Files
VoxelForge/Standalone/Research/WorldAssemblerM3/Linux111/REPORT.md
T
Fr0zkaandClaude Opus 5.5 5ec09d1ff1 passages: dense centripetal spline + open-air half-pipe attempt (L111, failed audits)
Route resampled to ~1 m (310 -> 2,790 segments); open air writes a 0.75 m floor slab plus 1.0 m
side walls, no roof. The 3D spline overshoots between planned route points, raising floor grades
above 15 deg; a grade-limited variant left 2 unsupported samples on passage 0-1, and the shell/
ripple audits still model the old chord route. Stopped after two designs. Not merged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016dhxM43dnWvUu2B5Ph1iG1
2026-10-29 18:09:46 +01:00

43 lines
2.6 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Linux111 report
## Design
Version 218 resamples passage controls with a centripetal Catmull–Rom curve at about 1 m spacing (310 control spans became 2,790 prepared segments). Open-air shells use a 0.75 m floor slab and side walls up to 1.0 m above the floor; there is no roof. Passage interior remains higher priority than shell. The second design constrained the floor route to a 14.5° grade ceiling.
The per-tile candidate lists were not measured. The 310→2,790 figures are prepared route segment counts, not tile candidate list sizes.
## Speed
L109 medians below are the candidate column from the saved five-pair timing matrix. L111 timing was not run after the audits failed.
| Stratum | L109 W8 near-ready (s) | L109 W12 near-ready (s) | L111 W8/W12 |
|---|---:|---:|---|
| SurfaceWorld | 0.737 | 0.761 | Not run |
| FloatingIslands | 0.911 | 0.863 | Not run |
| TunnelNetwork | 0.956 | 0.895 | Not run |
| VerticalShafts | 0.789 | 0.738 | Not run |
## Audits
- Clang standalone build completed. The second design removed all grade failures. Passage 0–1 still had 2 unsupported walk samples; passages 1–2 and 2–3 passed. The combined resolved-passage audit failed.
- Mouth-profile audits passed 3/3. Naturalness and ripple audits passed 2/3.
- The half-pipe shell audit passed 2/3; passage 0–1 reported 11,544 floor and 6,945 wall violations. A targeted trace showed at least one reported floor sample was 0.101 m inside the passage after relief, where interior correctly overrides the shell. The audit's smooth-route overlap model still disagreed at that point, so the remaining shell counts are not conclusive.
- Fast tier, Clang/GCC W1/W8/W12 hash matrix, readiness timing, and Unreal Linux build were not run. Canonical v218 hashes were not generated.
## Captures
No Linux111 capture images were generated. Mouths, 25/50/75% stations, open-air sections, and programmatically verified 4 m outside/interior close-ups remain outstanding.
The candidate audit found these open-air sections:
- passage 0–1: 6.408–16.782 m; 19.500–24.439 m; 1,044.046–1,498.708 m
- passage 1–2: 81.654–85.646 m; 104.092–104.829 m
- passage 2–3: 7.701–26.008 m; 372.697–377.363 m
## Failed attempts
1. Dense spline plus half-pipe: walk grades exceeded 15° and passage 0–1 failed shell, naturalness, and ripple checks.
2. Dense spline plus a grade-limited floor: grade failures cleared, but passage 0–1 retained 2 unsupported walk samples and its shell/naturalness/ripple audits still failed. Work stopped after this second design as requested.
Logs: `Saved/Linux/l111/build-clang.log` and `Saved/Linux/l111/audit-owner.log`.