Luna: shape_compile profiled (8 workers, detail band ~323 ms of ~545 ms over 9.39M
candidates; roughness dominates). Exact vertical roughness endpoint reuse in
ShapeWorldInternal.h, hashes unchanged: ~548-577 -> ~535-548 ms. Overlapping
pipeline/pool with shape or streaming made things slower, so it stays serial (pool
precompile now 4-20 ms). Export starts before the first CPU frame. Marker-miss stall
reproduced and gated differently; the forced-cold survival audit now hits
DXGI 0x887A0005 (device removed) on a timestamp query and is NOT passing. Auto
survival passes (6.16 GB). The vertex count at InitialClipmapReady counts CPU
batches only (GPU-resident tiles excluded) -- confirmed counting, not missing geometry.
My runs outside the sandbox (Step25.exe, marker removed first, interleaved, -Timeline):
CPU 1.329 / 1.295 / 1.318 s
GPU cached 1.152 / 1.170 / 1.137 s, all 1,434 GPU tiles (timestamps 292 / 260 / 356 ms,
max dispatch 19.0 / 15.9 / 75.2 ms)
GPU marker miss 2.015 s -- REGRESSION vs step 24's 1.336 s. CPU had all 2,226 tiles by
~1.3 s, but near_all_tiles_ready waited for the post-view shader warmup
(queue 1,025 ms, finished 1,955 ms; handoff cpu_started=1434 takeover=0).
Audits: hashes w1/w8, walk 5,642/5,642, near 960 / far 1,114 0 diffs vs CPU and
WARP, thin 353, ten captures 2+2 edge pixels as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
ApplyDetailBand claims eight adjacent columns per batch, keeping each column's scalar
order: shape stage ~586 -> ~566 ms in Luna's profile. Hashes w1/w8 identical.
My runs outside the sandbox (Step20.exe, marker removed first, interleaved):
CPU 1.319 / 1.287 / 1.288 s
GPU 1.320 (marker miss, 0 GPU tiles) / 1.244 / 1.215 / 1.219 s (match, ~1,400 GPU)
Shape compile 549-570 ms in both modes. The 669-821 ms gap in cached runs is still
there: export starts only after [ChunkCrossingWork] reports the ~840 CPU tiles
(LOD0-2) finished, so GPU export waits behind CPU meshing on the shared workers.
Slowest GPU tile 1.7 / 18.4 / 27.3 ms in runs b/c/d.
Audits: hashes, walk 5,642/5,642, near 960 / far 1,114 0 diffs vs CPU and WARP,
thin 353, survival 6.14 GB, ten captures as step 18. Far vertex-distance diagnostic:
247 bound failures (max 64.56 cm), unchanged since step 16.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Cold first use: near base 4.2 ms, near detail 1,595 ms (the floor), connector
rings 630 -> 409, skirt classify+emit ~1,409 -> 366. Production warm-up is
still ~2.03-2.06 s; whole view median CPU 1.356 s vs hybrid 3.044 s.
Near 960 + far 1,114 tiles: 0 topology/protected/thin diffs vs CPU and WARP;
hashes, walk 5,642/5,642, survival pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Luna's session ended on an API "Bad Request" before a final report; state is
unverified by me. In the log: GPU clipped-skirt emitter (count/scan/emit,
protected signs and critical air honoured), exposed-skirt audit passing at
the end; first-present stall reproduced on every launch (2.36-2.59 s, not
exe identity/idle/CPU run) and hidden by holding the CPU-ready frame until
GPU residency. Remote LOD3-4 band still differs from CPU; draw ranges and the
one inspected LOD3 tile match, cause not yet found (one-tile probe mid-fix).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Luna measured the startup density-parity check at 1,049 ms, nearly all of the
~1.13 s before shape compile; it now runs after first display and still passes
3,436/3,436. CPU hashes 44/44 at 1 and 8 workers, walkability 5,642/5,642,
headless 8-worker clipmap 0.769 s. Stopped by the owner mid-round, while
auditing the remote far holes; first-launch stall and hybrid speed untouched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Near LOD0/1 (detail band, relief, root refinement, normals) now evaluated and
meshed on the GPU. 960 near tiles: zero sign/topology differences vs CPU and
WARP, vertex max 0.0049 mm (was 15 cm); far survival audit passes; CPU hashes
44/44 unchanged. Far connector-panel outlier (64.56 cm, LOD8) remains a
tessellation difference, and remote captures show missing far geometry on GPU.
Cold readiness (viewer clock, my interleaved runs): CPU 2.51/2.49/2.40 s,
GPU 5.05/2.68/2.80 s. The ~2.1 s Present stall hit only the first GPU launch.
Viewer spends ~1.13 s before shape compile starts (startup checks), which is
the gap between the 0.95 s benchmark and ~2.4 s on-screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Whole far field on the RX 7900 XTX: 112 ms total (connector rings 61 ms). Cold hybrid 2.303 s vs
all-CPU 2.314 s (within noise): the far field is no longer on the wall-clock critical path.
0 sign/topology differences vs CPU and WARP incl. 127,401 protected and 353 thin-feature cells;
repeat GPU runs identical; far survival passes on GPU meshes; CPU hashes unchanged.
Open: CPU/GPU vertex distance mean 1.15 mm but max 64.56 cm, 247 tiles over the quantisation bound.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Up to 32 tiles per deferred command list, one polled event per batch, no per-tile waits; CPU
upload/enqueue 723 -> 46 ms. GPU far meshes pass far survival (7,200 strata boundaries, 10,976
connectors, 0 missing/holes). But hybrid cold 4.36 s vs CPU 2.29 s: whole-tile GPU timestamps sum to
646 ms (0.58 ms/tile; step 3's 0.03 ms covered part of the work only), divergent per-thread shape
loops; CPU far-input export 1.6 worker-s. CPU 44/44 hashes unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
1,114 of 1,266 far tiles meshed on the GPU; vs CPU and vs WARP: 0 sign/topology differences,
including the protected/thin exception audit; max symmetric vertex distance 0.125 cm; repeat RX runs
identical; GPU field+mesh 0.029 ms/tile average. Strata survival 7,200/7,200, but connector survival
fails (GPU lacks the connector repair panels). Hybrid cold clipmap 5.74 s vs CPU 2.23 s: dispatch and
readback overhead, not compute (~33 ms of GPU work in total).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Seven LOD2-8 tiles: RX 7900 XTX field+meshing 0.335 ms vs CPU generateTile 15.81 ms; repeat runs
bit-identical; CPU W1/W8 44/44 hashes unchanged. Not yet a real gain: rock/air signs still come from
CPU masks for every sample. Viewer does not draw GPU tiles yet; no whole-view timing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- Compute shaders classify cells from CPU sign bits, scan output offsets, emit vertex/index buffers
and indirect-draw args. Two 32^3 tiles: 0 topology differences hardware vs WARP; two runs on the
RX 7900 XTX identical; max CPU/GPU vertex distance 0.000122 cm (LOD0), 0.000244 cm (LOD1).
- GPU kernels 0.049 / 0.071 ms vs CPU tile 2.33 / 1.99 ms, but CPU input preparation dominates
(7.25 / 2.84 ms wall): no whole-view gain until the field itself runs on the GPU.
- VoxelForgeFieldShared.h: first shared C++/HLSL field math (integer noise hash, ...).
CPU path unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- Relief per wavelength band compared with the owner field; the 4-8 and 8-16 voxel bands were lost.
Restored within the partition-of-unity blend; max detail gradient 0.545 (limit 0.55).
- New owner-band gate: fails all six views on de14f00, passes all six now.
- W1/W8 44/44; path hash both directions; routes 5642/5642; stair-distance, ring, thin-sheet,
coarse-panel, far-survival audits pass; bad-shell control fails.
- Cold 1.127 s vs 1.108 s (within spread); nearest-tile readiness 12.20 vs 12.16 ms.
Caveats: the 143-ray GridStair normal audit is at 62.2% vs its 60% limit (was 76.9%); in the tunnel
capture the floor shows a regular dimple pattern, and the passage shaft close-up is still smooth.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- Stairs: cave, floor, strata and passage relief were effectively summed in overlaps (owner ray
~0.94 voxel of displacement); now partition-of-unity weights: -0.288 voxel there, max detail
gradient 0.323 voxel/voxel. High-detail patch scan 133 -> 0; exact midpoint edge roots kept
(removing them: 7,993 bad roots, 46 patches).
- Fins: exposed skirt triangle scan 1,776 -> 0; thin sheets 0; coarse off-surface panels 0.
- Path hash both directions equal; W1/W8 equal; routes 5642/5642; passage detail ratio 0.850;
far survival passes, bad-shell fails; 30-crossing flight: nearest tile 15.1 ms median, 124 ms max.
Caveats seen in the captures: the owner-ray wall has visibly less relief than before; the fin
before/after captures do not show the fins (evidence is the scan only). Cold StreamFullClipmap
0.758 s vs 0.741 s (+17 ms, Luna's interleaved run). Owner to judge: bin\VoxelForgeLookCheck4.exe.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Not verified as a whole. In the tree when Luna's session ended ("model at capacity"):
- fins: LOD seam skirts could hang into tunnel air; skirt triangles are now clipped against the solid
half-space and carry a per-face mask so a host can hide skirts between same-LOD neighbours.
- choppy LOD0 stairs: marching cubes' linear edge interpolation misplaced vertices where the relief
bends within one cell; edge crossings corrected with the exact field (82 patches, midpoint-edge
errors 18,818 -> 3,288); normal halo now ignores the +-4.125 fallback samples.
- an explicit unclamped Core distance query for audits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- Core compiles exact-tile analytic slabs for entering tiles; a Z-column sampler reuses the coherent
noise context along each tile column; the viewer keeps residents and prioritises nearby tiles.
- 30-crossing straight flight: nearest tile ready 15.8 ms median / 27.6 ms max; full crossing wall
121 ms peak; worker CPU per crossing 545 ms median, 834 ms max.
- W1/W8 hashes equal; routes 5642/5642; look, passage, stair, thin-sheet, coarse-panel and far
audits pass; bad-shell control fails; path-hash audit kept.
Cold whole view, measured by me interleaved (busy machine): 1.242 s vs 1.255 s for 3b37d57, parity.
Still open from the owner (LOD0): fins along a strata seam, choppy stair facets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
From the owner's fly-through ("very impressive, in some cases slightly better than the original"):
- Streaming: Core compiles world-aligned fine-detail pages for tiles entering the view and releases
them when they leave; the viewer keeps resident tiles. One chunk crossing: 144 new tiles, 1,822
kept (was a full rebuild). A tile built as a late page hashes identically (density, mesh, payload,
topology) to the same tile from an initial build.
- LOD>=1 fins: off-surface planar connector panels are now checked against the source surface and
projected onto it; coarse audit 0 off-surface panels; far survival passes, bad-shell still fails.
- LOD0 stair patches: 2,630 sign-changing edges had one endpoint at the fixed +-4.125 fallback
(carve surfaces were excluded from distance storage); distances now completed analytically, 462
packed signs corrected; the audit now fails on any sign edge missing either endpoint (0 of 952,997).
- W1/W8 hashes equal; routes 5642/5642; look, passage and far audits pass.
Verified by me, interleaved (8 workers, cold): 1.014 s vs 1.008 s for aeeedaa, no regression.
Open: a chunk crossing still costs ~1.2 s of page compilation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- The copied generator, mesher and Compat stand-ins compile inside vfcore::detail.
- CheckCoreSymbols.ps1 (run by Build.ps1) fails on any unqualified Unreal-style symbol in the
library: 16,255 on 557f6aa, 0 now. A UE 5.7 CoreMinimal.h + VoxelForgeCore.h smoke compile passes.
- Output identical: 11 hash rows at W1/W8, routes 5642/5642, look/passage/far audits pass,
bad-shell control fails, six captures byte-identical.
Cost, measured by me interleaved (8 workers, cold, 4 runs each, first run excluded): 0.963 s vs
0.937 s for 557f6aa, ~27 ms in shape compilation; same math, so codegen/inlining. To be found.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- Standalone/Core: public header VoxelForgeCore.h (no Unreal types), static library target,
ResolvedWorldSnapshot (from the schema-v1 JSON), World (compile, generateTile, density/sign,
point/segment solid, classifyBox), host-supplied JobScheduler (the core starts no threads),
sequenced, idempotent EditTransaction returning affected tiles per LOD.
- The viewer, benchmarks, edits and audits run on Core; StreamingWorld stays host code.
- Same as round 11: 11 hash rows at W1 and W8, routes 5642/5642, look/passage/far audits pass,
bad-shell control fails, six fixed captures byte-identical; cold W8 1.025 s vs 1.041 s reference.
- SHARED_CPP_LIBRARY_PLAN.md rewritten for a UBT module compiling the same sources via shims.
Open issue before Unreal: Core's implementation still compiles the Compat stand-ins named like
Unreal types (TArray, FVector...); inside a UE binary that is an ODR clash. Must be namespaced.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Fr0zkaandClaude Opus 5.5