Fr0zkaandClaude Opus 5.5 6ee433efa5 test(gate): stress repro judges terrain penetration -- gate on 10/10 clear, gate off 3/3 falls through ...

The old criteria (travel distance) could not tell a working gate from a broken one: every run,
gate on or off, ended at (455.7, 0, -58.1). That spot is measured air ~1.2 m above a real floor
(density zero-crossing at world Z ~ -275.7 cm), so it is a terrain trap, not a fall-through.

The stress test now drops the pawn fast onto an unready support tile (0,0,-1) and samples the
density at the capsule feet every frame, sweeping at <= half a voxel between positions. PASS =
no measured clearance below -5 cm.

Owner config (radius 3, max level 6, distance 768, sheets off):
- gate on: 10/10 PASS, min clearance +120.5..+120.9 cm, one hold of 0.43-0.47 s each,
  support submitted in ~0.7 ms, collision ready in 0.43-0.47 s
- gate off: 3/3 FAIL terrain_penetration, clearance -5.7..-8.1 cm
Edit-ghost, clipmap no-overlap sweep: pass. Test-harness code only; no production path changed.
This validates a49725d.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ

2026-09-25 06:11:08 +02:00

..

__pycache__

fix(streaming): vertical reach follows the strate, and the level below the sheet ring is filled

2026-09-23 01:49:57 +02:00

RunVoxelForgeAutomationR2.ps1

tooling(test): one command to test VoxelForge, with a commandlet-vs-game parity check

2026-09-18 05:13:16 +02:00

VoxelForgeTest.ps1

test(gate): stress repro judges terrain penetration -- gate on 10/10 clear, gate off 3/3 falls through

2026-09-25 06:11:08 +02:00