675`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:3675)
+- FI LOD0 preferentially uses scalar vertical traversal. [`Mesher:1288`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/VoxelForge/Private/VoxelMarchingCubesMesher.cpp:1288)
+- Z-run dispatch can fall back to scalar lattice queries, including packed queries. Its analytic term scope is reached only after those fallbacks. [`ShapeWorldInternal.h:11460`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:11460)
+- Native/surface branches and non-FI/TN samples are excluded from the legacy-term population.
+
+[INFERENCE] Therefore, the correction establishes that **6.5 seconds is measured passage cost within one subset**, not that total passage cost is only 15%. Packed composition is my leading explanation for substantial uninstrumented work. I cannot assign it 30 seconds from source alone.
+
+[MEASURED] **Second: the residual mixes different generations of the workload.** Existing [L76 saved results](/home/jahni/VoxelM/Plugins/VoxelForge/Saved/Linux/l76/term-profile-before/summary.json) contain:
+
+| Same saved L76 run | FI | TN |
+|---|---:|---:|
+| Density point calls | 26.99M | 25.13M |
+| Eligible legacy points | 6.01M | 5.56M |
+| Reported field estimate | 18.19 worker-s | 15.49 worker-s |
+| Tile-worker total | 33.80 worker-s | 28.56 worker-s |
+| Whole-view wall | 4.621 s | 3.977 s |
+
+[INFERENCE] The approximately 46M unseen calls belong to subtracting L76’s eligible count from L73’s pre-skip population. They are not an established current population. Likewise, `40−measured_terms` is not a coherent current residual.
+
+[CODE] **Third: the aggregate field estimator can be biased by batching.** `FScopedDensityQueryProfile` samples when the point sequence crosses a multiple of 256, timing the entire invocation and recording its point count. The reducer pools sampled time/points and scales by all points. See [`ShapeWorldInternal.h:2355`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:2355) and [`StreamBenchmarkPipeline.h:5611`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Source/StreamBenchmarkPipeline.h:5611).
+
+[INFERENCE] A batch of eight has approximately eight times a scalar invocation’s chance of being selected, and contributes eight sampled points when selected. Pooling both without inclusion-probability correction overrepresents batch points. If packed batches are cheap and scalar composition is expensive, the estimate can substantially understate field time. Periodic sampling also risks correlation with spatial traversal.
+
+[MEASURED] This deserves attention: L76 FI LOD0 records **12.70 s grid fill but only 5.96 s estimated field evaluation**. Conversely, LOD3 estimates **3.04 s field time against 2.58 s total tile-worker time**. Those are diagnostic inconsistencies, not proof of where the discrepancy lies. [Saved log](/home/jahni/VoxelM/Plugins/VoxelForge/Saved/Linux/l76/term-profile-before/strate1-w8.log:12880)
+
+[INFERENCE] **Lower-ranked explanations:**
+
+- **Dispatch/lookups:** real repeated work. Stratum lookup uses binary search and coordinate conversion, sometimes repeatedly per sample: [`ShapeWorldInternal.h:437`](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:437). But attributing 30 seconds to this alone means roughly **0.65 μs per purported 46M calls**. That needs evidence; hidden composer execution is more concrete.
+- **Allocation/cache misses:** possible contributors, but grid allocation is reused and packed access is direct indexing. There is no evidence of one heap allocation per ordinary density point.
+- **Halos/neighbor duplication:** significant but bounded. `35³−33³ = 6,938`, or **16.2%** of a dense tile’s samples, is the gradient halo. Including shared faces, an ideal large same-LOD region could reduce `35³` toward `32³` unique samples per tile: approximately **23.6%** savings before edges and synchronization. This multiplies existing evaluation cost; it does not create a separate unmeasured stage.
+- **Normals/midpoints/skirts:** issue additional calls, but their measured stage budgets exclude them as the dominant explanation. Cross-LOD duplication remains unquantified.
+
+**Cheapest decisive measurement**
+
+[INFERENCE] First take a sampling call-stack profile of the clean production run, focused on grid fill. It requires no new per-sample timers and should immediately distinguish packed composition from dispatch or memory stalls.
+
+[INFERENCE] The next instrumentation change should be a **mutually exclusive dispatch census**, not another individual-term profiler. Count and sample time for packed-scalar, packed-X8, analytic-scalar, analytic-batch, native and legacy-surface routes, split by LOD and caller stage. Measure composition inside packed-scalar explicitly.
+
+Use equal-probability invocation sampling with correct expansion, or stratify by route **and batch length**. Avoid nested double-counting; compare the resulting total against directly timed grid fill. Separate passage carving from compatibility floor caps.
+
+[INFERENCE] This falsifies my leading explanation if packed-scalar composition occupies little time. Only then prioritize dispatch, cache misses or other overhead.
+
+**Revised ranked recommendations**
+
+**1. Establish complete attribution, then specialize the dominant lattice route.**
+
+[INFERENCE] This replaces my unconditional “passages first” ranking. The first implementation round should produce a closed cost account and identify which route dominates LOD0/1.
+
+If packed composition dominates, give each tile/brick a stable local composition program and an identity fast path. Extend `FScopedPassageTileQueries`, `PackedDensityAt` and `ApplyResolvedStrateComposition`. Hoist Z-only dispatch decisions into plane/run contexts. Before copying the X8 shortcut into scalar traversal, establish why their composition behavior differs and which semantics are required.
+
+[INFERENCE] Effort: small for attribution, medium for specialization. Risks: incorrect support envelopes, changed composition order, scalar/batch disagreement. Preserve peer determinism and audit clearance, support and grade; old-version hashes remain an exactness diagnostic.
+
+[MEASURED → INFERENCE] **Corrected passage arithmetic:** using your historical budget strictly as an illustration:
+
+- FI, removing 80–90% of **6.5/46** worker-seconds: `4.6 × (1−0.8…0.9 × 6.5/46)` = **4.08–4.02 s**.
+- TN, removing 80–90% of **5.5/39**: approximately **3.81–3.75 s**.
+
+These replace my erroneous approximately two-second estimates. They are not forecasts because the operands span rounds. Using the contemporaneous saved L76 totals instead gives approximately **3.91–3.83 s FI**, **3.37–3.29 s TN**, under proportional scaling.
+
+[INFERENCE] Total passage savings could be larger if the missing packed-route work is substantial. Measure it before assigning a percentage.
+
+**2. Remove repeated composed sampling; retain MC.**
+
+[INFERENCE] Keep the retained-proof/local-program recommendation, but build on the existing packed representation. Priorities:
+
+- Retain successful slice/brick proofs rather than requiring a uniform whole-tile verdict.
+- Reuse final composed lattice samples across neighboring tiles where inputs and semantics match.
+- Evaluate exact surface endpoints and normal stencils; leave certified interiors implicit.
+
+The relevant changes remain `ClassifyBoundsDetailed`, `World::generateTile` and the standalone mesher’s grid fill. Sample-cache keys must include evaluator version, edits and relevant resolution/context—not coordinates alone.
+
+[INFERENCE] An alternative worth testing is applying composition once to a shared near-region lattice. Count its cold construction cost: moving the same work earlier is not a speedup. It wins through deduplication, localization or cheaper batching.
+
+[INFERENCE] Effort: medium-to-large. Risks: stale edit dependencies, seams and false uniform proofs. Cheap falsifier: one representative region spanning adjacent tiles and a strate boundary; compare total construction plus meshing cost against independent tiles.
+
+[INFERENCE] Withdraw the earlier combined one-second projection. At unchanged throughput, FI’s current 4.6 seconds requires approximately **78% critical-path reduction**. Border sharing alone cannot supply that; broad sampling elimination still has to prove its economics.
+
+**3. Preserve a separate arrival deadline and reduce end-to-end latency.**
+
+[INFERENCE] Keep dependency-aware scheduling through collision publication, rather than merely increasing queue depth. The existing near-priority and hot-swap mechanisms already provide the foundation.
+
+Shape compilation’s approximately 0.31 seconds matters once generation approaches one second. Far repair/refinement becomes material too. Optimize these after the dominant grid route is understood; do not hide their cost outside the cold timer.
+
+[MEASURED → INFERENCE] SW’s scheduling gap remains a possible **0–1.33-second** latency opportunity, not a guaranteed CPU saving. Scheduling cannot remove required whole-view work.
+
+[INFERENCE] Effort: medium. Risks: starving far coverage or publishing visuals before safe collision. Cheap falsifier: an arrival-only admission experiment plus prerequisite/publication tracing. If its uncontended critical path exceeds one second, scheduling alone cannot meet arrival readiness.
+
+[INFERENCE] GPU porting, SIMD, native-generator replacement and a new mesher stay below these three. The newly visible distinction is between **cheap cached base density and potentially expensive repeated composition**, not simply “52M analytic evaluations.”
+
+Read-only inspection completed; no edits, builds, tests, commits or stashes.

Standalone/Research/WorldAssemblerM3/Astra1/REPORT.md

@@ -0,0 +1,137 @@
+# Astra 1 — design review (gpt-6-astra, effort low, read-only), 2026-10-27
+
+Brief: see BRIEF.md. Note from Claude: the brief's "~75% of field time is the passage composer" was WRONG — L76's term profiler covered ~6.0M of ~52M density calls per view (FI); measured passage cost is ~6.5 of ~40 worker-s (~15%). Astra flagged the scope mismatch itself. Its gain arithmetic in rec. 1 inherits the wrong share.
+
+**[INFERENCE] Ranked recommendations:**
+
+1. **Compile passages into spatially local operations.** Make most samples bypass the composer entirely; simplify the remaining work.
+2. **Replace repeated block classification with a retained hierarchy of proofs and local field programs.** Keep marching cubes; stop densely evaluating regions that cannot produce geometry.
+3. **Give arrival readiness its own deadline-driven pipeline.** Preserve whole-view completion as a separate benchmark; scheduling improvements alone cannot meet it.
+
+**[INFERENCE]** These are complementary. Passage localization is the strongest first investment, but does not plausibly deliver one second alone. A wholesale mesher replacement, GPU rewrite, or native-generator migration is premature.
+
+### 1. Make passage influence local by construction
+
+**[CODE]** There is already a spatial index: `BuildPassageFeatureTileList` queries passage feature bounds. `FScopedPassageTileQueries` turns route candidates into per-passage flags, while retaining segment lists for mouth support. Nevertheless, `ApplyResolvedStratePassageCarves` still iterates all passages and scans crossings. After finding a route distance, it calculates relief and mouth-related terms. See [ShapeWorldInternal.h](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:989).
+
+**[INFERENCE] What changes:** compile a small, immutable passage program for each spatial region:
+
+- Empty region: no passage invocation.
+- Route region: ordered candidate segments, precomputed geometry and distances along the route.
+- Mouth/support region: explicit support, transition-fade and later-bore dependencies.
+- Overlapping features: retain the original composition order.
+
+Use `BuildPassageComposerConstants`, `BuildPassageFeatureTileList`, `FScopedPassageTileQueries`, and `ApplyResolvedStratePassageCarves`; connect the result through `World::generateTile` in [VoxelForgeCore.cpp](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/VoxelForgeCore.cpp:1997). This is stronger than filtering one loop: the region program should remove entire categories of work.
+
+**[INFERENCE] Exact culling requires an identity proof**, not merely “the tube does not intersect this tile.” For every omitted operation, prove that it leaves the incoming density unchanged over the query domain. Include:
+
+- Spline extrema, variable radius, wall/floor relief and smooth-blend reach.
+- Mouth shaping, support treads, columns, boundary fade and dependencies on other passages.
+- All sample positions used by normals, borders and skirts.
+- Deterministic ordering and tie-breaking among retained features.
+
+A feature can leave density signs unchanged while altering marching-cubes interpolation or normals. Conversely, changing far-away density magnitudes may be harmless. These are different correctness claims.
+
+**[CODE]** L75 already corrected bounds for passage relief and spline extrema. The composer also conditionally restores support and defers support composition. Therefore, baking one distance to the nearest tube would not reproduce its semantics. [L75 report](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Research/WorldAssemblerM3/Linux75/REPORT.md:22)
+
+**[INFERENCE]** If exact influence is awkward or effectively nonlocal, introduce a versioned, compact-support passage operator: identical in the protected walkable corridor and mouth regions, smoothly becoming identity outside an explicit envelope. That is a legitimate world-generation change under your constraints.
+
+**[MEASURED → INFERENCE] Expected gain:** passage work is approximately `0.75 × 40 = 30` of FI’s 46 worker-seconds, and `0.75 × 33 = 24.75` of TN’s 39. Removing 80–90% gives proportional wall-time scenarios:
+
+| View | 80% passage reduction | 90% passage reduction |
+|---|---:|---:|
+| FI | `4.6 × (46−24)/46 = 2.20 s` | `4.6 × (46−27)/46 = 1.90 s` |
+| TN | `4.3 × (39−19.8)/39 = 2.12 s` | `4.3 × (39−22.275)/39 = 1.84 s` |
+
+These assume critical-path time follows work reduction; they are not predictions for the Ryzen. Even eliminating passage cost entirely leaves approximately **1.6 seconds** in both views.
+
+**[INFERENCE] Risks and effort:** medium effort for regional programs; larger for a new passage representation. Stable candidate ordering and versioned arithmetic protect determinism. Underestimated envelopes threaten clearance and support; overly generous envelopes merely lose speed. Run capsule, grade and support audits across entire passages, including landings and seams.
+
+**[INFERENCE] Cheap falsifier:** resurrect the rejected culling candidate as an experiment. First inspect all 612 changed samples and 24 changed mesh tiles: location, zero crossings, surface displacement, normals, support and audit outcomes. Then time the production path including candidate construction. Reject this implementation if conservative lists remain large or composer savings are small. Hash differences alone are neither acceptance nor rejection.
+
+### 2. Retain spatial proofs and simplify the field inside each region
+
+**[INFERENCE]** A continuous density function remains a good world definition. Evaluating its complete program at every lattice point is the questionable implementation. Marching cubes is not currently the dominant problem.
+
+**[CODE]** `ClassifyBoxDetailed` delegates to `ClassifyBoundsDetailed`. The latter already performs conditional strate slicing, but combines slices into a whole-box verdict and abandons the skip when a slice is unknown or has a different sign. L75’s legacy block certificates became audit-only after timing regressions. Simply enabling more block checks repeats a failed approach. [Classifier](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Core/src/ShapeWorldInternal.h:6385), [L75 final disposition](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Research/WorldAssemblerM3/Linux75/REPORT.md:64)
+
+**[INFERENCE] What changes:** introduce a compact region tree or brick table whose entries retain:
+
+- A solid/air certificate, or an unresolved range.
+- Relevant primitive and passage candidates.
+- Terms proven inactive or dominated.
+- Child regions requiring further evaluation.
+
+Split first at known strate and transition-band boundaries, then refine unresolved regions spatially. Keep successful proofs even if a neighboring slice fails. Share candidate filtering and bounds down the hierarchy; do not repeatedly invoke the full classifier from scratch.
+
+Start tile-local and retain the regular marching-cubes lattice. Extend `ClassifyBoundsDetailed`, the evaluation feeding `AnalyticDensityAt`, `World::generateTile`, and the grid/proof path in `UVoxelMarchingCubesMesher::GenerateMesh` in [VoxelMarchingCubesMesher.cpp](/home/jahni/VoxelM/Plugins/VoxelForge/Source/VoxelForge/Private/VoxelMarchingCubesMesher.cpp:102).
+
+**[PRIOR ART]** Fidget combines interval evaluation with regional expression simplification: even unresolved regions can use shorter programs. That second benefit matters here as much as empty-space skipping. It also supports bulk SIMD evaluation. [Fidget’s author documentation](https://www.mattkeeter.com/projects/fidget/)
+
+**[INFERENCE]** Do not assume the composed density is a signed distance field with Lipschitz constant one. Warps, blends and relief require their actual bounds. Uniform corners do not prove a uniform interior.
+
+Similarly, do not fill certified interiors with arbitrary constants and then use those constants at surface edges or in normal stencils. Evaluate the exact endpoint and halo values wherever geometry or gradients consume them. A narrow band must be *discovered conservatively*, not guessed from sparse signs.
+
+**[MEASURED → INFERENCE] Expected gain:** the 90–97% uniform-block sample census is an opportunity ceiling, not a realizable skip rate. A useful experiment target is **50–70% reduction of remaining field work, net of classification cost**.
+
+After a 90% passage reduction, FI has approximately 13 field-work units plus 6 others. Reducing those 13 by 50–70% gives:
+
+`4.6 × [6 + 13 × (0.5 to 0.3)] / 46 = 1.25 to 0.99 s`.
+
+TN similarly gives approximately **1.25–1.02 seconds**. Thus the combination approaches the headless target, with little budget left for Unreal overhead. Do not multiply independent headline speedups: both techniques remove overlapping work.
+
+**[INFERENCE] Risks and effort:** medium-to-large effort, substantially less than adaptive meshing with new topology. Incorrect proofs can silently delete geometry; edits must invalidate affected certificates, including their dependency halos. Quality and walkability can remain unchanged if surface samples and stencils remain exact. Unknown bounds must fall back.
+
+**[INFERENCE] Cheap falsifier:** implement one tile-local hierarchy for representative boundary-crossing and passage-adjacent tiles, retaining the existing mesher. Compare total classification-plus-fill cost against dense evaluation, after passage localization. Reject expansion if net field savings fall well below 50%, or bookkeeping and conservative halos consume the benefit. The prior slow block experiment makes this an essential early gate.
+
+### 3. Schedule for an explicit arrival deadline
+
+**[MEASURED]** SW’s Unreal overhead is `3.74−2.41 = 1.33 s`; walkable readiness ranges from 0.4 to 1.8 seconds.
+
+**[INFERENCE]** Keep two separate commitments:
+
+- **Arrival ready:** safe collision and sufficient visible terrain for immediate movement.
+- **Whole view complete:** the full requested set at final quality.
+
+If the owner insists both happen within one second, say so explicitly. Progressive refinement cannot be counted as meeting the second commitment.
+
+**[CODE]** §8.10 already specifies occupied/support-tile priority, heading priority, dynamic near reserve, independent region admission, cancellation, bounded result backlog and hot-swap. “Make nearby tiles higher priority” is therefore not a new recommendation. [Performance invariants](/home/jahni/VoxelM/Plugins/VoxelForge/ARCHITECTURE.md:572)
+
+**[INFERENCE] What changes:** make readiness a dependency graph with deadlines: required region compilation → field/mesh → collision preparation → bounded publication. Prioritize prerequisites of the arrival set, not just its tile jobs. Reserve capacity through publication, and schedule travel-ahead work by time-to-arrival.
+
+Inspect and change `AVoxelWorld::UpdateChunksAroundPosition`, `LoadTile`, and `ProcessPendingChunks` in [VoxelWorld.cpp](/home/jahni/VoxelM/Plugins/VoxelForge/Source/VoxelForge/Private/VoxelWorld.cpp:9400). Preserve the existing epoch, cancellation and collision-handoff rules. Refinement should retain covering geometry until replacements are ready.
+
+**[PRIOR ART]** Voxel Plugin separates collision/navmesh demand through invokers. Geometry clipmaps use incremental updates, coarse-to-fine processing and continuity between levels. These support separate readiness domains, not a universal one-second guarantee. [Voxel Plugin](https://docs.voxelplugin.com/2.0p6/knowledgebase/blueprints/collision-navmesh-and-invokers), [Geometry clipmaps](https://developer.nvidia.com/gpugems/gpugems2/part-i-geometric-complexity/chapter-2-terrain-rendering-using-gpu-based-geometry)
+
+**[MEASURED → INFERENCE] Expected gain:** removing half the observed scheduling gap saves about **0.67 seconds**; removing all of it still leaves SW at 2.41 seconds before Core changes. Improving a 1.8-second walkable arrival to one second requires eliminating or deferring 0.8 seconds from that critical path.
+
+**[INFERENCE] Risks and effort:** small-to-medium for dependency scheduling; larger for new far representations. Timing must never change generation inputs. Coarse collision can violate walkability; coarse visuals can pop, particularly in VR. Preserve authoritative near collision and accept temporary visual substitutes only if they satisfy the owner’s quality criterion.
+
+**[INFERENCE] Cheap falsifier:** first replay existing job timings against the dependency graph, then try an arrival-only admission experiment. If prerequisites plus bounded publication already exceed one second without competing work, scheduling cannot solve arrival latency. If the coarse cover visibly degrades the arrival, it cannot redefine “ready.”
+
+**Other approaches, in priority order**
+
+- **[INFERENCE] Bake passage geometry, not necessarily final density.** Precompute spline coefficients, arc lengths, frames and conservative segment bounds first. Sparse sampled bricks are a later option; retain separate carve/support operands and conditions. Count baking in cold latency. Interpolated distance alone can erase treads or alter mouths.
+- **[INFERENCE] SIMD after localization.** AVX2 evaluation of batches sharing a local program is realistic; divergent all-passage loops are a poor starting point. Eight lanes do not imply eightfold speedup. Specify arithmetic and reduction order across scalar/vector paths.
+- **[INFERENCE] Sample sharing.** Share same-LOD borders first; cross-LOD reuse requires identical coordinates *and field semantics*. Nested lattices overlap, but clipmap shells need not cover the same volume. Compare synchronization cost against duplicate evaluation before building a global cache.
+- **[INFERENCE] Coarse smooth terms.** Interpolate bounded macro terms while evaluating fine relief near surfaces. Density error does not imply equal position error where gradients are weak. L76’s 0.01-µs noise row is too small to justify making noise approximation the main project.
+- **[INFERENCE] GPU.** A specified integer/fixed-point evaluator can be deterministic: define rounding, overflow, square roots, interpolation and stable emission order. Quantizing floating-point results afterward is insufficient. CPU-authoritative collision plus GPU display is easier, provided visual disagreement is bounded and display results never affect gameplay. GPU readbacks and VR contention can erase gains.
+- **[PRIOR ART → INFERENCE]** HLSL `precise` controls arithmetic refactoring; it is not a complete cross-vendor world-generation specification. Prototype one bounded integer passage kernel before reopening a full port. [Microsoft documentation](https://learn.microsoft.com/en-us/windows/win32/direct3dhlsl/precise)
+- **[PRIOR ART → INFERENCE] Alternative renderers.** Dreams’ published architecture evaluates CSG into multiresolution point clouds; Teardown uses a voxel renderer without polygons. These demonstrate representation choices, not transferable cold-generation timings. Nanite addresses rendering downstream of field generation. [Dreams presentation](https://www.advances.realtimerendering.com/s2015/index.html), [Teardown FAQ](https://www.teardowngame.com/faq.html)
+- **[PRIOR ART → INFERENCE] Continuous streaming.** No Man’s Sky’s architecture is explicitly organized around continuous generation. That supports travel-ahead planning, but does not prove cold teleport latency. Disk caching likewise remains useful without counting toward this target. [Hello Games’ GDC talk](https://www.youtube.com/watch?v=sCRzxEEcO2Y)
+
+**Process changes that matter**
+
+**[INFERENCE]** Separate three gates: peer determinism for the *new version*; gameplay/visual acceptance against the previous version; and performance on the production path. Old-version hash identity should only gate changes advertised as exact.
+
+**[CODE]** L76’s term profiler covers selected legacy evaluations; its passage total is about 6.3 worker-seconds, whereas L73 reports broader grid-field totals. Those scopes must not be silently equated. The arithmetic above uses your supplied aggregate attribution as a scenario, not reconciled absolute profiling data. [L76 profiler scope](/home/jahni/VoxelM/Plugins/VoxelForge/Standalone/Research/WorldAssemblerM3/Linux76/REPORT.md:5)
+
+**[INFERENCE]** Report cold-start boundaries, critical-path stages, worker occupancy, publication latency and worst frame time alongside whole-view time. Include plan compilation and fresh in-memory structures. Validate the winning prototype on the 5800X3D; no reliable conversion follows from the laptop measurements alone.
+
+**Questions only the owner can settle**
+
+- Must every final-quality tile exist at one second, or can safe arrival precede complete refinement?
+- What travel speed, teleport distance and VR frame budget must streaming sustain?
+- Does “cold” include world planning, and must supported peers reproduce density bits, mesh bits, or an explicitly defined gameplay representation?
+
+Read-only review completed; no edits, builds, tests, commits or stashes.

Standalone/Research/WorldAssemblerM3/Linux29/REPORT.md

@@ -0,0 +1,110 @@
+# World Assembler L29 — bedrock/ceiling transitions
+
+**Core now honors the upper strate's `EVoxelStrateTransition` at the shared interface.** The owner
+world's upper two-chunk Gradient resolves to 16 m at the 8 m layout chunk size. SurfaceWorld's
+one-chunk setting remains in the resolved strate record. Core does not blend unrelated generator
+parameters. `WorldAssemblyEvaluatorVersion` is 15; recipe versions and resolved-layout schema V3
+are unchanged.
+
+## Appearance and safety
+
+| Mode | Result |
+|---|---|
+| Hard | The original flat, touching boundary. No displacement or overlap. |
+| Gradient | Both faces follow one smooth 2D hash surface. On the 16 m interface, the measured peak-to-peak undulation is 3.988 m. |
+| Interleaved | A deterministic 3D domain-warped hash field moves both faces inward, producing fingered overlap. Measured peak crossing was 6.487 m in FloatingIslands and 6.952 m in SurfaceWorld, within the declared 16 m. |
+
+Each boundary band keeps at least **two Core voxels** of solid thickness: 0.5 m at the default
+25 cm voxel size. The owner bands measured 0.5–1.0 m on the upper side and 6.25 m on the lower
+side. Interleaved is capped by both the declared width and the bands' combined thickness, so the
+solid intervals still touch or overlap.
+
+The strict interface audit covers a 512 m square: 4,221 columns per interface, with four passage
+columns excluded from the hole sweep. Hard, Gradient and Interleaved each report zero hole columns
+and zero air samples. Both negative controls reject as expected: crossing one micrometre wider than
+declared, and either band one micrometre thinner than the minimum. All six recipe/mode runs pass.
+
+Transition faces return to the nominal seam near passage mouths: the protected radius is the mouth
+radius plus 1 m, followed by a 2 m smooth fade. This kept the style-2 FI landing supported; its
+final capsule/support audit passes.
+
+## Passage and parity audits
+
+The final matrix has 4 styles × 2 recipes × 2 compilers (16 runs). Capsule and walkability,
+open-air, naturalness, no-long-bridge, route bindings, strict-validator controls, L13 route parity,
+and L9 proof audits pass. Open-air reports zero violations; validator controls reject 10/10;
+route-parity and proof audits report zero mismatches/violations. The L23/L24/L26 negative controls
+are detected.
+
+The L28 `FloorProfileBlend` diagnostic still exceeds its 2-voxel threshold in styles 1 and 3:
+2.544 and 3.645 voxels. L28 records the same values on both compilers, so this is inherited and
+unchanged.
+
+## Hashes
+
+The L25 W1/W8/W12 hash matrix is identical across Clang and GCC for both recipes: full-detail,
+whole-view, all LOD rows and exact-query hashes match. Hash order below is density / mesh / payload /
+topology.
+
+| Recipe | Full detail (960 tiles) | Whole view (2,370 tiles) | Exact-query density / detail / collision |
+|---|---|---|---|
+| SurfaceWorld | `ace56c8f205238ad / a9c603a1248de6b8 / ea55f1f4fcc6a894 / 5ea7bc78a1b678ae` | `0e8c5af01df96b14 / 70099e89b77811ed / dbce0fdcf6764126 / ddaf81a1228f9b4b` | `c949c4df2ce6f9d9 / 114c501e2d830d94 / e6011d3a248d4849` |
+| FloatingIslands | `ed550e0c8b182695 / 0e410a8e80a3e7f7 / 0751926f0c67d8a4 / f01208bc2f7841ec` | `a492eefa4f534975 / 141f00f3e411a0df / 93f50c569526c5cb / d83b53c8e53df81c` | `7b7c50ac24ccadcc / efcba20c0c70c415 / e604823a249029bf` |
+
+The 24 m moving crossing processed 314 entering tiles per recipe; Clang/GCC crossing hashes match.
+SurfaceWorld's away-from-interface probe at z = −400 m also matches L28: all 960 full-detail
+tiles and the exact-query density/detail/collision hashes are identical. The broader whole-view
+hash differs because its far-LOD coverage also includes the changed interface.
+
+## Cost
+
+Five clean, alternating W12 pairs against
+`Saved/Linux/bin/VoxelForgeCoreHeadless-linux28-clang-r28`, hashing off:
+
+| Recipe | L28 whole-view ready | L29 whole-view ready | Change |
+|---|---:|---:|---:|
+| SurfaceWorld | 1.581 s | 1.644 s | +3.97% |
+| FloatingIslands | 16.605 s | 16.814 s | +1.26% |
+
+FloatingIslands is within the ~3% target. SurfaceWorld is about one percentage point above it.
+
+## Captures
+
+All are 1280×720 JPEGs, each under 21 KB (well below 300 KB):
+
+- `captures/fi-floor-gradient-above.jpg` — FI floor from above, inside FI.
+- `captures/sw-ceiling-gradient-below.jpg` — SW ceiling from below, inside SW.
+- `captures/interface-hard-side-cutaway.jpg`
+- `captures/interface-gradient-side-cutaway.jpg`
+- `captures/interface-interleaved-side-cutaway.jpg`
+
+## Changes and run history
+
+Core transition evaluation/validation and the shared composition path changed, along with the
+headless transition audit, architecture/codemap, and the two Unreal files
+`Source/VoxelForge/Public/VoxelStrateTypes.h` and
+`Source/VoxelForge/Private/VoxelForgeCoreAdapter.cpp`. Unreal was unavailable here, so those edits
+were not compiled. No commit, push or stash was made.
+
+Failed or retried runs:
+
+- An early Clang build used a nonexistent dispatch helper; corrected to the current query method and rebuilt with Clang and GCC.
+- The first Interleaved overlap used the full sum of band thicknesses and opened gaps (1,085 columns / 20,313 air samples). Capping overlap to `min(declared width, combined thickness)` removed the gaps.
+- An initial hole sweep sampled a half-open band edge and reported 752 boundary-rounding holes. Sampling half a voxel inside each band removed those edge artifacts; final sweeps report zero holes.
+- The first FI style-2 passage audit had 11 unsupported probes after Gradient moved the mouth face. The local mouth taper fixed it; all 16 final passage runs pass.
+- A resolved-layout-only command initially omitted required pipeline flags and exited 2; rerun with the required flags passed. Early cutaway camera/clip settings produced blank framing; the final orientation and clip plane produced the captures above.
+- One cost folder contained a duplicated timing sequence and was discarded. The five-pair clean run above was sequential. A cache experiment did not improve cost and was removed. A cost-extraction `sed` typo was rerun with Python; benchmark logs were unaffected.
+
+No build or audit exceeded 30 minutes, and no step remained stuck for 15 minutes. All builds and runs
+used CPUs 0–11, at most 12 workers, normal priority, and the 6 GiB address-space cap.
+
+## Orchestrator review (Claude)
+
+- Merged: transitions honoured safely (0 holes over 4,221 columns per interface, negative controls reject, all
+  passage audits pass, deterministic).
+- **The look is not verified by the captures:** `interface-interleaved-side-cutaway.jpg` shows flat faces
+  (black = uncapped solid between faces), with no visible fingers; `sw-ceiling-gradient-below.jpg` is a flat
+  plane; `fi-floor-gradient-above.jpg` shows **concentric dashed rings** on the FI floor, which looks like an
+  artifact (possibly the passage-mouth protected-radius fade, or quantised undulation), not a smooth Gradient.
+- Cumulative SW cost vs L24 is now ~+8% (L28 +3.7% plus L29 +4%). L30 covers the ring artifact, readable
+  transition captures, and cost recovery.

Standalone/Research/WorldAssemblerM3/Linux30/MeasureRing.py

@@ -0,0 +1,239 @@
+#!/usr/bin/env python3
+"""Rasterize upward mesh triangles into a top-down field height map."""
+import argparse
+import array
+import json
+import math
+import struct
+import sys
+
+Q16 = 1 << 16
+MASK64 = (1 << 64) - 1
+
+
+def trunc_div(numerator, denominator):
+    return numerator // denominator if numerator >= 0 else -((-numerator) // denominator)
+
+
+def transition_hash(seed, interface, x, y, z, salt):
+    value = 14695981039346656037
+    for word in (seed & 0xffffffff, interface & 0xffffffff,
+                 x & MASK64, y & MASK64, z & MASK64, salt):
+        for byte in range(8):
+            value ^= (word >> (byte * 8)) & 0xff
+            value = (value * 1099511628211) & MASK64
+    value ^= value >> 30
+    value = (value * 0xbf58476d1ce4e5b9) & MASK64
+    value ^= value >> 27
+    value = (value * 0x94d049bb133111eb) & MASK64
+    value ^= value >> 31
+    return ((value >> 32) >> 15) - Q16
+
+
+def transition_fade(value):
+    value = max(0, min(Q16, value))
+    square = value * value // Q16
+    return square * (3 * Q16 - 2 * value) // Q16
+
+
+def gradient_height_um(layout, x_um, y_um):
+    upper = next(item for item in layout["strates"] if item["order"] == 0)
+    lower = next(item for item in layout["strates"] if item["order"] == 1)
+    width = upper["transition_width_um"]
+    cell = max(1_000_000, layout["strate_layout_chunk_size_um"] * 4)
+    ix = x_um // cell
+    iy = y_um // cell
+    tx = transition_fade(((x_um - ix * cell) * Q16) // cell)
+    ty = transition_fade(((y_um - iy * cell) * Q16) // cell)
+
+    def at(dx, dy):
+        noise = transition_hash(0, upper["strate_index"], ix + dx, iy + dy, 0,
+                                0x47524144)
+        return noise
+
+    def lerp(a, b, t):
+        return a + trunc_div((b - a) * t, Q16)
+
+    low = lerp(lerp(at(0, 0), at(1, 0), tx),
+               lerp(at(0, 1), at(1, 1), tx), ty)
+    displacement = trunc_div(low * (width // 8), Q16)
+    seam = upper["bedrock"]["bottom_um"]
+    thickness = upper["bedrock"]["top_um"] - seam
+    return seam + displacement + thickness
+
+
+def read_scene(path):
+    triangles = []
+    with open(path, "rb") as stream:
+        if stream.read(8) != b"VFMSH001":
+            raise SystemExit(f"{path}: invalid scene header")
+        version, voxel_um, count = struct.unpack("<3I", stream.read(12))
+        stream.read(40)
+        if version != 1 or count > 100000:
+            raise SystemExit("unsupported scene")
+        for _ in range(count):
+            key = struct.unpack("<4i", stream.read(16))
+            surface_vertices, skirt_count, vertex_count, index_count, mask_count = struct.unpack(
+                "<5I", stream.read(20))
+            positions = array.array("f")
+            positions.frombytes(stream.read(vertex_count * 12))
+            normals = array.array("f")
+            normals.frombytes(stream.read(vertex_count * 12))
+            indices = array.array("I")
+            indices.frombytes(stream.read(index_count * 4))
+            masks = stream.read(mask_count)
+            if sys.byteorder != "little":
+                positions.byteswap()
+                normals.byteswap()
+                indices.byteswap()
+            for index in range(0, index_count, 3):
+                if masks and masks[index // 3]:
+                    continue
+                a, b, c = indices[index:index + 3]
+                if max(a, b, c) >= surface_vertices:
+                    continue
+                nz = (normals[a * 3 + 2] + normals[b * 3 + 2]
+                      + normals[c * 3 + 2]) / 3.0
+                if nz < 0.35:
+                    continue
+                vertices = tuple((positions[v * 3], positions[v * 3 + 1],
+                                  positions[v * 3 + 2]) for v in (a, b, c))
+                triangles.append(vertices)
+    return voxel_um, triangles
+
+
+def rasterize(triangles, bounds, width, height):
+    x0, x1, y0, y1 = bounds
+    values = [None] * (width * height)
+    sx, sy = width / (x1 - x0), height / (y1 - y0)
+    for tri in triangles:
+        (ax, ay, az), (bx, by, bz), (cx, cy, cz) = tri
+        den = (by - cy) * (ax - cx) + (cx - bx) * (ay - cy)
+        if abs(den) < 1.0e-12:
+            continue
+        left = max(0, int(math.floor((min(ax, bx, cx) - x0) * sx)))
+        right = min(width - 1, int(math.ceil((max(ax, bx, cx) - x0) * sx)))
+        top = max(0, int(math.floor((y1 - max(ay, by, cy)) * sy)))
+        bottom = min(height - 1, int(math.ceil((y1 - min(ay, by, cy)) * sy)))
+        for py in range(top, bottom + 1):
+            y = y1 - (py + 0.5) / sy
+            row = py * width
+            for px in range(left, right + 1):
+                x = x0 + (px + 0.5) / sx
+                u = ((by - cy) * (x - cx) + (cx - bx) * (y - cy)) / den
+                v = ((cy - ay) * (x - cx) + (ax - cx) * (y - cy)) / den
+                w = 1.0 - u - v
+                if min(u, v, w) < -1.0e-6:
+                    continue
+                z = u * az + v * bz + w * cz
+                idx = row + px
+                if values[idx] is None or z > values[idx]:
+                    values[idx] = z
+    return values
+
+
+def main():
+    parser = argparse.ArgumentParser()
+    parser.add_argument("scene")
+    parser.add_argument("output_ppm")
+    parser.add_argument("--bounds", nargs=4, type=float, required=True,
+                        metavar=("XMIN", "XMAX", "YMIN", "YMAX"))
+    parser.add_argument("--size", nargs=2, type=int, default=(640, 640))
+    parser.add_argument("--range", nargs=2, type=float, default=(-122.0, -118.0),
+                        metavar=("ZMIN", "ZMAX"))
+    parser.add_argument("--ring-center", nargs=2, type=float,
+                        metavar=("X", "Y"))
+    parser.add_argument("--layout")
+    args = parser.parse_args()
+    voxel_um, triangles = read_scene(args.scene)
+    width, height = args.size
+    sx, sy = width / (args.bounds[1] - args.bounds[0]), height / (args.bounds[3] - args.bounds[2])
+    values = rasterize(triangles, args.bounds, width, height)
+    finite = sorted(value for value in values if value is not None)
+    if not finite:
+        raise SystemExit("no upward-facing field samples in bounds")
+    low, high = args.range
+    if high <= low:
+        raise SystemExit("height range must increase")
+    stops = ((0.00, (31, 52, 92)), (0.24, (41, 119, 153)),
+             (0.50, (85, 177, 143)), (0.73, (226, 207, 105)),
+             (1.00, (181, 71, 49)))
+    with open(args.output_ppm, "wb") as output:
+        output.write(f"P6\n{width} {height}\n255\n".encode())
+        for value in values:
+            if value is None:
+                output.write(bytes((18, 22, 30)))
+                continue
+            t = max(0.0, min(1.0, (value - low) / (high - low)))
+            for index in range(len(stops) - 1):
+                if t <= stops[index + 1][0]:
+                    ta, ca = stops[index]
+                    tb, cb = stops[index + 1]
+                    blend = (t - ta) / (tb - ta)
+                    rgb = tuple(round(ca[c] + blend * (cb[c] - ca[c]))
+                                for c in range(3))
+                    break
+            else:
+                rgb = stops[-1][1]
+            output.write(bytes(rgb))
+    def quantile(p):
+        return finite[round((len(finite) - 1) * p)]
+    print(f"[RingFieldRaster] voxel_um={voxel_um} triangles={len(triangles)} "
+          f"pixels={len(finite)}/{len(values)} height_min_m={finite[0]:.6f} "
+          f"height_p05_m={quantile(.05):.6f} height_median_m={quantile(.5):.6f} "
+          f"height_p95_m={quantile(.95):.6f} height_max_m={finite[-1]:.6f} "
+          f"height_range_m={finite[-1]-finite[0]:.6f} "
+          f"map={args.output_ppm}")
+    if args.ring_center:
+        cx, cy = args.ring_center
+        def at_world(x, y):
+            fx = (x - args.bounds[0]) * sx - 0.5
+            fy = (args.bounds[3] - y) * sy - 0.5
+            ix, iy = math.floor(fx), math.floor(fy)
+            tx, ty = fx - ix, fy - iy
+            samples = []
+            for px, py in ((ix, iy), (ix + 1, iy), (ix, iy + 1), (ix + 1, iy + 1)):
+                if not (0 <= px < width and 0 <= py < height):
+                    return None
+                value = values[py * width + px]
+                if value is None:
+                    return None
+                samples.append(value)
+            return ((samples[0] * (1 - tx) + samples[1] * tx) * (1 - ty)
+                    + (samples[2] * (1 - tx) + samples[3] * tx) * ty)
+        print(f"[RingRadialProbe] center_m=({cx:.3f},{cy:.3f}) "
+              "radius_m mean_m angular_sd_m min_m max_m samples")
+        for radius in range(1, 17):
+            row = [at_world(cx + radius * math.cos(a * math.tau / 32),
+                            cy + radius * math.sin(a * math.tau / 32))
+                   for a in range(32)]
+            row = [value for value in row if value is not None]
+            if row:
+                mean = sum(row) / len(row)
+                sd = math.sqrt(sum((value - mean) ** 2 for value in row) / len(row))
+                print(f"  {radius:>2} {mean:.6f} {sd:.6f} {min(row):.6f} "
+                      f"{max(row):.6f} {len(row)}")
+    if args.layout:
+        layout = json.load(open(args.layout, encoding="utf-8"))
+        if next(item for item in layout["strates"] if item["order"] == 0)["transition_mode"] != "Gradient":
+            raise SystemExit("--layout must describe a Gradient owner interface")
+        errors = []
+        for index, actual in enumerate(values):
+            if actual is None:
+                continue
+            px, py = index % width, index // width
+            x = args.bounds[0] + (px + 0.5) / sx
+            y = args.bounds[3] - (py + 0.5) / sy
+            expected = gradient_height_um(layout, round(x * 1_000_000),
+                                          round(y * 1_000_000)) / 1_000_000.0
+            errors.append(actual - expected)
+        absolute = sorted(abs(error) for error in errors)
+        rms = math.sqrt(sum(error * error for error in errors) / len(errors))
+        print(f"[RingGradientMatch] samples={len(errors)} rms_m={rms:.6f} "
+              f"p95_abs_m={absolute[round((len(absolute)-1)*.95)]:.6f} "
+              f"max_abs_m={absolute[-1]:.6f} "
+              "expected=owner-resolved-2d-hash-value-noise")
+
+
+if __name__ == "__main__":
+    main()

Standalone/Research/WorldAssemblerM3/Linux30/ProbeTransitionNoise.cpp

@@ -0,0 +1,28 @@
+#include "CoreNamespacePreamble.h"
+#include "ResolvedLayoutInternal.h"
+
+int main()
+{
+    VoxelForgeCore::ResolvedLayoutStratumV2 upper, lower;
+    upper.strateIndex=0;upper.order=0;upper.transitionMode="Gradient";
+    upper.transitionWidthMicrometres=16000000;
+    upper.bedrock.bottomMicrometres=-120000000;
+    upper.bedrock.topMicrometres=-119500000;
+    upper.bedrock.presentInCurrentField=true;
+    lower.strateIndex=1;lower.order=1;
+    lower.ceiling.bottomMicrometres=-126250000;
+    lower.ceiling.topMicrometres=-120000000;
+    lower.ceiling.presentInCurrentField=true;
+    for(const auto& point:std::array<std::array<std::int64_t,2>,5>{
+        std::array<std::int64_t,2>{64000000,-32000000},
+        {65000000,-32000000},{64000000,-31000000},{70000000,-32000000},
+        {80000000,-35000000}})
+    {
+        const auto bands=VoxelForgeCore::EvaluateResolvedLayoutTransitionBandsV1(
+            upper,lower,0,8000000,point[0],point[1]);
+        std::printf("x_m=%.3f y_m=%.3f top_m=%.6f bottom_m=%.6f\n",
+            point[0]/1000000.0,point[1]/1000000.0,
+            bands.upperBedrockTopMicrometres/1000000.0,
+            bands.upperBedrockBottomMicrometres/1000000.0);
+    }
+}

Standalone/Research/WorldAssemblerM3/Linux30/REPORT.md

@@ -0,0 +1,121 @@
+# VoxelForge L30
+
+Work is on `assembler/world`. The speed and look patches are saved separately under
+`Saved/Linux/l30/`; evaluator version is now 16 for the field change. No Unreal files were edited.
+Nothing was committed, pushed, or stashed.
+
+## Ring measurement and fix
+
+I rasterized upward-facing triangles from the L29 mesh (skirt triangles excluded) over the same
+409,600 pixels as the after field. At `(64, -32)`, the L29 field stayed almost flat at `-120.063 m` from
+radii 1–11 m, then broke at 12 m. The expected Gradient at radius 1 m is `-121.360 m`. This is a
+field defect, not shading: the probe is about 67 m from the passage mouth, and the raster has no
+skirts or readable-shading tint. The passage column flare is at that distant mouth as well.
+
+The upper FloatingIslands generator could leave native solid density in the air-side gap above a
+negatively displaced Gradient face. The constant band densities also snapped the face to Core
+voxel levels. The owner Gradient path now clears that gap with positive signed distance and writes
+negative signed distance below the face, allowing the mesh to interpolate its height. The after
+profile follows the resolved hash surface at every sampled radius. Match error fell from RMS
+`0.361765 m`, p95 `1.016178 m`, max `1.304169 m` to RMS `0.110357 m`, p95 `0.218531 m`, max
+`0.248818 m` (one Core voxel is `0.25 m`).
+
+Before/after captures use the same color ramp and bounds:
+
+- [L29 height map](captures/fi-floor-gradient-before-heightmap.jpg), [fixed height map](captures/fi-floor-gradient-after-heightmap.jpg)
+- [L29 readable render](captures/fi-floor-gradient-before.jpg), [fixed readable render](captures/fi-floor-gradient-after.jpg)
+
+## Transition captures
+
+The maps cover the full 640×640 surface and are all below 300 KB. Gradient is the owner world
+without a mode override. Hard and Interleaved use fixture overrides; the resolved layouts record
+those modes.
+
+- [Hard](captures/transition-hard-heightmap.jpg) — flat interface.
+- [Gradient](captures/transition-gradient-heightmap.jpg) — owner field.
+- [Interleaved](captures/transition-interleaved-heightmap.jpg) — fixture override.
+
+## Cost
+
+Five alternating W12 pairs, hashing off and `cache_hits=0`. First table is the separable speed-only
+build, whose hashes remain L29-identical. Second table is the final version-16 build.
+
+| Recipe | L24 | L29 | L30 speed-only | vs L24 | L30 final | vs L24 |
+|---|---:|---:|---:|---:|---:|---:|
+| SurfaceWorld | 1.566 s | 1.653 s | 1.606 s | +2.55% | 1.530 s | +2.68% |
+| FloatingIslands | 16.625 s | 16.779 s | 16.470 s | −0.93% | 16.543 s | +0.21% |
+
+Counter-enabled runs on the same plain W12 workload locate the saved work:
+
+| Recipe | Boundary calls | Window checks → evaluations | Fade calls | Boundary tile / point culls | Column Z tests → guards → radial rejects | SDF calls |
+|---|---:|---:|---:|---:|---:|---:|
+| SurfaceWorld | 19.95 M | 3.54 M → 739 k | 8.2 k | 8.99 M / 8.96 M | 1.87 M → 1.85 M → 1.58 M | 18.4 k |
+| FloatingIslands | 66.33 M | 8.00 M → 2.68 M | 8.6 k | 38.25 M / 23.63 M | 8.17 M → 8.14 M → 6.82 M | 83.4 k |
+
+The fade-tile cull skips 731 k SurfaceWorld and 2.67 M FloatingIslands fade evaluations; the
+column guard exits on nonpositive field values 272 k and 1.27 M times. Timing comes from
+uninstrumented binaries; the counts above use counter logging.
+
+## Hashes and audits
+
+The speed-only v15 build matches all 12 L29 hash records for each recipe/compiler/worker matrix
+(W1/W8/W12), and all 12 records for each 24 m crossing matrix. That is 24 exact comparisons;
+all pass. The final v16 build is deterministic across both compilers and all worker counts, in the
+normal and 24 m crossing runs. Representative W12 hashes (`density / mesh / payload / topology`):
+
+| Recipe | Full detail | Whole view |
+|---|---|---|
+| SurfaceWorld | `ace56c8f205238ad / a9c603a1248de6b8 / ea55f1f4fcc6a894 / 5ea7bc78a1b678ae` | `0e8c5af01df96b14 / 70099e89b77811ed / dbce0fdcf6764126 / ddaf81a1228f9b4b` |
+| FloatingIslands | `ed550e0c8b182695 / 0e410a8e80a3e7f7 / 0751926f0c67d8a4 / f01208bc2f7841ec` | `4ee19ea6b6406ca6 / be648f94c899b47e / 310b525f31604f98 / 10366eb6dfce2384` |
+
+Exact-query hashes also match across v16 runs: SurfaceWorld
+`c949c4df2ce6f9d9 / 114c501e2d830d94 / e6011d3a248d4849`; FloatingIslands
+`7b7c50ac24ccadcc / efcba20c0c70c415 / e604823a249029bf`.
+
+- Interface audit: all 12 compiler/recipe/mode combinations pass; 4,221 columns each, zero holes
+  and air samples, both negative controls reject.
+- The 16 L29 fixture-matrix replays pass passage safety/open-air, validator controls (10/10), L13
+  route parity, L9 proof checks (zero violations), and walkability. `FloorProfileBlend` still
+  reports 2.544 vox in style 1 and 3.645 vox in style 3, unchanged from L29.
+- Audit scope caveat: the L29 files named `floating-islands` were run with
+  `--recipe=surface-world`. With the actual `--recipe=floating-islands` option, the rock-column
+  audit fails on all four styles on both L29 and L30: connected ends are 1/2, 3/4, 1/2, 3/4.
+  The open-air audit passes. This is inherited, but means the L29 report's “two recipes” matrix did
+  not exercise the FloatingIslands CLI recipe.
+
+## Failed and retried runs
+
+- Broad air-gap experiments first lost a SurfaceWorld style-2 support sample. Route/radius masks
+  and support restoration then caused open-air violations. Widening the fade restored that case,
+  but measurement placed the ring far outside the fade, so those variants were discarded. The
+  final owner-only gate and signed-distance face pass the targeted support audit.
+- Early speed variants missed the target: tile-only `+4.04%`, Z-point `+3.11%`, scalar path
+  `+4.33%` vs L24. The final band and fade-tile culls meet the target.
+- The first counter-instrumentation compile failed; the counter hook was corrected and rebuilt
+  with Clang and GCC. One duplicated timing sequence was discarded; only the clean five-pair runs
+  are reported.
+- The first 24 m crossing comparison supplied an extra camera override and mismatched. Rerunning
+  with the L29 camera setup and only `--camera-step=24,0,0` matches all hashes.
+- An early Hard export hit `std::bad_alloc`; retry passed. The first EGL render used an unwritable
+  cache; retry with `XDG_CACHE_HOME` under `Saved/Linux/l30` passed. The first map conversion also
+  stopped before the Hard/Interleaved maps; both were rerun individually and have full raster
+  coverage.
+- The first passage-matrix summary script assumed a different marker order and reported failure;
+  checking each audit marker by name confirms the core matrix passes. A `check=True` true-recipe
+  control runner stopped on the expected L29 exit code 10; rerunning while recording return codes
+  confirmed the same four inherited rock-column failures on L29 and L30.
+
+No build or run exceeded 30 minutes or remained stuck for 15 minutes. Builds and runs used CPUs
+0–11, at most 12 workers, normal priority, and the 6 GiB address-space cap. No Unreal build was
+attempted.
+
+## Orchestrator review (Claude)
+
+- Merged: the ring was a real field defect (air-side gap left solid, face snapped to voxel levels), now fixed
+  (RMS 0.36 → 0.11 m). Cost back to SW +2.7% / FI +0.2% vs L24. The speed part is bit-identical; final v16 is
+  deterministic.
+- Still visible: `fi-floor-gradient-after.jpg` shows faint concentric lines. Unknown whether that is residual
+  geometry (≤0.25 m steps) or the readable shader's height-tint banding; L31 measures it.
+- **Important finding (thanks to Luna's caveat):** L29's "both recipes" passage matrix ran SurfaceWorld twice. On
+  the real `--recipe=floating-islands`, the rock-column connected-ends audit fails in all 4 styles (1/2 or 3/4).
+  Since L27, FI column results were never really tested. L31 priority.

Standalone/Research/WorldAssemblerM3/Linux30/RunCost.py

@@ -0,0 +1,55 @@
+#!/usr/bin/env python3
+"""Interleave five W12 hash-off whole-view cost triplets for L24/L29/L30."""
+import re
+import subprocess
+import time
+from pathlib import Path
+
+ROOT = Path(__file__).resolve().parents[4]
+OUT = ROOT / "Saved/Linux/l30"
+OUT.mkdir(parents=True, exist_ok=True)
+BINARIES = {
+    "l24": ROOT / "Saved/Linux/l24-source/bin/linux/VoxelForgeCoreHeadless-linux24-clang19",
+    "l29": ROOT / "Saved/Linux/bin/VoxelForgeCoreHeadless-linux29-clang",
+    "l30": ROOT / "Saved/Linux/l30/bin/VoxelForgeCoreHeadless-linux30-speed-fade",
+}
+ORDERS = (
+    ("l24", "l29", "l30"),
+    ("l29", "l30", "l24"),
+    ("l30", "l24", "l29"),
+    ("l24", "l30", "l29"),
+    ("l29", "l24", "l30"),
+)
+WHOLE_READY = re.compile(r"\bwhole_view_ready=([0-9.]+)s")
+rows = []
+for recipe in ("surface-world", "floating-islands"):
+    for pair, order in enumerate(ORDERS, 1):
+        for build in order:
+            name = f"cost-speedfade-{recipe}-pair{pair}-{build}"
+            logfile = OUT / f"{name}.log"
+            command = [
+                "prlimit", "--as=6442450944", "--", str(BINARIES[build]),
+                str(ROOT / "Standalone/data/owner_world.json"),
+                "--workers=12", "--world-assembler-prototype", "--stream-benchmark",
+                "--stream-pipeline", "--force-generate", "--clip-radius=3",
+                "--max-clip-level=8", "--max-level=-1", f"--recipe={recipe}",
+            ]
+            started = time.monotonic()
+            with logfile.open("w", encoding="utf-8") as stream:
+                subprocess.run(command, stdout=stream, stderr=subprocess.STDOUT,
+                               check=True, timeout=1800)
+            elapsed = time.monotonic() - started
+            text = logfile.read_text(encoding="utf-8", errors="replace")
+            matches = WHOLE_READY.findall(text)
+            if len(matches) != 1 or "hash=off" not in text or "cache_hits=0" not in text:
+                raise SystemExit(f"invalid cost run: {name}; see {logfile}")
+            ready = float(matches[0])
+            rows.append((recipe, pair, build, ready, elapsed))
+            print(f"{recipe} pair={pair} build={build} whole_view_ready={ready:.3f}s "
+                  f"process_elapsed={elapsed:.3f}s", flush=True)
+
+summary = OUT / "cost-runs-speedfade.csv"
+summary.write_text("recipe,pair,build,whole_view_ready_seconds,process_elapsed_seconds\n" +
+    "".join(f"{recipe},{pair},{build},{ready:.6f},{elapsed:.6f}\n"
+            for recipe, pair, build, ready, elapsed in rows), encoding="utf-8")
+print(f"wrote {summary}", flush=True)

Standalone/Research/WorldAssemblerM3/Linux30/RunCrossing30.py

@@ -0,0 +1,44 @@
+#!/usr/bin/env python3
+"""Verify speed-only L30 hashes on the 24 m crossing against L29."""
+import re
+import subprocess
+import time
+from pathlib import Path
+
+ROOT = Path(__file__).resolve().parents[4]
+OUT = ROOT / "Saved/Linux/l30"
+OUT.mkdir(parents=True, exist_ok=True)
+BINARIES = {
+    "clang": ROOT / "Saved/Linux/l30/bin/VoxelForgeCoreHeadless-linux30-speed-fade",
+    "gcc": ROOT / "Saved/Linux/l30/bin/VoxelForgeCoreHeadless-linux30-speed-fade-gcc",
+}
+PATTERN = re.compile(r"^\[Pipeline(?:FullDetailHash|WholeViewHash|LODHash|ExactQueryHash)\].*$", re.M)
+passed = True
+for compiler, binary in BINARIES.items():
+    for recipe in ("surface-world", "floating-islands"):
+        reference_path = ROOT / f"Saved/Linux/linux29-final-crossing24-{compiler}-{recipe}.log"
+        reference = PATTERN.findall(reference_path.read_text(encoding="utf-8"))
+        for workers in (1, 8, 12):
+            name = f"crossing-speedonly-default-{compiler}-{recipe}-w{workers}"
+            logfile = OUT / f"{name}.log"
+            command = [
+                "prlimit", "--as=6442450944", "--", str(binary),
+                str(ROOT / "Standalone/data/owner_world.json"),
+                "--world-assembler-prototype", "--stream-benchmark", "--stream-pipeline",
+                "--stream-hash", "--force-generate", "--clip-radius=3",
+                "--max-clip-level=8", f"--workers={workers}",
+                "--camera-step=24,0,0",
+                "--region-crossing", f"--recipe={recipe}",
+            ]
+            started = time.monotonic()
+            with logfile.open("w", encoding="utf-8") as stream:
+                subprocess.run(command, stdout=stream, stderr=subprocess.STDOUT,
+                               check=True, timeout=1800)
+            elapsed = time.monotonic() - started
+            rows = PATTERN.findall(logfile.read_text(encoding="utf-8", errors="replace"))
+            ok = len(reference) == 12 and rows == reference
+            passed &= ok
+            print(f"{compiler} {recipe} W{workers} elapsed={elapsed:.3f}s "
+                  f"hash_rows={len(rows)} {'MATCH' if ok else 'MISMATCH'}", flush=True)
+print(f"[CrossingSpeedOnly] runs=12 status={'PASS' if passed else 'FAIL'}", flush=True)
+raise SystemExit(0 if passed else 1)