Stopped by low memory (another app at 14 GB; processes failed with 0xC0000142).
r6 (compiled and measured, owner playing during the run), step 2e -> step 2f r6:
crumbs < 1 m^3 (max per profile) 2,898 -> 3 FAIL (0,0,0,0,2,1,3,2)
flakes (shard share / p95 angle) 40.7% / 84.2 deg -> 2.1% / 33.1 deg pass
lattice-scale detail energy 0.832 -> 0.016 pass
grid signature (autocorrelation) 0.666 -> 0.349 pass
min solid share / roof openings 2.7%, 26,657 -> 79.2%, 0 pass
worst profile ring time 642.8 -> 636.3 ms FAIL (6 workers, 259^3)
Step 2e measured 642.8 ms here vs 570 ms idle earlier: the game was costing ~12% during this run.
Brick proofs + audit, seams + injected seam, 1 vs 6 worker determinism pass. After r6, feature
probabilities were lowered to remove the last crumbs: NOT compiled, NOT measured. TraversalSeeds,
in-game captures and the LOD-rejection figure for 2e are still to do. Reject screenshots included.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Editor-only, default off. Seeded chamber graph (jittered XY grid, spanning tree, optional loops,
tunnels, shafts, pillars, ledges, spires, floating masses, basins), 8 profiles, four detail bands
at every surface-affecting 25 cm sample, sound brick proofs. 259^3 ring, six workers, medians of 3:
404-570 ms (worst TerracedBasin 570.0 ms). Detail, seam, bound-audit (0 violations, undersized
control caught), determinism (1 vs 6 workers) and TraversalSeeds all pass; live tests untouched.
Not accepted yet: the profiles are 81-97% open air. In the slices a "TightNetwork" is a large void
with scattered solid blobs (rooms of 0.5-0.76 x pitch overlap and merge), and the finest detail
band shows as salt-and-pepper speckle with 22-109 separate 1 m components per ring: fast partly
because air bricks skip, and the look needs the owner's judgement. Also missing vs live: maze,
flat/plain, crystal-chamber, surface-world and underwater grammars; water geometry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Stopped by low memory (another app held 12.5 GB; processes failed with 0xC0000142).
Editor-only, default off: a seeded connected room graph (varied chambers on a spanning network,
optional loops, shafts, rock features, ledges, basin floors), eight parameter profiles, the
step-2d brick driver and detail bands, a new test VoxelForge.ParameterizedGeneration.TraversalSeeds
(PASS in step2e_functional_01, which also proves the tree compiles). Existing live tests untouched.
Not yet run: the eight-profile ring benchmark, variety metrics, slices, detail/artefact/determinism
checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Editor-only, default off (voxel.ResearchRedefinedDensityField). The redefined field is a seeded,
periodic cross-corridor pattern per strate plus the authored passages, landings and a shaft tree,
with four value-noise detail bands at every near-surface 25 cm sample and sound 8^3 brick proofs.
259^3 ring, six workers: 308 ms median (467 ms without skips) vs 8.9 s for the live field.
Detail, boundary-artefact, determinism (1 vs 6 workers, two runs) and bound-audit checks pass.
Why it is not a pass: the slices show a mostly-solid field with a few straight corridors, where the
owner's world is mostly open space; rooms, the tunnel network, composer recipes and archetypes are
gone. Much of the speed comes from 60% of bricks being proven solid in that simpler world.
What it does show: detail at full resolution plus brick skipping costs ~80-130 ns/sample; the
cost of the live field is how rooms/tunnels/passages are represented, not the detail or the lattice.
The two walkability tests were redirected to the research field in the working tree; that change
is NOT committed (saved as scratchpad step2d-test-redirect.patch) so they keep testing the live world.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Editor-only, default off. 259^3 ring split into 1,000 aligned 32^3 chunks; cache/index builds
bounded by chunks (948 room/SDF caches, 800 active-op lists, 8,532 index tables); 800 block setups
+ 201,243 scalar fallback points (1.16%); no per-point GetDensityAt on supported routes.
Six workers: live 7.07 s wall / 1.678 us per sample; prepared 7.92 s / 1.595 us.
Candidate visits 21.2 -> 15.8 per sample, evaluations 6.31 -> 5.75; room / tunnel / tunnel-core
evaluations unchanged (48.1 M / 5.0 M / 38.4 M for 17.4 M samples). Passage evals 18.1 M -> 8.4 M.
Exact: 0 Q16/sign disagreements, five seeds, same hash on 1 and 6 workers, reach shrink caught.
Luna's verdict: 600 ms is not reachable while every lattice point evaluates the exact current
density; 27.7 worker-CPU seconds need >= 7.7x less work.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Editor-only brick API (<= 8^3 points per call, TunnelNetwork/Underwater op-stack routes, 1.16%
scalar fallback). Exact: 0 Q16/sign disagreements on the full 259^3 ring and the five-seed probe
set, same hash on 1 and 6 workers, reach shrink still caught (18,107 Q16 / 735 sign).
Speed: 69.19 s wall, 17.6 us/sample vs live 7.04 s, 1.65 us/sample. Stack sampler (inclusive):
BuildChunkCache 93.5%, PropagateSdfOverBox 92.5%, BuildActiveOpList 92.6% -- each brick rebuilds
the cache windows and active-op lists; EvalBlock itself is 3.6%.
Live path attribution (inclusive, 68,934 stacks): op-stack RoomGraph EvalBlock 54.4%, SDF and
spatial candidate scans ~28%, tunnel core 18.4%, passage floor segment 15.0%, structural posts
14.6%, noise octaves 2.6%, disturbances 0.6%, diff layer 0.3%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Editor-only ablation (explore commandlet, -regioneval, default off): 8^3 bins for rooms,
room-floor joins and tunnel chains, but every point still goes through GetDensityAt.
259^3 ring, seed 1337, six workers:
live : 6.776 s wall, 29.16 s worker CPU, 1.679 us/sample, 21.2 candidate visits/sample
binned: 19.54 s wall, 50.02 s worker CPU, 2.879 us/sample, 16.4 candidate visits/sample
Correctness: zero Q16 (x16, ties away from zero) disagreements on the full ring and ~284k probes
on 4 more seeds (composer recipes, warped rooms, passages, landings, strate edges, edits);
shrinking room reach to 0.5 -> 18,107 Q16 / 735 sign differences (the check bites).
Not the planned region program: the step-2 question is still open. Baseline for the next attempt:
1.68 us CPU per sample on the live path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Rebuild plan step 1 (RESEARCH-SPEED-2026-09.md), all behind default-off switches.
A. Direct cook on a dedicated thread, 27-tile support cohort: core cook p50 1.50 ms, p95 2.28 ms;
a 3,949-tri tile 1.67 ms extract+cook. PASSES the 10 ms gate. Through RMC's route the same
support bodies became ready 8.46 s p50 / 10.80 s p95 after their meshes existed: FAILS 150 ms.
Exact-target capsule sweep confirmed (0.75 ms after body update).
B. 100 rapid underfoot digs on CMC with a field override: 883 false-support frames, 0 false-air,
0 invented velocity. CMC's floor comes from collision-scene traces -> step 4 = field-aware Mover.
C. 341 prequeued tiles, render on: cap 4 = 238 applies/s, cap 8 = 476, cap 16 = 639 (drain p95
2.22 ms vs 2 ms gate); first visible 1 frame after release; no RT/RHI backlog. Tune drain,
no grouping needed yet.
D. Same 128^3 region, 64/64 tile hashes equal in export and game. The "263 ns/sample" was export
WALL time with 15 workers sharing a lattice (~3.4 us CPU/sample); game tile time includes
meshing and duplicated borders (+22%); contention cap 1 vs 14: 74 vs 112 ms per tile.
Profiling is not the cause.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Compiled and run (cap 14 / 12 / 8), then stopped: another app held 12.5 GB, free memory fell
under the 6 GB launch floor and processes failed to start (STATUS_DLL_INIT_FAILED).
Measured so far (owner world, 120 s windows):
- 343 L0 tiles, request->collision-ready p50/p95: cap 14 = 262/440 ms, cap 8 = 196/238 ms;
scheduler queue wait p95 141 ms -> 0.9 ms. Initial support tile at cap 14: RMC submit->body
7.47 s, first check->ready 9.73 s; at cap 12: 0.33 s / 2.54 s; at cap 8 a 3,949-tri tile
reached body update 2.8 ms after RMC submission. Waiting, not cooking, dominates.
- NOT confirmed: a capsule sweep hitting the exact target body (the 0.75 ms hit was another
component); the 10 ms core-cook and 150 ms/27-tile thresholds are unscored.
- CMC cannot take a same-frame density floor: FindFloor/ComputeFloorDist trace the collision
scene. Underfoot digs (100-dig test), upload throughput (render-enabled caps 4/8/16) and the
8x per-sample question are not run. Per-sample profiling was fully disabled in these runs, so
it does not explain the 8x.
Switches (all default off): voxel.Step1GenerationCap, Step1PauseGenerationAfterSeconds,
Step1MaxMeshApplies, Step1PrequeueVisibleLOD0, Step1UploadDisableCollision, Step1CollisionProbe,
Step1CoreCookBenchmark; harness -EnableRender. Also: plan step 3b, AVX2 need not match scalar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Round three (Sol fork): keep precise float procedural math, restructure evaluation (region
programs, feature binning, brick certificates, shared lattice), a versioned 16-bit lattice as the
common mesh/edit/collision cache, integer edit composition on GPU for craters. Seven ordered steps,
each with a numeric pass/fail gate; day one instruments collision and upload clocks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Fork of the Sol research session with the owner's answers (player-only 1 s collision; bounded
digging but fast crater spells). AVX2 integer kernel 4.25-5.86x over its scalar reference with
exact parity; radius-10 m crater = 714 bricks, cached-field edit < 1 ms (render not measured).
Cost estimate revised to 6-12 engineer-months; kill test gate <= 0.35 s worker wall on real plans.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Sol 6 (high, web search) research round: recommendation, three architectures, determinism
contract, migration with a 5-day standalone kill test. Standalone probe in
Saved/Research/brick_kernel.cpp (not VoxelForge code): 16.8M integer samples in ~0.36-0.48 s,
brick-classified ~0.1 s, 0 sign mismatches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
1. Collision cook breakdown (request -> ready), critical support tile:
spawn (0,0,-1): generate 107 ms, apply < 1 ms, RMC submit->body 479 ms, total 587 ms;
deep floor (0,0,-7): generate 82 ms, RMC 1,441 ms, total 1,548 ms.
Almost all of the wait is inside RMC (end-of-frame update + async pool + Chaos cook + body
install, not separable from our side). Critical priority does not shorten it. Collision is
async, complex-as-simple, fast-cook off; skirts are ~16-18% of collision triangles.
No cook change made. Startup outlier: first support tile waited 2.09 s for its game-thread apply.
Underfoot dig: a carving brush that intersects the pawn's capsule and support tile now
disables the old body and withdraws readiness on the carve frame: 0 frames standing on removed
ground (replacement 91.8 ms later). 8 neighbouring digs: 0 gate frames. Gap audit 0.
2. Stack sampler, 49.4 s game path: top resolved leaf was the profiler's own
VoxelDensityProfile::BucketFromName (4.86%). Linear label scan -> CRC-keyed lookup with exact
compare: 59.26 -> 57.87 ms/tile (-2.35%), 980/980 tile hashes identical.
3. Measured only: F (classifier mode 1, no exact check) +48% worker CPU, 0/980 tiles differ ->
not worth it. H (handoff component scans) p95 0.07 ms/frame -> not worth it.
E (FullResClipLevels=1): worker CPU 56.7 -> 35.7 s, settle 9.6 -> 7.0 s, crossing samples
-30%; changes the look, owner's decision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- Dig near the pawn: a same-tile collision recook withdrew readiness although the old body was
still installed, so the gate held a standing pawn (957 of 1,931 frames over 8 near digs).
A tile now stays ready during a recook while collision is still wanted and its existing body is
valid. After: 0 gate frames, 0 falling frames over 2,604 frames. Dig directly under the pawn
still falls (~127 cm, max ~502 cm/s). The reported "accelerating toward the ground" was not
reproduced; the false hold is the measured part.
- See-through: the retire logic only waited for replacements that overlapped the old tile in
volume and missed desired neighbours touching at a face/edge/corner. Handoff now includes
contact. New surface-witness gap audit (24 surface points per tile, skirts excluded, catches an
injected early hide). 6000 cm/s walk, 75 s: 3 gaps / 51 frames / longest 603 ms -> 0.
Dig session: 0 -> 0. Overlap audit and edit ghost stay at 0.
- bEnableDensityVolume defaults to false; when off: no volume, no fill thread, uploads or tick
work, no volume-dependent proof bypass; terrain MIDs get VolP5.z = 0 (enable off), other VolP*
black, VolTex* null, so M_Test1's volume nodes return their neutral result.
Gate: deep gate-on passes (79.9 m, 3 holds, -0.101 cm), gate-off penetrates (-5.1 cm).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
From the outside performance review (items 1-4; item 5 prototyped and reverted).
1. Collision gate: a support request outside the stamped desired set was cancelled by the rebuild
it forced, and the gate held the pawn with gravity 0. Baseline deep-drop (floor at (0,0,-7),
outside the aligned L0 ring): 1 hold of 30.0 s, never released. Fix: the target and 3 tiles
below are retained through rebuilds at CollisionCritical; hold only when the swept capsule is
about to enter pending support; release restores movement mode, gravity and downward speed.
After: 3 holds, 2.21 s total, 112.8 m horizontal progress; gate off still penetrates (-7.4 cm).
2. Suspected cleanup regression (out-of-layout stacks): not real. 44 paired boundary tiles,
30.9 ms vs 32.6 ms at b4ac996, hashes 44/44 identical. No change.
3. PawnCollisionRadiusChunks (new, default 1): L0 tiles outside the collision set stay visible
without Chaos cooks; anchors and the gate's support column are unioned in. Cook requests
~217/min -> ~30/min (-86%). Critical support ready time did NOT improve (9.5 s -> 10.6 s in the
deep-drop fixture; the wait is the cook itself, ~7.4 s cook-to-ready there).
4. Dig: exact pre-edit L0 density cached (one 35^3 grid, 171.5 KB), carve replays current mods on
it. Sync remesh 99.4 ms -> 4.7 ms. 16/16 random carves hash-identical to full regeneration.
5. Parallel grid fill for the critical tile: 16/16 hash parity, but the waited-on tile was already
meshed; the wait was collision cooking. Reverted.
Review G answered: M_Test1 still ray-marches VolTex0 (custom HLSL mini-sun shadow), so the density
volume is live. Known and left alone: outside the strate layout the fallback density can be solid
while the gate treats those tiles as air.
Tests: VoxelForgeCollisionDesiredTilesTest, VoxelForgePreEditDensityCacheTest; no-overlap, edit
ghost, descent corridor pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Stopped mid-round: the PC ran out of memory (another app held 11 GB), new processes failed to start
(0xC0000142), and the round ended without verifying anything after the edit.
Confirmed in code (performance review finding 1): a support request outside the stamped desired set
forces a rebuild that cancels it, the gate asks for one unresolved tile at a time, and it holds
before the pending tile is anywhere near the pawn's next step.
Uncompiled edits: a short collision-only support column retained through desired rebuilds and
prioritised; hold only when the swept capsule is about to enter a pending tile; downward speed
restored on release; opt-in deep-drop fixture (carved shaft) in the stress harness.
Evidence so far: shallow 10-voxel fall, gate on, before the edit: 1 hold of 1.51 s, clearance
+120.6 cm. The 80/160-voxel attempts spawned OUTSIDE the strate layout (support unavailable,
zero holds) and failed the penetration check at -11.1 cm: not the reviewed loop, but worth a look.
Compile risks: GetGravityZ(), TSet pruning in the rebuild, the fixture's carve/log arguments.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- CODEMAP: data-flow diagram, §3.2b/§3.2d, generator and strate-manager
rows, test rows and §4.2/§5 now describe the stack-only path; the
deleted archetype functions, bUseOperatorStack and the Not Op Stack
stats are gone; line hints re-synced for VoxelGenerator.cpp,
VoxelStrateManager.cpp and VoxelStrateDefinition.h.
- ARCHITECTURE §8.1: archetype table lists stack builders; §8.10 surface
column and shaft cache entries name their current owners.
- REVIEW_FINDINGS: tick "Operator stack as the only density path"; add
the no-strate-manager fallback world as its own open item.
- fable-idea: T1.a status names the current column caches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
With the operator stack as the only density path, the per-archetype
density functions have no caller left in the game:
- Delete UVoxelGenerator::GetSlabDensity, GetMazeDensity,
GetSurfaceDensity, SurfaceDensityFromColumn, GetVerticalShaftDensity
and GetFloatingIslandDensity (~1000 lines) with their declarations.
- Drop GetDensityWithParams' OutWarpedPosition out-parameter; only
the native GetDensityAt branch removed in the previous commit used it.
- OpStack Slab/Maze/VerticalShaft/FloatingIsland and SurfaceHeight
tests: remove the stack-vs-legacy comparisons; keep decomposition,
finiteness, liveness, window-invariance, cache-cost and box-verdict
checks (Shaft cache timing now measures the stack source).
- PassageLandsInOpenSpace: the source-only footing probe evaluates
the archetype stack built without a strate manager instead of the
deleted functions.
- Comments that cited the deleted functions now cite the operators
(FSlabVoidSource, FLatticeCorridorSource, FIslandBlobSource, ...).
GSurfColCache is documented as ClassifyTile's column cache.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
Every strate now generates through its operator stack: authored
definitions, cooked-season entries (recipe or native) and editor
composer candidates alike. The per-strate opt-in and the archetype
switch it guarded are gone.
- Remove UVoxelStrateDefinition::bUseOperatorStack and the season
wiring that set it; UsesOperatorStackForChunk now only says whether
the slot has a known archetype.
- GetDensityAt always builds a stack (composer, then recipe, then the
native archetype stack); a degenerate zero-height strate stays air.
- Remove the startup opt-in warning, the operator_stack startup-trace
field and the four "Cave Bail Not Op Stack" stats (the remaining
bail is counted by Cave Bail No Stack).
- Explore commandlet: drop -opstack and the operator_stack fields;
VoxelForgeTest.ps1 no longer passes -opstack=1.
- Tests: FTestWorld::Build loses its bool parameter; legacy-vs-stack
comparisons (MazeSeam, VerticalShaftSeam, TerrainDetailLiveness,
WorldEdgeSeal, TilePostReach) collapse to the single stack path.
This changes terrain for any strate asset that did not already have
the opt-in ticked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
The far sheet ring was already gone from the runtime; this removes what
was left of it:
- UVoxelSettings::bFarSheetRing / FarSheetSpanLevels, the
voxel.TestFarSheetRing switch, and their log/trace/dump fields.
- The sheet branch of VoxelClipmapDesiredTiles (FParameters sheet fields,
OuterShell sheet level, sheet ring emission). Output for the runtime
configuration (sheet off) is unchanged: same rings, same alignment.
- Tests: VerticalStrateReach now asserts the sheet-free selector (its
expected counts were stale since the aligned-ring change 85a803b:
LOD0 343 -> 512); ClipmapNoOverlap drops the sheet sweep cases and the
frozen 7486c29 oracle's sheet branch. New expected values were computed
with a Python port of the selector that reproduces the test's existing
635/594487 and 508/74295 measurements exactly; all 5,145 sweep cases
pass (no overlap, full coverage).
- Tools/VoxelForgeTest.ps1 no longer passes voxel.TestFarSheetRing or
reports far_sheet_ring. The sheet_tile dump field is kept (the parity
compare reads it).
Also removes settings nothing reads: CeilingViewMultiplier,
CeilingBandChunks (pre-clipmap ceiling band) and DensityVolumeMaxTasks
(the volume fill runs on its own thread). Saved assets that still carry
these values load normally; the values are ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
The single player-following water plane only uses the strate's
WaterMaterial; UVoxelBiomeDefinition::WaterMaterial is never read. The
design (§8.14 content profile) still lists it, so record the gap as an
open owner decision instead of silently dropping it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
ProcessDecoResults folds cell results into BuildId-matched region builds
(MergeCellResult) and applies whole regions under the per-frame budget;
there is no epoch guard on decoration results. Comment-only change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
Workers return tile results through CriticalProcessQueue,
EditedProcessQueue, NearProcessQueue or ProcessQueue (VoxelWorld.h), all
EQueueMode::Mpsc; the rule named only ProcessQueue. Rules and links are
otherwise unchanged (all links resolve, the other stated facts match the
code).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
- Replace the T2.b/T2.c/T2.d/F2 detail in the batch-3 note with a pointer:
those items are tracked in fable-idea.md (and ARCHITECTURE §8.10).
- Tick the 2026-09 cleanup under Dead code.
- New "Owner decisions" checklist: reflected settings/fields and plain
enums that nothing in Source/ reads but that assets, Blueprints, tools
or tests may reference by name, so they were kept (sheet-ring settings,
ceiling settings, DensityVolumeMaxTasks, unused audio/creature fields,
biome WaterMaterial, EVoxelFace / EVoxelSeasonSelectionReason /
EVoxelOpCombine, MaxDisplacement hooks).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
- Header: drop the false note that .gitignore ignores this file (the
whitelist keeps every *.md) and the "nothing here is implemented" line.
- Perf §0 / F3 ticked: stat VoxelForge group (VoxelStats.h) + Insights
scopes exist. F6 ticked (Stage 1): mesher writes FVoxelMeshData::Colors
from MaterialPaletteIndex (ARCHITECTURE §8.15). F7 marked partly done
(landmark AnchorMode/exclusion, FTerrainCondition, FDecoCompanion; SDF
stamps not built).
- F18 far-field sheets: marked REMOVED (owner decision) with what remains
(unused settings, runtime passes false).
- Suggested-order list annotated with what is done and what is open.
- T1.b status no longer repeats the dead-trio removal (tracked in
REVIEW_FINDINGS dead code).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
- §8.10 render-distance paragraph: remove the F18 far "sheet" ring
description (GenerateSheetMesh, SheetHole*, sheet re-queue). The ring
is plain level-MaxClipLevel MC tiles; bFarSheetRing/FarSheetSpanLevels
are documented as unused settings the runtime always passes as false.
All other §8.10 invariants are kept; the budgeted-teardown note now says
what UnloadTile does today (park the component), not ClearChunk.
- Fix the claim that GetLODForChunk/LODToStep/IsChunkInRange/
GetStrateChunkZBounds and the ViewDistance settings are dead (the first
three are gone, the last two are used); only the ceiling settings are.
- §8.5: decoration results are BuildId-guarded region builds applied by
ApplyRegion (no ReadyResults/DecoEpoch/ApplyDecoResult); water is one
player-following plane (UpdateWater), not per-tile planes; palette tags
are per-grid EntryBiome; FStrateSetPiece no longer "coming" (folded into
landmarks); drop the dead ContentMaxLevel/MaxLODLevel notes.
- §9.3: anchors fold in after the player clipmap (no sheet ring).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
- Refresh every numeric line hint in the §3 tables, the §4 pipeline step
anchors, the §5 "go here" table and the inline (h:NNN) / (NNN) hints;
most pointed at a much older file layout (e.g. AVoxelWorld at 12,
now 176; GetDensityWithParams at 277, now 3851).
- Remove rows/mentions of symbols that no longer exist: the far sheet
ring (GenerateSheetMesh, SheetHole*, sheet-tile routing in LoadTile and
BuildDesiredTiles), EvaluateSDF, the generator's ApplyPassageCarving
forwarder, VoxelTypes chunk-local helpers (LocalToIndex & co.,
CHUNK_SIZE_SQUARED/CHUNK_VOLUME), GetLODForChunk/LODToStep,
VF_RollStrateParams (now VF_RollStrateParamsDetailed), and the stale
AVoxelWorld storage list (Chunks/ChunkMeshes/ChunkLODs/PendingChunkCoord
-> LoadedTiles/TileComponents/PendingTiles + the four MPSC queues).
- bFarSheetRing / FarSheetSpanLevels are documented as unused settings.
- Add the 13 test files that were missing from §3.12.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
Rewrite comments that told the story of past rounds instead of the
current code: dated "fixed on / tried on / reverted on" notes, "this used
to...", "stale paragraph removed", "Phase 1/2" progress labels, and the
"ClassifyTile still does not use ClassifyBox" claim (it does now, via
VF_ClassifyBoxWithWarpRetry). Every invariant, unit, sign convention,
trap and measurement that justified the design is kept, rephrased in the
present tense and in its original language (French or English).
Also fix comments that named symbols removed in the dead-code commit
(EvaluateSDF wrapper, FTunnelCoreWorldEvaluation support-floor fields,
BlendChunks -> TransitionBlendChunks) and the stale function name in the
VF_RollStrateParamsDetailed determinism checkf message.
Comment and message text only; no code token changed. Tests untouched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
Remove three one-off investigation aids pinned to one seed/coordinate:
- [VoxelForgeExplore][TemporaryShaftConnectors] in the shaft connector
op's Eval (a thread_local flag + coordinate test in the density path);
- [VoxelForgeExplore][TemporaryVerticalLanding] in the vertical-shaft
landing search (seed 14, bottom Z -736 only);
- [VoxelForgeExplore][TemporaryShaftProbe] in the explore commandlet walk
mode (seed 14 VerticalShafts only; its own comment said it would be
removed once the seam was fixed).
No tool, test or script matches these tags (Tools/*.ps1 only parse
[VoxelForgeExplore][OwnerAssets] under that prefix). The probe's density
reads were log-only, so generated geometry and reports are unchanged.
All cvar-gated diagnostics and test result lines are kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
Each symbol below had zero references in Source/ (tests included), Tools/,
Config/ and the build files after comment/string stripping.
Functions: EvaluateTunnelCoreSDF, EvaluateSDF (uncached wrapper),
IsTunnelSupportFloorWorldPoint, BuildTunnelSupportFloorColumn,
IsTunnelSupportFloorColumnZ, GetTunnelSupportFloorColumnBand,
VF_TunnelFloorAtSegment, VF_ProjectSweptTunnelFloor, FVoxelWormField
EvaluateExact, ApplyPassageLandingAirMC, ApplyPassageTunnelAirMC,
GetGenerationParamsFingerprint, FVoxelStrateCorpus::LoadFromSettings,
GetSkippedDefinitions, VF_RollStrateParams, VF_ArePlayerFitConnectedWithSampler,
VF_GetVoxelSeasonSelectionReasonName, UVoxelSeasonAsset::GetManifestContentHash,
FVoxelStackSampler::IsRunning, CompareSkippedPostValue,
MakeSurfaceColumnSource, WriteObjTile, ExploreEffectName,
ExploreTileClassName, and the VoxelTypes.h chunk-local helpers
(WorldToLocalCoord, ChunkToWorldPos, LocalToIndex, IndexToLocal,
IsValidLocalCoord, GetFaceDirection, GetFaceNormal, CHUNK_SIZE_SQUARED,
CHUNK_VOLUME).
Members/types: write-only floor flags (FVoxelOpSample::
bProtectedStructuralFloor, StructuralFloorMinimumDensity,
bTunnelCoreSupportFloor; bSupportFloor on the tunnel evaluations;
FTunnelFloorSegmentProfile::NumSteps), UVoxelStrateManager::BlendChunks,
unused FSummary counters in the stack sampler, two unused
FVoxelSeasonCompositionSettings aliases, and a few unused locals/constants.
No UPROPERTY, UFUNCTION, reflected type or enum was touched. Behaviour is
unchanged: removed code was unreachable or only written, never read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01URDGLsu7c4nunqNFPJEFPU
The owner dropped the far sheet ring. Remove it from the streaming path:
- UVoxelMarchingCubesMesher::GenerateSheetMesh (declaration + definition);
- sheet-tile branches in LoadTile / GenerateTileResult / SyncRemeshTile and
the bSheetTile / SheetChunkZ / Hole* parameters;
- the SheetHole* XY-hole state and its per-crossing re-queue block;
- VF_MaxMarchingCubesLevel (equal to the clamped MaxClipLevel without sheets);
- the sheet-only band arming and the 'sheet' field of the desired-level
startup-trace events (no tool reads it).
AVoxelWorld now always passes bFarSheetRing=false to the tile selector, and
the descendant index covers levels up to the MaxClipLevel clamp (8) instead
of the old sheet maximum (12); no tile above 8 can exist any more.
Kept on purpose: UVoxelSettings::bFarSheetRing / FarSheetSpanLevels
(UPROPERTYs, now marked unused), the voxel.TestFarSheetRing switch and the
far_sheet_ring / sheet_tile fields the test harness compares (sheet_tile is
always false), and the selector's sheet parameters in
VoxelClipmapDesiredTiles.h, which two automation tests still exercise.
Move closed audits, task briefs, design rounds, perf reports, the OPSTACK
plan/progress logs and WORK-NEXT.md into Docs/archive/ (git mv, history kept).
Whitelist Docs/ in the strict .gitignore, ignore Tools/**/__pycache__/, and
remove the tracked .pyc. Repoint references in the kept docs and in non-test
source comments to the new paths.
- Passage proof bounds now enclose everything the passage code can write: separated switchback
legs, outward door approaches, native floor slabs with a derived relief supremum, and the final
body-envelope carve (segment XY extent + half-width, floor range + player height + step).
- ClassifyTile: the cave-only AllSolid shortcut could restore a solid verdict after a passage
carve candidate was found; it now keeps the tile mixed.
- Descent corridor test asserts no corridor stencil tile gets a uniform verdict.
Evidence: SealedSolidProofSoundness and ClassifyTileSoundness pass; 64 owner seeds, 0 body
blockers, 0 uniform stencil tiles, CRCs match. Negative control (passage reach shrunk to 4 voxels):
7 sealed-solid proofs among 620 corridor tiles, i.e. the check bites.
KNOWN COST, not fixed: tile profile, owner world, seed 0, 15 s window: passage-candidate tiles
83.6 ms (de05e29) -> 107.2 ms (+28%), all tiles +5.4%. Two segment-rejection filters did not help
and were removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
What the pillars were: at switchbacks the native-floor D-section clip in
UVoxelStrateManager::EvaluateModifierSDF used ONE floor branch (the nearest by projection) for
neighbouring capsule segments, so one leg's floor clipped the other leg's carve and left rock
standing in the corridor (seed 0 witness: density -29.45, carve SDF +3.28; with
voxel.TunnelAblateNativeFloor=1 the same point is air). Separately, the lower ramp was routed
through the lower landing room (sign error in the lower "outward" score), where room ownership
correctly erased the tunnel floor: up to 12.5-voxel drops.
Fix: each segment clips with its own floor branch before the union; switchback legs separated
and door approaches moved outward so ramps leave their landing rooms; a final carve clears the
player body envelope (1.36 + 2x1 voxel wide, 1.8..8.8 voxels above the route floor) after all
writers, with a room-SDF guard. No floor slab, no fill, no blockade on the through edge.
Owner world, 64-seed sweep, stations every 0.5 voxel x 5 lateral x 14 heights:
before 89,603 body blockers in 60/64 seeds; after 0 in 64/64, 0 floor/width gaps, worst step
0.958 voxels (limit 1.8). Seed 0 built twice: identical density CRC.
Crossing at default speed still stops on capsule_overlaps_pending_floor (also before); 500 cm/s
reaches B.
NOT YET CHECKED: sealed-solid / classifier soundness against the moved passage geometry, and the
generation cost of the per-segment projection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
The old criteria (travel distance) could not tell a working gate from a broken one: every run,
gate on or off, ended at (455.7, 0, -58.1). That spot is measured air ~1.2 m above a real floor
(density zero-crossing at world Z ~ -275.7 cm), so it is a terrain trap, not a fall-through.
The stress test now drops the pawn fast onto an unready support tile (0,0,-1) and samples the
density at the capsule feet every frame, sweeping at <= half a voxel between positions. PASS =
no measured clearance below -5 cm.
Owner config (radius 3, max level 6, distance 768, sheets off):
- gate on: 10/10 PASS, min clearance +120.5..+120.9 cm, one hold of 0.43-0.47 s each,
support submitted in ~0.7 ms, collision ready in 0.43-0.47 s
- gate off: 3/3 FAIL terrain_penetration, clearance -5.7..-8.1 cm
Edit-ghost, clipmap no-overlap sweep: pass. Test-harness code only; no production path changed.
This validates a49725d.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- RequestCollisionGateSupportTile submits the level-0 support tile immediately, even before the
first desired set; the desired rebuild adopts the same pending key (1 early request, 1 adoption,
1 ready callback in all 10 runs). First check -> submit went from ~2.2 s to ~1 us.
- The 2 s gate release timeout is removed: at the owner's startup the game thread applies nothing
for ~2.2 s, so the timeout always fired and dropped the pawn. The gate holds downward Z only;
horizontal movement stays free.
- Controls (previous round): legacy selector+reconcile failed the stress repro 0/5, aligned 1/5,
so 85a803b did not regress the gate.
NOT VALIDATED: the stress repro's pass criteria were rewritten (support submitted/ready, a hold,
progress during a hold). 10/10 "pass" under them, but every one of those runs, and the gate-
disabled run, ends stuck at (455.7, 0, -58.1), ~1.55 m below the Z~97-100 at which the old
passing runs travelled 113 m. Whether that spot is a real pit or the pawn below the surface is
unresolved; until it is, a pass under these criteria proves nothing about falling through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
- Clipmap: finer rings snap to child-pair boundaries, so no two desired tiles of different
levels overlap. Owner config 635 overlapping pairs -> 0; LOD0 ring 343 -> 512 tiles.
New test sweeps 6,174 cases; fails on 7486c29 as intended, passes here.
- Shared room-graph cache: Entry->Cache read/written only under the mutex (race fix).
- ReconcileReadyTransitionVisibility indexed: moving p95 32.0 ms -> 0.31 ms.
- Block-vs-scalar density equivalence test: 5.1M samples bit-identical; catches an injected
optimistic EffectOverBox (5,612 mismatches).
UNVALIDATED for merge: collision-gate stress passed 1 of 4 runs on this code (fails at 4.56 m,
support collision unready at start); it passed on 7486c29. No control run yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
The owner reported a wall staying visible after he carved through it, and overlapping LODs when crossing slopes at speed. Two causes: an edit only re-meshed the level-0 tiles of the touched chunks, so coarser tiles kept pre-edit geometry until something else re-queued them; and superseded tiles stayed drawn until the budgeted teardown reached them.
Now: edits fence late pre-edit async results and re-mesh every affected loaded/pending level; a replaced tile is hidden as soon as its replacement is fully covered, while destruction and collision removal stay budgeted (the anti-spike rule that made teardown budgeted in the first place). Load-before-unload is unchanged, so no holes.
Measured: edit ghost 40.095 s (unresolved at test exit) -> 0.172 s; 6000 cm/s slope overlap 19.952 s with 153 overlapping pairs -> 0.000 s with zero events. Gate stress PASS (113.68 m, 2 holds, 0 full stops). Apply-frame cost peaked at 0.979 ms against a 2 ms budget.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Scheduling rule: CollisionCritical -> Edited -> LOD0 -> Horizon, with coarse work capped so 4 task slots stay reserved for near work; result queues follow the same order; epoch and cancellation handling unchanged.
Measured at MaxClipLevel=5 / RenderDistanceChunks=768: spawn ring request-to-ready 53.632 s -> 1.171 s; spawn ring from trace start 68.252 -> 62.549 s; moving first complete ring 66.808 -> 63.917 s, warm ring p50 0.267 s, per-tile moving LOD0 p50 69.4 -> 62.0 ms; full settle of 10,841 tiles 110.7 -> 106.9 s. Gate stress PASS (139.99 m, 0 full stops); static perf PASS.
⚠️ NOT SAFE TO MERGE YET: the strate-crossing test fails in both patched runs with capsule_overlaps_pending_floor -- the exact guarantee the gate exists for. Codex suspects the owner's current DA_Settings (seal 50, clip level 5) rather than this change, since older passing captures used different settings. Control needed: same test, same assets, on 370c39e.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
The sheet system models terrain as one ground and one cap height per column, which cannot express this world's overhangs, floating islands and open sky; three attempts to fix the MC/sheet seam produced holes, then caps over the void, then both. Measured alternative: cover the render distance with real marching-cubes tiles and switch the far-sheet ring off.
Benchmarks at RenderDistanceChunks=768, all tiles loaded at steady state: L4 57,473 tiles / 30.1M tris / 837 MiB / 2,514 s worker / 296 s to settle; L5 10,841 / 8.1M / 226 MiB / 375 s / 108 s; L6 3,281 / 2.9M / 82 MiB / 127 s / 77 s. Defaults now MaxClipLevel=5, bFarSheetRing=false. Invariants: strate crossing PASS, gate stress PASS (140.06 m, 0 full stops), determinism PASS with 10,841 tile hashes identical vs -voxel.CrtFma3=0. Peak memory ~4.2 GiB in all three.
Owner action required: his DA_Settings still serializes MaxClipLevel=3 (asset edits are out of scope for Codex), so his world needs that value raised to 5 to use the new far field. At twice the distance the estimate is ~39.5k tiles / 29-30M tris / ~0.8 GiB / ~1,500 worker-seconds, which would want L6 rather than L5.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
ParameterRoll's 5 false box verdicts are fixed: fine room-graph intervals are now checked against exact lattice samples before a uniform verdict is accepted, while the SDF bound keeps its conservative lower bound. Lattice sweep 600 tiles / 0 violations; ParameterRoll passes with 9,577 exact lattice leaves and 774 interval disagreements caught.
The owner's ceiling holes are NOT explained by this: in his recorded session outer_classifier_mode=0, solid-proof skips were 0, and air-proof skips were outside the strate. The trace points at the far-field sheet system instead: sheet tile L5 (0,1,0) is deliberately empty inside the sheet hole while its bridge tile L4 (0,1,-1) meshed 662 ceiling triangles. Continuous ceiling is NOT verified: every render launch failed (D3D12 driver error, stalls before map load, the 6 GB cap), so the round produced no matched after-render.
Cost note: this round used 3.46M tokens on Luna 6 at max, most of it burned on failed render launches. Verification by render is unreliable in this harness; verify ceiling continuity from tile/geometry data instead.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MmSoF64BbRFmk9C3p1VsBJ
Fr0zkaandClaude Opus 5.5